Search NASA⌕ Search

SEARCH · Search NASA

Results for “Stabilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Stability of non-proteinogenic amino acids to UV and gamma irradiation

Abstract Almost all living organisms on Earth utilize the same 20 amino acids to build their millions of different proteins, even though there are hundreds of amino acids naturally occurring on Earth. Although it is likely that both the prebiotic and the current environment of Earth shaped the selection of these 20 proteinogenic amino acids, environmental conditions on extraterrestrial planets and moons are known to be quite different than those on Earth. In particular, the surfaces of planets and moons such as Mars, Europa and Enceladus have a much greater flux of UV and gamma radiation impacting their surface than that of Earth. Thus, if life were to have evolved extraterrestrially, a different lexicon of amino acids may have been selected due to different environmental pressures, such as higher radiation exposure. One fundamental property an amino acid must have in order to be of use to the evolution of life is relative stability. Therefore, we studied the stability of three different proteinogenic amino acids (tyrosine, phenylalanine and tryptophan) as compared with 20 non-proteinogenic amino acids that were structurally similar to the aromatic proteinogenic amino acids, following ultraviolet (UV) light (254, 302, or 365 nm) and gamma-ray irradiation. The degree of degradation of the amino acids was quantified using an ultra-high performance liquid chromatography-mass spectrometer (UPLC-MS). The result showed that many non-proteinogenic amino acids had either equal or increased stability to certain radiation wavelengths as compared with their proteinogenic counterparts, with fluorinated phenylalanine and tryptophan derivatives, in particular, exhibiting enhanced stability as compared with proteinogenic phenylalanine and tryptophan amino acids following gamma and select UV irradiation.

Astronomy & Astrophysics↗

Kinetic versus Thermodynamic Stability of LLZO in Contact with Lithium Metal

Li 7 La 3 Zr 2 O 12 (LLZO) garnet-based oxides are a promising class of solid electrolytes used as the separator in all-solid-state batteries (ASSBs). While LLZO is considered to have a wide electrochemical stability window, its intrinsic stability in contact with lithium metal is not sufficiently well understood, and there is still a debate on the key question of whether LLZO does or does not form passivation layers before and during cycling. Utilizing both in situ and operando X-ray photoelectron spectroscopy techniques, in this work we reveal the presence of a kinetic barrier to the reduction of LLZO by Li metal, with the extent of oxygen-deficient interphase (ODI) formation depending sensitively on the energetics of Li metal arriving at the Li vertical bar LLZO interface. Despite the clear presence of a kinetic barrier to reduction, the electrochemical response of the Li vertical bar LLZO interface is unchanged by the presence of the ODI, indicating that ODI formation during electrochemical cycling does not hinder charge transfer across the Li vertical bar LLZO interface. Overall, these results reveal that the reactivity of LLZO with Li metal depends not only on the material properties of the adjoining phases (i.e., surface purity and active contact) and their resulting thermodynamic stability but also on the energy input at the interface and the resulting reaction kinetics. Furthermore, the presence of a kinetic barrier to reduction highlights the additional complexities governing the reactivity of solid-state interfaces in ASSBs and underscores the importance of operando characterization of interfacial stability to design more robust, high-performance protection strategies for solid electrolytes in contact with reactive electrodes.

25 ENERGY STORAGE↗

Interplay between Intrinsic Thermal Stability and Expansion Properties of Functionalized UiO-67 Metal–Organic Frameworks

The UiO family of metal-organic frameworks (MOFs) has been extensively studied for several applications owing to their high stability rendered by their robust secondary building units. The efficient design and use of these materials require a fundamental understanding of their thermal stability and its impact on chemical and structural functionality. In this work, we provide a detailed characterization of the intrinsic thermal behavior of the UiO-67 and functional analogues, UiO-67-NH 2 and UiO-67-CH 3 . Using in situ temperature-programmed X-ray diffraction, we find that distortion of the carboxylate group on the organic linker leads to negative thermal expansion (NTE) of the UiO-67 MOFs during heating. This NTE behavior is correlated with rich and reversible thermal changes observed in the MOF infrared spectral signature as samples are heated to the sample activation temperature (473 K). We find that in the absence of oxygen, activated UiO-67 samples show higher thermal stability compared to ambient or inert environments, with temperature-programmed desorption revealing an overall stability trend: UiO-67 > UiO-67- CH 3 > UiO-67-NH 2 . Two stages of change are observed during thermal treatment above 473 K, which are directly related to deformation of the inorganic node and the isotropic NTE behavior of these materials. Ultimately, these results provide a real-time interpretation of the fundamental thermoresponsive behavior of UiO-67 MOFs and offer a foundation for accurate interpretation of MOF interactions with guest molecules and their temperature dependence.

36 MATERIALS SCIENCE↗

Acid Gas Stability of Zeolitic Imidazolate Frameworks: Generalized Kinetic and Thermodynamic Characteristics

Here, acid gases such as SO 2 and CO 2 are present in many environments in which the use of nanoporous metal-organic frameworks (MOFs) is envisaged. Among metal-organic frameworks, zeolitic imidazolate frameworks (ZIFs) have been extensively explored as membranes or adsorbents. However, there is little systematic knowledge of the effects of acid gas exposure on the structure of ZIFs, in particular the mechanistic aspects of ZIF degradation by acid gases as well as the effects of ZIF crystal topology and linker composition on their stability. Here we present a generalized and quantitative investigation of the kinetic and thermodynamic acid gas stability of a diverse range of ZIF materials. The stability of 16 ZIFs (of SOD, RHO, ANA, and GME topologies) under different environments – humid air, liquid water, and acid gases CO 2 and SO 2 (dry, humid, and aqueous) – are investigated by a suite of experimental and computational methods. The kinetics of ZIF degradation under exposure to humid SO 2 is studied in detail, and effective rate constants for acid gas degradation of ZIFs are reported for the first time. Remarkably, the kinetics of degradation of the diverse ZIFs correlate strongly with the linker pKa and ZIF water adsorption in a manner contrary to that expected from previous predictions in the literature. Furthermore, we find that the material ZIF-71 (RHO topology) shows much higher stability relative to the other ZIFs in humid SO 2 and CO 2 environments.

36 MATERIALS SCIENCE↗

Electronic and Polar Properties of Vanadate Compounds Stabilized by Epitaxial Strain

Recent experimental and computational studies have demonstrated pressure and epitaxial stabilization of polar PbVO 3 phases with perovskite-derivative crystal structures. In this study, we demonstrate, by density functional theory (DFT) calculations, the stability of similar perovskite-derivative structures in the KVO 3 and NaVO 3 systems when subjected to compressive biaxial strain. The electronic structure and polar properties of these compounds are computed as a function of biaxial strain, and the results are compared to those obtained for experimentally observed PbVO 3 structures. It is demonstrated that the substitution of Pb with monovalent K or Na cations increases the strength of the vanadyl bond due to the removal of the spatially extended Pb 6p states. Both KVO 3 and NaVO 3 exhibit epitaxially stabilized perovskite-derivative phases having large polarizations and only small total energy increases relative to their unstrained bulk structures. The calculated epitaxial phase diagram for KVO 3 predicts a strain-energy driving force for a phase separation from ~% to 1.5% misfit strain into a polar Cm phase, having square-pyramidal coordination of the B-site, and a paraelectric Pbcm phase, having tetrahedral coordination of the B-site. The results show that strain-stabilized polar vanadate compounds may occur for other compositions in addition to PbVO 3 and that changes in the A-site species can be used to tune bonding, structure, and functional properties in these systems.

36 MATERIALS SCIENCE↗

Evaluating Autoxidation Radical Scavengers and Additives to Enhance Aminopolymer Sorbent Stability

Solid amine sorbents have shown promise in the removal of ultradilute CO 2 from the atmosphere. Despite being a promising candidate material type for this application, these sorbents are prone to degradation during long-term exposure to environmental components such as CO 2 , O 2 , and H 2 O, with amine oxidation being a particularly challenging problem. In this study, we investigate the potency of different radical scavengers and additives in mitigating the degradation of a model poly- (ethylenimine) (PEI)/Al 2 O 3 sorbent under direct air capture (DAC)-relevant conditions. The results reveal that a 4,4′-bis(α,α- dimethylbenzyl)diphenylamine (BDDPA)-incorporated PEI/Al 2 O 3 sorbent showed the most resistance toward oxidative degradation at varying exposure times and BDDPA loadings under CO 2 -free air (21% O 2 /balance N 2 ) at 120 °C. Interestingly, under humid (∼43% relative humidity (RH) at 26 °C) and dry 0.04% CO 2 -air, the BDDPA/PEI/Al 2 O 3 sorbent showed enhanced sorbent stability both at 70 and 120 °C after 4.5 h of exposure. Under humid CO 2 -free air, at 120 °C, the antioxidant performance slightly declined (in comparison to the dry CO 2 -free air condition) but displayed a much higher stability than the pristine sorbent. Overall, the ability of BDDPA to inhibit sorbent degradation under dry and humid, CO 2 -free and CO 2 -containing (0.04%) air at intermediate (70 °C) and elevated (120 °C) temperatures is promising in prolonging sorbent stability and underscores the importance of performing accelerated oxidation studies in the presence of all species that are expected to be present in DAC processes to identify suitable stabilization treatments for sorbent materials.

36 MATERIALS SCIENCE↗

Polymer Architecture: Does it Influence Shear Stability?

Hyperbranched and linear poly(alkyl methacrylate)s with and without polycaprolactone grafts were designed and prepared via a core-first strategy, then evaluated with respect to their rheology and shear stability performance. The focus of this work was to study the effect of architecture on mechanical shear stability, as it relates to lubricant performance. The polymers were prepared from functionalized macroinitiators subsequently subjected to ATRP/ARGET-ATRP conditions with dodecyl methacrylate and 2-ethylhexyl methacrylate mixtures. As expected, most compounds displayed an increased viscosity index along with increasing molecular weights. The inclusion of polycaprolactone appears to have enhanced the viscosity index in select samples. Although the hyperbranched polymers studied here varied in the number of arms from about twenty to one (linear), the data presented supports the empirical understanding that shear stability is mainly influenced by molecular weight and not architecture or topology. The polymers with caprolactone blocks demonstrated a positive effect on the shear stability, as in possessing the lowest viscosity loss values which were four times lower than the other compounds included in this study as well as the benchmark.

Cosimbescu, Lelia↗

Stabilization of Dinuclear Rhodium and Iridium Clusters on Layered Titanate and Niobate Supports

Atomically dispersed organometallic clusters can provide well-defined nuclearity of active sites for both fundamental studies as well as new regimes of activity and selectivity in chemical transformations. More recently, dinuclear clusters adsorbed onto solid surfaces have shown novel catalytic properties resulting from the synergistic effect of two metal centers to anchor different reactant species. Difficulty in synthesizing, stabilizing, and characterizing isolated atoms and clusters without agglomeration challenges allocating catalytic performance to atomic structure. Here, we explore the stability of dinuclear rhodium and iridium clusters adsorbed onto layered titanate and niobate supports using molecular precursors. Both systems maintain their nuclearity when Statistical analysis of HAADF-STEM images revealed that rhodium and iridium dimers had mean cluster-to-cluster distances very similar to what is expected from a random distribution of atoms over a large area, indicating that they are dispersed without aggregation. The stability of dinuclear rhodium clusters supported on titanate nanosheets was also investigated by X-ray absorption fine structure (EXAFS), DRIFTS, and first-principles calculations. Both X-ray absorption spectroscopy and HAADF-STEM simulations, guided by density functional theory (DFT)-optimized structure models, suggested that rhodium dimers adsorb onto the nanosheets in an end-on binding mode that is stable up to 100 degrees C under reducing conditions. Finally, this study highlights that crystalline nanosheets derived from layered metal oxides can be used as model supports to selectively stabilize dinuclear clusters, which could have implications for heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Basis of Duplex Thermodynamic Stability and Enhanced Nuclease Resistance of 5'- C -Methyl Pyrimidine-Modified Oligonucleotides

Although judicious use of chemical modifications has contributed to the success of nucleic acid therapeutics, poor systemic stability remains a major hurdle. The introduction of functional groups around the phosphate backbone can enhance the nuclease resistance of oligonucleotides (ONs). In this paper, we report the synthesis of enantiomerically pure ( R )- and ( S )-5'- C -methyl (C5'-Me) substituted nucleosides and their incorporation into ONs. These modifications generally resulted in a decrease in thermal stability of oligonucleotide (ON) duplexes in a manner dependent on the stereoconfiguration at C5' with greater destabilization characteristic of ( R )-epimers. Enhanced stability against snake venom phosphodiesterase resulted from modification of the 3'-end of an ON with either ( R )- or ( S )-C5'-Me nucleotides. The ( S )-isomers with different 2'-substituents provided greater resistance against 3'-exonucleases than the corresponding ( R )-isomers. Crystal structure analyses of RNA octamers with ( R )- or ( S )-5'- C -methyl-2'-deoxy-2'-fluorouridine [( R )- or ( S )-C5'-Me-2'-FU, respectively] revealed that the stereochemical orientation of the C5'-Me and the steric effects that emanate from the alkyl substitution are the dominant determinants of thermal stability and are likely molecular origins of resistance against nucleases. X-ray and NMR structural analyses showed that the ( S )-C5'-Me epimers are spatially and structurally more similar to their natural 5' nonmethylated counterparts than the corresponding ( R )-epimers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficacy of Stabilizing Calcium Battery Electrolytes through Salt-Directed Coordination Change

Achieving practical, high-energy-density calcium batteries requires controlling the stability of Ca 2+ electrolytes during calcium metal cycling. Because of the highly reactive nature of calcium, most typical electrolyte constituents are unstable, leading to electrode passivation and low Coulombic efficiency. Among various commercially available salts, calcium bis(trifluoromethylsulfonyl)imide (Ca(TFSI) 2 ) is attractive because of its oxidative stability and high solubility in a variety of solvents. However, this salt does not allow for calcium metal plating, and it has been proposed that TFSI – instability induced by Ca 2+ coordination is to blame. In this work, we test the ability of strongly coordinating Ca 2+ cosalts such as halides and borohydrides to displace TFSI – from the first coordination shell of Ca 2+ and thereby stabilize TFSI-based electrolytes to enable calcium plating. Through spectroscopic analysis, we find that the effectiveness of these cosalts at displacing the TFSI – anion is dependent on the solvent’s coordination strength toward Ca 2+ . Surprisingly, electrochemical calcium deposition behavior is not correlated to the population of bound or free TFSI – . Instead, the nature of the coordination interaction between Ca 2+ and the cosalt anion is more important for determining stability. Our findings indicate that TFSI – anions are inherently unstable during calcium deposition even in the nominally free state. Furthermore, strategies aimed at eliminating the interactions of these anions with the electrode surface via interface/interphase design are required.

25 ENERGY STORAGE↗

Calorimetric Determination of Thermodynamic Stability of MAX and MXene Phases

MXenes are layered two dimensional materials with exciting properties useful to a wide range of energy applications. They are derived from ceramics (MAX phases) by leaching and their properties reflect their resulting complex compositions which include intercalating cations and anions and water. Their thermodynamic stability is likely linked to these functional groups but has not yet been addressed by quantitative experimental measurements. We report enthalpies of formation from the elements at 25 °C measured using high temperature oxide melt solution calorimetry for a layered Ti-Al-C MAX phase, and the corresponding Ti-C based MXene. The thermodynamic stability of the Ti 3 C 2 T x MXene (Tx stands for anionic surface moieties, and intercalated cations) was assessed by calculating the enthalpy of reaction of the MAX phase (ideal composition Ti 3 AlC 2 ) to form MXene, The very exothermic enthalpy of reaction confirms the stability of MXene in an aqueous environment. The surface terminations (O, OH and F) and cations (Li) chemisorbed on the surface and intercalated in the interlayers play a major role in the thermodynamic stabilization of MXene. These findings help to understand and potentially improve properties and performance by characterizing the energetics of species binding to MXene surfaces during synthesis and in energy storage, water desalination and other applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elucidating Factors Controlling Long-Term Stability of Radical Anions for Negative Charge Storage in Nonaqueous Redox Flow Batteries

Radical anions of electrochemically reduced compounds (anolytes) have been suggested for storage of negative charge in nonaqueous redox flow batteries. The lower the redox potential of the anolyte molecule, the higher is the stored energy density. However, the stability of the radical ions frequently suffers as their redox potentials become extreme, and there is a compromise between the energy density and the chemical stability in the active form. In this paper, we scrutinize this trade-off using one such “extreme,” the heterocyclic anolyte 2,1,3-benzothiadiazole, BzNSN, by adjusting the redox potential of BzNSN via installed electron-donating and electron-withdrawing groups. We show that the stability of the radical anion strongly depends on the degree of ion pairing in solution, with the worst being for the contact lithium ion pairs. For BzNSN derivatives, there is a strong correlation between the lifetime of the radical anion and the redox potential. The root cause appears to be the proton transfer from the solvent (acetonitrile) to the radical anion, which is concerted with the dimerization of the solvent molecules. These interactions cause the radical anion to become unstable even though the redox couple falls well within the electrochemical stability window of the solvent. Steering this redox potential toward the middle of this window using electron-withdrawing groups did not pay off as it opened additional decomposition pathways. Finally, our study, therefore, suggests that there can be natural limitations to the energy density that is realistically achieved using neutral, closed-shell anolyte molecules for charge storage in the redox flow cells.

25 ENERGY STORAGE↗

Coinage Metal–Sulfur Complexes: Stability on Metal(111) Surfaces and in the Gas Phase

We introduce a comprehensive theoretical assessment at the level of density functional theory (DFT) of the stability of various coinage metal–sulfur complexes, both in the gas phase and also for the complexes adsorbed on the (111) surface of the same coinage metal. Our primary interest lies in the latter where earlier scanning tunneling microscopy (STM) experiments were interpreted to imply the existence of adsorbed S-decorated metal trimers, sometimes as a component of more complex adlayer structures. Recent STM studies at 5 K directly observed other isolated adsorbed metal–sulfur complexes. For these adsorbed species, we measure various aspects of their energetics including a natural measure of stability corresponding to their formation energy from sulfur adsorbed on terraces and from metal atoms that are in thermal equilibrium with the substrate. From this perspective, our DFT analysis shows that all of Ag 2 S 3 , Ag 3 S 3 , and many larger complexes on Ag(111) are strongly stable, Cu 2 S 3 is stable, and some larger complexes are marginally stable on Cu(111), but only Au 4 S 4 on Au(111) is stable. Results are consistent with STM observations for Cu(111) and Ag(111) surfaces but appear to deviate slightly for Au(111). A systematic analysis relating stability in the gas phase with that of adsorbed species is achieved within the framework of Hess’s law. This analysis also unambiguously elucidates various energetic contributions to stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-Principles Characterization of Surface Phonons of Halide Perovskite CsPbI 3 and Their Role in Stabilization

The stability of halide perovskites has been a long-standing issue for their real-world application. Approaches to improve stability include nanostructuring, dimensionality reduction, and strain engineering, where surfaces play an important role in the formation of a stable structure. To understand the mechanism we compute the lattice dynamics of the surface of CsPbI 3 using density functional theory. We demonstrate, for the first time, that CsPbI 3 crystals exhibit surface phonons that are localized on the outermost layers of the slabs, and we perform a complete symmetry characterization including an identification of the Raman/IR active modes. These surface phonons are present in the optically active cubic phase but are absent in the optically inactive "yellow" phase. Furthermore, we show that the surface suppresses bulk instabilities by hardening soft modes of the bulk cubic phase, resulting in phase stabilization and quenching of dynamical disorder. Finally, this study is fundamental for understanding the structural behavior of halide perovskite materials with high surface area-to-volume ratios, and for guiding stabilization strategies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stability limits and defect dynamics in Ag nanoparticles probed by Bragg coherent diffractive imaging

Dissolution is critical to nanomaterial stability, especially for partially dealloyed nanoparticle catalysts. Unfortunately, highly active catalysts are often not stable in their reactive environments, preventing widespread application. Thus, focusing on the structure–stability relationship at the nanoscale is crucial and will likely play an important role in meeting grand challenges. Recent advances in imaging capability have come from electron, X-ray, and other techniques but tend to be limited to specific sample environments and/or two-dimensional images. Here, we report investigations into the defect-stability relationship of silver nanoparticles to voltage-induced electrochemical dissolution imaged in situ in three dimensional detail by Bragg coherent diffractive imaging. We first determine the average dissolution kinetics by stationary probe rotating disk electrode in combination with inductively coupled plasma mass spectrometry, which allows in situ measurement of Ag+ ion formation. We then observe the dissolution and redeposition processes in single nanocrystals, providing unique insight about the role of surface strain, defects, and their coupling to the dissolution chemistry. Finally, the methods developed and the knowledge gained go well beyond a “simple” silver electrochemistry and are applicable to all electrocatalytic reactions where functional links between activity and stability are controlled by structure and defect dynamics.

36 MATERIALS SCIENCE↗

Nanorod Suprastructures from a Ternary Graphene Oxide–Polymer–CsPbX 3 Perovskite Nanocrystal Composite That Display High Environmental Stability

Despite the exceptional optoelectronic characteristics of the emergent perovskite nanocrystals, the ionic nature greatly limits their stability, and thus restricts their potential applications. Here we have adapted a self-assembly strategy to access a rarely reported nanorod suprastructure that provide excellent encapsulation of perovskite nanocrystals by polymer-grafted graphene oxide layers. Polyacrylic acid-grafted graphene oxide (GO-g-PAA) was used as a surface ligand during the synthesis of the CsPbX 3 perovskite nanocrystals (NCs), yielding particles (5-12 nm) with tunable halide compositions that were homogeneously embedded in the GO-g-PAA matrix. The resulting NC-GO-g-PAA exhibits a higher photoluminescence quantum yield than previously reported encapsulated NCs while maintaining an easily tunable bandgap, allowing for emission spanning the visible spectrum. The NC-GO-g-PAA hybrid further self-assembles into well-defined nanorods upon solvent treatment. The resulting nanorod morphology imparts extraordinary chemical stability toward protic solvents such as methanol and water and much enhanced thermal stability. Finally, the introduction of barrier layers by embedding the perovskite NCs in the GO-g-PAA matrix, together with its unique assembly into nanorods, provides a novel strategy to afford robust perovskite emissive materials with environmental stability that may meet or exceed the requirement for optoelectronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Machine-Learning-Driven Discovery of Water Splitting BaFe 2 O 4 and Human-in-the-Loop Improvement via Al-Substitution for Increased Thermal Stability

Thermochemical hydrogen (TCH) production offers a promising method for converting thermal energy into hydrogen fuel through heat-driven redox cycles of metal oxides. Here, in this work a defect graph neural network (dGNN) was used to predict oxygen vacancy formation energies ΔH V O combined with Materials Project predictions of oxygen chemical potential stability to screen candidate oxides via high-throughput database analysis. BaFe 2 O 4 was identified as a promising material for experimental validation based on its predicted ΔH V O , oxygen chemical potential stability range, and potential for tunable substitutions to improve thermal properties. Experimental validation using thermogravimetric analysis (TGA), stagnation flow reactor (SFR), X-ray diffraction (XRD), and electron microscopy confirmed positive water-splitting behavior but also revealed limitations in thermal stability under aggressive reduction conditions. To address this, a human-in-the-loop modification strategy was employed introducing Al substitution in BaFe 2–x Al x O 4 ; this modification improves thermal stability, alters the crystal structure and enhances overall performance. These results demonstrate a combined computational and experimental workflow in which machine learning accelerates identification of promising candidates, while targeted experimental design enables optimization of functional performance. This approach advances the development of robust, cost-effective TCH materials and highlights the importance of integrating data-driven discovery with human-guided materials design in paving the way for scalable hydrogen production technologies.

organic↗

Understanding the Stability of Etched or Platinized p-GaInP Photocathodes for Solar-Driven H 2 Evolution

The long-term stability in acidic or alkaline aqueous electrolytes of p-Ga 0.52 In 0.48 P photocathodes, with a band gap of ~1.8 eV, for the solar-driven hydrogen-evolution reaction (HER) has been evaluated from a thermodynamic, kinetic, and mechanistic perspective. At either pH 0 or pH 14, etched p-GaInP electrodes corroded cathodically under illumination and formed metallic In 0 on the photoelectrode surface. In contrast, under the same conditions, electrodeposition of Pt facilitated the HER kinetics and stabilized p-GaInP/Pt photoelectrodes against such cathodic decomposition. When held at 0 V versus the reversible hydrogen electrode, p-GaInP/Pt electrodes in either pH = 0 or pH = 14 exhibited stable current densities (J) of ~-9 mA cm -2 for hundreds of hours under simulated 1 sun illumination. During the stability tests, the current density-potential (J-E) characteristics of the p-GaInP/Pt photoelectrodes degraded due to pH-dependent changes in the surface chemistry of the photocathode. This work provides a fundamental understanding of the stability and corrosion mechanisms of p-GaInP photocathodes that constitute a promising top light absorber for tandem solar-fuel generators.

14 SOLAR ENERGY↗