Search NASA⌕ Search

SEARCH · Search NASA

Results for “Method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

New Cryogenic Method for Combining Lunar Regolith Simulant and Frozen Volatiles to Generate Icy Lunar Simulated Regolith

There is a requirement within the lunar science and exploration communities to develop lunar simulants containing volatiles that are solids at the cryogenic temperatures found in the permanently shadowed regions (PSRs), such as those found near the Lunar South Pole. Icy regolith simulants would be used for curation training, as well as for various research activities. One of the most critical aspects of developing a regolith simulant that is more physically and chemically like icy lunar regolith is minimizing any form of modification driven by elevated temperatures. Here we document our ongoing efforts to combine materials at ultralow temperatures, designed to minimize any chemical reactions or other physical changes during the production of the icy regolith. Our goal is to document how one can create an essentially “unreacted” icy regolith that can serve as an effective “time zero” start point from which advanced curation research will proceed. This is done using commercial off-the-shelf equipment as much as possible, along with creating a custom spray plate that can be adapted to a wide variety of methods, all for the planetary simulant community. This method creates crystals of various volatiles such as water, methanol, along with CO 2 ice and these components are combined with lunar regolith that is at -196°C temperature to avoid chemical reactions, and/or phase changes thus creating a more chemically relevant icy lunar regolith. The rules of chemistry stay the same regardless of location whether it’s in the lab, or directly on the lunar surface, and therefore we aim for creating a more authentic icy lunar simulant in the laboratory by operating at ultralow temperatures. It is also envisioned that this method will lead to advanced materials testing in the future. In addition, this method is directly applicable to prior missions such as LCROSS.

Cryogenic Lunar Simulant and Icy Volatile Producti↗

Towards Robust and Accurate Implicit Gradient Methods for Second- and Third-Order Nodal-Gradient Cell-Centered Finite-Volume Discretizations on Tetrahedral Grids

In this paper, we introduce implicit gradient methods as alternatives to conventional least-squares gradient methods for second- and third-order nodal-gradient cell-centered finite-volume discretizations, where solutions are stored at cells but gradients are stored at nodes. Because of the unique configuration of solutions and gradients, implicit gradient systems developed for the node-centered edge-based discretization method can be directly applied once the numerical solutions are interpolated from cells to nodes with sufficient accuracy. The resulting defect-correction solver can be loosely coupled with a flow-equation solver, and at convergence, solutions and gradients that satisfy the corresponding residual equations are obtained. Each iteration is relatively cheap compared with least-squares methods involving hundreds of neighbors. Numerical results are presented for accuracy verification studies and some simple but realistic flow problems.

Computational Fluid Dynamics↗

Ultrashort Pulsed Laser Treatment: A Novel Sterilization Method for Planetary Protection

Introduction: On missions seeking signs of potential life elsewhere in the solar system, we have an obligation not to bring our own Earthly life with us. Reducing the bioburden (number of living microbes) on spacecraft is therefore required by the COSPAR Policy on Planetary Protection to target bodies that are of interest for understanding the origins of life (such as Mars). The method of spacecraft sterilization predominantly used by NASA is Heat Microbial Reduction, which is typically incompatible with heat-sensitive components such as optics and electronics, and is expensive and time-consuming. Here, we present preliminary results on a novel method for spacecraft hardware sterilization: high-intensity ultrashort (femtosecond) pulsed laser illumination. Femtosecond lasers use extremely high photon fluxes (10^29 photons/sec*cm^2, ~0.03 J/cm^2) in extremely short pulses, which can inactivate even stress-tolerant microbial spores with minimal damage to the spacecraft surface. This rapid sterilization technique could be carried out in situ in a spacecraft assembly clean room using high-speed surface scanning, saving critical time and resources. It also can potentially remove or reduce debris from inactivated cells and spores. Methods: To develop optimal laser processing parameters for inactivating planetary protection-relevant organisms on metal surfaces, we inoculated 1-cm^2 mirror-polished aluminum coupons with Bacillus subtilis spores (2x10^5 spores/coupon) and tested the effect of several parameters, including pulse count and fluence. Sterilization effectiveness was measured by recovering spores using a PVA (polyvinyl acetate) peel and conducting serial dilution and plating for colony-forming units (CFUs). Results: Our results show that pulse count and fluence both affect sterilization effectiveness and that within a certain pulse count range, increasing fluence increases effectiveness. We have demonstrated the ability to reduce viable microbial counts by at least 10^-4. Future work will include testing higher abundances and different species of microorganisms, effectiveness on complex surfaces, compatibility with sensitive surfaces, and quantification of cell debris removal. Femtosecond pulsed laser illumination has the potential to provide dramatic savings in both cost and schedule over current methods of bioburden reduction to prevent forward contamination. It may also have the potential for use in surface sterilization of returned samples to prevent back contamination.

Planetary Protection; Lasers; Sterilization; Bacil↗

Deriving Essential Climate Variable Data from Multiple Satellite Remote Sensors Using a Consistent Fingerprinting Method

Hyperspectral observations from satellite-based sensors provide high information content for the Earth’s atmospheric and surface properties. Traditionally, long-term climate products are derived by performing spatial and temporal averaging of level-2 satellite products. It is a time-consuming process to generate level-2 data products since modern hyperspectral satellite sensors have millions of observations each day with thousands of spectral channels for each observation. Additionally, differences in level-2 retrieval algorithms can lead to errors in the climate products when fusing data from different satellite sensors. We have developed a radiometrically consistent spectral fingerprinting method, which overcomes the above-mentioned shortcomings, to derive climate change signals from multiple satellite sensors using spatiotemporally averaged level-1 data. We have applied this method to Atmospheric Infrared Sounder (AIRS) and Cross-track Infrared Sounder (CrIS) data and generated decade-long climate data records for atmospheric temperature, water vapor, cloud, trace gases, and surface skin temperature. A key component to this work is a set of observational-based radiative kernels produced from CrIS level-1 data using a single field of view (SFOV) optimal estimation retrieval algorithm. Only limited CrIS level-1 data (e.g., 1-2 years of data) are needed to the derive radiative kernels. Our Principal Component-based Radiative Model (PCRTM) enables us to perform SFOV retrievals under all sky conditions and provides radiative kernels (including those for clouds) needed by the spectral fingerprinting method. In this presentation, we will describe the basic methodology, the details of the algorithm, and results from NASA Aqua AIRS and Suomi-NPP CrIS data. The method can be applied to study future hyperspectral remote sensors such as CLARREO (Climate Absolute Radiance and Refractivity Observatory) Pathfinder (CPF), Tropospheric Emissions: Monitoring of Pollution (TEMPO), Surface Biology and Geology (SBG), Aerosol and Cloud, Convection and Precipitation (ACCP).

Xu Liu↗

Unsteady CFD Simulations of a Compression Corner Geometry Using Wall-Modeled LES Methods in Loci/CHEM

Several wall-modeled large eddy simulation (WMLES) methods are tested by simulating an unsteady Mach 2.0 compression corner geometry in Mississippi State’s Loci/CHEM solver. This study is conducted to evaluate the usage and requirements of these WMLES methods for applications regarding fluctuating pressure environments on launch vehicles with computational fluid dynamics (CFD). Two hybrid Reynolds-averaged Navier-Stokes (RANS)-large eddy simulation (LES) methods, Dynamic Hybrid RANS-LES (DHRL) and Improved Delayed Detached Eddy Simulation (IDDES), and one wall-stress-model, the Algebraic Wall Model for Wall-Modeled LES (AWMLES), are tested on varying grid and timestep refinement levels. These grid and timestep sizes are chosen to test the minimum requirements for successfully running these WMLES methods. The simulations are evaluated based on turbulent boundary layer properties in the developed boundary layer as well as unsteady quantities relating to fluctuating pressure environments in the region of the compression corner. The DHRL method shows good agreement with the comparison wind tunnel data and shows good grid and timestep convergence. The results from the IDDES and WMLES simulations show good agreement for several quantities with some discrepancies regarding others. The results presented in this paper will be used to inform further studies in predicting unsteady environments on higher-complexity geometries.

Bryson Frank↗

Explore Information Content Efficiently from Current and Future Hyperspectral Satellite Missions using a Spectral Fingerprinting Method

Hyperspectral remote sensors from current and future missions provide measurements of the Top of Atmosphere (TOA) radiance or reflectance spectra with high information content. For example, the Atmospheric Infrared Sounder (AIRS), together with the Cross-track Infrared Sounder (CrIS), and the Infrared Atmospheric Sounding Interferometer (IASI) have provided more than 20 years radiance measurements with thousands of spectral channels. These measurements will be continued for the next two decades with the same or more advanced hyperspectral sensors. The upcoming missions such as NASA’s CLARREO Pathfinder (CPF) and ESA’s TRUTHS will provide unprecedented accurate TOA hyperspectral radiance measurements in solar spectral region. Traditional ways to derive Climate Data Records (CDRs) from these measurements are performing spatial and temporal averages of the retrieved Level-2 products. However, it is a time-consuming process to generate decades of Level-2 data from Level-1 data. Furthermore, the differences in Level-2 algorithms used for different satellite sensors will introduce errors in derived CDRs. In this presentation, we will describe a spectral fingerprinting method to generate high-quality CDRs directly from spatiotemporally averaged Level-1 data. By using consistent radiative kernels which contain the spectral information of various atmospheric and surface CDRs, we can reduce the errors due to algorithm inconsistency. Additionally, the spectral fingerprinting method reduces the time needed to generate CDRs by more than three orders of magnitude. This makes it easy to reprocess CDRs once the Level-1 data from different satellites have been improved via either re-calibrations or inter-satellite calibrations. We will present results of applying spectral fingerprinting method to 20-years of AIRS and CrIS data. The resulting CDRs include: 1) vertical profiles of atmospheric temperature and water vapor, 2) cloud properties such as optical depth, effective size, and height, 3) vertical profiles or column amounts for atmospheric trace gases such as O3 and CO, and 4) surface emissivity spectra and skin temperatures. These CDRs will be publicly available at NASA GES DISC in late 2024. The same fingerprinting method is planned to be applied to future CPF and TRUTHS data for solar spectral region.

hyperspectral remote sensing↗

Methods for Validation of Random Uncertainty Estimates and Their Applications to Ozone Profiles From Limb-Viewing Satellite Instruments

For satellite measurements of atmospheric composition, the random uncertainty estimates provided by retrieval algorithms might be imperfect due to various approximations used in the retrievals or the presence of unknown error sources. This paper presents an overview of the methods used for the validation of random uncertainty estimates. All methods discussed in this study are categorized, and assumptions and limitations of each method are discussed. This overview evaluates these methods in application to ozone profile measurements from limb and occultation satellite instruments and provides practical illustrations of random uncertainty validation.

Viktoria F Sofieva↗

Effect of bolus fluid intake on energy expenditure values as determined by the doubly labeled water method

The doubly labeled water (DLW, 2H(2)18O) method is a highly accurate method for measuring energy expenditure (EE). A possible source of error is bolus fluid intake before body water sampling. If there is bolus fluid intake immediately before body water sampling, the saliva may reflect the ingested water disproportionately, because the ingested water may not have had time to mix fully with the body water pool. To ascertain the magnitude of this problem, EE was measured over a 5-day period by the DLW method. Six subjects were dosed with 2H2(18)O. After the reference salivas for the two-point determination were obtained, subjects drank water (700-1,000 ml), and serial saliva samples were collected for the next 3 h. Expressing the postbolus saliva enrichments as a percentage of the prebolus value, we found 1) a minimum in the saliva isotopic enrichments were reached at approximately 30 min with the minimum for 2H (95.48 +/- 0.43%) being significantly lower than the minimum for 18O (97.55 +/- 0.44, P less than 0.05) and 2) EE values calculated using the postbolus isotopic enrichments are appreciably higher (19.9 +/- 7.5%) than the prebolus reference values. In conclusion, it is not advisable to collect saliva samples for DLW measurements within approximately 1 h of bolus fluid intake.

NASA Discipline Musculoskeletal↗

Steady and Unsteady Nozzle Simulations Using the Conservation Element and Solution Element Method

This paper presents results from computational fluid dynamic (CFD) simulations of a three-stream plug nozzle. Time-accurate, Euler, quasi-1D and 2D-axisymmetric simulations were performed as part of an effort to provide a CFD-based approach to modeling nozzle dynamics. The CFD code used for the simulations is based on the space-time Conservation Element and Solution Element (CESE) method. Steady-state results were validated using the Wind-US code and a code utilizing the MacCormack method while the unsteady results were partially validated via an aeroacoustic benchmark problem. The CESE steady-state flow field solutions showed excellent agreement with solutions derived from the other methods and codes while preliminary unsteady results for the three-stream plug nozzle are also shown. Additionally, a study was performed to explore the sensitivity of gross thrust computations to the control surface definition. The results showed that most of the sensitivity while computing the gross thrust is attributed to the control surface stencil resolution and choice of stencil end points and not to the control surface definition itself.Finally, comparisons between the quasi-1D and 2D-axisymetric solutions were performed in order to gain insight on whether a quasi-1D solution can capture the steady and unsteady nozzle phenomena without the cost of a 2D-axisymmetric simulation. Initial results show that while the quasi-1D solutions are similar to the 2D-axisymmetric solutions, the inability of the quasi-1D simulations to predict two dimensional phenomena limits its accuracy.

Nozzle gross thrust calculations↗

Applicability and Limitations of Reliability Allocation Methods

Reliability allocation process may be described as the process of assigning reliability requirements to individual components within a system to attain the specified system reliability. For large systems, the allocation process is often performed at different stages of system design. The allocation process often begins at the conceptual stage. As the system design develops, more information about components and the operating environment becomes available, different allocation methods can be considered. Reliability allocation methods are usually divided into two categories: weighting factors and optimal reliability allocation. When properly applied, these methods can produce reasonable approximations. Reliability allocation techniques have limitations and implied assumptions that need to be understood by system engineers. Applying reliability allocation techniques without understanding their limitations and assumptions can produce unrealistic results. This report addresses weighting factors, optimal reliability allocation techniques, and identifies the applicability and limitations of each reliability allocation technique.

Reliability allocation↗

Molten Target Sputtering: Non-Conventional Method for High Mobility Si0.15Ge0.85 Growth at 500°C

Since electrons travel over 100 times faster in Silicon-Germanium (SiGe) than in pure Si due to the low effective masses associated with Ge and SiGe-based devices continue to replace Si-based solid-state electronic devices. SiGe thin film on sapphire was successfully grown at 890°C, using a magnetron sputtering system within heteroepitaxial framework. However, SiGe growth at 890oC is a costly and difficult process to produce as a uniform wafer for semiconductor device manufacturing due to thermal soak times, and geometric thermal shadowing from the wafer holder. To leverage the semiconducting capabilities of SiGe, novel processing techniques for SiGe film growth with decreased thermal loading are required. This paper introduces the Molten Target Sputtering (MTS) method that produces high mobility SiGe on sapphire below 500°C. This non-conventional method has the advantage of high kinetic energy, high-energy latency, and high flux density of sputtered atoms by combining benefits of both magnetron sputtering and thermal evaporation. For the MTS method, a 1~2 mm (depth and width) ring-shaped groove was cut between the center magnet and surrounded by electromagnets creating a circular cavity between the copper plate and source target materials that melt the target material. The SiGe grown from the MTS shows continuous morphology and 99.7% single crystal Si0.15Ge0.85 films. The Hall electron mobilities of the Si0.15Ge0.85 are 456 sq. cmV(exp -1)s(exp -1) and 123.9 sq. cmV(exp -1)s(exp -1) at 5.59 x 10(exp 18) cubic cm and 3.5 x 10(exp 20) cubic cm carrier concentration at 22.38°C, respectively. This is approximately 5.5 times higher than that of Si and similar to the Ge value at equivalent carrier concentrations and temperatures.

High mobility SiGe↗

Intercomparison of Evapotranspiration Measurement Methods for Vegetable Crops in California

Recent drought events in California and legislation passed with the goal of increasing the sustainability of groundwater supplies have led to increased interest in tools to optimize irrigation schedules and increase on-farm water used efficiency. With more than 400 different crops produced in California, evapotranspiration-based irrigation scheduling is a promising and well-established approach. However, there is a need for accurate methods to estimate crop evapotranspiration (ET(sub c)) across the diverse range of crops grown, coupled with cost-effective methods for quantifying the accuracy of these tools. In this study, we evaluated remotely sensed estimates of ET(sub c) and associated crop water requirements from NASA's Satellite Irrigation Support (SIMS) system for two vegetable crops and measured crop evapotranspiration ET(sub c) using multiple methods, including weighing lysimeters, eddy covariance towers (EC), and surface renewal stations. We compared ET(sub c) data from these measurements with remotely sensed basal crop evapotranspiration (ET(sub cb)) data from SIMS as well as ET(sub c) data from a standard FAO-56 crop coefficient approach. Studies were conducted for sugar beets in Five Points, CA from 2014 to 2015 and studies are ongoing for fresh market tomatoes in Firebaugh, CA. We present results from these intercomparison studies and describe implications for future studies to quantify the accuracy of remotely sensed measures of ET(sub c). Highlights from results to date include strong correlations between ET measured with both surface renewal instrumentation and eddy covariance calculations using a 3D sonic anemometer and ET(sub c) data measured with the weighing lysimeter, with respective R2 values of 0.7964 (surface renewal) and 0.8034 (eddy covariance). This study provides insights into agreement between different approaches for monitoring evapotranspiration and provides another reference point for the community working to develop accurate and cost-effective tools that support growers in optimizing irrigation management.

Measurement↗

A Modified Delphi Method to Accelerate Consensus Building in Expert Judgment Elicitation

The 2017 Earth Science Decadal Survey recommends the implementation of a novel Earth Observing mission to study Aerosols, Clouds, Convection, and Precipitation. The assessment of the candidate architectures under consideration requires the use of Expert Judgment Elicitation. Some of the assessment scores are obtained through consensus among the Science Leadership Team. A modified Delphi method was developed to accelerate the consensus building process and reduce the number of cycles required to converge. This paper discusses which elements of the traditional method were modified, how the method was applied, and the impact of the modifications on generating consensus.

Expert Judgement↗

An Overview of the Null-Field Method. II: Convergence and Numerical Stability

In this paper we provide an analysis of the convergence and numerical stability of the null-field method with discrete sources. We show that (i) if the null-field scheme is numerically stable then we can decide whether or not convergence can be achieved; (ii) if the null-field scheme is numerically unstable then we cannot draw any conclusion about the convergence issue; and (iii) the numerical stability is closely related to the property of a tangential system of radiating discrete sources to form a Riesz basis. Our numerical analysis indicates that for prolate spheroids and localized vector spherical wave functions, the null-field scheme is numerically unstable (this system of vector functions does not form a Riesz basis), while for distributed vector spherical wave functions, the numerical instability is not so pronounced (this system of discrete sources almost possesses the property of being a Riesz basis). We also describe an analytical method for computing the surface integrals in the framework of the conventional null-field method with localized vector spherical wave functions which increases the stability of the numerical scheme.

Null-field method↗

A Modified Delphi Method to Accelerate Consensus Building in Expert Judgment Elicitation

The 2017 Earth Science Decadal Survey recommends the implementation of a novel Earth Observing mission to study Aerosols, Clouds, Convection, and Precipitation. The assessment of the candidate architectures under consideration requires the use of Expert Judgment Elicitation. Some of the assessment scores are obtained through consensus among the Science Leadership Team. A modified Delphi method was developed to accelerate the consensus building process and reduce the number of cycles required to converge. This paper discusses which elements of the traditional method were modified, how the method was applied, and the impact of the modifications on generating consensus.

Expert Judgment↗

Overview of GSICS visible calibration methods.

Global Space-based Inter-Calibration System (GSICS) is an international collaborative effort initiated in 2005 by the World Meteorological Organization (WMO) and the Coordination Group for Meteorological Satellites (CGMS) to 1-monitor, 2-improve and 3-harmonize the quality of observations from operational weather and environmental satellites of the Global Observing System (GOS). GSICS aims at ensuring consistent accuracy among space-based observations worldwide for climate monitoring, weather forecasting, and environmental applications by 1-monitoring instrument performance, 2-operational inter-calibration of satellite instruments, 3-radiometrically scaling observations to absolute reference standards, 4-recalibration of archived datasets. Although many of the GSIC visible inter-calibration methods are based on medium pixel-level imagers such as MODIS, VIIRS, AVHRR, and geostationary sensors, the methods are applicable to high spatial resolution imagery such as Landsat. For sensor inter-calibration efforts, coincident ray-matched reflectance pairs are used to transfer the calibration from the reference to the target instrument. Spectral band adjustment factors (SBAF) are applied to account for any spectral band differences. For sensor stability monitoring, PICS, deep convective cloud (DCC) and polar ice Earth viewed targets are utilized. GSICS uses the moon for stability monitoring by using the GSICS Implementation of the USGS Robotic Lunar Observatory (ROLO) model (GIRO). GSICS is looking forward to the launch of CLARREO on the international space station (ISS) in 2023. The CLARREO hyperspectral reflective solar band (RSB) sensor will establish an absolute calibration reference in space, which will characterize invariant targets and will inter-calibrate concurrent sensors. Examples of these calibration methods will be presented at the workshop.

Visible calibration methods↗

A Hybrid Finite Element Method for Axisymmetric Waveguide fed Horns

A new method for finding radiation patterns and the reflection coefficients associated with an axisymmetric waveguide fed horn is presented. The approach is based on a hybrid finite element method (FEM) wherein the electromagnetic fields in the FEM region are coupled to the fields outside by two surface integral equations. Because of the local nature of the FEM, this formalism allows for the presence of inhomogeneities to be included in the problem domain. The matrix equation which results from the application of this method is shown to be complex-symmetric. It is, furthermore, diagonally dominant and sparse. Comparisons of calculated and measured data for two different horns show good agreement.

Hybrid↗

Experience Report: Using Formal Methods for Requirements Analysis of Critical Spacecraft Software

Formal specification and analysis of requirements continues to gain support as a method for producing more reliable software. However, the introduction of formal methods to a large software project is difficult, due in part to the unfamiliarity of the specification languages and the lack of graphics. This paper reports results of an investigation into the effectiveness of formal methods as an aid to the requirements analysis of critical, system-level fault-protection software on a spacecraft currently under development. Our experience indicates that formal specification and analysis can enhance the accuracy of the requirements and add assurance prior to design development in this domain.

Formal↗