Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sensitivity Matrix”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Hole Transfer in Dye-Sensitized Cesium Lead Halide Perovskite Photovoltaics: Effect of Interfacial Bonding

Lead halide perovskites have gained attention as an active material in solid-state dye-sensitized photovoltaics due to their high absorption of visible light and long charge-transport lengths. In perovskite-based dye-sensitized photovoltaic architectures the perovskite material is typically paired with a hole-transport material, such as spiro-OMeTAD, which extracts a hole from the photoexcited perovskite to generate free charge carriers. In this study, we explored two competing charge-transfer pathways at the interface between lead halide perovskite and spiro-OMeTAD: “through-bond” and “through-space”. For the through-bond pathway we use a segment of spiro-OMeTAD that contains methoxy linker groups, which will be referred to as “dye with methoxy linker groups” (DML). For the through-space pathway we use a segment of spiro-OMeTAD with removed linker groups, triphenylamine, which will be referred to as “dye”. Four atomistic models were studied: (I) a periodic cesium lead iodide (CsPbI3) perovskite nanowire (NW) that is paired with the dye molecule, (II) a periodic CsPbI3 perovskite NW paired with the DML molecule where the linker groups form coordination bond to the surface of the nanowire, (III) a CsPbI 3 perovskite thin film (TF) paired with the dye molecule, and (IV) a CsPbI 3 perovskite TF paired with the DML molecule. Charge-transfer dynamics, providing rates of electron/hole relaxation and relaxation pathways, are calculated using reduced density matrix formalism using Redfield theory. Finally, it was found that the terminal surface of the perovskite (Pb–I vs Cs–I) has important implications for energetic alignment at the perovskite–dye interface due to band bending. Finally, computed charge-transfer rates match well with upper and lower bounds of reported experimental results where “fast” picosecond rates correspond to through-bond pathway and “slow” nanosecond rates correspond to through-space.

14 SOLAR ENERGY↗

Uncertainty Measurement for Trace Element Analysis of Uranium and Plutonium Samples by Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) and Inductively Coupled Plasma-Mass Spectrometry (ICP-MS)

The measurement uncertainty estimation associated with trace element analysis of impurities in U and Pu was evaluated using the Guide to the Expression of Uncertainty Measurement (GUM). I this evaluation the uncertainty sources were identified and standard uncertainties for the components were categorized as either Type A or B. The combined standard uncertainty was calculated and a coverage factor k = 2 was applied to obtain the expanded uncertainty, U. The ICP-AES and ICP-MS methods used were developed for the multi-element analysis of U and Pu samples. A typical analytical run consists of standards, process blanks, samples, matrix spiked samples, post digestion spiked samples and independent calibration verification standards. The uncertainty estimation was performed on U and Pu samples that have been analyzed previously as part of the U and Pu Sample Exchange Programs. Control chart results and data from the U and Pu metal exchange programs were combined with the GUM into a concentration dependent estimate of the expanded uncertainty. Comparison of trace element uncertainties obtained using this model was compared to those obtained for trace element results as part of the Exchange programs. This process was completed for all trace elements that were determined to be above the detection limit for the U and Pu samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PROJECTED IMPACT OF SULFATE ATTACK ON THE LONG-TERM PERFORMANCE OF A CONCRETE REPOSITORY

Saltstone is a cementitious waste form made by mixing salt solution originating from liquid waste storage tanks at the DOE Savannah River Site with a dry mix containing blast furnace slag, fly ash, and cement or lime. The wet mix is poured into a concrete repository for on-site disposal. Solidified Saltstone is a dense, alkaline, reducing, micro-porous, monolithic, cementitious matrix, containing a solution of salts within its pore structure. Sodium sulfate concentrations in the pore fluid are around 0.15 mol/L, and external sulfate attack on concrete barriers is expected to occur over time. To predict the long-term performance of concrete repositories, the STADIUM{reg_sign} code was used to simulate the reactive transport processes leading to formation of ettringite, an expansive mineral phase often associated with spalling or cracking. STADIUM{reg_sign} is a multi-ionic transport model based on a split operator approach that separates ionic movement and chemical reactions. Ionic transport is described by the extended Nernst-Planck equation for unsaturated media, and accounts for electrical coupling between ionic species, chemical activity, transport due to water content gradient, and temperature effects. STADIUM{reg_sign} does not predict whether physical damage will occur, or the impact on transport properties should fracturing occur. Thus the presence of ettringite was assumed to coincide with physical damage for the purpose of estimating effective transport properties. Effective properties for concrete barriers were estimated assuming complete hydraulic failure behind the ettringite front and unaltered properties ahead of the front. The ettringite front advances at a rate dependent on the diffusion coefficient assumed for the failed zone. A sensitivity study indicates a service life ranging from thousands to tens of thousands of years, depending on the barrier thickness and sulfate exposure conditions among other factors.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Celestial amplitudes from UV to IR

Celestial amplitudes represent 4D scattering of particles in boost, rather than the usual energy-momentum, eigenstates and hence are sensitive to both UV and IR physics. We show that known UV and IR properties of quantum gravity translate into powerful constraints on the analytic structure of celestial amplitudes. For example the soft UV behavior of quantum gravity is shown to imply that the exact four-particle scattering amplitude is meromorphic in the complex boost weight plane with poles confined to even integers on the negative real axis. Would-be poles on the positive real axis from UV asymptotics are shown to be erased by a flat space analog of the AdS resolution of the bulk point singularity. The residues of the poles on the negative axis are identified with operator coefficients in the IR effective action. Far along the real positive axis, the scattering is argued to grow exponentially according to the black hole area law. Exclusive amplitudes are shown to simply factorize into conformally hard and conformally soft factors. The soft factor contains all IR divergences and is given by a celestial current algebra correlator of Goldstone bosons from spontaneously broken asymptotic symmetries. The hard factor describes the scattering of hard particles together with the boost-eigenstate clouds of soft photons or gravitons required by asymptotic symmetries. These provide an IR safe S-matrix for the scattering of hard particles.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Scintillating Cocktail Mixtures and the Role of Water on the Optophysical Properties.

Two types of water - containing liquid scintillation mixtures were prepared in the present work. In the first, m ixtures of 2 - phenylethanol, water, diphenyl phosphate, sodium phenyl phosphate dibasic dihydrate, and the dye 2,5 - diphenyloxazole (PPO) have been investigated as liquid scintillators. In the second system, nonionic and mixed surfactant systems were investigated in conjunction with water and small amounts of toluene. In both cases, increasing amounts of water led to reductions in the scintillation light yield. Understanding what factors contr ibute to this phenomenon is the focus of this report. Changes in the solution microphase structure, diminishing aromatic content of the cocktail mixtures, and inefficient energy transfer to the dye a ppear to be responsible for the decreased light yield as more water is added . In the 2 - phenylethanol system, the observed experimental results are consistent with the formation of a bicontinuous microemulsion at higher water concentrations, which incorporates PPO and shields it from the quenching effects of the increasing polar matrix. Evidence for this proposed phase change comes from light scattering data, photo - and x - ray luminescence measurements, and optical transparency measurements . In the surfactant - based system, the quenching effect of water was found to be less than both commercially - available dioxane - naphthalene mixtures used for scintillation counting as well as the 2 - phenylethanol mixtures described above. The effect of different surfactant mixtures and concentrations were studied, revealing a benefic ial effect upon the scintillation light yield for mixed surfactant mixtures. These results are interpreted in the context of reactive radical species formation following water ionization , which leads to light - yield quenching in aqueous systems . The presence of surfactant(s) in these mixtures enables the formation of organic - rich regions that are spatially separated from the reactive radicals. This hypothesis is consistent with subsequent experiments that showed reduced light - yield quenching in the presence of radical - trapping additives. A notable result from these surfactant studies was the preparation of an aqueous scintillator that was transparent and showed neutron/gamma pulse - shape discrimination. Section II below provides background information on the significance of this finding. The combined work described herein has implications on other efforts to make water - based solution scintillators -- without aromatic content an efficient mechanism for ionizing radiation to sensitize emission from a dye is limited.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The role of irradiation-enhanced interstitial diffusion in over-pressurizing fission gas bubbles in UO 2

Fission gas bubbles in UO 2 nuclear fuel have been observed to exhibit pressures in excess of the equilibrium bubble pressure; however, the cause of bubble over-pressurization has not yet been demonstrated. The mechanical interaction between a bubble and the surrounding matrix or grain boundary depends on the internal pressure of the bubble and local stress state, such that over-pressurized bubbles are thought to be responsible for fragmentation and pulverization, when exposed to a temperature ramp. Here, in this work, we investigate the role of U interstitials, produced through irradiation, in over-pressurizing bubbles by using a combined molecular dynamics (MD) and cluster dynamics approach. Firstly, the energies for the capture of interstitials and vacancies by bubbles have been determined from MD as a function of the ratio of gas atoms to vacancies that make up the bubble. Secondly, these reaction energies have been implemented in the cluster dynamics code Centipede to predict bubble over-pressurization as a function of temperature for typical fission rates. It was found that there is a transition from low pressure bubbles (at high temperatures) to high pressure bubbles (at lower temperatures). The cause of this behavior was shown to be the creation of irradiation-induced interstitials that are highly mobile relative to vacancies at low temperature; whereas, vacancies are sufficiently mobile at high temperatures to limit bubble pressures. This result supports the hypothesis that over-pressurized bubbles form during steady-state operation and that this behavior is highly sensitive to the local pellet temperature.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Minimum detectable activity for tomographic gamma scanning system - 15648

For any radiation measurement system, it is useful to explore and establish the detection limits and a minimum detectable activity (MDA) for the radionuclides of interest, even if the system is to be used at far higher values. The MDA serves as an important figure of merit, and often a system is optimized and configured so that it can meet the MDA requirements of a measurement campaign. The non-destructive assay (NDA) systems based on gamma ray analysis are no exception and well established conventions, such the Currie method, exist for estimating the detection limits and the MDA. However, the Tomographic Gamma Scanning (TGS) technique poses some challenges for the estimation of detection limits and MDAs. The TGS combines high resolution gamma ray spectrometry (HRGS) with low spatial resolution image reconstruction techniques. In non-imaging gamma ray based NDA techniques measured counts in a full energy peak can be used to estimate the activity of a radionuclide, independently of other counting trials. However, in the case of the TGS each 'view' is a full spectral grab (each a counting trial), and each scan consists of 150 spectral grabs in the transmission and emission scans per vertical layer of the item. The set of views in a complete scan are then used to solve for the radionuclide activities on a voxel by voxel basis, over 16 layers of a 10x10 voxel grid. Thus, the raw count data are not independent trials any more, but rather constitute input to a matrix solution for the emission image values at the various locations inside the item volume used in the reconstruction. So, the validity of the methods used to estimate MDA for an imaging technique such as TGS warrant a close scrutiny, because the pair-counting concept of Currie is not directly applicable. One can also raise questions as to whether the TGS, along with other image reconstruction techniques which heavily intertwine data, is a suitable method if one expects to measure samples whose activities are at or just above MDA levels. The paper examines methods used to estimate MDAs for a TGS system, and explores possible solutions that can be rigorously defended. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Proteomic-based mechanistic investigation of low-dose radiation-induced cellular responses/effects

The goal of our project is to apply our unique systems investigation strategy to reveal the molecular mechanisms underlying the radiation induction and transmission of oxidative damage, adaptive response, and bystander effect at low-doses. Beginning with simple in vitro systems such as fibroblast or epithelial pure culture, our amino acid-coded mass tagging (AACT) comparative proteomic platform will be used to measure quantitatively proteomic changes at high- or low-dose level with respect to their endogenous damage levels respectively, in which a broad range of unique regulated proteins sensitive to low-dose IR will be distinguished. To zoom in how these regulated proteins interact with other in the form of networks in induction/transmission pathways, these regulated proteins will be selected as baits for making a series of fibroblast cell lines that stably express each of them. Using our newly developed method of 'dual-tagging' quantitative proteomics that integrate the capabilities of natural complex expression/formation, simple epitope affinity isolation (not through tandem affinity purification or TAP), and 'in-spectra' AACT quantitative measurements using mass spectrometry (MS), we will be able to distinguish systematically interacting proteins with each bait in real time. Further, in addition to both proteome-wide (global differentially expressed proteins) and pathway-scale (bait-specific) profiling information, we will perform a computational network analysis to elucidate a global pathway/mechanisms underlying cellular responses to real-time low-dose IR. Similarly, we will extend our scheme to investigate systematically those induction/transmission pathways occurring in a fibroblast-epithelial interacting model in which the bystander cell (fibroblast) monitor the IR damage to the target cell (epithelial cell). The results will provide the proteome base (molecular mechanisms/pathways for signaling) for the low dose radiation-induced essential tissue environment interactions, including cell-cell, extracellular matrix and extracellular paracrine interactions.

59 BASIC BIOLOGICAL SCIENCES↗

Implicit Formulation of Muscle Dynamics in OpenSim

Astronauts lose bone and muscle mass during spaceflight. Exercise countermeasure is the primary method for counteracting bone and muscle mass loss in space. New spacecraft exercise device concepts are currently being developed for the NASAs new crew exploration vehicle. The NASA Digital Astronaut Project (DAP) uses computational modeling to help determine if the new exercise devices will be effective as countermeasures. The NASA Digital Astronaut Project is developing the ability to utilize predictive simulation to provide insight into the change in kinematics and kinetics with a change in device and gravitational environment (1-g versus 0-g). For example, in space exercise the subject's body weight is applied in addition to the loads prescribed for musculoskeletal maintenance. How and where these loads are applied obviously directly impacts bone and tissue loads. Additionally, due to space vehicle structural requirements, exercise devices are often placed on vibration isolation systems. This changes the apparent impedance or stiffness of the device as seen by the user. Data collection under these conditions is often impractical and limited. Predictive modeling provides a means to have a virtual subject to test hypotheses. Predictive simulation provides a virtual subject for which we are able to perform studies such as sensitivity to device loading and vibration isolation without the need for laboratory kinematic or kinetic test data.Direct Collocation optimization provides an efficient means to perform task based optimization and predictive modeling. It is relatively straight forward to structure a physical exercise task in a Direct Collocation mathematical formulation: perform a motion such that you start at an initial pose, achieve a given amount of deflection i.e a squat, return to the initial pose, and minimize muscle activation cost. Direct Collocation is advantageous in that it does not require numerical integration to evaluate the objective function. Instead, the system dynamics are transformed to discrete time and the optimizer is constrained such that the solution is not considered to be a valid unless the dynamic equations are satisfied at all time points. The simulation and optimization are effectively done simultaneously. Due to the implicit integration, time steps can be more coarse than in a differential equation solver. In a gait scenario this means that that the model constraints and cost function are evaluated at 100 nodes in the gait cycle versus 10,000 integration steps in a variable-step forward dynamic simulation. Furthermore, no time is wasted on accurate simulations of movements that are far from the optimum. Constrained optimization algorithms require a Jacobian matrix that contains the partial derivatives of each of the dynamic constraints with respect to of each of the state and control variables at all time points. This is a large but sparse matrix. An implicit dynamics formulation requires computation of the dynamic residuals f as a function of the states x and their derivatives, and controls u:f(x, dxdt, u) 0If the dynamics of musculoskeletal system are formulated implicitly, the Jacobian elements are often available analytically, eliminating the need for numerical differentiation; this is obviously computationally advantageous. Additionally, implicit formulation of musculoskeletal dynamics do not suffer from singularities from low mass bodies, zero muscle activation, or other stiff system or

physical exercise↗

Active pixel imagers incorporating pixel-level amplifiers based on polycrystalline-silicon thin-film transistors

Active matrix, flat-panel imagers (AMFPIs) employing a 2D matrix of a-Si addressing TFTs have become ubiquitous in many x-ray imaging applications due to their numerous advantages. However, under conditions of low exposures and/or high spatial resolution, their signal-to-noise performance is constrained by the modest system gain relative to the electronic additive noise. In this article, a strategy for overcoming this limitation through the incorporation of in-pixel amplification circuits, referred to as active pixel (AP) architectures, using polycrystalline-silicon (poly-Si) TFTs is reported. Compared to a-Si, poly-Si offers substantially higher mobilities, enabling higher TFT currents and the possibility of sophisticated AP designs based on both n- and p-channel TFTs. Three prototype indirect detection arrays employing poly-Si TFTs and a continuous a-Si photodiode structure were characterized. The prototypes consist of an array (PSI-1) that employs a pixel architecture with a single TFT, as well as two arrays (PSI-2 and PSI-3) that employ AP architectures based on three and five TFTs, respectively. While PSI-1 serves as a reference with a design similar to that of conventional AMFPI arrays, PSI-2 and PSI-3 incorporate additional in-pixel amplification circuitry. Compared to PSI-1, results of x-ray sensitivity demonstrate signal gains of {approx}10.7 and 20.9 for PSI-2 and PSI-3, respectively. These values are in reasonable agreement with design expectations, demonstrating that poly-Si AP circuits can be tailored to provide a desired level of signal gain. PSI-2 exhibits the same high levels of charge trapping as those observed for PSI-1 and other conventional arrays employing a continuous photodiode structure. For PSI-3, charge trapping was found to be significantly lower and largely independent of the bias voltage applied across the photodiode. MTF results indicate that the use of a continuous photodiode structure in PSI-1, PSI-2, and PSI-3 results in optical fill factors that are close to unity. In addition, the greater complexity of PSI-2 and PSI-3 pixel circuits, compared to that of PSI-1, has no observable effect on spatial resolution. Both PSI-2 and PSI-3 exhibit high levels of additive noise, resulting in no net improvement in the signal-to-noise performance of these early prototypes compared to conventional AMFPIs. However, faster readout rates, coupled with implementation of multiple sampling protocols allowed by the nondestructive nature of pixel readout, resulted in a significantly lower noise level of {approx}560 e (rms) for PSI-3.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

THETRIS: A MICRO-SCALE TEMPERATURE AND GAS RELEASE MODEL FOR TRISO FUEL

The dominating mechanism in the passive safety of gas-cooled, graphite-moderated, high-temperature reactors (HTRs) is the Doppler feedback effect. These reactor designs are fueled with sub-millimeter sized kernels formed into TRISO particles that are imbedded in a graphite matrix. The best spatial and temporal representation of the feedback effect is obtained from an accurate approximation of the fuel temperature. Most accident scenarios in HTRs are characterized by large time constants and slow changes in the fuel and moderator temperature fields. In these situations a meso-scale, pebble and compact scale, solution provides a good approximation of the fuel temperature. Micro-scale models are necessary in order to obtain accurate predictions in faster transients or when parameters internal to the TRISO are needed. Since these coated particles constitute one of the fundamental design barriers for the release of fission products, it becomes important to understand the transient behavior inside this containment system. An explicit TRISO fuel temperature model named THETRIS has been developed and incorporated into the CYNOD-THERMIX-KONVEK suite of coupled codes. The code includes gas release models that provide a simple predictive capability of the internal pressure during transients. The new model yields similar results to those obtained with other micro-scale fuel models, but with the added capability to analyze gas release, internal pressure buildup, and effects of a gap in the TRISO. The analyses show the instances when the micro-scale models improve the predictions of the fuel temperature and Doppler feedback. In addition, a sensitivity study of the potential effects on the transient behavior of high-temperature reactors due to the presence of a gap is included. Although the formation of a gap occurs under special conditions, its consequences on the dynamic behavior of the reactor can cause unexpected responses during fast transients. Nevertheless, the strong Doppler feedback forces the reactor to quickly stabilize.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Structure and magnetism in strained Ge{sub 1-x-y}Sn{sub x}Mn{sub y} films grown on Ge(001) by low temperature molecular beam epitaxy

In this letter, we study the structural and magnetic properties of Ge{sub 1-x-y}Sn{sub x}Mn{sub y} films grown on Ge(001) by low temperature molecular beam epitaxy using X-ray diffraction, high resolution transmission electron microscopy, and superconducting quantum interference device. Like in Mn doped Ge films, Mn atoms diffuse during the growth and aggregate into vertically aligned Mn-rich nanocolumns of a few nanometers in diameter. Transmission electron microscopy observations in plane view clearly indicate that the Sn incorporation is not uniform with concentration in Mn rich vertical nanocolumns lower than the detection limit of electron energy loss spectroscopy. The matrix exhibits a GeSn solid solution while there is a Sn-rich GeSn shell around GeMn nanocolumns. The magnetization in Ge{sub 1-x-y}Sn{sub x}Mn{sub y} layers is higher than in Ge{sub 1-x}Mn{sub x} films. This magnetic moment enhancement in Ge{sub 1-x-y}Sn{sub x}Mn{sub y} is probably related to the modification of the electronic structure of Mn atoms in the nanocolumns by the Sn-rich shell, which is formed around the nanocolumns.

36 MATERIALS SCIENCE↗

Application of multiplexed ion mobility spectrometry towards the identification of host protein signatures of treatment effect in pulmonary tuberculosis

Rationale: The monitoring of TB treatments in clinical practice and clinical trials relies on traditional sputum-based culture status indicators at specific time points. Accurate, predictive, blood-based protein markers would provide a simpler and more informative view of patient health and response to treatment. Objective: We utilized sensitive, high throughput multiplexed ion mobility-mass spectrometry (IM-MS) to characterize the serum proteome of TB patients at the start of and at 8 weeks of rifamycin-based treatment. We sought to identify treatment specific signatures within patients as well as correlate the proteome signatures to various clinical markers of treatment efficacy. Methods: Serum samples were collected from 289 subjects enrolled in CDC TB Trials Consortium Study 29 at time of enrollment and at the end of the intensive phase (after 40 doses of TB treatment). Serum proteins were immunoafinity-depleted of high abundant components, digested to peptides and analyzed for data acquisition utilizing a unique liquid chromatography IM-MS platform (LC-IM-MS). Linear mixed models were utilized to identify serum protein changes in the host response to antibiotic treatment as well as correlations with culture status end points. Results: A total of 10,137 peptides corresponding to 872 proteins were identified, quantified, and used for statistical analysis across the longitudinal patient cohort. In response to TB treatment, 244 proteins were sig- ni?cantly altered. Pathway/network comparisons helped visualize the interconnected proteins, identifying up regulated (lipid transport, coagulation cascade, endopeptidase activity) and down regulated (acute phase) processes and pathways in addition to other cross regulated networks (inflammation, cell adhesion, extracellular matrix). Detection of possible lung injury serum proteins such as HPSE, significantly downregulated upon treatment. Analyses of microbiologic data over time identified a core set of serum proteins (TTHY, AFAM, CRP, RET4, SAA1, PGRP2) which change in response to treatment and also strongly correlate with culture status. A similar set of proteins at baseline were found to be predictive of week 6 and 8 culture status. Conclusion: A comprehensive host serum protein dataset reflective of TB treatment effect is defined. A repeating set of serum proteins (TTHY, AFAM, CRP, RET4, SAA1, PGRP2, among others) were found to change significantly in response to treatment, to strongly correlate with culture status, and at baseline to be predictive of future culture conversion. If validated in cohorts with long term follow-up to capture failure and relapse of TB, these protein markers could be developed for monitoring of treatment in clinical trials and in patient care.

Kedia, Komal↗

Improvement of the prediction of surface ozone concentration over conterminous U.S. by a computationally efficient second-order Rosenbrock solver in CAM4-Chem

The global chemistry-climate model (CAM4-Chem) overestimates the surface ozone concentration over the conterminous U.S. (CONUS). Reasons for this positive bias include emission, meteorology, chemical mechanism, and solver. In this study, we explore the last possibility by examining the sensitivity to the numerical methods for solving the chemistry equations. A second-order Rosenbrock (ROS-2) solver is implemented in CAM4-Chem to examine its influence on the surface ozone concentration and the computational performance of the chemistry program. Results show that under the same time step size (1800 s), statistically significant reduction of positive bias is achieved by the ROS-2 solver. The improvement is as large as 5.2 ppb in Eastern U.S. during summer season. The ROS-2 solver is shown to reduce the positive bias in Europe and Asia as well, indicating the lower surface ozone concentration over the CONUS predicted by the ROS-2 solver is not a trade-off consequence with increasing the ozone concentration at other global regions. In addition, by refining the time step size to 180 s, the first-order implicit solver does not provide statistically significant improvement of surface ozone concentration. It reveals that the better prediction from the ROS-2 solver is not only due to its accuracy but also due to its suitability for stiff chemistry equations. As an added benefit, the computation cost of the ROS-2 solver is almost half of first-order implicit solver. The improved computational efficiency of the ROS-2 solver is due to the reuse of the Jacobian matrix and lower upper (LU) factorization during its multistage calculation.

54 ENVIRONMENTAL SCIENCES↗

Multiscale X-ray phase contrast imaging of human cartilage for investigating osteoarthritis formation

The evolution of cartilage degeneration is still not fully understood, partly due to its thinness, low radio-opacity and therefore lack of adequately resolving imaging techniques. X-ray phase-contrast imaging (X-PCI) offers increased sensitivity with respect to standard radiography and CT allowing an enhanced visibility of adjoining, low density structures with an almost histological image resolution. This study examined the feasibility of X-PCI for high-resolution (sub-) micrometer analysis of different stages in tissue degeneration of human cartilage samples and compare it to histology and transmission electron microscopy. Ten 10%-formalin preserved healthy and moderately degenerated osteochondral samples, post-mortem extracted from human knee joints, were examined using four different X-PCI tomographic set-ups using synchrotron radiation the European Synchrotron Radiation Facility (France) and the Swiss Light Source (Switzerland). Volumetric datasets were acquired with voxel sizes between 0.7 × 0.7 × 0.7 and 0.1 × 0.1 × 0.1 µm 3 . Data were reconstructed by a filtered back-projection algorithm, post-processed by ImageJ, the WEKA machine learning pixel classification tool and VGStudio max. For correlation, osteochondral samples were processed for histology and transmission electron microscopy. X-PCI provides a three-dimensional visualization of healthy and moderately degenerated cartilage samples down to a (sub-)cellular level with good correlation to histologic and transmission electron microscopy images. X-PCI is able to resolve the three layers and the architectural organization of cartilage including changes in chondrocyte cell morphology, chondrocyte subgroup distribution and (re-)organization as well as its subtle matrix structures. X-PCI captures comprehensive cartilage tissue transformation in its environment and might serve as a tissue-preserving, staining-free and volumetric virtual histology tool for examining and chronicling cartilage behavior in basic research/laboratory experiments of cartilage disease evolution.

3D analysis↗

The Myth of Fungible FTE: A Quantitative Assessment of Matrixed Resource Allocation

Matrix organizations allow scientific facilities to share specialized personnel across projects, operations, maintenance, and strategic initiatives. Nominal staffing allocations, however, may not capture the schedule consequences of fragmented individual commitments, limited access to specialist groups, and intermittent availability of key decision makers. We developed a stochas- tic, daily-time-step simulation of a hypothetical medium-sized accelerator-facility project com- prising sequential phases and parallel tasks. Each task requires role-specific work measured in FTE-days. Ordinary personnel may be unavailable because they contribute concurrently to other institutional activities, while designated key roles have independently specified daily un- availability probabilities. An organization-wide priority factor scales the number of people from each functional group who can effectively contribute to the project. It is interpreted as a composite proxy for project access and workforce fragmentation across competing commit- ments. We examined project completion time as a function of this factor and Project Lead unavailability using 100 Monte Carlo runs per condition. Increasing priority factor from 0.1 to 1.0 reduced median completion time from 1708.5 days (interquartile range 1681.5–1735.25) to 390 days (interquartile range 379–399). At priority factor = 0.1, increasing Project Lead unavailability from 0.5 to 0.9 increased median completion time from 1713.5 days (interquartile range 1691–1733.25) to 4,417 days (interquartile range 4271.75–4550.5). The model quantifies the commonly expected sensitivity of project schedules to fragmented resource commitments and limited coordination availability. Within this model, the results also indicate a possible threshold regime in which small increases in workforce availability yield only modest sched- ule improvements until sufficient capacity becomes accessible, after which project performance improves sharply. With further validation and calibration, this quantitative framework could support resource-allocation decisions during initial project planning and subsequent schedule rebaselining.

Bai, Mei [SLAC National Accelerator Laboratory (SL↗

Optimizing photovoltaic performance in CuInS 2 and CdS quantum dot-sensitized solar cells by using an agar-based gel polymer electrolyte

Quantum dot-sensitized solar cells (QDSSCs) offer new opportunities to address the clean energy challenge, being one of the top candidates for third generation photovoltaics. Like dye-sensitized solar cells (DSSCs), QDSSCs normally use liquid electrolytes that suffer from issues such as evaporation or leakage. In this study a gel polysulfide electrolyte was prepared containing a natural polymer, agar, and was used as a quasi-solid-state electrolyte in solar cells to replace the conventional liquid electrolytes. This gel electrolyte shows almost the same conductivity as the liquid one. The solar cells were fabricated using CuInS 2 quantum dots (QDs), previously synthesized, deposited on TiO 2 photoanodes by electrophoretic deposition (EPD). CdS was deposited on TiO 2 by successive ionic layer adsorption and reaction (SILAR). Reduced graphene oxide (RGO)–Cu 2 S, brass, and thin film CuxS were used as counter electrodes. Compared to a liquid polysulfide water based electrolyte, solar cells based on CuInS 2 and CdS using gel polymer electrolyte (GPE) exhibit greater incident photon to current conversion efficiency (IPCE = 51.7% at 520 nm and 72.7% at 440 nm), photocurrent density (J sc = 10.75 and 13.51 mA cm -2 ), and power conversion efficiency (η = 2.97 and 2.98%) while exhibiting significantly enhanced stability. The solar cells employing the agar-based gel polymeric electrolyte are about a factor of 0.20 more stable than using a liquid electrolyte. The higher photovoltaic performance is due to the good conductivity and high wettability as well as the superior permeation capability of the gel electrolyte into the mesoporous matrix of a TiO 2 film

14 SOLAR ENERGY↗

Measurements of B to V(Gamma) Decays

The standard model has been highly successful at describing current experimental data. However, extensions of the standard model predict particles that have masses at energy scales that are above the electroweak scale. The flavor-changing neutral current processes of the B meson are sensitive to the influences of these new physics contributions. These processes proceed through loop diagrams, thus allowing new physics to enter at the same order as the standard model. New physics may contribute to the enhancement or suppression of rate asymmetries or the decay rates of these processes. The transition B {yields} V{gamma} (V = K*(892), {rho}(770), {omega}(782), {phi}(1020)) represents radiative decays of the B meson that proceed through penguin processes. Hadronic uncertainties limit the theoretical accuracy of the prediction of the branching fractions. However, uncertainties, both theoretical and experimental, are much reduced when considering quantities involving ratios of branching fractions, such as CP or isospin asymmetries. The most dominant exclusive radiative b {yields} s transition is B {yields} K*{gamma}. We present the best measurements of the branching fractions, direct CP, and isospin asymmetries of B {yields} K*{gamma}. The analogous b {yields} d transitions are B {yields} {rho}{gamma} and B {yields} {omega}{gamma}, which are suppressed by a factor of |V{sub td}/V{sub ts}|{sup 2} {approx} 0.04 relative to B {yields} K*{gamma}. A measurement of the branching fractions and isospin asymmetry of B{sup +} {yields} {rho}{sup +}{gamma} and B{sup 0} {yields} {rho}{sup 0}{gamma}, as well as a search for B {yields} {omega}{gamma}, are also given. These measurements are combined to calculate the ratio of CKM matrix elements |V{sub td}/V{sub ts}|, which corresponds to the length of one side of the unitary triangle. Finally, we present a search for the penguin annihilation process B {yields}{phi}{gamma}. We use a sample of 383 million B{bar B} events collected with the BABAR detector at the PEP-II asymmetric-energy B factory for the analysis of B {yields} K*{gamma}. We measure the branching fractions {Beta}(B{sup 0} {yields} K*{sup 0}{gamma}) = (4.47 {+-} 0.10 {+-} 0.16) x 10{sup -5} and {Beta}(B{sup +} {yields} K*{sup +}{gamma}) = (4.22 {+-} 0.14 {+-} 0.16) x 10{sup -5}. We measure the direct CP asymmetry to be -0.033 < {Alpha}{sub CP} (B {yields} K*{gamma}) < 0.028 and the isospin asymmetry to be 0.017 < {Delta}{sub 0-} < 0.116, where the limits are determined at the 90% C.L. and include both the statistical and systematic uncertainties. Using a sample of 347 million B{bar B} events, we measure the branching fractions {Beta}(B{sup +} {yields} {rho}{sup +}{gamma}) = (1.10{sub -0.33}{sup +0.37} {+-} 0.09) x 10{sup -6} and {Beta}(B{sup 0} {yields} {rho}{sup 0}{gamma}) = (0.79{sub -0.20}{sup +0.22} {+-} 0.06) x 10{sup -6}, the isospin asymmetry {Delta} = -0.35 {+-} 0.27, and set a 90% C.L. upper limit {Beta}(B {yields} {omega}{gamma}) < 0.78 x 10{sup -6}. We also measure the isospin-averaged branching fraction {Beta}(B {yields} ({rho}/{omega}){gamma}) = (1.25{sub -0.24}{sup +0.25} {+-} 0.09) x 10{sup -6}, from which we determine |V{sub td}/V{sub ts}|= 0.200{sub -0.020}{sup +0.021} {+-} 0.015, where the first uncertainty is experimental and the second theoretical. Finally, a sample of 124 million B{bar B} events is used to set an upper limit of {Beta}(B {yields} {phi}{gamma}) < 8.5 x 10{sup -7} at the 90% C.L.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗