Search NASA⌕ Search

SEARCH · Search NASA

Results for “Materials Effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96
All sourcesNASA NTRSDOE OSTI
NASA NTRS2026

Artemis Suit Material Optical Property Testing of Dust Exposed Fabrics

This paper highlights one aspect of NASA’s ongoing technology-infusion effort to design, fabricate, and test a next-generation outer shell fabric for a lunar Extravehicular Activity (EVA) space suit, a critical component of sustained lunar exploration. Managing thermal loads on the Moon is essential for astronaut safety and suit performance. The suit’s exterior fabric directly influences heat gain and loss through its optical properties: low solar absorptivity minimizes sunlight absorption, while high infrared emissivity aids radiative cooling. Lunar regolith complicates this balance. Its fine, abrasive particles possess unique optical behavior that can lower reflectivity and raise emissivity when embedded in or adhered to fabric surfaces, degrading thermal control and increasing the risk of overheating or cooling inefficiency. To quantify these effects, the Artemis Suit Materials (ASM) team measured solar absorptance and infrared emissivity of clean and dust-soiled Ortho Fabric, establishing beginning-of-life (BOL) and end-of-life (EOL) benchmarks. EOL conditions were simulated with a rotary tumbler abrasion process using lunar dust simulant and ceramic media to reproduce cumulative wear expected during surface operations. Tests also included unmodified fabrics and a fabric/film laminate system containing titanium dioxide to evaluate potential improvements in dust resistance and optical performance. Results from these evaluations provide critical insight into how lunar dust alters fabric thermal behavior and inform the design of bespoke suit materials that maintain required optical properties throughout mission life, supporting safe and effective long-duration EVA on the lunar surface.

Textile↗
NASA NTRS2024

The Effect of Impingement Angle on Bipropellant Thruster Plume Degradation of Spacecraft Materials

Unburned and partially combusted liquid propellant present in bipropellant thruster plumes can contaminate and damage external spacecraft materials. Microscopic impact features due to high-speed droplet impacts have been observed on space shuttle flight experiments and International Space Station (ISS) returned flight hardware. Analytical results have shown that particle impingement angle greatly affects surface damage, with normal impacts being the most severe and highly oblique impacts being more benign. The effect of thruster plume impingement angle on material degradation has now been further studied following a bipropellant thruster plume test performed at the high-vacuum plume test facility for chemical thrusters at DLR Göttingen, STG-CT. Several spacecraft material samples were exposed to the freely expanding pulsed thruster plume at a range of impingement angles (from 0 to 75 deg). Results of post-test evaluations and potential spaceflight applications are summarized.

Gateway↗
NASA NTRSDate not supplied

The Effect of Impingement Angle on Bipropellant Thruster Plume Degradation of Spacecraft Materials

Unburned and partially combusted liquid propellant present in bipropellant thruster plumes can contaminate and damage external spacecraft materials. Microscopic impact features due to high-speed droplet impacts have been observed on space shuttle flight experiments and International Space Station (ISS) returned flight hardware. Analytical results have shown that particle impingement angle greatly affects surface damage, with normal impacts being the most severe and highly oblique impacts being more benign. The effect of thruster plume impingement angle on material degradation has now been further studied following a bipropellant thruster plume test performed at the high-vacuum plume test facility for chemical thrusters at DLR Göttingen, STG-CT. Several spacecraft material samples were exposed to the freely expanding pulsed thruster plume at a range of impingement angles (from 0 to 75 deg). Results of post-test evaluations and potential spaceflight applications are summarized.

Gateway↗
NASA NTRS1971

Radiation tolerance of aluminum-doped silicon

Data are presented that indicate that heat-treated Czochralski-grown aluminum doped silicon that undergoes an appreciable resistivity increase during heating at approximately 450 C is significantly more resistant to both neutron and gamma irradiation than boron doped material (or aluminum doped material that either has not been heat treated or does not experience an appreciable resistivity change during such a treatment). Data interpretation is, however, quite difficult due to the occurrence of severe trapping effects in heat treated material.

Curtis, O. L., Jr.↗
NASA NTRS1981

Geologic application of thermal inertia imaging using HCMM data

Three test sites in the western US were selected to discriminate among surface geologic materials on the basis of their thermal properties as determined from HCMM data. Attempts to determine quantitatively accurate thermal inertia values from HCMM digital data met with only partial success due to the effects of sensor miscalibrations, radiative transfer in the atmosphere, and varying meteorology and elevation across a scene. In most instances, apparent thermal inertia was found to be an excellent qualitative representation of true thermal inertia. Computer processing of digital day and night HCMM data allowed construction of geologically useful images. At some test sites, more information was provided by data than LANDSAT data. Soil moisture effects and differences in spectrally dark materials were more effectively displayed using the thermal data.

Kahle, A. B.↗
NASA NTRS2006

Enhancing Icing Training for Pilots Through Web-Based Multimedia

The Aircraft Icing Project of the NASA Aviation Safety Program has developed a number of in-flight icing education and training aids designed to increase pilot awareness about the hazards associated with various icing conditions. The challenges and advantages of transitioning these icing training materials to a Web-based delivery are discussed. Innovative Web-based delivery devices increased course availability to pilots and dispatchers while increasing course flexibility and utility. These courses are customizable for both self-directed and instructor-led learning. Part of our goal was to create training materials with enough flexibility to enable Web-based delivery and downloadable portability while maintaining a rich visual multimedia-based learning experience. Studies suggest that using visually based multimedia techniques increases the effectiveness of icing training materials. This paper describes these concepts, gives examples, and discusses the transitional challenges.

Fletcher, William↗
DOE OSTI2024

Temperature-dependent mechanical properties and crystal plasticity parameters for additively manufactured Haynes-214 alloy: Experiments and numerical modeling

Our experimental mechanical testing data demonstrated that the additively manufactured (AM) laser powder bed fusion (L-PBF) Haynes-214 alloy exhibits non-linear mechanical properties as the temperature rises from ambient to 870 °C. Crystal plasticity (CP) simulations provide an effective approach to gaining deeper insights into microstructure-property linkages under thermomechanical loading. This method can reduce the need for costly high-temperature mechanical testing while accounting for the effects of crystallographic texture and grain morphology on the mechanical behavior of AM materials. However, calibrating a CP model is time-consuming because individual simulations are computationally expensive and hundreds (or more) of iterations over parameter sets may be required. To address this issue, we have designed a machine learning-differential evolution (ML-DE) CP framework that can accurately interpolate the tensile properties of AM L-PBF Haynes-214 alloy across a wide temperature range from ambient to 870 °C, with minimal reliance on experimental data. The framework uses electron backscatter diffraction (EBSD) measurements to generate statistically equivalent microstructural volume elements to serve as inputs to the CP modeling framework. Stress–strain curves were generated from 1000 CP simulations, which serve as the training data set for the three ML regression algorithms explored: linear, extra-trees, and multi-layer perceptron. These three regression models were independently evaluated to compare their efficiency and identify the most suitable algorithm for the given problem. Results revealed that the extra-trees ML regressor outperforms the other models in both qualitative and quantitative aspects with an R 2 of 0.98. Subsequently, the differential evolution optimization approach is employed to calibrate the ML-based CP material parameters with experimental results obtained at various temperatures. Finally, temperature-dependent CP material parameters are formulated. The effectiveness and efficiency of the designed framework are validated through comparison with experimental results, demonstrating a high degree of agreement. These calibrated parametric constitutive equations enable further use of the CP model to study the deformation behavior of this alloy under a wide range of thermo-mechanical loading conditions.

36 MATERIALS SCIENCE↗
NASA NTRS1995

Finite element based micro-mechanics modeling of textile composites

Textile composites have the advantage over laminated composites of a significantly greater damage tolerance and resistance to delamination. Currently, a disadvantage of textile composites is the inability to examine the details of the internal response of these materials under load. Traditional approaches to the study fo textile based composite materials neglect many of the geometric details that affect the performance of the material. The present three dimensional analysis, based on the representative volume element (RVE) of a plain weave, allows prediction of the internal details of displacement, strain, stress, and failure quantities. Through this analysis, the effect of geometric and material parameters on the aforementioned quantities are studied.

Glaessgen, E. H.↗
NASA NTRS1972

On the performance of infrared sensors in earth observations

The performance of infrared sensing systems is dependent upon the radiative properties of targets in addition to constraints imposed by system components. The unclassified state-of-the-art of infrared system performance figures is reviewed to indicate the relevance to system performance of target radiative properties. A theory of rough surface scattering is developed which allows the formulation of the reflective characteristics of extended targets. The thermal radiation emission from extended targets is formulated on the basis of internal radiation characteristics of natural materials and the transmissive scattering effects at the surface. Finally, the total radiative characteristics may be expressed as functions of material properties and incident and received directions, although the expressions are extremely complex functions and do not account for the effects of shadowing or multiple scattering. It is believed that the theory may be extended to include these effects and to incorporate the local radii of curvature of the surface.

Johnson, L. F.↗
NASA NTRSDate not supplied

Space Environmental Effects on Additively Manufactured (AM) Parts on MISSE-9/10

The Materials on International Space Station Experiment (MISSE) experiments have made a continuous presence on the ISS and allowed for testing of performance and durability of materials exposed to the Low Earth Orbit (LEO) space environment. Additive Manufacturing (AM) has been included on several MISSE flights, and many companies (Made in Space and Stratasys) and NASA centers wanted to test various AM material samples. The goal of studying Space Environmental Effects on AM Parts with MISSE 9/10 was to fly promising metal and polymer AM material samples (dogbones) that could have future manufacturing capabilities in space and conduct post-flight analysis of these materials via mechanical and optical properties. On these flights, MISSE-9 contained three Inconel and 12 polymer samples and MISSE-10 included three Inconel and 16 polymer samples. Before flying to the ISS, all the samples underwent thermal vacuum bakeout (at 60°C for 24 hours and 10-6 torr). After bakeout, control and flight experiments were weighed, and optical properties were taken. Optical properties such as solar absorptance and infrared emittance were taken on the control samples and the flight samples (preflight and postflight). To understand more about the mechanical properties of the AM samples, tensile testing was conducted on the samples to determine the yield and ultimate tensile strength of the dogbone samples against the control. Lastly, the torque on the fasteners securing the dogbone samples were loosened and measured using a torque wrench, and they were compared to their preflight torque specification required. Optical properties and masses were recorded before flight, and the postflight results were recorded and collected in June 2022 to study the effects. With the postflight analysis, NASA engineers can now better characterize how UV radiation and thermal cycling affect the material properties.

Materials on International Space Station Experimen↗
NASA NTRS1985

Investigation of the effects of NaOH dopant level on the physical and mechanical properties of carbon/phenolic composite material

The near-catastrophic erosion of the STS-8A solid rocket booster nozzle was the instigating factor in the recent, and on-going, intensive investigation of carbon/phenolic composite materials. Much of this effort has been focused on the effect of sodium contamination on the carbon fibers. It is known that sodium acts as a catalyst in the oxidation of the fibers at elevated temperatures. A study was undertaken to determine what changes were caused by variation in sodium content. Investigations were conducted in three areas: (1) phenolic resin; (2) carbon/phenolic prepreg; and (3) cured laminates. Due to the exploratory nature of the studies, a variety of tests in addition to those normally run in production facilities were considered. The experimental methodologies and results of these experiments are discussed, and recommendations for improving techniques and extending the research program are presented.

Clinton, R. G., Jr.↗
NASA NTRS1992

Reduced basis technique for evaluating the sensitivity coefficients of the nonlinear tire response

An efficient reduced-basis technique is proposed for calculating the sensitivity of nonlinear tire response to variations in the design variables. The tire is modeled using a 2-D, moderate rotation, laminated anisotropic shell theory, including the effects of variation in material and geometric parameters. The vector of structural response and its first-order and second-order sensitivity coefficients are each expressed as a linear combination of a small number of basis vectors. The effectiveness of the basis vectors used in approximating the sensitivity coefficients is demonstrated by a numerical example involving the Space Shuttle nose-gear tire, which is subjected to uniform inflation pressure.

Noor, Ahmed K.↗
NASA NTRS1969

Effects of high-pressure hydrogen on storage vessel materials

Tensile tests on welded plates of three grades of steel indicate an appreciable decrease of tensile strength and ductility of notched specimens and a decrease in ductility of unnotched samples. Surface cracking, evident in unnotched specimens, is conducive to breakdown in tensile strength and ductility.

Chandler, W. T.↗
NASA NTRS1975

The effect of C/O ratio on the condensation of planetary material

The condensation temperatures of refractory silicates and oxides in a gas of cosmic composition are strongly dependent on the C/O ratio. As the ratio increases from 0.4 to 0.9, condensation temperatures of compounds such as Al2O3, Ca2Al2SiO7, MgAl2O4, Mg2SiO4, and MgSiO3 decrease by 50-100 degrees. As C/O increases from 0.9 to 1.0, these temperatures drop an additional 300-400 degrees. Other chemical differences result when C/O approximately equals or exceeds 0.9. A new suite of high-temperature minerals appears (graphite, CaS, Fe3C, SiC and TiN); the reaction CO + 3H2 yields CH4 + H2O proceeds to the right at higher temperatures; and iron, whose condensation temperature is unaffected, condenses at higher temperatures than any silicate or oxide.

Larimer, J. W.↗
NASA NTRS1985

Oxidation resistant slurry coating for carbon-based materials

An oxidation resistant coating is produced on carbon-base materials, and the same processing step effects an infiltration of the substrate with silicon containing material. The process comprises making a slurry of nickel and silicon powders in a nitrocellulose lacquer, spraying onto the graphite or carbon-carbon substrate, and sintering in vacuum to form a fused coating that wets and covers the surface as well as penetrates into the pores of the substrate. Optimum wetting and infiltration occurs in the range of Ni-60 w/o Si to Ni-90 w/o Si with deposited thicknesses of 25-100 mg/sq. cm. Sintering temperatures of about 1200 C to about 1400 C are used, depending on the melting point of the specific coating composition. The sintered coating results in Ni-Si intermetallic phases and SiC, both of which are highly oxidation resistant.

Smialek, J. L.↗