Search NASA⌕ Search

SEARCH · Search NASA

Results for “System Study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Structural variation and optical properties of ZnO-LiGaO{sub 2} pseudo-binary system

The structural variation in the x(LiGaO{sub 2}){sub 1/2}(1-x)ZnO alloy system was studied by powder XRD, TEM-SAD and Raman spectroscopy. It was elucidated that the phase varied upon increasing the alloying level was the wurtzite-type for 0{<=}x<0.2, the Zn{sub 2}LiGaO{sub 4}-type for 0.2{<=}x{<=}0.5 and the {beta}-LiGaO{sub 2}-type for 0.8{<=}x{<=}1, and the 0.5<x<0.8 region was the immiscible region of ZnO with LiGaO{sub 2}. The solubility limit of LiGaO{sub 2} in ZnO was explained by the c{sub 0}/a{sub 0} ratio based on the fact that there is no binary wurtzite phase for a c{sub 0}/a{sub 0} less than 1.6. The optical phonons of wurtzite and its derived phase were simply explained by the lattice shrinkage and reduced mass upon reduction the alloying of ZnO with LiGaO{sub 2}. The bowing parameter of the optical band gap of y(Zn{sub 2}LiGaO{sub 4}){sub 1/4}(1-y)ZnO was determined to be 0.67 eV. The value was very low, and it was related to the small lattice and chemical mismatches between the Zn{sub 2}LiGaO{sub 4} and ZnO. - Graphical abstract: The structure of ZnO varied upon alloying with LiGaO{sub 2}. Highlights: Black-Right-Pointing-Pointer We studied structural variation in the x(LiGaO{sub 2}){sub 1/2}(1-x)ZnO alloy system. Black-Right-Pointing-Pointer The wurtzite- and its related Zn{sub 2}LiGaO{sub 4}-type phase appeared for 0{<=}x{<=}0.5. Black-Right-Pointing-Pointer The solubility limit of LiGaO{sub 2} in ZnO was related to the wurtzite c{sub 0}/a{sub 0} ratio. Black-Right-Pointing-Pointer The energy band gap of ZnO was widened up to 4.04 keV by the alloying with LiGaO{sub 2}. Black-Right-Pointing-Pointer The bowing parameter of y(Zn{sub 2}LiGaO{sub 4}){sub 1/4}(1-y)ZnO was determined to be 0.67 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimization of greenhouse gas emissions in second-hand consumer product recovery through reuse platforms

Highlights: • Effects of waste diversion on flow of products to reuse processes. • Framework for solid waste management that focuses on reuse processes for waste diversion. • Application of framework on the material flow and GHG emissions from clothing reuse. - Abstract: Product reuse in the solid waste management sector is promoted as one of the key strategies for waste prevention. This practice is considered to have favorable impact on the environment, but its benefits have yet to be established. Existing research describes the perspective of “avoided production” only, but has failed to examine the interdependent nature of reuse practices within an entire solid waste management system. This study proposes a new framework that uses optimization to minimize the greenhouse gas emissions of an integrated solid waste management system that includes reuse strategies and practices such as reuse enterprises, online platforms, and materials exchanges along with traditional solid waste management practices such as recycling, landfilling, and incineration. The proposed framework uses material flow analysis in combination with an optimization model to provide the best outcome in terms of GHG emissions by redistributing product flows in the integrated solid waste management system to the least impacting routes and processes. The optimization results provide a basis for understanding the contributions of reuse to the environmental benefits of the integrated solid waste management system and the exploration of the effects of reuse activities on waste prevention. A case study involving second-hand clothing is presented to illustrate the implementation of the proposed framework as applied to the material flow. Results of the case study showed the considerable impact of reuse on GHG emissions even for small replacement rates, and helped illustrate the interdependency of the reuse sector with other waste management practices. One major contribution of this study is the development of a framework centered on product reuse that can be applied to identify the best management strategies to reduce the environmental impact of product disposal and to increase recovery of reusable products.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Thermal perturbation of NMR properties in small polar and non-polar molecules

Water is an important constituent in an abundant number of chemical systems; however, its presence complicates the analysis of in situ 1 H MAS NMR investigations due to water’s ease of solidification and vaporization, the large changes in mobility, affinity for hydrogen bonding interactions, etc., that are reflected by dramatic changes in temperature-dependent chemical shielding. To understand the signatures of water and other small molecules in complex environments, in particular how water interacts with the other molecules, in this work the thermally-perturbed NMR properties of water are investigated in detail by in situ MAS NMR. Our results substantially extend the previously published temperature-dependent 1 H and 17 O chemical shifts, linewidths, and spin-lattice relaxation times over a much wider range of temperatures and with significantly enhanced thermal resolution. The following major results are obtained: Hydrogen bonding is clearly shown to weaken at elevated temperatures in both 1 H and 17 O spectra, showing an increase in chemical shielding. At low temperatures, tetrahedral domains of H-bonding networks are evidenced and the observation of solid ice is made under in situ MAS conditions. The 1 H chemical shift properties in other small polar and non-polar molecules have also been described over a range of temperatures, showing the dramatic effect hydrogen bonding perturbation. Gas phase species are described where chemical exchange between gas and liquid phases plays an important role on the observed NMR shifts. The results disclosed herein lay the foundation for a clearer interpretation of complex systems during the increasingly popular in situ NMR characterization at elevated temperatures and pressures for studying chemical systems containing water molecules.

17O NMR↗

The design and research of anti-color-noise chaos M-ary communication system

Previously a novel chaos M-ary digital communication method based on spatiotemporal chaos Hamilton oscillator has been proposed. Without chaos synchronization circumstance, it has performance improvement in bandwidth efficiency, transmission efficiency and anti-white-noise performance compared with traditional communication method. In this paper, the channel noise influence on chaotic modulation signals and the construction problem of anti-color-noise chaotic M-ary communication system are studied. The formula of zone partition demodulator’s boundary in additive white Gaussian noise is derived, besides, the problem about how to determine the boundary of zone partition demodulator in additive color noise is deeply studied; Then an approach on constructing anti-color-noise chaos M-ary communication system is proposed, in which a pre-distortion filter is added after the chaos baseband modulator in the transmitter and whitening filter is added before zone partition demodulator in the receiver. Finally, the chaos M-ary communication system based on Hamilton oscillator is constructed and simulated in different channel noise. The result shows that the proposed method in this paper can improve the anti-color-noise performance of the whole communication system compared with the former system, and it has better anti-fading and resisting disturbance performance than Quadrature Phase Shift Keying system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strong collisionless coupling between an unmagnetized driver plasma and a magnetized background plasma

Fast-exploding plasmas traveling though magnetized, collisionless plasmas can occur in a variety of physical systems, such as supernova remnants, coronal mass ejections, and laser-driven laboratory experiments. To study these systems, it is important to understand the coupling process between the plasmas. Here, in this work, we develop a semi-analytical model of the parameters that characterize the strong collisionless coupling between an unmagnetized driver plasma and a uniformly and perpendicularly magnetized background plasma. In particular, we derive analytical expressions that describe the characteristic diamagnetic cavity and magnetic compression of these systems, such as their corresponding velocities, the compression ratio, and the maximum size of the cavity. The semi-analytical model is compared with collisionless 1D particle-in-cell simulations and experimental results with laser-driven plasmas. The model allows us to provide bounds for parameters that are otherwise difficult to diagnose in experiments with similar setups.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Identifying candidate structured RNAs in CRISPR operons

Noncoding RNAs with secondary structures play important roles in CRISPR-Cas systems. Many of these structures likely remain undiscovered. We used a large-scale comparative genomics approach to predict 156 novel candidate structured RNAs from 36,111 CRISPR-Cas systems. A number of these were found to overlap with coding genes, including palindromic candidates that overlapped with a variety of Cas genes in type I and III systems. Among these 156 candidates, we identified 46 new models of CRISPR direct repeats and 1 tracrRNA. This tracrRNA model occasionally overlapped with predicted cas9 coding regions, emphasizing the importance of expanding our search windows for novel structure RNAs in coding regions. We also demonstrated that the antirepeat sequence in this tracrRNA model can be used to accurately assign thousands of predicted CRISPR arrays to type II-C systems. This study highlights the importance of unbiased identification of candidate structured RNAs across CRISPR-Cas systems.

59 BASIC BIOLOGICAL SCIENCES↗

Noise and thermal depinning of Wigner crystals

We examine changes in the depinning threshold and conduction noise fluctuations for driven Wigner crystals in the presence of quenched disorder. At low temperatures there is a well defined depinning threshold and a strong peak in the noise power with 1/f noise characteristics. At higher temperatures, the depinning threshold shifts to lower drives and the noise, which is also reduced in power, becomes more white in character. At lower temperatures, a washboard frequency appears when the system depins elastically or forms a moving smectic state; however, this washboard signal is strongly reduced for higher temperatures and completely disappears above the melting temperature of a system without quenched disorder. Our results are in good agreement with recent transport and noise studies for systems where electron crystal depinning is believed to arise, and also show how noise can be used to distinguish between crystal, glass, and liquid phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simulations of classical three-body thermalization in one dimension

One-dimensional systems, such as nanowires or electrons moving along strong magnetic field lines, have peculiar thermalization physics. The binary collision of pointlike particles, typically the dominant process for reaching thermal equilibrium in higher-dimensional systems, cannot thermalize a 1D system. We study how dilute classical 1D gases thermalize through three-body collisions. We consider a system of identical classical point particles with pairwise repulsive inverse power-law potential V ij ∝ 1/|x i –x j | n or the pairwise Lennard-Jones potential. Using Monte Carlo methods, we compute a collision kernel and use it in the Boltzmann equation to evolve a perturbed thermal state with temperature T toward equilibrium. We explain the shape of the kernel and its dependence on the system parameters. Additionally, we implement molecular dynamics simulations of a many-body gas and show agreement with the Boltzmann evolution in the low-density limit. For the inverse power-law potential, the rate of thermalization is proportional to ρ 2 ⁢T$\frac{1}{2}$ – $\frac{1}{n}$, where ρ is the number density. Furthermore, the corresponding proportionality constant decreases with increasing n.

1-dimensional systems↗

Correlating Time-Resolved Pressure Measurements With Rim Sealing Effectiveness for Real-Time Turbine Health Monitoring

Purge flow is bled from the upstream compressor and supplied to the under-platform region to prevent hot main gas path ingress that damages vulnerable under-platform hardware components. A majority of turbine rim seal research has sought to identify methods of improving sealing technologies and understanding the physical mechanisms that drive ingress. While these studies directly support the design and analysis of advanced rim seal geometries and purge flow systems, the studies are limited in their applicability to real-time monitoring required for condition-based operation and maintenance. As operational hours increase for in-service engines, this lack of rim seal performance feedback results in progressive degradation of sealing effectiveness, thereby leading to reduced hardware life. To address this need for rim seal performance monitoring, this study utilizes measurements from a one-stage turbine research facility operating with true-scale engine hardware at engine-relevant conditions. Time-resolved pressure measurements collected from the rim seal region are regressed with sealing effectiveness through the use of common machine learning techniques to provide real-time feedback of sealing effectiveness. Two modeling approaches are presented that use a single sensor to predict sealing effectiveness accurately over a range of two turbine operating conditions. Here, the results show that an initial purely data-driven model can be further improved using domain knowledge of relevant turbine operations, which yields sealing effectiveness predictions within 3% of measured values.

42 ENGINEERING↗

Correlating Time-Resolved Pressure Measurements With Rim Sealing Effectiveness for Real-Time Turbine Health Monitoring

Purge flow is bled from the upstream compressor and supplied to the under-platform region to prevent hot main gas path ingress that damages vulnerable under-platform hardware components. A majority of turbine rim seal research has sought to identify methods of improving sealing technologies and understanding the physical mechanisms that drive ingress. While these studies directly support the design and analysis of advanced rim seal geometries and purge flow systems, the studies are limited in their applicability to real-time monitoring required for condition-based operation and maintenance. As operational hours increase for in-service engines, this lack of rim seal performance feedback results in progressive degradation of sealing effectiveness, thereby leading to reduced hardware life. To address this need for rim seal performance monitoring, the present study utilizes measurements from a one-stage turbine research facility operating with true-scale engine hardware at engine-relevant conditions. Time-resolved pressure measurements collected from the rim seal region are regressed with sealing effectiveness through the use of common machine learning techniques to provide real-time feedback of sealing effectiveness. Two modelling approaches are presented that use a single sensor to predict sealing effectiveness accurately over a range of two turbine operating conditions. Results show that an initial purely data-driven model can be further improved using domain knowledge of relevant turbine operations, which yields sealing effectiveness predictions within three percent of measured values.

Compressors↗

Quantum statistical effects in nuclear reactions, fission, and open quantum systems

Quantum diffusion equations with time-dependent transport coefficients are derived from generalized non-Markovian Langevin equations. Generalized fluctuation-dissipation relations and analytical formulas for calculating friction and diffusion coefficients in nuclear processes are obtained. The asymptotics of the transport coefficients and of the correlation functions are investigated. The problem of correlation decay in quantum dissipative systems is studied. A comparative analysis of diffusion coefficients for the harmonic and inverted oscillators is performed. The role of quantum statistical effects during passage through a parabolic potential barrier is investigated. Sets of diffusion coefficient assuring the purity of states at any time instant are found in cases of non-Markovian dynamics. The influence of different sets of transport coefficients on the rate of decay from a metastable state is studied in the framework of the master equation for reduced density matrices describing open quantum systems. The approach developed is applied to investigation of fission processes and the processes of projectile-nuclei capture by target nuclei for bombarding energies in the vicinity of the Coulomb barrier. The influence of dissipation and fluctuation on these processes is taken into account in a self-consistent way. The evaporation residue cross sections for asymmetric fusion reactions are calculated from the derived capture probabilities averaged over all orientations of the deformed projectile and target nuclei.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Evaluation of the Four-Dimensional Ensemble-Variational Hybrid Data Assimilation with Self-Consistent Regional Background Error Covariance for Improved Hurricane Intensity Forecasts

The feasibility of a hurricane initialization framework based on the Gridpoint Statistical Interpolation (GSI)-based four-dimensional ensemble-variational (GSI-4DEnVar) hybrid data assimilation system for the Hurricane Weather Research and Forecasting model (HWRF) model is evaluated in this study. The system considers the temporal evolution of error covariances via the use of four-dimensional ensemble perturbations that are provided by high-resolution, self-consistent HWRF ensemble forecasts. It is different from the configuration of the GSI-based three-dimensional ensemble-variational (GSI-3DEnVar) hybrid data assimilation system, similar to that used in the operational HWRF, which employs background error covariances provided by coarser-resolution global ensembles from the National Centers for Environmental Prediction (NCEP) Global Forecast System (GFS) ensemble Kalman filtering data assimilation system. In addition, our proposed initialization framework discards the empirical intensity correction in the vortex initialization package that is employed by the GSI-3DEnVar initialization framework in operational HWRF. Data assimilation and numerical simulation experiments for Hurricanes Joaquin (2015), Patricia (2015), and Matthew (2016) are conducted during their intensity changes. The impacts of two initialization frameworks on the HWRF analyses and forecasts are compared. It is found that GSI-4DEnVar leads to a reduction in track, minimum sea level pressure (MSLP), and maximum surface wind (MSW) forecast errors in all of the HWRF simulations, compared with the GSI-3DEnVar initialization framework. With assimilating high-resolution observations within the hurricane inner-core region, GSI-4DEnVar can produce the initial hurricane intensity reasonably well without the empirical vortex intensity correction. Further diagnoses with Hurricane Joaquin indicate that GSI-4DEnVar can significantly alleviate the imbalances in the initial conditions and enhance the performance of the data assimilation and subsequent hurricane intensity and precipitation forecasts

54 ENVIRONMENTAL SCIENCES↗

Sensitivity and Importance Measure Analyses for Various Design Architectures for High Safety-Significant Safety-Related Digital Instrumentation and Control Systems of Nuclear Power Plants

A transition from analog instrumentation and control (I&C) technologies to digital I&C technologies is taking place for license renewals of existing nuclear power plants and for operating licenses of new advanced reactors. This transition necessitates research on risk and economic assessments of digital I&C technologies to ensure the long-term safety and reliability of vital systems, reduce uncertainty in licensing costs in addition to timeline, support integration of digital I&C systems in the plant, and find the most efficient technology upgrades. Adding redundancy within systems or components is a common means of improving design safety; however, it can also make designs more prone to common-cause failures (CCFs). Introducing diversity into redundant systems or components is a way to mitigate and possibly eliminate CCFs, but it also increases plant complexity and may be costly. The balance between redundancy and diversity remains a challenge for digital I&C systems. This study performs sensitivity and importance analyses for four design architectures of two digital I&C systems—the reactor-trip system and the engineered safety features actuation system. For each system, two architectures are examined, including a redundant, non-diverse configuration and a redundant, diverse configuration. The sensitivity analysis will provide insights on the impact of introducing diversity to system reliability. The importance results will help identify risk-significant and risk-sensitive components and failure modes, which may be good candidates for future design improvement.

99 GENERAL AND MISCELLANEOUS↗

Energy density matrix formalism for interacting quantum systems: a quantum Monte Carlo study

We develop an energy density matrix that parallels the one-body reduced density matrix (1RDM) for many-body quantum systems. Just as the density matrix gives access to the number density and occupation numbers, the energy density matrix yields the energy density and orbital occupation energies. The eigenvectors of the matrix provide a natural orbital partitioning of the energy density while the eigenvalues comprise a single particle energy spectrum obeying a total energy sum rule. For mean-field systems the energy density matrix recovers the exact spectrum. When correlation becomes important, the occupation energies resemble quasiparticle energies in some respects. We explore the occupation energy spectrum for the finite 3D homogeneous electron gas in the metallic regime and an isolated oxygen atom with ground state quantum Monte Carlo techniques imple- mented in the QMCPACK simulation code. The occupation energy spectrum for the homogeneous electron gas can be described by an effective mass below the Fermi level. Above the Fermi level evanescent behavior in the occupation energies is observed in similar fashion to the occupation numbers of the 1RDM. A direct comparison with total energy differences demonstrates a quantita- tive connection between the occupation energies and electron addition and removal energies for the electron gas. For the oxygen atom, the association between the ground state occupation energies and particle addition and removal energies becomes only qualitative. The energy density matrix provides a new avenue for describing energetics with quantum Monte Carlo methods which have traditionally been limited to total energies.

density matrix↗

A Low-Temperature Crossover in Water Dynamics in an Aqueous LiCl Solution: Diffusion Probed by Neutron Spin-Echo and NMR

Aqueous solutions of lithium chloride are an excellent model system for studying the dynamics of water molecules down to low temperatures without freezing. The apparent dynamic crossover observed in an aqueous solution of LiCl at about 220 to 225 K [Mamontov, JPCB 2009, 113, 14073] is located practically at the same temperature as the crossover found for pure water confined in small hydrophilic pores. This finding suggests a strong similarity of water behavior in these two types of systems. At the same time, studies of solutions allow more effective explorations of the long-range diffusion dynamics, because the water molecules are not confined inside an impenetrable matrix. In contrast to the earlier incoherent quasielastic neutron scattering results obtained for the scattering momentum transfers of 0.3 {angstrom}{sup -1} {le} Q {le} 0.9 {angstrom}{sup -1}, our present incoherent neutron spin-echo measurements at a lower Q of 0.1 {angstrom}{sup -1} exhibit no apparent crossover in the relaxation times down to 200 K. At the same time, our present nuclear magnetic resonance measurements of the diffusion coefficients clearly show a deviation at the lower temperatures from the non-Arrhenius law obtained at the higher temperatures. Our results are consistent with a scenario in which more than one relaxational component may exist below the temperature of the dynamic crossover in water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic and Electronic Properties of BN Nanosheets with Different Nonmagnetic Metal Dopants: a First-Principles Study

The structural, electronic, and magnetic properties of monolayer boron nitride (BN) doped with a series of nonmagnetic metal atoms, including Ga, Li, Mg, and Na, are systematically investigated by the first-principles method. Both different dopants and doping sites are considered. Magnetic behavior is observed in the systems doped with Li, Mg, and Na atoms. On the other hand, owing to the stable structures of the BN monolayers with Li and Mg dopants among the three magnetic systems, we study the magnetic interaction in these two systems. Interestingly, a long-range ferromagnetic (FM) coupling is observed in the BN monolayer with two Li atoms doped as the Li–Li distance increases. Our results show that the FM interaction originates from a p–d exchange-like s–p coupling interaction. Moreover, nonmagnetic state appears in the system with two Mg dopants.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multi-region Modeling of Daily Global Solar Radiation with Artificial Intelligence Ensemble

Solar radiation data are crucial for the design and evaluation of solar energy systems, climatic studies, water resources management, estimating crop productivity, etc. As so, for locations where direct measurements are not available, reliable models may be developed to estimate solar radiation from more readily available data. In this study, two artificial intelligence (AI)-based models including artificial neural network and adaptive neuro-fuzzy inference systems, three temperature-based empirical models including Meza–Varas, Hargreaves–Samani, and Chen, and a conventional multi-linear regression (MLR) model were employed for multi-region daily global solar radiation estimation for Iraq. To ensure appropriate selection of input variables, sensitivity analysis was conducted to determine the dominant parameters. Finally, two ensemble approaches, neural average ensemble and simple average ensemble, were applied to improve the performance of the single models. For this purpose, daily meteorological data of maximum temperature (T{sub max}), minimum temperature (T{sub min}), mean temperature (T{sub mean}), relative humidity (R{sub H}), and wind speed (U{sub 2}) were obtained from January 2006 to December 2016 from four major cities in Iraq representing, north, west, south, and east regions. The results revealed that temperatures (T{sub max}, T{sub mean}, T{sub min}) and relative humidity are the dominant parameters. While temperature-based empirical models and MLR model could be employed to achieve reliable results, AI-based models are superior in performance to other models. Also promising improvement in daily global solar radiation modeling could be achieved by model ensemble. The results of this study affirmed that the provided ensemble approaches can increase the performance of single models up to 19.19%, 7.59%, and 16.81% in training, validation, and testing steps, respectively.

58 GEOSCIENCES↗

Photocatalytic Conversion of CO2 to CO using Rhenium Bipyridine Platforms Containing Ancillary Phenyl or BODIPY Moieties

Harnessing of solar energy to drive the reduction of carbon dioxide to fuels requires the development of efficient catalysts that absorb sunlight. In this work, we detail the synthesis, electrochemistry and photophysical properties of a set of homologous fac-ReI(CO)3 complexes containing either an ancillary phenyl (8) or BODIPY (12) substituent. These studies demonstrate that both the electronic properties of the rhenium center and BODIPY chromophore are maintained for these systems. Photolysis studies demonstrate that both assemblies 8 and 12 are competent catalysts for the photochemical reduction of CO2 to CO in DMF using triethanolamine (TEOA) as a sacrificial reductant. Both these systems display TOFs for photocatalytic CO production upon irradiation with light ( ex 400 nm) of ~5 hr 1 with TON values of approximately 20. Although structural and photophysical measurements demonstrate that electronic coupling between the BODIPY and fac-ReI(CO)3 units is limited for complex 12, this work clearly shows that the photoactive BODIPY moiety is tolerated during catalysis and does not interfere with the observed photochemistry. When taken together, these results provide a clear roadmap for the development of advanced rhenium bipyridine complexes bearing ancillary BODIPY groups for the efficient photocatalytic reduction of CO2 using visible light.

Andrade, Gabriel↗