Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTERROGATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Characterization of composite materials by means of the ultrasonic stress wave factor

The usual approach to nondestructively evaluating a composite structure involves inspection and mechanical analysis of the inspection results. Such an approach has met with only limited success. On the other hand, the ultrasonic stress wave factor technique directly evaluates the material. Despite requiring access to only one surface of the material, the technique interrogates the material in the directions of applied load. Using the stress wave factor technique it is possible to determine the failure location in the material. The correlation of the stress wave factor with stiffness is shown. In addition, the use of the technique for determining the strength or life of composite material structures is discussed.

Duke, J. C., Jr.↗

The NASA data systems standardization program - Radio frequency and modulation

The modifications being considered by the NASA-ESA Working Group (NEWG) for space-data-systems standardization to maximize the commonality of the NASA and ESA RF and modulation systems linking spaceborne scientific experiments with ground stations are summarized. The first phase of the NEWG project shows that the NASA MK-IVA Deep Space Network and Shuttle Interrogator (SI) systems in place or planned for 1985 are generally compatible with the ESA Network, but that communications involving the Tracking and Data Relay Satellite (TDRS) are incompatible due to its use of spread-spectrum modulation, pseudonoise ranging, multiple-access channels, and Mbit/s data rates. Topics under study for the post-1985 period include low-bit-rate capability for the ESA Network, an optional 8-kHz command subcarrier for the SI, fixing the spacecraft-transponder frequency-multiplication ratios for possible X-band uplinks or X-band nondeep-space downlinks, review of incompatible TDRS features, and development of the 32-GHz band.

Martin, W. L.↗

Obtaining One-Degree Accuracy With Shaft Encoders

Circuit converts output of 1-pulse-per-revolution shaft encoder to precise 360-pulses-per-revolution output. Circuit allows shaft angular position to be measured with 1-degree accuracy. With simple modifications, circuit provides higher or lower resolution from single- or multiple-pulse-perrevolution sources. Circuit used to synchronize aircraft beacon transponder-based plan-position indicator (PPI) display to remote host interrogator search antenna. Constructed using standard, commercially available components.

Franke, J. M.↗

Building a functional, integrated GIS/remote sensing resource analysis and planning system

To be an effective tool for resource analysis and planning, a geographic information system (GIS) needs to be integrated with a digital remote sensing capability. To be truly functional, the paired system must be driven by grass roots local needs. A case study couched in a Soil Conservation District in northern Utah is presented. Agency representatives determined that the most fundamental data sets to be entered into the GIS system analysis system in the first round were: land use/land cover; geomorphic/soil unit data; hydrologic unit data; and digital terrain. The least expensive and best ways to obtain these data were determined. Data were acquired and formatted to enter the state's PRIME/ARC-INFO GIS, and are being interrogated for resource management decisions related to such issues as agricultural preservation, urban expansion, soil erosion control, and dam siting.

Ridd, M. K.↗

Study to determine potential flight applications and human factors design guidelines for voice recognition and synthesis systems

A study was conducted to determine potential commercial aircraft flight deck applications and implementation guidelines for voice recognition and synthesis. At first, a survey of voice recognition and synthesis technology was undertaken to develop a working knowledge base. Then, numerous potential aircraft and simulator flight deck voice applications were identified and each proposed application was rated on a number of criteria in order to achieve an overall payoff rating. The potential voice recognition applications fell into five general categories: programming, interrogation, data entry, switch and mode selection, and continuous/time-critical action control. The ratings of the first three categories showed the most promise of being beneficial to flight deck operations. Possible applications of voice synthesis systems were categorized as automatic or pilot selectable and many were rated as being potentially beneficial. In addition, voice system implementation guidelines and pertinent performance criteria are proposed. Finally, the findings of this study are compared with those made in a recent NASA study of a 1995 transport concept.

White, R. W.↗

Program for Experimentation With Expert Systems

CERBERUS is forward-chaining, knowledge-based system program useful for experimentation with expert systems. Inference-engine mechanism performs deductions according to user-supplied rule set. Information stored in intermediate area, and user interrogated only when no applicable data found in storage. Each assertion posed by CERBERUS answered with certainty ranging from 0 to 100 percent. Rule processor stops investigating applicable rules when goal reaches certainty of 95 percent or higher. Capable of operating for wide variety of domains. Sample rule files included for animal identification, pixel classification in image processing, and rudimentary car repair for novice mechanic. User supplies set of end goals or actions. System complexity decided by user's rule file. CERBERUS written in FORTRAN 77.

Engle, S. W.↗

The GOES-G and -H spacecraft design

The design of the Geostationary Operational Environmental Satellites (GOES) uses newer technology and has expanded capability relative to the predecessor GOES series of satellites. The satellite directly transmits day and night observations of hemispheric-scale weather, hurricanes, and other more localized severe storms and relays processed high-resolution observation data along with weather facsimile (WEFAX) data. Weather observations are generated in the visible and infrared spin scan radiometer (VISSR) atmospheric sounder (VAS). The VAS performs visible and infrared imaging as well as multispectral imaging (MSI) and temperature sounding of the atmosphere. The satellite provides direct interrogation and simultaneous relay transmission between the command data acquisition station (CDAS) and the multiple, widely dispersed data collection platforms (DCP). The satellites also monitor the condition of the earth's magnetic field, energetic particle flux, and X-ray emissions from the sun. The satellite performs all communications functions by means of a multifunction communications system that operates on S-band and uhf frequencies at rates varying from 100 bit/s to 28 megabit/s. An experimental capability for the detection of the emergency locator transmitter beacons is included in the GOES-GH design as a part of the international satellite-aided search and rescue system.

Fermelia, L. R.↗

Portable-Beacon Landing System for Helicopters

Prototype beacon landing system (BLS) allows helicopters to make precise landings in all weather. BLS easily added to existing helicopter avionic equipment and readily deployed at remote sites. Small and light, system employs X-band radar and digital processing. Variety of beams pulsed sequentially by ground station after initial interrogation by weather radar of approaching helicopter. Airborne microprocessor processes pulses to determine glide slope, course deviation, and range.

Davis, Thomas J.↗

Comparison of measured and modeled radiation, heat and water vapor fluxes: FIFE pilot study

The feasibility of using radio frequency receivers to collect data from automated weather stations to model fluxes of latent heat, sensible heat, and radiation using routine weather data collected by automated weather stations was tested and the estimated fluxes were compared with fluxes measured over wheat. The model Cupid was used to model the fluxes. Two or more automated weather stations, interrogated by radio frequency and other means, were utilized to examine some of the climatic variability of the First ISLSCP (International Satellite Land-Surface Climatology Project) Field Experiment (FIFE) site, to measure and model reflected and emitted radiation streams from various locations at the site and to compare modeled latent and sensible heat fluxes with measured values. Some bidirectional reflected and emitted radiation data were collected from 23 locations throughout the FIFE site. Analysis of these data along with analysis of the measured sensible and latent heat fluxes is just beginning.

Blad, Blaine L.↗

The CCD/Transit Instrument (CTI) data-analysis system

An account is given of the Kitt Peak CCD/Transit Instrument's software for the automated archiving, analysis, and interrogation of each observation night's nearly 450 Mbytes of image data. The analysis phase is performed by a pair of linked algorithms, one of which operates on the absolute pixel-values and the other on the spatial derivative of the data, so that both isolated and merged images are reliably detected in a single pass. This is in due course followed by the automatic comparison of each new detection with a set of predefined templates in parameter space, in order to find such interesting objects as supernovae, quasars, and variable stars.

Cawson, M. G. M.↗

Electronic Neural-Network Simulator

Experimental circuits faster than simulation programs run on digital computers. Serial shift register routes clock pulses C1 to neurons in sequence. Clock pulses C2 interrogate neurons. Neuron interconnection information stored in simulated synapses. Can be expanded to greater complexity.

Moopenn, Alex W.↗

Concept of a programmable maintenance processor applicable to multiprocessing systems

A programmable maintenance processor concept applicable to multiprocessing systems has been developed at the NASA Ames Research Center's Dryden Flight Research Facility. This stand-alone-processor is intended to provide support for system and application software testing as well as hardware diagnostics. An initial machanization has been incorporated into the extended aircraft interrogation and display system (XAIDS) which is multiprocessing general-purpose ground support equipment. The XAIDS maintenance processor has independent terminal and printer interfaces and a dedicated magnetic bubble memory that stores system test sequences entered from the terminal. This report describes the hardware and software embodied in this processor and shows a typical application in the check-out of a new XAIDS.

Glover, Richard D.↗

Detection of bondline delaminations in multilayer structures with lossy components

The detection of bondline delaminations in multilayer structures using ultrasonic reflection techniques is a generic problem in adhesively bonded composite structures such as the Space Shuttles's Solid Rocket Motors (SRM). Standard pulse echo ultrasonic techniques do not perform well for a composite resonator composed of a resonant layer combined with attenuating layers. Excessive ringing in the resonant layer tends to mask internal echoes emanating from the attenuating layers. The SRM is made up of a resonant steel layer backed by layers of adhesive, rubber, liner and fuel, which are ultrasonically attenuating. The structure's response is modeled as a lossy ultrasonic transmission line. The model predicts that the acoustic response of the system is sensitive to delaminations at the interior bondlines in a few narrow frequency bands. These predictions are verified by measurements on a fabricated system. Successful imaging of internal delaminations is sensitive to proper selection of the interrogating frequency. Images of fabricated bondline delaminations are presented based on these studies.

Madaras, Eric I.↗

Fiber optic sensor technology - An opportunity for smart aerospace structures

Fiber optic sensors provide the opportunity for fabricating materials with internal sensors which can serve as lifetime health monitors, analogous to a central nervous system. The embedded fiber optic sensors can be interrogated by various techniques to measure internal strain, temperature, pressure, acoustic waves and other parameters indicative of structural integrity. Experiments have been conducted with composite samples with embedded sensors to measure strain using optical time domain reflectometry, modal interference and an optical phase locked loop. Fiber optic sensors have been developed to detect acoustic emission and impact damage and have been demonstrated for cure monitoring. These sensors have the potential for lifetime monitoring of structural properties, providing real time nondestructive evaluation.

Heyman, J. S.↗

General-Purpose Electronic System Tests Aircraft

Versatile digital equipment supports research, development, and maintenance. Extended aircraft interrogation and display system is general-purpose assembly of digital electronic equipment on ground for testing of digital electronic systems on advanced aircraft. Many advanced features, including multiple 16-bit microprocessors, pipeline data-flow architecture, advanced operating system, and resident software-development tools. Basic collection of software includes program for handling many types of data and for displays in various formats. User easily extends basic software library. Hardware and software interfaces to subsystems provided by user designed for flexibility in configuration to meet user's requirements.

Glover, Richard D.↗

Physical principles of ultrasonic non-destructive evaluation of advanced composites

Results are presented from the continued investigations into the use of ultrasonic measurement techniques for the detection and characterization of porosity. The effects that bleeder cloth impressions (left after the cure process) have on the capability of polar backscatter to interrogate volume effects such as porosity are described. Some preliminary data regarding a comparison of phase sensitive and phase insensitivie detection for materials characterization is presented.

Miller, James G.↗

Towards a knowledge-based system to assist the Brazilian data-collecting system operation

A study is reported which was carried out to show how a knowledge-based approach would lead to a flexible tool to assist the operation task in a satellite-based environmental data collection system. Some characteristics of a hypothesized system comprised of a satellite and a network of Interrogable Data Collecting Platforms (IDCPs) are pointed out. The Knowledge-Based Planning Assistant System (KBPAS) and some aspects about how knowledge is organized in the IDCP's domain are briefly described.

Rodrigues, Valter↗

Object-oriented fault tree evaluation program for quantitative analyses

Object-oriented programming can be combined with fault free techniques to give a significantly improved environment for evaluating the safety and reliability of large complex systems for space missions. Deep knowledge about system components and interactions, available from reliability studies and other sources, can be described using objects that make up a knowledge base. This knowledge base can be interrogated throughout the design process, during system testing, and during operation, and can be easily modified to reflect design changes in order to maintain a consistent information source. An object-oriented environment for reliability assessment has been developed on a Texas Instrument (TI) Explorer LISP workstation. The program, which directly evaluates system fault trees, utilizes the object-oriented extension to LISP called Flavors that is available on the Explorer. The object representation of a fault tree facilitates the storage and retrieval of information associated with each event in the tree, including tree structural information and intermediate results obtained during the tree reduction process. Reliability data associated with each basic event are stored in the fault tree objects. The object-oriented environment on the Explorer also includes a graphical tree editor which was modified to display and edit the fault trees.

Patterson-Hine, F. A.↗