Search NASA⌕ Search

SEARCH · Search NASA

Results for “Resource availability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Flooding of Monroe County, Michigan - A comparison of three remote sensor data sets

During the spring of 1973, three techniques were used to obtain remotely sensed data pertaining to the flooded shoreline of Monroe County, Michigan. Although digitized data from the Earth Resources Technology Satellite were available on magnetic tapes, analysis was based on interpretation methods normally used for aerial photography, since the black and white IR photography and side-looking airborne radar (SLAR) data were available only as images. Using IR photography as the standard, it was found that ERTS-1 Band 7 imagery had a 93% accuracy in detecting areas in the combined category of open water and flooded fields. X(HH) data from SLAR detected that built-up and wet areas were built-up (89 to 100% accuracy), but not that they were wet. It is suggested that these two sensors used in concert from orbital heights could provide information useful to relief organizations in flooded areas. It is considered likely that SLAR data will improve as higher resolution becomes available.

Bryan, M. L.↗
NASA NTRS1981

A comparison of two methods for classifying forestland

Two methods of developing land-cover classifications using Landsat multispectral data were compared. The first method, called P-1, uses a semi-automated approach to develop training statistics which characterize the land-cover types. The second, called multicluster blocks, depends more on analyst interaction to produce the training statistics used by the classifier. The results showed that P-1 performed as well as the multicluster-blocks approach on a mountainous study area in southwestern Colorado. These results may interest any resource discipline which has available to it ground-checked or photointerpreted information. P-1 can use this information directly to output a land-cover classification with little analyst interaction.

Nelson, R. F.↗
NASA NTRS1983

Space transportation system biomedical operations support study

The shift of the Space Transportation System (STS) flight tests of the orbiter vehicle to the preparation and flight of the payloads is discussed. Part of this change is the transition of the medical and life sciences aspects of the STS flight operations to reflect the new state. The medical operations, the life sciences flight experiments support requirements and the intramural research program expected to be at KSC during the operational flight period of the STS and a future space station are analyzed. The adequacy of available facilities, plans, and resources against these future needs are compared; revisions and/or alternatives where appropriate are proposed.

White, S. C.↗
NASA NTRS1982

Life sciences flight experiments program mission science requirements document. The first life sciences dedicated Spacelab mission, part 1

The Mission Science Requirements Document (MSRD) for the First Dedicated Life Sciences Mission (LS-1) represents the culmination of thousands of hours of experiment selection, and science requirement definition activities. NASA life sciences has never before attempted to integrate, both scientifically and operationally, a single mission dedicated to life sciences research, and the complexity of the planning required for such an endeavor should be apparent. This set of requirements completes the first phase of a continual process which will attempt to optimize (within available programmatic and mission resources) the science accomplished on this mission.

Rummel, J. A.↗
NASA NTRS1987

Applications of computational modeling in ballistics

The development of the technology of ballistics as applied to gun launched Army weapon systems is the main objective of research at the U.S. Army Ballistic Research Laboratory (BRL). The primary research programs at the BRL consist of three major ballistic disciplines: exterior, interior, and terminal. The work done at the BRL in these areas was traditionally highly dependent on experimental testing. A considerable emphasis was placed on the development of computational modeling to augment the experimental testing in the development cycle; however, the impact of the computational modeling to this date is modest. With the availability of supercomputer computational resources recently installed at the BRL, a new emphasis on the application of computational modeling to ballistics technology is taking place. The major application areas are outlined which are receiving considerable attention at the BRL at present and to indicate the modeling approaches involved. An attempt was made to give some information as to the degree of success achieved and indicate the areas of greatest need.

Sturek, Walter B.↗
NASA NTRS1988

Helium-3 blankets for tritium breeding in fusion reactors

It is concluded that He-3 blankets offers considerable promise for tritium breeding in fusion reactors: good breeding potential, low operational risk, and attractive safety features. The availability of He-3 resources is the key issue for this concept. There is sufficient He-3 from decay of military stockpiles to meet the International Thermonuclear Experimental Reactor needs. Extraterrestrial sources of He-3 would be required for a fusion power economy.

Steiner, Don↗
NASA NTRS1988

Programmed environment management of confined microsocieties

A programmed environment is described that assists the implementation and management of schedules governing access to all resources and information potentially available to members of a confined microsociety. Living and work schedules are presented that were designed to build individual and group performance repertoires in support of study objectives and sustained adaptation by participants. A variety of measurement requirements can be programmed and standardized to assure continuous assessment of the status and health of a confined microsociety.

Emurian, Henry H.↗
NASA NTRS1988

Ground operation of space-based telerobots will enhance productivity

Due to the limited human resources which will be available on the U.S. Space Station, automation and robotics technologies are being developed to enhance the productivity on the Space Station. The need for space telerobots which can be operated from the ground is explored, taking into consideration the resulting time delay, the technology involved, and some currently planned experiments. The proposed experiments include a remote link with the Kennedy Space Center robotics laboratory and the Telerobot Intelligent Interface Flight Experiment (TRIIFEX). It is concluded that there is a need to develop and implement ground-remote telerobotics technology which can effectively operate in the time-delay environment. This capability will enable servicing operations in polar and geosynchronous orbits and assist EVA astronauts on the Space Station.

Schober, Wayne R.↗
NASA NTRS1991

Using NetMaster to manage IBM networks

After defining a network and conveying its importance to support the activities at the JSC, the need for network management based on the size and complexity of the IBM SNA network at JSC is demonstrated. Network Management consists of being aware of component status and the ability to control resources to meet the availability and service needs of users. The concerns of the user are addressed as well as those of the staff responsible for managing the network. It is explained how NetMaster (a network management system for managing SNA networks) is used to enhance reliability and maximize service to SNA network users through automated procedures. The following areas are discussed: customization, problem and configuration management, and system measurement applications of NetMaster. Also, several examples are given that demonstrate NetMaster's ability to manage and control the network, integrate various product functions, as well as provide useful management information.

Ginsburg, Guss↗
NASA NTRS1990

Annual Research Briefs, 1989

This report contains the 1989 annual progress reports of the Research Fellows of the Center for Turbulence Research. It is intended as a year end report to NASA, Ames Research Center which supports this group through core funding and by making available physical and intellectual resources. The Center for Turbulence Research is devoted to the fundamental study of turbulent flows; its objectives are to simulate advances in the physical understanding of turbulence, in turbulence modeling and simulation, and in turbulence control. The reports appearing in the following pages are grouped in the general areas of modeling, experimental research, theory, simulation and numerical methods, and compressible and reacting flows.

Debra Spinks↗
NASA NTRS1992

Autonomous power system: Integrated scheduling

The Autonomous Power System (APS) project at NASA Lewis Research Center is designed to demonstrate the abilities of integrated intelligent diagnosis, control and scheduling techniques to space power distribution hardware. The project consists of three elements: the Autonomous Power Expert System (APEX) for fault diagnosis, isolation, and recovery (FDIR), the Autonomous Intelligent Power Scheduler (AIPS) to determine system configuration, and power hardware (Brassboard) to simulate a space-based power system. Faults can be introduced into the Brassboard and in turn, be diagnosed and corrected by APEX and AIPS. The Autonomous Intelligent Power Scheduler controls the execution of loads attached to the Brassboard. Each load must be executed in a manner that efficiently utilizes available power and satisfies all load, resource, and temporal constraints. In the case of a fault situation on the Brassboard, AIPS dynamically modifies the existing schedule in order to resume efficient operation conditions. A database is kept of the power demand, temporal modifiers, priority of each load, and the power level of each source. AIPS uses a set of heuristic rules to assign start times and resources to each load based on load and resource constraints. A simple improvement engine based upon these heuristics is also available to improve the schedule efficiency. This paper describes the operation of the Autonomous Intelligent Power Scheduler as a single entity, as well as its integration with APEX and the Brassboard. Future plans are discussed for the growth of the Autonomous Intelligent Power Scheduler.

Ringer, Mark J.↗
NASA NTRS1993

It's time to go supersonic

An overview is presented of the most compelling technological and economic arguments for NASA's agressive coordination of an SST-development program that would enlist all available U.S. aerospace industry resources. Attention is given to the minimization of upper atmosphere pollution through the use of low-NO(x) emission combustors and the reduction of sonic boom through wing/fuselage optimization. It is projected that a successful SST program would boost U.S. civil aircraft market share to nearly 80 percent; this represents the creation of 140,000 new jobs.

Goldin, Daniel S.↗
NASA NTRS1994

Building brains for bodies

We describe a project to capitalize on newly available levels of computational resources in order to understand human cognition. We will build an integrated physical system including vision, sound input and output, and dextrous manipulation, all controlled by a continuously operating large scale parallel MIMD computer. The resulting system will learn to 'think' by building on its bodily experiences to accomplish progressively more abstract tasks. Past experience suggests that in attempting to build such an integrated system we will have to fundamentally change the way artificial intelligence, cognitive science, linguistics, and philosophy think about the organization of intelligence. We expect to be able to better reconcile the theories that will be developed with current work in neuroscience.

Brooks, Rodney Allen↗
NASA NTRS1992

Cognition and procedure representational requirements for predictive human performance models

Models and modeling environments for human performance are becoming significant contributors to early system design and analysis procedures. Issues of levels of automation, physical environment, informational environment, and manning requirements are being addressed by such man/machine analysis systems. The research reported here investigates the close interaction between models of human cognition and models that described procedural performance. We describe a methodology for the decomposition of aircrew procedures that supports interaction with models of cognition on the basis of procedures observed; that serves to identify cockpit/avionics information sources and crew information requirements; and that provides the structure to support methods for function allocation among crew and aiding systems. Our approach is to develop an object-oriented, modular, executable software representation of the aircrew, the aircraft, and the procedures necessary to satisfy flight-phase goals. We then encode in a time-based language, taxonomies of the conceptual, relational, and procedural constraints among the cockpit avionics and control system and the aircrew. We have designed and implemented a goals/procedures hierarchic representation sufficient to describe procedural flow in the cockpit. We then execute the procedural representation in simulation software and calculate the values of the flight instruments, aircraft state variables and crew resources using the constraints available from the relationship taxonomies. The system provides a flexible, extensible, manipulative and executable representation of aircrew and procedures that is generally applicable to crew/procedure task-analysis. The representation supports developed methods of intent inference, and is extensible to include issues of information requirements and functional allocation. We are attempting to link the procedural representation to models of cognitive functions to establish several intent inference methods including procedural backtracking with concurrent search, temporal reasoning, and constraint checking for partial ordering of procedures. Finally, the representation is being linked to models of human decision making processes that include heuristic, propositional and prescriptive judgement models that are sensitive to the procedural content in which the valuative functions are being performed.

Corker, K.↗
NASA NTRS1984

Report of the Panel on Computer and Information Technology

Aircraft have become more and more dependent on computers (information processing) for improved performance and safety. It is clear that this activity will grow, since information processing technology has advanced by a factor of 10 every 5 years for the past 35 years and will continue to do so. Breakthroughs in device technology, from vacuum tubes through transistors to integrated circuits, contribute to this rapid pace. This progress is nearly matched by similar, though not as dramatic, advances in numerical software and algorithms. Progress has not been easy. Many technical and nontechnical challenges were surmounted. The outlook is for continued growth in capability but will require surmounting new challenges. The technology forecast presented in this report has been developed by extrapolating current trends and assessing the possibilities of several high-risk research topics. In the process, critical problem areas that require research and development emphasis have been identified. The outlook assumes a positive perspective; the projected capabilities are possible by the year 2000, and adequate resources will be made available to achieve them. Computer and information technology forecasts and the potential impacts of this technology on aeronautics are identified. Critical issues and technical challenges underlying the achievement of forecasted performance and benefits are addressed.

Lundstrom, Stephen F.↗
NASA NTRS2000

Materials Science Experiment Module Accommodation within the Materials Science Research Rack (MSRR-1) on the International Space Station (ISS)

The Materials Science Research Rack I (MSRR-1) of the Materials Science Research Facility (MSRF) is a modular facility designed to accommodate two Experiment Modules (EM) simultaneously on board the International Space Station (ISS). One of these EMs will be the NASA/ESA EM being, developed collaboratively by NASA and the European Space Agency. The other EM position will be occupied by various multi-user EMs that will be exchanged in-orbit to accommodate a variety of materials science investigations. This paper discusses the resources, services, and allocations available to the EMs and briefly describes performance capabilities of the EMs currently planned for flight.

Higgins, D. B.↗
NASA NTRS1999

Acceleration Measurement and Characterization in Support of the USMP-4 Payloads

One common characteristic of the USMP-4 experiments is that various effects of gravity make it difficult, if not impossible, to achieve usable results when performing the experiments on Earth's surface. Therefore, the investigators took advantage of the microgravity environment afforded by being in low-Earth orbit to perform their research. Interpretation of the experiment results both during the mission and upon post-mission analyses of data and samples required an understanding of the microgravity environment in which the experiments were conducted. To achieve that understanding, data were collected using the Orbital Acceleration Research Experiment (OARE) and two Space Acceleration Measurement Systems (SAMS). Data from those systems, combined with an assessment of mission and experiment activities, were used to characterize the microgravity environment that existed on Columbia during the mission. The text herein gives details about some characteristics of the environment that were noted during the mission and during post-mission data analysis. The disturbances studied include the Ku-band antenna 17 Hz dither; the effect of changing the Orbiter attitude deadband limits; the effects of different bicycle ergometer configurations; and the effect of IDGE (Isothermal Dendritic Growth Experiment) experiment fans and SAMS computer hard drives. Additional information about the microgravity environment is provided. Supplementary data plots representing the environment throughout the majority of the mission are available at the Uniform Resource Locator (URL). Data files for both SAMS and OARE are accessible via anonymous file transfer protocol from the file server.

Rogers, M. J. B.↗
NASA NTRS2002

Global Precipitation Measurement: Summary of the First GPM Partners Planning Workshop - Report 1

This report provides a synopsis of the proceedings of the First Global Precipitation Measurement (GPM) Partners Planning Workshop held at the University of Maryland, College Park, from May 16 to 18, 2001. GPM consists of a multi-member global satellite constellation (i.e., an international set of satellite missions) and the accompanying scientific research program, with the main goal of providing frequent, accurate, and globally distributed precipitation measurements essential in understanding several fundamental issues associated with the global water and energy cycle (GWEC). The exchange of scientific and technical information at this and subsequent GPM workshops between representatives from around the world represents a key step in the formulation phase of GPM mission development. The U.S. National Aeronautics and Space Agency (NASA), the National Space Development Agency of Japan (NASDA), and other interested agencies from nations around the world seek to observe, understand, and model the Earth system to learn how it is changing and what consequences these changes have on life, particularly as they pertain to hydrological processes and the availability of fresh water resources. GWEN processes are central to a broader understanding of the Earth system.

Shepherd, J. Marshall↗