Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase 2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Ab initio study of structural stability and electronic properties of Ti{sub 1-x}Mg{sub x}Cr{sub 2} and TiMg{sub x}Cr{sub 2-x} laves phase

The structural stability and electronic properties of TiMgCr{sub 2} laves phase have been calculated and compared. It is found that Mg prefer to substitutes titanium than chromium. The values of entalpies of formation show that Ti{sub 1-x}Mg{sub x}Cr{sub 2} may exist for only one concentration x=0.125 and the more favorable alloy is Ti{sub 0.875}Mg{sub 0.125}Cr{sub 2}. For TiCr{sub 2}, the optimized structural parameters were in good agreement with experimental values, while for TiMgCr{sub 2}, there is not experimental data. The electronic densities of states (DOS) are given and the nature of bonds are also discussed.

36 MATERIALS SCIENCE↗

Phase transformations in Ln 2 O 3 materials irradiated with swift heavy ions

Phase transformations induced in the cubic C-type lanthanide sesquioxides, Ln 2 O 3 (Ln = Sm, Gd, Ho, Tm, and Lu), by dense electronic excitation are investigated. The structural modifications resulting from exposure to beams of 185 MeV Xe and 2246 MeV Au ions are characterized using synchrotron x-ray diffraction and Raman spectroscopy. The formation of a B-type polymorph, an X-type nonequilibrium phase, and an amorphous phase are observed. The specific phase formed and the transformation rate show dependence on the material composition, as well as the ion beam mass and energy. Atomistic mechanisms for these transformations are determined, indicating that formation of the B-type phase results from the production of anti-Frenkel defects and the aggregation of anion vacancies into planar clusters, whereas formation of the X-type and amorphous phases requires extensive displacement of both anions and cations. Here, the observed variations in phase behavior with changing lanthanide ionic radius and deposited electronic energy density are related to the energetics of these transformation mechanisms.

36 MATERIALS SCIENCE↗

Formation and stability of reduced Ti O x layers on anatase Ti O 2 ( 101 ) : Identification of a novel T i 2 O 3 phase

Here we use density functional theory (DFT) calculations to investigate structural models consisting of anatase TiO 2 (101) slabs covered by reduced overlayers formed by (101) crystallographic shear planes (CSPs). Ab initio thermodynamics supports the stability of these structures under a wide range of experimental conditions. The overlayers are found to have Ti 2 O 3 stoichiometry with a crystal structure different from the known corundumlike Ti 2 O 3 (here denoted a α-Ti 2 O 3 ) phase. DFT calculations predict this new “csp-Ti 2 O 3 ” phase to be energetically close to α-Ti 2 O 3 and to have also a similar band gap. These results suggest a possible role of the csp-Ti 2 O 3 phase in the properties of black TiO 2 , a promising photocatalytic material made of nanoparticles with a crystalline TiO 2 core and a highly reduced TiO x shell that is capable of absorbing the whole spectrum of visible light.

36 MATERIALS SCIENCE↗

Solid CO 2 -philes as potential phase-change physical solvents for CO 2

The binary phase behavior of mixtures of CO 2 and highly CO 2 -philic solids has been determined at 298 K. The solids include sugar acetates (β-d-galactose pentaacetate, β-d-ribofuranose tetraacetate, α-d(+)-glucose pentaacetate, d-(+)-sucrose octaacetate), tert-butylated aromatics (2,4-di-tert-butylphenol, 2,6-di-tert-butyl-4-methylphenol, 3,5-di-tert-butylphenol, 1,2,4-triacetoxybenzene), and a highly oxygenated cyclic compound (1,3,5-trioxane). The results are presented in the form of phase behavior (Px) diagrams at 298 K that exhibit either one (vapor–liquid–solid, VLS) or two (vapor–liquid–liquid, VL 1 L 2 and vapor–liquid–solid, VL 2 S) three-phase equilibrium lines. Ternary phase behavior at 298 K has also been determined and presented in the form of a pseudo-binary Px diagram for mixtures of an equimolar gas blend of CO 2 and H 2 and each of these CO 2 -philic solids and several other previously identified highly CO 2 -philic compounds. Only four compounds, sucrose octaacetate, 1,3,5-tri-tert-butylbenzene, 2,4-di-tert-butylbenzene, and 1,3,5-trioxane, melted at 298 K in the presence of the CO 2 /H 2 mixture at three-phase vapor–liquid–solid pressures ranging between 6 MPa and 10 MPa. These four compounds are candidates for the selective absorption of CO 2 from a CO 2 /H 2 mixture using solid compounds that can melt and selectively absorb CO{sub 2}.

36 MATERIALS SCIENCE↗

Synthesis, crystal structure and electronic structure of the binary phase Rh{sub 2}Cd{sub 5}

A new phase in the Rh-Cd binary system - Rh{sub 2}Cd{sub 5} has been identified and characterized by single crystal X-ray diffraction and Energy dispersive X-ray analysis. The stoichiometric compound Rh{sub 2}Cd{sub 5} crystallizes with a unit cell containing 14 atoms, in the orthorhombic space group Pbam (55). The crystal structure of Rh{sub 2}Cd{sub 5} can be described as a defect form of the In{sub 3}Pd{sub 5} structure with ordered vacancies, formed of two 2D atomic layers with the stacking sequence: ABAB. The A type layers consist of (3.6.3.6)-Kagomé nets of Cd atoms while the B type layers consist of (3{sup 5}) (3{sup 7})- nets of both Cd and Rh atoms. The stability of this line phase is investigated by first principle electronic structure calculations on the model of ordered Rh{sub 2}Cd{sub 5}. - Graphical abstract: (3.6.3.6)-Kagomé nets of cadmium atoms (top) and (3{sup 5}) (3{sup 7})- nets of both cadmium and rhodium atoms (bottom) in the structure of Rh{sub 2}Cd{sub 5}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure and coercivity in alnico 9

Magnetic property enhancement of alnico, a rare-earth free permanent magnet, is highly dependent on both the initial microstructure and the evolution of the spinodal decomposition (SD) inside each grain during the heat treatment process. The size, shape and distribution of the magnetic FeCo-rich (α 1 ) phase embedded in continuous non-magnetic AlNi-rich (α 2 ) phase as well as a minor Cu-enriched phase residing in between are shown to be crucial in controlling coercivity. Phase and magnetic domain morphology in a commercial alnico 9 alloy was studied using a combination of structural characterization techniques, including scanning electron microscopy, electron backscatter diffraction, aberration-corrected scanning transmission electron microscopy and Lorentz microscopy. Our results showed that casting created structural nonuniformity and defects, such as porosity, TiS 2 precipitates and grain misorientation, are heterogeneously distributed, with the center section having the best crystallographic orientation and minimal defects. The optimal spinodal is a “mosaic structure”, composed of rod-shape α1 phase with {110} or {100} planar faceting and diameter of ~30–45nm. There is also a Cu-enriched phase residing at the corners of two < 110 > facets of the α1 phase. Furthermore, it was observed that grain boundary phase reverse magnetization direction at lower external magnetic field compared to the SD region inside the grain. Improving grain orientation uniformity, reducing detrimental grain boundary phase volume fraction, and the branching of the α 1 rods, as well as their diameter, are promising routes to improve energy product of alnico.

36 MATERIALS SCIENCE↗

Casting and Characterization of U-50Zr

Uranium alloyed with 50 wt% zirconium (U-50Zr) is a proposed light water reactor (LWR) nuclear fuel by Lightbridge Corporation (LTBR). The proposed method for making the U-50Zr alloy is to arc-melt master alloys and then remelt in a vacuum induction melter (VIM) to consolidate the material and cast into an intermediate shape. After casting, the material will eventually need to be formed into a desired fuel shape. The work discussed in this report resulted from a joint effort between Ltbr and Pacific Northwest National Laboratory (PNN) to investigate a 500g – 1kg scale casting process to produce the U-50Zr alloy in the desired δ-UZr 2 phase and characterize the impurities and microstructure that result from the casting process. Master alloys were fabricated in an arc melter, then five castings were carried out in a VIM with multiple inert coating and crucible materials to find an appropriate combination. Both ZrO 2 and graphite crucibles were used and different combinations of Y 2 O 3 , CaZrO 3 , and TiC to identify which would contain the molten metal with the least reaction. On each casting, the C, O, N, H impurities were analyzed as well as the phase by x-ray diffraction and microstructure. Of the five castings, two resulted in majority of δ-UZr 2 phase-pure material and had impurity levels within acceptable ranges. The two most successful castings utilized a graphite crucible with a TiC undercoating and a Y 2 O 3 overcoat. The O and N levels were below 1000 ppm and the C content was variable but did not result in measurable carbide formation. The highest success casting resulted in an average of 282 ppm C, 567 ppm O, 217 ppm N and 79 ppm H. This casting's crucible and inert coating material was repeated with slightly different casting parameters and resulted in higher C numbers but similar phase identification. The differences between each casting are discussed and recommendations are made for future experiments to better decide on a casting process to go forward with.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The Modeled Seasonal Cycles of Surface N 2 O Fluxes and Atmospheric N 2 O

Nitrous oxide (N 2 O) is a greenhouse gas and stratospheric ozone-depleting substance with large and growing anthropogenic emissions. Previous studies identified the influx of N 2 O-depleted air from the stratosphere to partly cause the seasonality in tropospheric N 2 O (aN 2 O), but other contributions remain unclear. Here, we combine surface fluxes from eight land and four ocean models from phase 2 of the Nitrogen/N 2 O Model Intercomparison Project with tropospheric transport modeling to simulate aN 2 O at eight remote air sampling sites for modern and pre-industrial periods. Models show general agreement on the seasonal phasing of zonal-average N 2 O fluxes for most sites, but seasonal peak-to-peak amplitudes differ several-fold across models. The modeled seasonal amplitude of surface aN 2 O ranges from 0.25 to 0.80 ppb (interquartile ranges 21%–52% of median) for land, 0.14–0.25 ppb (17%–68%) for ocean, and 0.28–0.77 ppb (23%–52%) for combined flux contributions. The observed seasonal amplitude ranges from 0.34 to 1.08 ppb for these sites. The stratospheric contributions to aN 2 O, inferred by the difference between the surface-troposphere model and observations, show 16%–126% larger amplitudes and minima delayed by ~1 month compared to Northern Hemisphere site observations. Land fluxes and their seasonal amplitude have increased since the pre-industrial era and are projected to grow further under anthropogenic activities. Our results demonstrate the increasing importance of land fluxes for aN 2 O seasonality. Considering the large model spread, in situ aN 2 O observations and atmospheric transport-chemistry models will provide opportunities for constraining terrestrial and oceanic biosphere models, critical for projecting carbon-nitrogen cycles under ongoing global warming.

54 ENVIRONMENTAL SCIENCES↗

Negative-Ion Formation upon Soft X-ray Photoexcitation of 2-Propanol

This study investigates the formation of negative ion fragments from gas-phase 2-propanol molecules after interaction with soft X-rays near the O K-edge. The experiment was performed by detecting negative and positive ions in coincidence with time-of-flight spectrometry. The analysis of two- and three-ion coincidence data revealed that nine different anions were produced: H – , C – , CH – , CH 2 – , O – , OH – , C 2 – , C 2 H – , and C 3 – . For all anions, the most common three-ion events were those involving two protons. The results highlight the sensitivity of negative-ion/positive-ion coincidence spectroscopy and provide new insight into the fragmentation processes of organic molecules under soft X-ray excitation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Advanced Modular Sub-Atmospheric Hybrid Heat Engine (Phase 1 Final Report)

The Phase 1 Final Report describes the results of the work completed during the “Advanced Modular Sub-Atmospheric Hybrid Heat Engine” project. The objectives of Phase 1 work were to develop a conceptual design of the turbine-based modular hybrid heat engine (MHHE), including thermodynamic cycle analysis, define the nominal engine component boundary conditions, identify technology gaps, and develop a detailed test plan to address these gaps through bench scale testing in a potential subsequent Phase 2 project. To achieve the project objective, the following activities were performed in Phase 1 work: (1) Market analysis and primary fuel selection, (2) Conceptual design and integrated layout development, (3) Design support and key components characterization, (4) Planning to move technology to pre-commercial demonstration.

42 ENGINEERING↗

Deformation-induced {alpha}{sub 2} {yields} {gamma} phase transformation in TiAl alloys

Deformation-induced {alpha}{sub 2} {yields} {gamma} phase transformation in high Nb containing TiAl alloys was investigated using high-resolution transmission electron microscopy (HREM) and energy dispersive X-ray spectroscopy (EDS). The dislocations appearing at the tip of deformation-induced {gamma} plate (DI-{gamma}) and the stacking sequence change of the {alpha}{sub 2} matrix were two key evidences for determining the occurrence of the deformation-induced {alpha}{sub 2} {yields} {gamma} phase transformation. Compositional analysis revealed that the product phase of the room-temperature transformation was not standard {gamma} phase; on the contrary, the product phase of the high-temperature transformation was standard {gamma} phase.

36 MATERIALS SCIENCE↗

High-pressure transitions in MgAl{sub 2}O{sub 4} and a new high-pressure phase of Mg{sub 2}Al{sub 2}O{sub 5}

Phase transitions in MgAl{sub 2}O{sub 4} were examined at 21-27 GPa and 1400-2500 deg. C using a multianvil apparatus. A mixture of MgO and Al{sub 2}O{sub 3} corundum that are high-pressure dissociation products of MgAl{sub 2}O{sub 4} spinel combines into calcium-ferrite type MgAl{sub 2}O{sub 4} at 26-27 GPa and 1400-2000 deg. C. At temperature above 2000 deg. C at pressure below 25.5 GPa, a mixture of Al{sub 2}O{sub 3} corundum and a new phase with Mg{sub 2}Al{sub 2}O{sub 5} composition is stable. The transition boundary between the two fields has a strongly negative pressure-temperature slope. Structure analysis and Rietveld refinement on the basis of the powder X-ray diffraction profile of the Mg{sub 2}Al{sub 2}O{sub 5} phase indicated that the phase represented a new structure type with orthorhombic symmetry (Pbam), and the lattice parameters were determined as a=9.3710(6) A, b=12.1952(6) A, c=2.7916(2) A, V=319.03(3) A{sup 3}, Z=4. The structure consists of edge-sharing and corner-sharing (Mg, Al)O{sub 6} octahedra, and contains chains of edge-sharing octahedra running along the c-axis. A part of Mg atoms are accommodated in six-coordinated trigonal prism sites in tunnels surrounded by the chains of edge-sharing (Mg, Al)O{sub 6} octahedra. The structure is related with that of ludwigite (Mg, Fe{sup 2+}){sub 2}(Fe{sup 3+}, Al)(BO{sub 3})O{sub 2}. The molar volume of the Mg{sub 2}Al{sub 2}O{sub 5} phase is smaller by 0.18% than sum of molar volumes of 2MgO and Al{sub 2}O{sub 3} corundum. High-pressure dissociation to the mixture of corundum-type phase and the phase with ludwigite-related structure has been found only in MgAl{sub 2}O{sub 4} among various A{sup 2+}B{sup 3+}{sub 2}O{sub 4} compounds. - Graphical abstract: MgAl{sub 2}O{sub 4} dissociates into a mixture of Al{sub 2}O{sub 3} corundum and a new high-pressure phase of Mg{sub 2}Al{sub 2}O{sub 5} at high pressures and temperatures. The Mg{sub 2}Al{sub 2}O{sub 5} phase represents a new structure type with orthorhombic symmetry, showing the projection to (0 0 1) plane. The structure consists of edge- and corner-shared (Mg, Al)O{sub 6} octahedra, and contains chains of edge-shared octahedra running along the c-axis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thickness-dependent phase transition kinetics in lithium-intercalated MoS 2

The phase transitions of two-dimensional (2D) materials are key to the operation of many devices with applications including energy storage and low power electronics. Nanoscale confinement in the form of reduced thickness can modulate the phase transitions of 2D materials both in their thermodynamics and kinetics. Here, using in situ Raman spectroscopy we demonstrate that reducing the thickness of MoS 2 below five layers slows the kinetics of the phase transition from 2H- to 1T'-MoS 2 induced by the electrochemical intercalation of lithium. In this study, we observe that the growth rate of 1T' domains is suppressed in thin MoS 2 supported by SiO 2 , and attribute this growth suppression to increased interfacial effects as the thickness is reduced below 5 nm. In this study, the suppressed kinetics can be reversed by placing MoS 2 on a 2D hexagonal boron nitride ( h BN) support, which readily facilitates the release of strain induced by the phase transition. Additionally, we show that the irreversible conversion of intercalated 1T'-MoS 2 into Li2S and Mo is also thickness-dependent and the stability of 1T'-MoS 2 is significantly increased below five layers, requiring a much higher applied electrochemical potential to break down 1T'-MoS 2 into Li 2 S and Mo nanoclusters.

36 MATERIALS SCIENCE↗

A new way of phase identification, of AgGaGeS{sub 4}∙nGeS{sub 2} crystals

The phase identification of AgGaGeS{sub 4}·nGeS{sub 2} (n=0–4) crystals grown by vertical Bridgman–Stockbarger technique was carried out to find the boundary value n between a homogeneous solid solution and its mixture with GeS{sub 2}. To obtain reliable results, the conventional methods of X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX) were completed by less common vapor pressure measurement in a closed volume and precise density measurements, which are very sensitive to the detection of small amounts of crystalline and glassy GeS{sub 2} and heterogeneous state of the crystals. The boundary value n=1.5 at 1045 K and the coexistence of the solid solution AgGaGeS{sub 4}·1.5GeS{sub 2} with the β-GeS{sub 2} phase for n>1.5 was found. Glassy GeS{sub 2} (∼2 mol%) was revealed by vapor pressure measurement and XRD studies in all the crystals. This is discussed in terms of the supersaturated solid solution decomposition upon temperature decreasing and the microphase separation of overcooled melt near the melting point under non-equilibrium crystallization. For the first time, the p–T dependence for glassy GeS{sub 2} was measured by the vapor pressure measurements. - Graphical abstract: lg p–1/T dependences of as-grown AgGaGeS{sub 4}·nGeS{sub 2} crystals. - Highlights: • Vapor pressure measurement as a powerful tool of phase identification. • Thermal characteristics of glassy GeS{sub 2}. • The homogeneity range of AgGaGeS{sub 4} from the GeS{sub 2} side.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Corrosion Protection of Cu Electrical Cable by W-Ni Composite Coatings Doped with TiO{sub 2} Nanoparticles: Influence of Pulse Currents

W-Ni-TiO{sub 2} nano-composite layers were electrodeposited on copper surface by both direct (DC) and pulse (PC) currents. The copper substrates are samples from the main electrical cable used for the Renault K-Z (the latest 100% electric vehicle). In order to investigate coating morphology, atomic force microscopy was used, while energy-dispersive x-ray analysis was applied to determine nano-composite composition. Based on surface morphology, the W-Ni-TiO{sub 2} (DC) alloy surface was covered by massive agglomerates, especially when the W-Ni-TiO{sub 2} (PC) nano-composite coating was more compact, thicker and exhibited smaller grain size. The coated surface revealed different contents such as 43.4 and 65.4% of W in DC and PC coatings, respectively, which are considered to be a novel composition of the W-Ni alloy. XRD studies revealed that the NiW{sub 2} phase only occurs in the W-Ni-TiO{sub 2} (PC) nano-composite alloy. Electrical and thermal conductivities, microhardness and porosity values are enhanced by the addition of TiO{sub 2} to the alloy.

36 MATERIALS SCIENCE↗

Microstructural changes in NiO–ScSZ composite following reduction processes in pure and diluted hydrogen

A Ni–ScSZ cermet is widely used as the anode in a solid oxide fuel cell because it possesses the appropriate electrochemical properties. However, it is susceptible to degradation during operation. Samples of a NiO–ScSZ composite were reduced in pure and diluted hydrogen to determine the microstructural evolution and the degradation behavior of the material. The resulting changes in microstructure were investigated using scanning transmission electron microscopy, X-ray energy dispersive spectroscopy and electron energy loss spectroscopy. The resulting data revealed that the various conditions during the reduction processes had a significant effect on the microstructures. The high porosity of the reduced nickel phase and cracking between the Ni and the ZrO{sub 2} phases after reduction resulted in a reduction in the strength of the anode material. - Highlights: • Structure of NiO/Ni strongly depends on the concentration of reduction atmosphere • Scandium rich precipitations are visible in YSZ phase after reduction process • Nanopores and nanograins are formed in reduced Ni phase.

36 MATERIALS SCIENCE↗

X-ray photoelectron spectroscopy study of high-k CeO{sub 2}/La{sub 2}O{sub 3} stacked dielectrics

This work presents a detailed study on the chemical composition and bond structures of CeO{sub 2}/La{sub 2}O{sub 3} stacked gate dielectrics based on x-ray photoelectron spectroscopy (XPS) measurements at different depths. The chemical bonding structures in the interfacial layers were revealed by Gaussian decompositions of Ce 3d, La 3d, Si 2s, and O 1s photoemission spectra at different depths. We found that La atoms can diffuse into the CeO{sub 2} layer and a cerium-lanthanum complex oxide was formed in between the CeO{sub 2} and La{sub 2}O{sub 3} films. Ce{sup 3+} and Ce{sup 4+} states always coexist in the as-deposited CeO{sub 2} film. Quantitative analyses were also conducted. The amount of CeO{sub 2} phase decreases by about 8% as approaching the CeO{sub 2}/La{sub 2}O{sub 3} interface. In addition, as compared with the single layer La{sub 2}O{sub 3} sample, the CeO{sub 2}/La{sub 2}O{sub 3} stack exhibits a larger extent of silicon oxidation at the La{sub 2}O{sub 3}/Si interface. For the CeO{sub 2}/La{sub 2}O{sub 3} gate stack, the out-diffused lanthanum atoms can promote the reduction of CeO{sub 2} which produce more atomic oxygen. This result confirms the significant improvement of electrical properties of CeO{sub 2}/La{sub 2}O{sub 3} gated devices as the excess oxygen would help to reduce the oxygen vacancies in the film and would suppress the formation of interfacial La-silicide also.

36 MATERIALS SCIENCE↗