Search NASA⌕ Search

SEARCH · Search NASA

Results for “Modeling Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Increased Asian Sulfate Aerosol Emissions Remarkably Enhance Sahel Summer Precipitation

Observational evidence shows that Sahel summer precipitation has experienced a considerable increase since the 1980s, coinciding with significant diverging trends of increased sulfate emissions in Asia and decreased emissions in Europe (dipole pattern of aerosols between Asia and Europe). The decrease in European sulfate aerosols has substantial effects on the Sahel summer precipitation increase, but the corresponding effect of increased Asian sulfate is unknown. Multi-model simulations in the Precipitation Driver and Response Model Intercomparison Project (PDRMIP) show, compared to decreased European aerosols, that increased Asian aerosols similarly enhance the Sahel summer precipitation but with different large-scale atmospheric circulation changes. Further analysis of the Sixth Coupled Model Intercomparison Project (CMIP6) simulations under historical attribution and various emission scenarios reinforces the results about the climate impacts of anthropogenic aerosols and suggests that in future scenarios with strong international cooperation and rapid climate mitigations (SSP2-45), the Sahel drought will be intensified likely due to the decline in Asian aerosol emissions. Our results suggest that Asian anthropogenic aerosols are likely a non-negligible driver of the recent recovery in Sahel precipitation amounts

54 ENVIRONMENTAL SCIENCES↗

Maturation of biomass‐to‐biofuels conversion technology pathways for rapid expansion of biofuels production: a system dynamics perspective

Abstract The Biomass Scenario Model ( BSM ) is a system‐dynamics simulation model intended to explore the potential for rapid expansion of the biofuels industry. The model is not predictive — it uses scenario assumptions based on various types of data to simulate industry development, emphasizing how incentives and technological learning‐by‐doing might accelerate industry growth. The BSM simulates major sectors of the biofuels industry, including feedstock production and logistics, conversion, distribution, and end uses, as well as interactions among sectors. The model represents conversion of biomass to biofuels as a set of technology pathways, each of which has allowable feedstocks, capital and operating costs, allowable products, and other defined characteristics. This study and the BSM address bioenergy modeling analytic needs that were identified in recent literature reviews. Simulations indicate that investments are most effective at expanding biofuels production through learning‐by‐doing when they are coordinated with respect to timing, pathway, and target sector within the biofuels industry. Effectiveness metrics include timing and magnitude of increased production, incentive cost and cost effectiveness, and avoidance of windfall profits. Investment costs and optimal investment targets have inherent risks and uncertainties, such as the relative value of investment in more‐mature versus less mature pathways. These can be explored through scenarios, but cannot be precisely predicted. Dynamic competition, including competition for cellulosic feedstocks and ethanol market shares, intensifies during times of rapid growth. Ethanol production increases rapidly, even up to Renewable Fuel Standards‐targeted volumes of biofuel, in simulations that allow higher blending proportions of ethanol in gasoline‐fueled vehicles. Published 2014. This article is a U.S. Government work and is in the public domain in the USA. Biofuels, Bioproducts, Biorefining published by John Wiley & Sons, Ltd on behalf of Society of Chemical Industry.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Environmental Influences on Deep Convective Upscale Growth Rate in Central Argentina From a Convection‐Permitting Simulation

This study uses a convection‐permitting model simulation to describe the environmental conditions under which convective upscale growth occurs in central Argentina, particularly examining environmental parameters when deep convection initially forms that could differentiate the rate of initial upscale growth. Simulated mesoscale convective systems (MCSs) are separated into slow and rapid growth by the rate of spatial growth from convection initiation until reaching the MCS scale. A low‐level jet (LLJ) is found more frequently near the deep convection that experiences rapid growth to an MCS, but its presence alone is not predictive of rapid growth. Using spatially‐averaged parameters, we find that rapid growth to MCSs also occurs in environments that are significantly more thermodynamically favorable with greater low‐level moisture and instability. Fewer significant differences are found in the kinematic environment with only the 0–2 km vertical wind shear magnitude being significantly larger for rapid growth MCSs compared to slow growth MCSs, potentially related to LLJs often peaking near this height. When focusing only on MCSs with the slowest and fastest growth rates, elevated‐layer shear is significantly smaller for very rapid growth MCSs, suggesting elevated‐layer shear may help discriminate between the upper and lower bounds of growth rate. Finally, when upscale growth occurs near the Sierras de Córdoba (SDC) with a LLJ present, rapid growth is also supported by favorable wind shear orientation. However, this does not hold for upscale growth occurring away from the SDC, highlighting the importance of interpreting shear direction relative to the orientation of features initiating deep convection.

Sasaki, Clayton R. S. [Univ. of Washington, Seattl↗

Fast All-sky Radiation Model for Solar applications (FARMS) [SWR-16-18]

The Fast All-sky Radiation Model for Solar applications (FARMS) is used to compute cloudy irradiance. Radiative transfer (RT) models simulating broadband solar radiation have been widely used by atmospheric scientists to model solar resources for various energy applications such as operational forecasting. Due to the complexity of solving the RT equation, the computation under cloudy conditions can be extremely time consuming though many approximations (e.g. two-stream approach and delta-M truncation scheme) have been utilized. Thus, a more efficient RT model is crucial for model developers as a new option for approximating solar radiation at the land surface with minimal loss of accuracy. We have developed a fast all-sky radiation model for solar applications (FARMS) using the simplified clear-sky RT model, REST2, and simulated cloud transmittances and reflectances from the Rapid Radiation Transfer Model (RRTM) with a sixteen-stream Discrete Ordinates Radiative Transfer (DISORT). Simulated lookup tables (LUTs) of cloud transmittances and reflectances were created by varying cloud optical thicknesses, cloud particle sizes, and solar zenith angles. Equations with optimized parameters were fitted to the cloud transmittances and reflectances to develop the model. Using this model the all-sky solar irradiance at the land surface can be computed rapidly by combining REST2 with the cloud transmittances and reflectances. This new RT model is more than 1000 times faster than those currently utilized in solar resource assessment and forecasting since it does not explicitly solve the RT equation for each individual cloud condition. Our results indicate the accuracy of the fast radiative transfer model is comparable to or better than two-stream approximation in term of computing cloud transmittance and solar radiation.

Xie, Yu↗

Fast All-sky Radiation Model for Solar applications (FARMS) 2023 [SWR-16-18]

The Fast All-sky Radiation Model for Solar applications (FARMS) is used to compute cloudy irradiance. Radiative transfer (RT) models simulating broadband solar radiation have been widely used by atmospheric scientists to model solar resources for various energy applications such as operational forecasting. Due to the complexity of solving the RT equation, the computation under cloudy conditions can be extremely time consuming though many approximations (e.g. two-stream approach and delta-M truncation scheme) have been utilized. Thus, a more efficient RT model is crucial for model developers as a new option for approximating solar radiation at the land surface with minimal loss of accuracy. We have developed a fast all-sky radiation model for solar applications (FARMS) using the simplified clear-sky RT model, REST2, and simulated cloud transmittances and reflectances from the Rapid Radiation Transfer Model (RRTM) with a sixteen-stream Discrete Ordinates Radiative Transfer (DISORT). Simulated lookup tables (LUTs) of cloud transmittances and reflectances were created by varying cloud optical thicknesses, cloud particle sizes, and solar zenith angles. Equations with optimized parameters were fitted to the cloud transmittances and reflectances to develop the model. Using this model the all-sky solar irradiance at the land surface can be computed rapidly by combining REST2 with the cloud transmittances and reflectances. This new RT model is more than 1000 times faster than those currently utilized in solar resource assessment and forecasting since it does not explicitly solve the RT equation for each individual cloud condition. Our results indicate the accuracy of the fast radiative transfer model is comparable to or better than two-stream approximation in term of computing cloud transmittance and solar radiation.

Xie, Yu↗

A Hybrid Reinforcement Learning and Cellular Automata Model for Crowd Simulation on the GPU

We present a GPU-based hybrid model for crowd simulations. The model uses reinforcement learning to guide groups of pedestrians towards a goal while adapting to environmental dynamics, and a cellular automaton to describe individual pedestrians’ interactions. In contrast to traditional multi-agent reinforcement learning methods, our model encodes the learned navigation policy into a navigation map, which is used by the cellular automaton’s update rule to calculate the next simulation step. As a result, reinforcement learning is independent of the number of agents, allowing the simulation of large crowds. Implementation of this model on the GPU allows interactive simulations of several hundreds of pedestrians.

Ruiz, Sergio↗

Global Distribution and Climate Forcing of Marine Organic Aerosol - Part 2: Effects on Cloud Properties and Radiative Forcing

A series of simulations with the Community Atmosphere Model version 5 (CAM5) with a 7-mode Modal Aerosol Model were conducted to assess the changes in cloud microphysical properties and radiative forcing resulting from marine organic aerosols. Model simulations show that the anthropogenic aerosol indirect forcing (AIF) predicted by CAM5 is decreased in absolute magnitude by up to 0.09 Wm{sup -2} (7 %) when marine organic aerosols are included. Changes in the AIF from marine organic aerosols are associated with small global increases in low-level incloud droplet number concentration and liquid water path of 1.3 cm{sup -3} (1.5 %) and 0.22 gm{sup -2} (0.5 %), respectively. Areas especially sensitive to changes in cloud properties due to marine organic aerosol include the Southern Ocean, North Pacific Ocean, and North Atlantic Ocean, all of which are characterized by high marine organic emission rates. As climate models are particularly sensitive to the background aerosol concentration, this small but non-negligible change in the AIF due to marine organic aerosols provides a notable link for ocean-ecosystem marine low-level cloud interactions and may be a candidate for consideration in future earth system models.

54 ENVIRONMENTAL SCIENCES↗

Description of the ARM Large-Scale Forcing Data from the Constrained Variational Analysis (VARANAL) Version 2

This technical report represents an update of the previous technical report written by Zhang et al., which described the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility constrained variational analysis (VARANAL) that is used to develop the large-scale forcing data for driving single-column models (SCMs), cloud-resolving models (CRMs), and large-eddy simulation models (LES). The VARANAL algorithm was originally developed by Zhang and Lin and Zhang et al. at Stony Brook University and was migrated to the Lawrence Livermore National Laboratory (LLNL) as the ARM operational objective analysis system in May 1999. Since then, the algorithm has been evolved with time along with the availability of new observations and techniques to meet various modeling needs. Major updates include: 1. The method used to develop multi-year continuous forcing data, 2. The incorporation of eddy correlation flux measurement system (ECOR) turbulent fluxes into the analysis, and 3. Improvements to the workflow (e.g., implementing part of the code into the ARM Data Integrator [ADI]) to increase efficiency. The ARM large-scale forcing data have been widely used for SCM/CRM/LES to understand and improve physical processes in models. Zhang et al. has provided a comprehensive review of the SCM concept, early efforts to derive forcing data for SCM studies, efforts of the ARM constrained variational analysis, and previous SCM studies using ARM cases. This technical report focuses on the constrained variational analysis algorithm and the introduction of the ARM VARANAL products. We also extended the VARANAL algorithm into a three-dimensional constrained variational analysis (3DCVA) and designed an ensemble framework to address the forcing uncertainty. The 3D large-scale forcing data are released as another datastream named “varanal3d”. Please refer to the ARM varanal3d technical report for more information.

54 ENVIRONMENTAL SCIENCES↗

Treatment of Solar Generation in Electric Utility Resource Planning (Presentation)

Today's utility planners have a different market and economic context than their predecessors, including planning for the growth of renewable energy. Through interviews and a questionnaire, the authors gathered information on utility supply planning and how solar is represented. Utilities were asked to provide their resource planning process details, key assumptions (e.g. whether DG is represented as supply or negative load), modeling methodology (e.g. type of risk analytics and candidate portfolio development), capacity expansion and production simulation model software, and solar project representation (project size, capacity value and integration cost adder). This presentation aims to begin the exchange of information between utilities, regulators and other stakeholders by capturing utility-provided information about: 1) how various utilities approach long-range resource planning; 2) methods and tools utilities use to conduct resource planning; and, 3) how solar technologies are considered in the resource planning process.

14 SOLAR ENERGY↗

On the freezing time of supercooled drops in developing convective clouds over tropical ocean

Ice generation and evolution in tropical maritime convective clouds are still poorly understood and challenging to model. Aircraft measurements during the Ice in Clouds-Tropical (ICE-T) project suggest that the observed ice particles in intense convective clouds are primarily small at relatively warm temperature (between -7 °C and -10 °C), and large frozen drops are detected at a temperature colder than -10 °C. However, the ice particle size distributions (PSDs) between -7 °C and -10 °C modelled using a parcel model with spectral bin microphysics scheme are much broader than the observation. To interpret the difference in the temperature-dependent ice PSD evolution between the model simulations and the observations, the freezing times and temperatures of supercooled drops are modelled and analyzed. The results indicate that the freezing time (from the initial nucleation to fully frozen) must be considered; it is not instantaneous, and is longer for large drops than for small drops. In strong updrafts, such as that sampled by the Learjet during ICE-T, large freezing drops may be carried upwards to a temperature lower than their nucleation temperature before they are fully frozen. This offers a feasible explanation for the temperature-dependent ice particle size evolution in strong updrafts observed during ICE-T. In models, drop freezing is normally assumed to be instantaneous, which is not realistic; the models yields broader ice PSDs between -7 °C and -10 °C than is observed. The results highlight the importance to consider the freezing time of supercooled drops in interpreting the observed and modelled ice PSDs in growing turrets and in modelling ice generation in cloud resolving models. To better understand the time-dependent drop freezing and its impact on the microphysics and dynamics of convective clouds, more field measurements and laboratory experiments, as well as modelling studies are needed.

54 ENVIRONMENTAL SCIENCES↗

Impact of Forest Canopy Structure on Buoyant Plume Dynamics During Wildland Fires

Heterogeneous forest canopies can generate complex turbulent structures, but in the presence of a fire plume, these interactions are not fully understood. This study investigates the influence of forest canopy heterogeneity on buoyant plume dynamics resulting from surface thermal anomalies representing wildland fires, utilizing Large Eddy Simulation (LES). The Parallelized Large-Eddy Simulation Model (PALM) was employed to simulate six canopy configurations: no canopy, homogeneous canopy, external plume-edge canopy, internal plume-edge canopy, 100 m gap canopy, and 200 m gap canopy. Each configuration was analyzed with and without a static surface heat flux patch of 5000 W ∙ m -2 , resulting in a resting buoyant plume. Simulations were conducted under three crosswind speeds: 0, 5, and 10 m ∙ s -1 . Results show that canopy structure significantly modifies plume behavior, mean flow, and turbulent kinetic energy (TKE) budgets. Plume updraft speed and tilt varied with canopy configuration and crosswind speed. Horizontal pressure gradients associated with plume-atmosphere interaction were modified based on the canopy configuration, resulting in varying crosswind speed reductions at the plume region. Strong momentum absorption was observed above the canopy for the crosswind cases, with the greatest enhancement in the gap canopies. Momentum injection from below the canopy due to the heat source was also observed, resulting in plume structure modulation based on canopy configuration. TKE was found to be the largest in the gap canopy configurations. TKE budget analysis revealed that buoyant production dominated over shear production. At the center of the heat patch, the gap canopy configurations showed enhanced buoyancy within the gap. These results improve our knowledge of fire-canopy-atmosphere interactions that can inform fire models on the impacts of canopy heterogeneity on plume dynamics and ember ejections.

54 ENVIRONMENTAL SCIENCES↗

Crack-Free 30% Chromium-Nickel Alloy Welding Products for Nuclear Service

We report prior research in the development of 30% chromium-nickel alloy nuclear welding wires has resulted in the resolution of primary water stress corrosion cracking (PWSCC) and ductility dip cracking (DDC) as well as improvement in solidification cracking (SC) resistance. The resolution of DDC exhibits some Laves phase, which has a negative effect on SC resistance. In this study, the use of an alternate carbide former, tantalum (Ta), in combination with niobium (Nb) was researched. Three heats of recently designed Filler Metal 52MSS-Ta (i.e., HV1648, HV1673A, and VX131WXW) were melted, fabricated, and systematically studied. DDC and SC were evaluated with thermodynamic modeling using the Scheil solidification simulation model, two types of varestraint tests, and strain-to-fracture (STF) testing. The varestraint and STF test results showed an improved SC resistance with reduced Laves phase and concurrent excellent DDC resistance. Optimized compositions with low Laves phase also exhibited high threshold strain values (TSVs) in the STF test. VX131WXW — which contains 2.81 wt-% Ta, 0.6 wt-% Nb, and 6 wt-% iron (Fe) - exhibited a TSV of 24%. Thermo-Calc computed the Laves phase to be 0.24% for VX131WXW compared to 0.06% in HV1673A. This difference in Laves phase resulted in the lower SC resistance of VX131WXW compared to HV1673A when measured with longitudinal varestraint testing. The maximum crack distance for HV1673A was about 0.6 mm while that of heat VX131WXW was about 1.0 mm. The typical diluted weld deposit made with VX131WXW was also resistant to PWSCC due to the chromium content exceeding 24%. These simultaneous results mark progress toward crack-free welds and provide direction for further optimization of Ta-containing filler metals.

30% chromium-nickel alloy↗

Modeling of Protection in Dynamic Simulation Using Generic Relay Models and Settings

This paper shows how generic protection relay models available in planning tools can be augmented with settings that are based on NERC standards or best engineering practice. Selected generic relay models in Siemens PSS®E have been used in dynamic simulations in the proposed approach. Undervoltage, overvoltage, underfrequency, and overfrequency relays have been modeled for each generating unit. Distance-relay protection was modeled for transmission system protection. Two types of load-shedding schemes were modeled: underfrequency (frequency-responsive non-firm load shedding) and underfrequency and undervoltage firm load shedding. Several case studies are given to show the impact of protection devices on dynamic simulations. This is useful for simulating cascading outages.

cascading failures↗

Multi‐model analysis of climate impacts on plant photosynthesis in China during 2000–2015

Abstract Differences, arising from differences in gross primary production (GPP) model structures and driving forces, have fuelled arguments concerning interannual changes of GPP in China since 2000. To better investigate the interannual variability of GPP and its covariance with climate factors in China, this study adopted a multi‐model analysis based on three GPP models (i.e., Terrestrial Ecosystem Carbon flux model [TEC], Breathing Earth System Simulator model [BESS], and MOD17 GPP model). The results show that annual GPP in China increased by 0.021–0.057 Pg C year −1 from 2000 to 2015 attributable to atmospheric‐CO 2 fertilization effects and favourable climate change, that is, increasing precipitation ( P r ) and temperature ( T a ). However, northern China and southern China had a large difference in the amplitude of these GPP changes; annual GPP increased by 0.017–0.039 Pg C year −1 in northern China but only 0.001–0.018 Pg C year −1 in southern China. Northern China and southern China occupy contrasting climate zones and this contrast produced different interannual variability of GPP through different mechanisms. Northern China has a dry climate with GPP changes sensitive to P r . As a result, more P r along with higher T a in northern China produced the strong uptrend of GPP from 2000 to 2015. In contrast, southern China has a wet climate with its GPP sensitive to solar radiation and T a . For the interval of 2000–2015, decreasing radiation plus drought exerted a negative influence on GPP in southern China. This study highlights the diverse mechanisms in which climate change affects GPP in dry and wet climate zones. A robust multi‐model analysis is preferred to reduce uncertainties arising from a single GPP model and its driving data.

Yan, Hao↗

Theoretical and experimental analysis of bidirectionally pumped 1.3 μm Pr{sup 3+}-doped ASE source

We have analyzed the characteristics of 1.3 μm praseodymium (Pr{sup 3+}) doped bidirectionally pumped double pass (BIP-DP) configuration amplified spontaneous emission (ASE) source theoretically and experimentally. The source’s simulation model was established and corresponding simulated results were given. The effects of pump ratio, Pr{sup 3+}-doped fiber (PDF) length, total pump power and source’s optical losses were researched. The output power of BIP-DP ASE source is mainly affected by the total pump power, PDF length and source’s optical losses, while it has little relationship with the pump ratio. The BIP-DP ASE source operating at the symmetric bi-directional pump condition was constructed experimentally. The acquired output power of more than 5 mW has been obtained experimentally, which was with the quasi-gaussian output spectrum, and its 3 dB bandwidth is ~ 20 nm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Linear eddy mixing based tabulation and artificial neural networks for large eddy simulations of turbulent flames

A large eddy simulation (LES) sub-grid model is developed based on the artificial neural network (ANN) approach to calculate the species instantaneous reaction rates for multi-step, multi-species chemical kinetics mechanisms. The proposed methodology depends on training the ANNs off-line on a thermo-chemical database representative of the actual composition and turbulence (but not the actual geometrical problem) of interest, and later using them to replace the stiff ODE solver (direct integration (DI)) to calculate the reaction rates in the sub-grid. The thermo-chemical database is tabulated with respect to the thermodynamic state vector without any reduction in the number of state variables. The thermo-chemistry is evolved by stand-alone linear eddy mixing (LEM) model simulations under both premixed and non-premixed conditions, where the unsteady interaction of turbulence with chemical kinetics is included as a part of the training database. The proposed methodology is tested in LES and in stand-alone LEM studies of three distinct test cases with different reduced mechanisms and conditions. LES of premixed flame-turbulence-vortex interaction provides direct comparison of the proposed ANN method against DI and ANNs trained on thermo-chemical database created using another type of tabulation method. It is shown that the ANN trained on the LEM database can capture the correct flame physics with accuracy comparable to DI, which cannot be achieved by ANN trained on a laminar premix flame database. A priori evaluation of the ANN generality within and outside its training domain is carried out using stand-alone LEM simulations as well. Results in general are satisfactory, and it is shown that the ANN provides considerable amount of memory saving and speed-up with reasonable and reliable accuracy. The speed-up is strongly affected by the stiffness of the reduced mechanism used for the computations, whereas the memory saving is considerable regardless. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cooperative lane control application for fully connected and automated vehicles at multilane freeways

Advances in communications technology have made the development of connected and automated vehicle (CAV) applications that may potentially replace traditional, gantry operated lane control signals (LCSs) possible. Here, we develop the concept of a prototype CAV-enabled LCS application and provides a preliminary assessment of the potential improvement it offers over traditional LCS. Real-world data obtained from an LCS on I-66 in Northern Virginia was used to calibrate and validate a baseline simulation model. Further, the current lane control scenarios utilized in the Northern Virginia LCS were identified and relevant data resulting from implementation of those scenarios were collected to model the LCS in a simulation environment. The performance of real-world LCS was then compared to a prototype CAV-enabled LCS application developed in this research. The CAV-enabled LCS application consistently outperformed the traditional LCS with increased throughput and speeds. On average, an increase of 18.4%, 9.6% and 12.8% in throughput was observed for three selected scenarios under the best case of a 1 sec headway. Furthermore, the CAV-enabled LCS application was also found to reduce volatility, represented by variation in acceleration and deceleration regimes, by an average of 25.6% and 49.6%. The reduction in turbulence in the traffic stream may indicate potential improved safety with the CAV system.

33 ADVANCED PROPULSION SYSTEMS↗