Search NASA⌕ Search

SEARCH · Search NASA

Results for “MONOCRYSTALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Enhanced photocatalytic efficiency in zirconia buffered n-NiO/p-NiO single crystalline heterostructures by nanosecond laser treatment

We report the formation of NiO based single crystalline p-n junctions with enhanced photocatalytic activity induced by pulsed laser irradiation. The NiO epilayers were grown on Si(001) substrates buffered with cubic yttria-stabilized zirconia (c-YSZ) by using pulsed laser deposition. The NiO/c-YSZ/Si heterostructures were subsequently laser treated by 5 pulses of KrF excimer laser (pulse duration = 25 Multiplication-Sign 10{sup -9} s) at lower energies. Microstructural studies, conducted by X-ray diffraction ({theta}-2{theta} and {phi} techniques) and high resolution transmission electron microscope, showed a cube-on-cube epitaxial relationship at the c-YSZ/Si interface; the epitaxial relationship across the NiO/c-YSZ interface was established as NiO<111 > Double-Vertical-Line Double-Vertical-Line c-YSZ<001> and in-plane NiO<110> Double-Vertical-Line Double-Vertical-Line c-YSZ<100>. Electron microscopy studies showed that the interface between the laser annealed and the pristine region as well as the NiO/c-YSZ interface was atomically sharp and crystallographically continuous. The formation of point defects, namely oxygen vacancies and NiO, due to the coupling of the laser photons with the NiO epilayers was confirmed by XPS. The p-type electrical characteristics of the pristine NiO epilayers turned to an n-type behavior and the electrical conductivity was increased by one order of magnitude after laser treatment. Photocatalytic activity of the pristine (p-NiO/c-YSZ/Si) and the laser-annealed (n-NiO/p-NiO/c-YSZ/Si) heterostructures were assessed by measuring the decomposition rate of 4-chlorophenol under UV light. The photocatalytic reaction rate constants were determined to be 0.0059 and 0.0092 min{sup -1} for the as-deposited and the laser-treated samples, respectively. The enhanced photocatalytic efficiency was attributed to the suppressed charge carrier recombination in the NiO based p-n junctions and higher electrical conductivity. Besides, the oxygen vacancies ease the adsorption of 4-chlorophenol, hydroxyl, and water molecules to the surface. Thus, n-NiO/p-NiO single crystalline catalysts can be introduced as a potent candidate to remediate the environmental pollution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Population dynamics in epitaxial Er{sub 2}O{sub 3} thin films grown on Si(111)

We grow single crystal erbium-oxide (Er{sub 2}O{sub 3}) epitaxially on a Si (111) substrate by using molecular beam epitaxy and investigate the population dynamics in Er{sup 3+} ions for the coherent manipulation of the population in Er{sub 2}O{sub 3}. Sharp and discrete Stark energy levels of the {sup 4}I{sub 13/2} manifold as small as 200 {mu}eV are observed with inhomogeneous broadening caused by the uniform crystal field of the epitaxial Er{sub 2}O{sub 3}. We also experimentally determine the time constant of the resonant population transfer between spatially distant Er{sup 3+}-ion sites, which is limited to the manipulation time of the population in the Er{sub 2}O{sub 3} crystals. Using selective excitation of the Stark level in the {sup 4}I{sub 13/2} manifold, we obtain the energy transfer times between spatially distant Er{sup 3+} ions, and they are about 2 {mu}s between sites whose crystallographic symmetry is different and 10 {mu}s between sites whose symmetry is the same.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of surface oxide formation on germanium nanowire band-edge photoluminescence

The effect of intentional surface oxide formation on band-edge photoluminescence (PL) of Ge nanowires was investigated. Thermal oxidation in molecular O{sub 2} was used to produce a surface oxide layer on assemblies of single crystal nanowires grown by the vapor-liquid-solid method. With increasing oxidation of the wires, the band-edge PL associated with the indirect gap transition becomes more intense. X-ray photoelectron spectroscopy confirms the formation of an increasingly GeO{sub 2}-like surface oxide under annealing conditions that enhance the indirect-gap PL, consistent with surface oxide passivation of nonradiative recombination centers initially present on the nanowire surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanostructuring superconductors by ion beams: A path towards materials engineering

The paper deals with nanostructuring of superconducting materials by means of swift heavy ion beams. The aim is to modify their structural, optical and electromagnetic properties in a controlled way, to provide possibility of making them functional for specific applications. Results are presented concerning flux pinning effects (implantation of columnar defects with nanosize cross section to enhance critical currents and irreversibility fields), confined flux-flow and vortex guidance, design of devices by locally tailoring the superconducting material properties, analysis of disorder-induced effects in multi-band superconductors. These studies were carried out on different kinds of superconducting samples, from single crystals to thin films, from superconducting oxides to magnesium diboride, to recently discovered iron-based superconductors.

36 MATERIALS SCIENCE↗

Electronic properties of graphene-single crystal diamond heterostructures

Single crystal diamond has been used as a substrate to support single layer graphene grown by chemical vapor deposition methods. It is possible to chemically functionalise the diamond surface, and in the present case H-, F-, O-, and N-group have been purposefully added prior to graphene deposition. The electronic properties of the resultant heterostructures vary strongly; a p-type layer with good mobility and a band gap of ∼0.7 eV is created when H-terminated diamond layers are used, whilst a layer with more metallic-like character (high carrier density and low carrier mobility) arises when N(O)-terminations are introduced. Since it is relatively easy to pattern these functional groups on the diamond surface, this suggests that this approach may offer an exciting route to 2D device structures on single layer graphene sheets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth, disorder, and physical properties of ZnSnN{sub 2}

We examine ZnSnN{sub 2}, a member of the class of materials contemporarily termed “earth-abundant element semiconductors,” with an emphasis on evaluating its suitability for photovoltaic applications. It is predicted to crystallize in an orthorhombic lattice with an energy gap of 2 eV. Instead, using molecular beam epitaxy to deposit high-purity, single crystal as well as highly textured polycrystalline thin films, only a monoclinic structure is observed experimentally. Far from being detrimental, we demonstrate that the cation sublattice disorder which inhibits the orthorhombic lattice has a profound effect on the energy gap, obviating the need for alloying to match the solar spectrum.

36 MATERIALS SCIENCE↗

Lattice constant and substitutional composition of GeSn alloys grown by molecular beam epitaxy

Single crystal epitaxial Ge{sub 1−x}Sn{sub x} alloys with atomic fractions of tin up to x = 0.145 were grown by solid source molecular beam epitaxy on Ge (001) substrates. The Ge{sub 1−x}Sn{sub x} alloys formed high quality, coherent, strained layers at growth temperatures below 250 °C, as shown by high resolution X-ray diffraction. The amount of Sn that was on lattice sites, as determined by Rutherford backscattering spectrometry channeling, was found to be above 90% substitutional in all alloys. The degree of strain and the dependence of the effective unstrained bulk lattice constant of Ge{sub 1−x}Sn{sub x} alloys versus the composition of Sn have been determined.

36 MATERIALS SCIENCE↗

Magnetic properties of Mn{sub 3}O{sub 4} film under compressive stress grown on MgAl{sub 2}O{sub 4} (001) by molecular beam epitaxy

High quality single-crystalline Mn{sub 3}O{sub 4} thin films were grown on MgAl{sub 2}O{sub 4} (001) substrates by plasma-assisted molecular beam epitaxy. It is found that the films are compressed in the (001) plane and elongated in the perpendicular direction via in-situ reflection high-energy electron diffraction and ex-situ X-ray diffraction, which is confirmed by frequency hardening of relevant Raman bands. Different from the bulk, the epitaxial film with a thickness of 65 nm shows more obvious magnetic anisotropy and higher magnetic phase transition temperatures (T{sub N} = 50 K, T{sub 1} = 40.5 K, and T{sub 2} = 36 K) than that of the bulk (T{sub N} = 42 K, T{sub 1} = 39 K, and T{sub 2} = 33 K). The variation of magnetic properties could be attributed to the changes of interplay among spin, orbital, and lattice degrees of freedom owing to the residual strain in the epitaxial film.

36 MATERIALS SCIENCE↗

Giant secondary grain growth in Cu films on sapphire

Single crystal metal films on insulating substrates are attractive for microelectronics and other applications, but they are difficult to achieve on macroscopic length scales. The conventional approach to obtaining such films is epitaxial growth at high temperature using slow deposition in ultrahigh vacuum conditions. Here we describe a different approach that is both simpler to implement and produces superior results: sputter deposition at modest temperatures followed by annealing to induce secondary grain growth. We show that polycrystalline as-deposited Cu on α-Al{sub 2}O{sub 3}(0001) can be transformed into Cu(111) with centimeter-sized grains. Employing optical microscopy, x-ray diffraction, and electron backscatter diffraction to characterize the films before and after annealing, we find a particular as-deposited grain structure that promotes the growth of giant grains upon annealing. To demonstrate one potential application of such films, we grow graphene by chemical vapor deposition on wafers of annealed Cu and obtain epitaxial graphene grains of 0.2 mm diameter.

36 MATERIALS SCIENCE↗

Pyroelectric field assisted ion migration induced by ultraviolet laser irradiation and its impact on ferroelectric domain inversion in lithium niobate crystals

The impact of UV laser irradiation on the distribution of lithium ions in ferroelectric lithium niobate single crystals has been numerically modelled. Strongly absorbed UV radiation at wavelengths of 244–305 nm produces steep temperature gradients which cause lithium ions to migrate and result in a local variation of the lithium concentration. In addition to the diffusion, here the pyroelectric effect is also taken into account which predicts a complex distribution of lithium concentration along the c-axis of the crystal: two separated lithium deficient regions on the surface and in depth. The modelling on the local lithium concentration and the subsequent variation of the coercive field are used to explain experimental results on the domain inversion of such UV treated lithium niobate crystals.

36 MATERIALS SCIENCE↗

The interaction of 193-nm excimer laser radiation with single-crystal zinc oxide: The generation of atomic Zn line emission at laser fluences below breakdown

The production of gas phase atomic and ionic line spectra accompanying the high laser fluence irradiation of solid surfaces is well known and is most often due to the production and interaction of high densities of atoms, ions, and electrons generated from laser-induced breakdown. The resulting plasma expands and moves rapidly away from the irradiated spot and is accompanied by intense emission of light. This type of “plume” is well studied and is frequently exploited in the technique of chemical analysis known as laser induced breakdown spectroscopy. Here, we describe a similar but weaker emission of light generated in vacuum by the laser irradiation of single crystal ZnO at fluences well below breakdown; this emission consists entirely of optical line emission from excited atomic Zn. We compare the properties of the resulting laser-generated gas-phase light emission (above and below breakdown) and describe a mechanism for the production of the low-fluence optical emission resulting from a fortuitous choice of material and laser wavelength.

36 MATERIALS SCIENCE↗

Radiation-assisted Frenkel-Poole transport in single-crystal diamond

The measurement of the density of occupied states as a function of the applied electric field, performed on single-crystal chemical vapour deposition diamond by x-ray modulated photocurrent technique, is reported. Two regimes of non-linear charge transport were observed: a classical Frenkel-Poole (FP) process at high electric fields (>6800 V/cm), and a radiation-assisted transport mechanism at intermediate electric fields (2000 to 6800 V/cm), consisting of a double-step process in which the direct re-emission into the extended band occurs following multiple photo-induced FP-like hopping transitions.

36 MATERIALS SCIENCE↗

Electrical properties of scandium nitride epitaxial films grown on (100) magnesium oxide substrates by molecular beam epitaxy

Scandium nitride (ScN) films were grown on (100) MgO single crystals by a molecular beam epitaxy method. The effects of growth conditions, including [Sc]/[N] ratio, growth temperature, and nitrogen radical state, on the electrical properties of the ScN films were studied. The ScN films comprised many small columnar grains. Hall coefficient measurements confirmed that the ScN films were highly degenerate n-type semiconductors and that the carrier concentration of the ScN films was sensitive to the growth temperature and the nitrogen radical states during the film growth. The carrier concentrations of the ScN films ranged from 10{sup 19}–10{sup 21} cm{sup −3} while the Hall mobilities ranged from 50–130 cm{sup 2}·V{sup −1}·s{sup −1} for undoped films. The temperature-dependent Hall coefficient measurements showed that the carrier concentration is nearly independent of temperature, indicating that the change in resistivity with temperature is explained by a change in the Hall mobility. The temperature-dependence of the Hall mobility was strongly affected by the growth conditions.

36 MATERIALS SCIENCE↗

Super-thin single crystal diamond membrane radiation detectors

We propose to use the non-electronic grade (nitrogen content 5 ppb < [N] < 5 ppm) single crystal (sc) chemical vapour deposited (CVD) diamond as a thin-membrane radiation detector. Using deep Ar/O{sub 2} plasma etching it is possible to produce self-supported few micrometres thick scCVD membranes of a size approaching 7 mm × 7 mm, with a very good surface quality. After metallization and contacting, electrical properties of diamond membrane detectors were probed with 5.486 MeV α-particles as an ionization source. Despite nitrogen impurity, scCVD membrane detectors exhibit stable operation, charge collection efficiency close to 100%, with homogenous response, and extraordinary dielectric strength up to 30 V/μm.

36 MATERIALS SCIENCE↗

Surface electronic structure for various surface preparations of Nb-doped SrTiO{sub 3} (001)

High-resolution angle-resolved photoemission spectroscopy (ARPES) was used to study the surface electronic structure of Nb-doped SrTiO{sub 3} (STO) single crystals prepared using a variety of surface preparations. ARPES measurements show that simple degreasing with subsequent anneal in vacuum is not an adequate surface preparation of STO, rather, preparations consisting of etching with buffered HF or HCl, and to a lesser extent, simple water leaching resulted in surfaces with much less disorder. A non-dispersing, mid-gap state was found ∼800 meV above the top of the valence band for samples which underwent etching. This mid-gap state is not present for vacuum-annealed and water-leached samples, as well as for STO thin films grown using molecular beam epitaxy. Theoretical modeling using density functional theory suggests that this mid-gap state is not related to the SrO- and TiO{sub 2}-terminated surfaces, but rather, is due to a partial hydrogenation of the STO surface that occurs during etching.

36 MATERIALS SCIENCE↗

Supersaturating silicon with transition metals by ion implantation and pulsed laser melting

We investigate the possibility of creating an intermediate band semiconductor by supersaturating Si with a range of transition metals (Au, Co, Cr, Cu, Fe, Pd, Pt, W, and Zn) using ion implantation followed by pulsed laser melting (PLM). Structural characterization shows evidence of either surface segregation or cellular breakdown in all transition metals investigated, preventing the formation of high supersaturations. However, concentration-depth profiling reveals that regions of Si supersaturated with Au and Zn are formed below the regions of cellular breakdown. Fits to the concentration-depth profile are used to estimate the diffusive speeds, v{sub D,} of Au and Zn, and put lower bounds on v{sub D} of the other metals ranging from 10{sup 2} to 10{sup 4} m/s. Knowledge of v{sub D} is used to tailor the irradiation conditions and synthesize single-crystal Si supersaturated with 10{sup 19} Au/cm{sup 3} without cellular breakdown. Values of v{sub D} are compared to those for other elements in Si. Two independent thermophysical properties, the solute diffusivity at the melting temperature, D{sub s}(T{sub m}), and the equilibrium partition coefficient, k{sub e}, are shown to simultaneously affect v{sub D}. We demonstrate a correlation between v{sub D} and the ratio D{sub s}(T{sub m})/k{sub e}{sup 0.67}, which is exhibited for Group III, IV, and V solutes but not for the transition metals investigated. Nevertheless, comparison with experimental results suggests that D{sub s}(T{sub m})/k{sub e}{sup 0.67} might serve as a metric for evaluating the potential to supersaturate Si with transition metals by PLM.

36 MATERIALS SCIENCE↗

Orientation-dependent piezoelectric properties in lead-free epitaxial 0.5BaZr{sub 0.2}Ti{sub 0.8}O{sub 3}-0.5Ba{sub 0.7}Ca{sub 0.3}TiO{sub 3} thin films

Orientation-engineered 0.5BaZr{sub 0.2}Ti{sub 0.8}O{sub 3}-0.5Ba{sub 0.7}Ca{sub 0.3}TiO{sub 3} (BZT-BCT) thin films were deposited on La{sub 0.7}Sr{sub 0.3}MnO{sub 3}-coated SrTiO{sub 3} single-crystalline (001), (110), and (111) substrates by off-axis radio-frequency magnetron sputtering. X-ray diffraction confirmed a highly epitaxial growth of all the as-deposited films. It is believed the strong orientation dependence of ferroelectric and piezoelectric properties on the films is attributed to the relative alignment of crystallites and spontaneous polarization vector. The optimal ferroelectric response lies in the [001] direction, whereas a comparatively large effective piezoelectric coefficient d{sub 33,eff} of 100.1 ± 5 pm/V was attained in [111] BZT-BCT thin film, suggesting its potential application for high-performance lead-free piezoelectric devices.

36 MATERIALS SCIENCE↗

Direct writing of ferroelectric domains on strontium barium niobate crystals using focused ultraviolet laser light

We report ferroelectric domain inversion in strontium barium niobate (SBN) single crystals by irradiating the surface locally with a strongly focused ultraviolet (UV) laser beam. The generated domains are investigated using piezoresponse force microscopy. We propose a simple model that allows predicting the domain width as a function of the irradiation intensity, which indeed applies for both SBN and LiNbO{sub 3}. Evidently, though fundamentally different, the domain structure of both SBN and LiNbO{sub 3} can be engineered through similar UV irradiation.

36 MATERIALS SCIENCE↗