Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHASE STABILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Ion implantation of erbium into polycrystalline cadmium telluride

The specific features of the ion implantation of polycrystalline cadmium telluride with grains 20–1000 μm in dimensions are studied. The choice of erbium is motivated by the possibility of using rare-earth elements as luminescent “probes” in studies of the defect and impurity composition of materials and modification of the composition by various technological treatments. From the microphotoluminescence data, it is found that, with decreasing crystal-grain dimensions, the degree of radiation stability of the material is increased. Microphotoluminescence topography of the samples shows the efficiency of the rare-earth probe in detecting regions with higher impurity and defect concentrations, including regions of intergrain boundaries.

36 MATERIALS SCIENCE↗

Robustness of the Edge States in Graphene Quantum Hall System: Does the Chiral Symmetry Degraded by t' Matter?

While usual edge states in the quantum Hall effect reside between adjacent Landau levels, QHE in graphene has a peculiar edge mode at E = 0 that resides right within the n = 0 Landau level as protected by the chiral symmetry. In real graphene, small but finite second-neighbor hopping exists, which degrades the chiral symmetry in the bipartite lattice. Here we have found that the edge mode is again embedded in the n = 0 bulk Landau level despite the broken chiral symmetry due to the second-neighbor hopping, where the charge is accumulated along the zigzag edge. Hence the behavior of the zero mode has turned out to be distinguished from the case of zero magnetic field, which is related to the stability of topological compensation. This charge density accumulated along the zigzag edge can be measured with an STM imaging in magnetic fields.

36 MATERIALS SCIENCE↗

Effect of alkali addition on DC conductivity and thermal properties of vanadium-bismo-borate glasses

The DC Conductivity and Differential Thermal Analysis of glasses with composition (30−x)Li{sub 2}O⋅xV{sub 2}O{sub 5}⋅20Bi{sub 2}O{sub 3}⋅50B{sub 2}O{sub 3}(x=15, 10, 5) has been carried out in order to study the effect of replacing the Transition Metal Oxide (TMO) with alkali oxide. A significant increase in the DC conductivity has been observed with increase in alkali content. Again the thermal measurements have shown the decrease in both glass transition temperature (T{sub g}) and crystallization temperature (T{sub x}). The Glass Stability (GS) and Glass Forming Ability (GFA) have also been calculated and these also were found to decrease with increase in alkali oxide content at the cost of TMO.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Attosecond transient absorption instrumentation for thin film materials: Phase transitions, heat dissipation, signal stabilization, timing correction, and rapid sample rotation

We present an extreme ultraviolet (XUV) transient absorption apparatus tailored to attosecond and femtosecond measurements on bulk solid-state thin-film samples, specifically when the sample dynamics are sensitive to heating effects. The setup combines methodology for stabilizing sub-femtosecond time-resolution measurements over 48 h and techniques for mitigating heat buildup in temperature-dependent samples. Single-point beam stabilization in pump and probe arms and periodic time-zero reference measurements are described for accurate timing and stabilization. A hollow-shaft motor configuration for rapid sample rotation, raster scanning capability, and additional diagnostics are described for heat mitigation. Heat transfer simulations performed using a finite element analysis allow comparison of sample rotation and traditional raster scanning techniques for 100 Hz pulsed laser measurements on vanadium dioxide, a material that undergoes an insulator-to-metal transition at a modest temperature of 340 K. Experimental results are presented confirming that the vanadium dioxide (VO 2 ) sample cannot cool below its phase transition temperature between laser pulses without rapid rotation, in agreement with the simulations. The findings indicate the stringent conditions required to perform rigorous broadband XUV time-resolved absorption measurements on bulk solid-state samples, particularly those with temperature sensitivity, and elucidate a clear methodology to perform them.

47 OTHER INSTRUMENTATION↗

Characterization and dispersibility of improved thermally stable amide functionalized graphene oxide

Graphical abstract: Improved thermal stability and surface study of amide functionalized graphene oxide. - Highlights: • Amide functionalized graphene oxides (AGOs) were synthesized from aniline, 2-aminothiazole and 2-aminopyrimidine. • Achieved enhancement in thermal stability of AGOs as compare to GO. • AGOs are found to be highly dispersible in water, DMSO and DMF. • Dispersibility is stable for more than two and half months. - Abstract: Amidation of graphene oxide (GO) with aniline, 2-aminothiazole and 2-aminopyrimidine results in the synthesis of amide functionalized graphene oxides (AGOs). Scanning electron microscopy, X-ray diffraction, thermogravimetric analysis (TGA), UV–vis and Raman spectroscopy were used to investigate the properties of AGOs. It was found that, contrary to GO, AGOs are soluble in water, dimethyl sulfoxide, dimethylformamide and can be stabilized for months. TGA of AGOs shows the major weight loss above 670 °C as compared to GO in which significant weight loss occurs near 200 °C. Thus AGOs show strong improvement in thermal properties.

36 MATERIALS SCIENCE↗

Sulfur immobilization and lithium storage on defective graphene: A first-principles study

Motivated by the recent progresses and remaining technical challenges in Li-S battery, we employ defective graphene as a prototype cathode framework to illustrate how battery performance is influenced by the mesoporous carbon materials. We show that the immobilization of S unavoidably sacrifices its ability to further interact with Li, which leads to an enhanced cycle life but a decreased capacity. Based on our calculated results, we suggest a suitable S binding-energy range of ∼4–5 eV to balance the battery stability and capability under thermodynamic equilibrium conditions. Our results may promote the understanding and architecture design of Li-S battery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancement of thermal stability and water resistance in yttrium-doped GeO{sub 2}/Ge gate stack

We have systematically investigated the material and electrical properties of yttrium-doped GeO{sub 2} (Y-GeO{sub 2}) on Germanium (Ge). A significant improvement of both thermal stability and water resistance were demonstrated by Y-GeO{sub 2}/Ge stack, compared to that of pure GeO{sub 2}/Ge stack. The excellent electrical properties of Y-GeO{sub 2}/Ge stacks with low D{sub it} were presented as well as enhancement of dielectric constant in Y-GeO{sub 2} layer, which is beneficial for further equivalent oxide thickness scaling of Ge gate stack. The improvement of thermal stability and water resistance are discussed both in terms of the Gibbs free energy lowering and network modification of Y-GeO{sub 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal and mechanical properties of TPU/PBT reinforced by carbon fiber

In this study, thermal, mechanical properties and processability were performed on a series of carbon fiber (CF) filled thermoplastic polyurethane (TPU)/poly (butylene terephthalate) (PBT) composites to identify the effect of CF weight fraction on the properties of TPU/PBT. Scanning Electronic Microscope (SEM) show that CFs are uniformly dispersed in TPU/PBT matrix and there are no agglomerations. Melt flow index (MFI) show that the melt viscosity increased with the CF loading. Thermogravimetric analysis (TGA) revealed that the introduction of CF into organic materials tend to improve their thermal stability. The mechanical properties indicated that tensile strength and modulus, flexural strength and modulus, improved with an increase in CF loading, but the impact strength decreased by the loading of CF.

36 MATERIALS SCIENCE↗

Ab initio calculation of structural stability, electronic and optical properties of Ag{sub 2}Se

The structural stability, electronic and optical properties of Ag{sub 2}Se compound is studied using ab initio packages. Ag{sub 2}Se is found to crystallize in orthorhombic structure with two different space groups i.e. P2{sub 1}2{sub 1}2{sub 1} (No. 19) and P222{sub 1} (No. 17). For this compound in these two space groups, the total energy has been computed as a function of volume. Our calculated results suggest that the P2{sub 1}2{sub 1}2{sub 1}–phase is more stable than that of the P222{sub 1}–phase. The band structure calculation show that Ag{sub 2}Se is semimetallic with an overlap of about 0.014 eV in P2{sub 1}2{sub 1}2{sub 1}–phase whereas is metallic in nature in P222{sub 1}–phase. Moreover, the optical properties including the dielectric function, energy loss spectrum are obtained and analysed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Catalytic properties of mesoporous Al–La–Mn oxides prepared via spray pyrolysis

Highlights: • Al–La–Mn oxides were prepared using spray pyrolysis. • Al–La–Mn oxides exhibit large and uniform pore sizes. • Mesoporous Al–La–Mn oxides were compared with those prepared by conventional precipitation. • Mesoporous Al–La–Mn oxides show superior activity in decomposition of hydrogen peroxide. - Abstract: Mesoporous Al–La–Mn oxides are prepared via spray pyrolysis and are applied to the catalytic decomposition of hydrogen peroxide. The characteristics of the mesoporous Al–La–Mn oxides are examined using N{sub 2} adsorption, X-ray diffraction, and X-ray fluorescence measurements. The surface area and pore size of the Al–La–Mn oxides prepared via spray pyrolysis are larger than those of the Al–La–Mn oxides prepared using a precipitation method. The catalytic performance of the materials during the decomposition of hydrogen peroxide is examined in a pulse-injection reactor. It is confirmed that the mesoporous Al–La–Mn oxides prepared via spray pyrolysis exhibit higher catalytic activity and stability in the decomposition of hydrogen peroxide than Al–La–Mn oxides prepared using a conventional precipitation method.

36 MATERIALS SCIENCE↗

On the location and stability of charge in SiO{sub 2}/SiN{sub x} dielectric double layers used for silicon surface passivation

Dielectric double layers of thermal silicon dioxide–chemical vapour deposition (CVD) silicon nitride are found to produce excellent passivation of silicon surfaces by combining a chemical reduction of surface defect states, with a field effect reduction of carriers at the surface due to charge in the dielectrics. The charge present in such double-layers has previously been attributed to be characteristic of the interface between the two. However, experimental evidence shows this is indirect and inconclusive. This manuscript reports direct measurements that show the charge lies within 10 nm of the interface between passivating double layers of thermal silicon dioxide–plasma CVD silicon nitride. In addition, the passivation efficiency of oxide-nitride layers, deposited using optimised conditions, was found to be largely unaffected by extra charge subsequently added to the film. The passivation efficiency of textured surfaces or those produced using non-optimised deposition conditions is found to be highly dependent on the field effect component provided by extra deposited charge. Using such extra field effect component, surface recombination velocities <2 cm/s have been obtained on single oxide and oxide/nitride double layers. The extra deposited charge was found to have good long term stability when the dielectric films are submitted to a chemical treatment. By contrast, poor stability of the deposited charge was observed when subjected to ultraviolet radiation. These results point to the importance of the interface between dielectrics when considering how to optimise the charge present in passivating dielectric films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure and properties of nanostructured ZnO arrays and ZnO/Ag nanocomposites fabricated by pulsed electrodeposition

We investigate the structure, surface morphology, and optical properties of nanostructured ZnO arrays fabricated by pulsed electrodeposition, Ag nanoparticles precipitated from colloidal solutions, and a ZnO/Ag nanocomposite based on them. The electronic and electrical parameters of the ZnO arrays and ZnO/Ag nanocomposites are analyzed by studying the I–V and C–V characteristics. Optimal modes for fabricating the ZnO/Ag heterostructures with the high stability and sensitivity to ultraviolet radiation as promising materials for use in photodetectors, gas sensors, and photocatalysts are determined.

36 MATERIALS SCIENCE↗

High temperature thermal and mechanical stability of high-strength nanotwinned Al alloys

Al alloys have widespread applications, but often suffer from low yield strength. Recently, nanotwinned Al-Fe solid solution alloys have shown high flow stress (>1.5 GPa), ascribed to nanograins with abundant incoherent twin boundaries and solute-stabilized 9R phase. However, the high temperature mechanical behaviors of high-strength twinned Al-Fe alloys remain unknown. In this study, we show that nanotwinned microstructures are stable up to 280 °C, followed by recrystallization at 300 °C. In-situ uniaxial compression tests in a scanning electron microscope show that the nanotwinned Al alloys retain their high flow stress of ~1.3 GPa when tested up to 200 °C, and substantial softening occurs at a test temperature of 300 °C. This work reveals the superb thermal stability and high temperature mechanical behaviors of the nanotwinned Al-Fe alloys, and offers a new perspective to design future strong and thermally stable nanostructured Al alloys.

36 MATERIALS SCIENCE↗

Photoluminescence and thermal stability of yellow-emitting Na{sub 2}Ba{sub 2}Si{sub 2}O{sub 7}:Sm{sup 3+} phosphor for light-emitting diodes

Highlights: • Na{sub 2}Ba{sub 2}Si{sub 2}O{sub 7}:Sm{sup 3+} phosphors are obtained via a solid-state reaction method. • Excitation at 402 nm, the yellow color purity is close to 100%. • The mechanism of concentration quenching is dipole–dipole interaction. • The temperature-dependent luminescence property exceed that of YAG:Ce{sup 3+}. - Abstract: A series of yellow-emitting Na{sub 2}(Ba{sub 2−x}Sm{sub x})Si{sub 2}O{sub 7} phosphors have been prepared via solid-state reaction technique. X-ray diffraction (XRD), photoluminescence (PL) spectra, temperature-dependent luminescence property, concentration quenching mechanism and luminescence lifetime are applied to characterize the obtained samples. Under 402 nm near ultraviolent excitation, the samples emit yellow light and the color purity is close to 100%. The critical quenching concentration of Sm{sup 3+} in the Na{sub 2}Ba{sub 2}Si{sub 2}O{sub 7} host is about 3.6 mol% and corresponding quenching behavior is ascribed to be electric dipole–dipole interaction. Furthermore, the phosphor has good thermal stability property, superior to the commercial yellow Y{sub 3}Al{sub 5}O{sub 12}:Ce{sup 3+} phosphor and the activation energy for thermal quenching is calculated as 0.18 eV.

36 MATERIALS SCIENCE↗

Electrospun montmorillonite modified poly(vinylidene fluoride) nanocomposite separators for lithium-ion batteries

Highlights: • Composite separators of PVDF and MMT for lithium-ion batteries were electrospun. • Thermal dimensional stability and tensile property of composite separators get improved. • Presence of montmorillonite promotes electrical properties of PVDF fibrous separators. • Batteries consisting of PVDF/MMT-5% separator achieve the best performance. - Abstract: Composite separators of poly(vinylidene fluoride) (PVDF) with different contents of montmorillonite (MMT) for Li-ion batteries have been fabricated by electrospinning. The morphology, function group, crystallinity, and mechanical properties of membranes were investigated by scanning electron microscope (SEM), Fourier Transform infrared spectra (FT-IR), differential scanning calorimetry (DSC), and tensile test, respectively. Interlayer spacing of MMT in polymer was characterized by X-ray diffraction (XRD). In addition, the results of electrochemical measurements suggest that PVDF/MMT-5% composite membrane has maximum ionic conductivity of 4.2 mS cm{sup −1}, minimum interfacial resistance of 97 Ω, and excellent electrochemical stability. The cell comprising PVDF/MMT-5% composite membrane shows higher capacity and more stable cycle performance than the one using commercial Celgard PP membrane.

36 MATERIALS SCIENCE↗

Stability improvement of organic light emitting diodes by the insertion of hole injection materials on the indium tin oxide substrate

The degradation of organic light-emitting diodes (OLEDs) is a very complex issue, which might include interfacial charge accumulation, material diffusion, and electrical-induced chemical reaction during the operation. In this study, the origins of improvement in device stability from inserting a hole injection layer (HIL) at the indium tin oxide (ITO) anode are investigated. The results from aging single-layer devices show that leakage current increases in the case of ITO/hole transport layer contact, but this phenomenon can be prevented by inserting molybdenum oxide (MoO{sub 3}) or 1,4,5,8,9,11-hexaazatriphenylene hexacarbonitrile (HAT-CN{sub 6}) as an HIL. Moreover, X-ray photoemission spectroscopy suggests that the diffusion of indium atoms and active oxygen species can be impeded by introducing MoO{sub 3} or HAT-CN{sub 6} as an HIL. These results reveal that the degradation of OLEDs is related to indium and oxygen out-diffusion from the ITO substrates, and that the stability of OLEDs can be improved by impeding this diffusion with HILs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Engineering of high performance supercapacitor electrode based on Fe-Ni/Fe{sub 2}O{sub 3}-NiO core/shell hybrid nanostructures

The present work reports on fabrication and supercapacitor applications of a core/shell Fe-Ni/Fe{sub 2}O{sub 3}-NiO hybrid nanostructures (HNs) electrode. The core/shell Fe-Ni/Fe{sub 2}O{sub 3}-NiO hybrid nanostructures have been fabricated through a two step method (nanowire fabrication and their controlled oxidation). The 1D hybrid nanostructure consists of highly porous shell layer (redox active materials NiO and Fe{sub 2}O{sub 3}) and the conductive core (FeNi nanowire). Thus, the highly porous shell layer allows facile electrolyte diffusion as well as faster redox reaction kinetics; whereas the conductive FeNi nanowire core provides the proficient express way for electrons to travel to the current collector, which helps in the superior electrochemical performance. The core/shell Fe-Ni/Fe{sub 2}O{sub 3}-NiO hybrid nanostructures electrode based supercapacitor shows very good electrochemical performances in terms of high specific capacitance nearly 1415 F g{sup −1} at a current density of 2.5 A g{sup −1}, excellent cycling stability and rate capability. The high quality electrochemical performance of core/shell hybrid nanostructures electrode shows its potential as an alternative electrode for forthcoming supercapacitor devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗