Search NASA⌕ Search

SEARCH · Search NASA

Results for “State Variable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Slew-induced deformation shaping

Computed torques for pointing and tracking require compensation for slew-induced structural, forebody/aftbody, or optical train alignment deformations. Thus even if only line-of-sight variables are to be commanded, full state feedback is needed. The solution proposed is to decouple by feedforward of the line-of-sight slew dynamics into the deformation control loop. It is shown how arbitrarily few actuators are needed for such deformation shaping, at the cost of higher differentiability of the reference line-of-sight dynamics. The low-rate, single-axis case is developed in detail, and its extension to high rates and multiple axes by global feedback linearization is outlined.

Dwyer, T. A. W., III↗
NASA NTRS1990

[NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 2:] External Information Sources and aerospace R&D: The use and importance of technical reports by US aerospace engineers and scientists

This paper formulates and studies two propositions. Proposition 1 states that information that is external to the aerospace organization tends to be used less than internal sources of information; the more geographically removed the information is from the organization, the less likely it is to be used. Proposition 2 states that of the various sociometric variables assumed to influence the use of an information channel or source, perceived accessibility exerts the greatest influence. Preliminary analysis based on surveys supports Proposition 1. This analysis does not support Proposition 2, however. Evidence here indicates that reliability and relevance influence the use of an information source more than the idea of perceived accessibility.

Blados, Walter R.↗
NASA NTRS1991

Three dimensional unstructured multigrid for the Euler equations

The three dimensional Euler equations are solved on unstructured tetrahedral meshes using a multigrid strategy. The driving algorithm consists of an explicit vertex-based finite element scheme, which employs an edge-based data structure to assemble the residuals. The multigrid approach employs a sequence of independently generated coarse and fine meshes to accelerate the convergence to steady-state of the fine grid solution. Variables, residuals and corrections are passed back and forth between the various grids of the sequence using linear interpolation. The addresses and weights for interpolation are determined in a preprocessing stage using linear interpolation. The addresses and weights for interpolation are determined in a preprocessing stage using an efficient graph traversal algorithm. The preprocessing operation is shown to require a negligible fraction of the CPU time required by the overall solution procedure, while gains in overall solution efficiencies greater than an order of magnitude are demonstrated on meshes containing up to 350,000 vertices. Solutions using globally regenerated fine meshes as well as adaptively refined meshes are given.

Mavriplis, D. J.↗
NASA NTRS1991

Derivation of sequential, real-time, process-control programs

The use of weakest-precondition predicate transformers in the derivation of sequential, process-control software is discussed. Only one extension to Dijkstra's calculus for deriving ordinary sequential programs was found to be necessary: function-valued auxiliary variables. These auxiliary variables are needed for reasoning about states of a physical process that exists during program transitions.

Marzullo, Keith↗
NASA NTRS1991

Three dimensional unstructured multigrid for the Euler equations

The three-dimensional Euler equations are solved on unstructured tetrahedral meshes using a multigrid strategy. The driving algorithm consists of an explicit vertex-based finite-element scheme, which employs an edge-based data-structure to assemble the residuals. The multigrid approach employs a sequence of independently generated coarse and fine meshes to accelerate the convergence to steady-state of the fine grid solution. Variables, residuals and corrections are passed back and forth between the various grids of the sequence using linear interpolation. The addresses and weights for interpolation are determined in a preprocessing stage using an efficient graph traversal algorithm. The preprocessing operation is shown to require a negligible fraction of the CPU time required by the overall solution procedure, while gains in overall solution efficiencies greater than an order of magnitude are demonstrated on meshes containing up to 350,000 vertices. Solutions using globally regenerated fine meshes as well as adaptively refined meshes are given.

Mavriplis, D. J.↗
NASA NTRS1992

NH3 and NH2 in the coma of Comet Brorsen-Metcalf

Evidence consistent with NH3 ice in the nucleus of Comet Brorsen-Metcalf as the source of the NH2 observed in the comet coma is presented. The distribution of NH2 is symmetric and shows no evidence for jet structure at the 3-sigma significance level above background emission. An azimuthal average of the NH2 image produces an NH2 surface brightness profile for Comet Brorsen-Metcalf which yields a factor of about-10 improvement in the signal-to-noise ratio over previous 1D long-slit NH2 observations, and provides a significant constraint on the NH2 photodissociation time scale in comets. A Monte Carlo simulation of the comet coma, assuming that NH2 is the primary source of NH2, is described and compared with the observations. For an observed production rate, Q(H2O) is approximately equal to 7 x 10 exp 28 molecules/s, collisional effects on the NH3 and NH2 outflow had at most an approximately 10-percent effect on the NH2 surface brightness profile. Because Comet Brorsen-Metcalf showed no significant dust or gas production rate variability, it is argued that steady state conditions best match the comet at the time of the observations.

Tegler, Stephen C.↗
NASA NTRS1993

Kalman-Filter Estimation Of Unmeasured Output Variables

Kalman-filter "observer" algorithm used in estimating unmeasured output variables of turbofan engine. Unmeasured output variables needed along with measured output variables as feedback data to characterize state of aircraft-and-engine system for control purposes. Subsystem or processor implementing Kalman-filter algorithm incorporated into adaptive digital control system, called "performance-seeking" control system, developed to compute engine-control settings to optimize performance of aircraft under given pseudo-steady-state cruise conditions. Basic concept of algorithm not restricted to aircraft-engine application and can be extended to internal-combustion engines in land vehicles.

Gilyard, Glenn B.↗
NASA NTRS1998

Observation of Kilohertz Quasiperiodic Oscillations from the Atoll Source 4U 1702-429 by RXTE

We present results of Rossi X-Ray Timing Explorer (RXTE) observations of the atoll source 4U 1702-429 in the middle of its luminosity range. Kilohertz-range quasiperiodic oscillations (QPOS) were observed first as a narrow (FWHM approximately 7 Hz) peak near 900 Hz, and later as a pair consisting of a narrow peak in the range 625 825 Hz and a faint broad (FWHM 91 Hz) peak. When the two peaks appeared simultaneously the separation was 333 +/- 5 Hz. Six type I thermonuclear bursts were detected, of which five exhibited almost coherent oscillations near 330 Hz, which makes 4U 1702-429 only the second source to show burst oscillations very close to the kilohertz QPO separation frequency. The energy spectrum and color-color diagram indicate that the source executed variations in the range between the "island" and "lower banana" atoll states. In addition to the kilohertz variability, oscillations at approximately 10, approximately 35, and 80 Hz were also detected at various times, superimposed on a red noise continuum. The centroid of the approximately 35 Hz QPO tracks the frequency of the kilohertz oscillation when they were both present. A Lense-Thirring gravitomagnetic precession interpretation appears more plausible in this case, compared to other atoll sources with low frequency QPOs.

Markwardt, C. B.↗
NASA NTRS1998

Detailed Mid- and Far- Ultraviolet Model Spectra for Accretion Disks in Cataclysmic Binaries

We present a large grid of computed far- and mid-ultraviolet spectra (850-2000 A) of the integrated light from steady-state accretion disks in luminous cataclysmic variables. The spectra are tabulated at 0.25 A intervals with an adopted FWHM resolution of 1.0 A, so they are suitable for use with observed spectra from a variety of modern space-borne observatories. Twenty-six different combinations of white dwarf mass M(sub wd) and mass accretion rate dot-m are considered, and spectra are presented for six different disk inclinations i. The disk models are computed self-consistently in the plane-parallel approximation, assuming LTE and vertical hydrostatic equilibrium, by solving simultaneously the radiative transfer, hydrostatic equilibrium, and energy balance equations. Irradiation from external sources is neglected. Local spectra of disk annuli are computed taking into account line transitions from elements 1-28 (H through Ni). Limb darkening as well as Doppler broadening and blending of lines are taken into account in computing the integrated disk spectra. The radiative properties of the models are discussed, including the dependence of ultraviolet fluxes and colors on M(sub wd), dot-m, and i. The appearance of the disk spectra is illustrated, with regard to changes in the same three parameters. Finally, possible future improvements to the present models and spectra are discussed.

Wade, Richard A.↗
NASA NTRS1998

Multiwavelength Observations of a Dramatic High-Energy Flare in the Blazar 3C 279

The blazar 3C 279, one of the brightest identified extragalactic objects in the gamma-ray sky, underwent a large (factor of approximately 10 in amplitude) flare in gamma-rays toward the end of a 3 week pointing by Compton Gamma Ray Observatory (CGRO), in 1996 January-February. The flare peak represents the highest gamma-ray intensity ever recorded for this object. During the high state, extremely rapid gamma-ray variability was seen, including an increase of a factor of 2.6 in approximately 8 hr, which strengthens the case for relativistic beaming. Coordinated multifrequency observations were carried out with Rossi X-Ray Timing Explorer (RXTE), Advanced Satellite for Cosmology and Astrophysics (ASCA; or, Astro-D), Roentgen Satellite (ROSAT), and International Ultraviolet Explorer (IUE) and from many ground-based observatories, covering most accessible wavelengths. The well-sampled, simultaneous RXTE light curve shows an outburst of lower amplitude (factor of approximately = 3) well correlated with the gamma-ray flare without any lag larger than the temporal resolution of approximately 1 day. The optical-UV light curves, which are not well sampled during the high-energy flare, exhibit more modest variations (factor of approximately 2) and a lower degree of correlation. The flux at millimetric wavelengths was near a historical maximum during the gamma-ray flare peak, and there is a suggestion of a correlated decay. We present simultaneous spectral energy distributions of 3C 279 prior to and near to the flare peak. The gamma-rays vary by more than the square of the observed IR-optical flux change, which poses some problems for specific blazar emission models. The synchrotron self-Compton (SSC) model would require that the largest synchrotron variability occurred in the mostly unobserved submillimeter/far-infrared region. Alternatively, a large variation in the external photon field could occur over a time-scale of a few days. This occurs naturally in the "mirror" model wherein the flaring region in the jet photoionizes nearby broad emission line clouds, which, in turn, provide soft external photons that are Comptonized to gamma-ray energies.

Wehrle, A. E.↗
NASA NTRS1998

Multiwavelength Observations of a Dramatic High-Energy Flare in the Blazar 3C 279

The blazar 3C 279, one of the brightest identified extragalactic objects in the gamma-ray sky, underwent a large (factor of approx. 10 in amplitude) flare in gamma-rays toward the end of a 3 week pointing by Compton Gamma Ray Observatory (CGRO), in 1996 January-February. The flare peak represents the highest gamma-ray intensity ever recorded for this object. During the high state, extremely rapid gamma-ray variability was seen, including an increase of a factor of 2.6 in approx. 8 hrs., which strengthens the case for relativistic beaming. Coordinated multifrequency observations were carried out with Rossi X-Ray Timing Explorer (RXTE), Advanced Satellite for Cosmology and Astrophysics (ASCA; or, Astro-D), Roentgen Satellite (ROSAT), and International Ultraviolet Explorer (IUE) and from many ground-based observatories, covering most accessible wavelengths. The well-sampled, simultaneous RXTE light curve shows an outburst of lower amplitude (factor of approx. or equal to 3) well correlated with the gamma-ray flare without any lag larger than the temporal resolution of approx. 1 day. The optical-UV light curves, which are not well sampled during the high-energy flare, exhibit more modest variations (factor of approx. 2) and a lower degree of correlation. The flux at millimetric wavelengths was near a historical maximum during the gamma-ray flare peak, and there is a suggestion of a correlated decay. We present simultaneous spectral energy distributions of 3C 279 prior to and near to the flare peak. The gamma-rays vary by more than the square of the observed IR-optical flux change, which poses some problems for specific blazar emission models. The synchrotron self-Compton (SSC) model would require that the largest synchrotron variability occurred in the mostly unobserved submillimeter/far-infrared region. Alternatively, a large variation in the external photon field could occur over a time scale of a few days. This occurs naturally in the "mirror" model wherein the flaring region in the jet photoionizes nearby broad emission line clouds, which, in turn, provide soft external photons that are Comptonized to gamma-ray energies.

Wehrle, A. E.↗
NASA NTRS2000

Biocybernetic Control of Vigilance Task Parameters

The major focus of the present proposal was to examine psychophysiological variables that are related to hazardous states of awareness induced by monitoring automated systems. With the increased use of automation in today's work environment, people's roles in the work place are being redefined from that of active participant to one of passive monitor. Although the introduction of automated systems has a number of benefits, there are also a number of disadvantages regarding the worker performance. Byrne and Parasuraman (1996) have argued for the use of psychophysiological measures in both the development and the implementation of adaptive automation. While both performance based and model based adaptive automation have been studied, the use of psychophysiological measures, especially EEG, offers the advantage of real time evaluation of the state of the subject. Previous investigations of the closed-loop adaptive automation system in our laboratory, supported by NASA, have employed a compensatory tracking task which involved the use of a joystick to maintain the position of a cursor in the middle of a video screen. This research demonstrated that, in an adaptive automation, closed-loop environment, subjects perform a tracking task better under a negative, compared to a positive, feedback condition. While tracking is comparable to some aspects of flying an airplane, it does not simulate the environment found in the cockpit of modern commercial airplanes. Since a large part of the flying responsibilities in commercial airplanes is automated, the primary responsibility of pilots is to monitor the automation and to respond when the automation fails. Because failures are relatively rare, pilots often suffer from hazardous states of awareness induced by long term vigilance of the automated system. Consequently, the aim of the current study was to investigate the ability of the closed-loop, adaptive automation system in a vigilance paradigm. It is also important to note that tracking involves a continuous, though low level, motor response. Since it is not clear how such activity might affect performance of the adaptive automation system, it was thought to be important to evaluate how the system functioned when there was minimal motor output by the subjects. The current study used the closed-loop system, developed at NASA-Langley Research Center, to control the state of awareness of subjects while they performed a vigilance task. Several experiments were conducted to examine the use of EEG feedback to control a target dimension used in the task. Changes in a subject's arousal, as defined by specific EEG indexes, produced stimulus changes known to affect task performance. In addition, different electrode sites, compared to previous research, were sampled to determine the optimum configuration with regard to the following criteria: (1) task performance and (2) EEG index.

Freeman, Frederick G.↗
NASA NTRS2001

Toward a Unified Parameterization of the Boundary Layer and Moist Convection: A New Type of Mass-Flux Model - Part 1

Higher-order closure (HOC) models have been proposed for parameterization of the turbulent planetary boundary layer (PBL). HOC models must include closures for higher-order moments (e.g., fourth moments in third-order closure models), for pressure terms, and for dissipation terms. Mass-flux closure (MFC) models have been proposed for parameterization of cumulus convection and, more recently, the convective PBL. MFC models include closures for lateral mass exchanges and for pressure terms (which are usually ignored). The authors developed a new kind of model that combines HOC and MFC, which they hope will be useful for the parameterization of both the PBL and cumulus convection, in a unified framework. Such a model is particularly well suited to regimes in which the PBL turbulence and the cumulus convection are not well separated, for example, the broken stratocumulus and shallow cumulus regimes. The model makes use of an assumed joint probability distribution for the variables of interest, and the equations typically used in HOC models can be derived by integrating over the distribution. Accordingly, the model is called Assumed-Distribution Higher-Order Closure (ADHOC). The prognostic variables of ADHOC are the mean state, the second and third moments of the vertical velocity, and the vertical fluxes of other quantities of interest. All of the parameters of the distribution can be determined from the predicted moments, thereafter the joint distribution is effectively known, and so any and all moments can be constructed as needed. In this way, the usual closure problem of "higher moments" is avoided. The pressure-term parameterizations previously developed for HOC models are used to predict the convective fluxes and the moments of the vertical velocity. In companion papers, parameterizations of lateral mass exchanges and subplume-scale fluxes are presented, and then ADHOC is applied to several observationally based tropical, subtropical, and dry convective boundary layers.

Lappen, Cara-Lyn↗
NASA NTRS2005

Assimilation of MLS and OMI Ozone Data

Ozone data from Aura Microwave Limb Sounder (MLS) and Ozone Monitoring Instrument (OMI) were assimilated into the ozone model at NASA's Global Modeling and Assimilation Office (GMAO). This assimilation produces ozone fields that are superior to those from the operational GMAO assimilation of Solar Backscatter Ultraviolet (SBUV/2) instrument data. Assimilation of Aura data improves the representation of the "ozone hole" and the agreement with independent Stratospheric Aerosol and Gas Experiment (SAGE) III and ozone sonde data. Ozone in the lower stratosphere is captured better: mean state, vertical gradients, spatial and temporal variability are all improved. Inclusion of OMI and MLS data together, or separately, in the assimilation system provides a way of checking how consistent OMI and MLS data are with each other, and with the ozone model. We found that differences between OMI total ozone column data and model forecasts decrease after MLS data are assimilated. This indicates that MLS stratospheric ozone profiles are consistent with OMI total ozone columns. The evaluation of error characteristics of OMI and MLS ozone will continue as data from newer versions of retrievals becomes available. We report on the initial step in obtaining global assimilated ozone fields that combine measurements from different Aura instruments, the ozone model at the GMAO, and their respective error characteristics. We plan to use assimilated ozone fields in estimation of tropospheric ozone. We also plan to investigate impacts of assimilated ozone fields on numerical weather prediction through their use in radiative models and in the assimilation of infrared nadir radiance data from NASA's Advanced Infrared Sounder (AIRS).

Stajner, I.↗
NASA NTRS2005

AM CVn Stars: Structure and Evolution of Ultra-Short Period Interacting Binaries

This is the final report of a FUSE program to study the physics of accretion and outflows in ultra-compact, helium dominated, disk-accreting binaries. With FUSE, we observed the AM CVn binary V803 Cen, which is one of only two AM CVn systems observed by FUSE to date. V803 Cen is a short-period interacting binary in which a hydrogen-deficient white dwarf transfers mass to another white dwarf via a hot, steady-state accretion disk. Unlike other cataclysmic variables (CVs), AM CVn stars have undergone double common envelope evolution (one for each white dwarf in the binary) and so probe an alternate route of evolution in binary stars. Our goals in this project were to investigate how the structure of the accretion disk and the link between the disk and wind outflows are affected by the absence of hydrogen in the system and by the compact size of the binary and the accretion disk.

Froning, Cynthia↗
NASA NTRS2009

Improved Model of a Mercury Ring Damper

A short document discusses the general problem of mathematical modeling of the three-dimensional rotational dynamics of rigid bodies and of the use of Euler parameters to eliminate the singularities occasioned by the use of Euler angles in such modeling. The document goes on to characterize a Hamiltonian model, developed by the authors, that utilizes the Euler parameters and, hence, is suitable for use in computational simulations that involve arbitrary rotational motion. In this formulation unlike in prior Euler-parameter-based formulations, there are no algebraic constraints. This formulation includes a general potential energy function, incorporates a minimum set of momentum variables, and takes an explicit state-space form convenient for numerical implementation. Practical application of this formulation has been demonstrated by the development of a new and simplified model of the rotational motion of a rigid rotor to which is attached a partially filled mercury ring damper. Models like this one are used in guidance and control of spin-stabilized spacecraft and gyroscope-stabilized seekers in guided missiles.

Fahrenthold, Eric P.↗
NASA NTRS2011

LADEE Satellite Modeling and Simulation Development

As human activity on and around the Moon increases, so does the likelihood that our actions will have an impact on its atmosphere. The Lunar Atmosphere and Dust Environment Explorer (LADEE), a NASA satellite scheduled to launch in 2013, will orbit the Moon collecting composition, density, and time variability data to characterize the current state of the lunar atmosphere. LADEE will also test the concept of the "Modular Common Bus" spacecraft architecture, an effort to reduce both development time and cost by designing reusable, modular components for use in multiple missions with similar requirements. An important aspect of this design strategy is to both simulate the spacecraft and develop the flight code in Simulink, a block diagram-style programming language that allows easy algorithm visualization and performance testing. Before flight code can be tested, however, a realistic simulation of the satellite and its dynamics must be generated and validated. This includes all of the satellite control system components such as actuators used for force and torque generation and sensors used for inertial orientation reference. My primary responsibilities have included designing, integrating, and testing models for the LADEE thrusters, reaction wheels, star trackers, and rate gyroscopes.

Adams, Michael↗
NASA NTRS2013

BOKS 45906: a CV with an Orbital Period of 56.6 Min in the Kepler Field?

BOKS 45906 was found to be a blue source in the Burrell-Optical-Kepler Survey which showed a 3 magnitude outburst lasting approximately 5 days. We present the Kepler light curve of this source which covers nearly 3 years. We find that it is in a faint optical state for approximately half the time and shows a series of outbursts separated by distinct dips in flux. Using data with 1 minute sampling, we find clear evidence that in its low state BOKS 45906 shows a flux variability on a period of 56.5574 plus or minus 0.0014 minutes and a semi-amplitude of approximately 3 percent. Since we can phase all the 1 minute cadence data on a common ephemeris using this period, it is probable that 56.56 minutes is the binary orbital period. Optical spectra of BOKS 45906 show the presence of Balmer lines in emission indicating it is not an AM CVn (pure Helium) binary. Swift data show that it is a weak X-ray source and is weakly detected in the bluest of the UVOT filters. We conclude that BOKS 45906 is a cataclysmic variable with a period shorter than the 'period-bounce' systems and therefore BOKS 45906 could be the first helium-rich cataclysmic variable detected in the Kepler field.

binaries: close↗