Search NASA⌕ Search

SEARCH · Search NASA

Results for “X ray diffraction analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Bragg glass signatures in Pd x ErTe 3 with X-ray diffraction temperature clustering

The Bragg glass phase is a nearly perfect crystal with glassy features predicted to occur in vortex lattices and charge-density-wave systems in the presence of disorder. Detecting it has been challenging, despite its sharp theoretical definition in terms of diverging correlation lengths. Here we present bulk probe evidence supporting a Bragg glass phase in the systematically disordered charge-density-wave material of Pd x ErTe 3 . We do this by using comprehensive X-ray data and a machine-learning-based analysis tool called X-ray diffraction temperature clustering (X-TEC). We establish a diverging correlation length in samples with moderate intercalation over a wide temperature range. To enable this analysis, we introduced a high-throughput measure of inverse correlation length that we call peak spread. The detection of Bragg glass order and the resulting phase diagram advance our understanding of the complex interplay between disorder and fluctuations. Moreover, the use of our analysis technique to target fluctuations through a high-throughput measure of peak spread can revolutionize the study of fluctuations in scattering experiments.

36 MATERIALS SCIENCE↗

Synthesis, structural and electrical characterizations of DySr{sub 5}Ni{sub 2.4}Cu{sub 0.6}O{sub 12-{delta}}

A new compound DySr{sub 5}Ni{sub 2.4}Cu{sub 0.6}O{sub 12-{delta}} has been prepared by sol gel method and annealed at 1473 K in 1 atm of Ar gas flow. The X-ray diffraction (XRD) is used for phase identification. The sample shows to adopt the K{sub 2}NiF{sub 4}-type structure based on tolerance factor calculation. XRD analysis using the Rietveld method was carried out and it was found that DySr{sub 5}Ni{sub 2.4}Cu{sub 0.6}O{sub 12-{delta}} (Dy{sub 0.33}Sr{sub 1.67}Ni{sub 0.8}Cu{sub 0.2}O{sub 4-{delta}}') compound crystallizes in tetragonal symmetry with space group I4/mmm (Z=2). The lattice parameters are found to be at room temperature a=3.7696(5) A and c=12.3747(2) A. The final reliability indices were: R{sub B}=5.219% and {chi}{sup 2}=3.47. Four probe electrical resistivity measurements were performed versus temperature in the range 294-579 K. A semiconducting behaviour over the whole range of temperature, with a conductivity maximum of 0.4 S cm{sup -1} is observed at 510 K. - Graphical abstract: DySr{sub 5}Ni{sub 2.4}Cu{sub 0.6}O{sub 12-{delta}} exhibits a semi-conducting behaviour over the whole temperature range 294-579 K with a conductivity maximum of 0.4 S cm{sup -1} at 510 K. Highlights: > We described our attempts to synthesize the pure compound DySr{sub 5}Ni{sub 2.4}Cu{sub 0.6}O{sub 12-{delta}}. > Product was characterized by XRD and electrical resistivity measurements. > Iodometric titration was used for the analysis of the oxygen nonstoichiometry. > Calculated tolerance factor was included in the tetragonal symmetry stability range. > Compound exhibits a semi-conducting behaviour over the whole temperature range 294-579 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polystyrene/MoS{sub 2}@oleylamine nanocomposites

The effects of adding different concentrations of MoS{sub 2}@oleylamine nano particles on the thermal and mechanical properties of polystyrene (PS) nanocomposites have been investigated. X-ray diffraction and optical microscopy were used to characterize the morphology of the resulting nanocomposites. The thermal stability of the nanocomposites has been characterized by thermogravimetric analysis. It has been found that the MoS{sub 2}@oleylamine nanoparticles have a good compatibility with the PS matrix forming homogeneous dispersion even at high concentrations. The PS/MoS{sub 2}@oleylamine nanocomposites showed enhanced thermal stability in comparison with neat polystyrene.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Isomorphism and solid solutions among Ag- and Au-selenides

Au-Ag selenides were synthesized by heating stoichiometric mixtures of elementary substances of initial compositions Ag{sub 2−x}Au{sub x}Se with a step of x=0.25 (0≤x≤2) to 1050 °C and annealing at 500 °C. Scanning electron microscopy, optical microscopy, electron microprobe analysis and X-ray powder diffraction methods have been applied to study synthesized samples. Results of studies of synthesized products revealed the existence of three solid solutions with limited isomorphism Ag↔Au: naumannite Ag{sub 2}Se – Ag{sub 1.94}Au{sub 0.06}Se, fischesserite Ag{sub 3}AuSe{sub 2} - Ag{sub 3.2}Au{sub 0.8}Se{sub 2} and gold selenide AuSe - Au{sub 0.94}Ag{sub 0.06}Se. Solid solutions and AgAuSe phases were added to the phase diagram of Ag-Au-Se system. Crystal-chemical interpretation of Ag-Au isomorphism in selenides was made on the basis of structural features of fischesserite, naumannite, and AuSe. - Highlights: • Au-Ag selenides were synthesized. • Limited Ag-Au isomorphism in the selenides is affected by structural features. • Some new phases were introduced to the phase diagram Ag-Au-Se.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal plasma synthesis of Fe{sub 1−x}Ni{sub x} alloy nanoparticles

Fe-Ni alloy nanoparticles are of great interest because of diverse practical applications in the fields such as magnetic fluids, high density recording media, catalysis and medicine. We report the synthesis of Fe-Ni nanoparticles via thermal plasma route. Thermal plasma assisted synthesis is a high temperature process and gives high yields of production. Here, we have used direct arc thermal plasma plume of 6kw as a source of energy at operating pressure 500 Torr. The mixture of Fe-Ni powder in required proportion (Fe{sub 1−x}Ni{sub x}; x=0.30, 0.32, 0.34, 0.36, 0.38 and 0.40) was made to evaporate simultaneously from the graphite anode in thermal plasma reactor to form Fe-Ni bimetallic nanoparticles. The as synthesized particles were characterized by X-Ray Diffraction (XRD), Thermo-Gravimetric Analysis/Differential Scanning Calorimtry (TGA/DSC)

36 MATERIALS SCIENCE↗

A parametric study of accelerated carbonation in alkali-activated slag

Resistance to carbonation is one important attribute that low-CO{sub 2} cement alternatives must possess, and is particularly crucial for cement alternatives subjected to aggressive CO{sub 2} concentrations such as those used in construction of oil wells and wells for below ground carbon sequestration. Here, a parametric study of alkali-activated slag (AAS) carbonation in aggressive environments has been conducted to examine (i) calcium carbonate polymorphism using X-ray diffraction (XRD) and Fourier-transform infrared (FTIR) spectroscopy, and (ii) the extent of calcium carbonate formation and CO{sub 2} adsorption using thermogravimetric analysis (TGA). A range of AASs have been studied by varying the magnesium content of the slag, the activator type (sodium hydroxide and sodium silicate), the activator concentration, and the curing time prior to carbonation. It was uncovered that both (i) magnesium from the slag and (ii) silica from the activating solution are needed to reduce the propensity for the sodium-containing calcium-alumino-silicate-hydrate gel to undergo decalcification.

36 MATERIALS SCIENCE↗

Structural, Mechanical, and Electrical Behavior of Ceramic-Reinforced Copper Metal Matrix Hybrid Composites

This article presents the structural, mechanical, and electrical behavior of ceramic-reinforced copper metal matrix hybrid composites developed by stir-casting technique. Commercial copper was used as matrix, and different weight percentages of boron carbide (B{sub 4}C), with constant weight percentage of tungsten carbide, boron nitride, and chromium, were used as reinforcements. Copper hybrid composites were characterized by high-resolution x-ray diffraction, optical microscope, scanning electron microscope, energy-dispersive analysis of x-ray, high-resolution scanning electron microscope, and Fourier transform infrared spectroscopy. Density, hardness, tensile strength, compressive strength, and electrical conductivity were also analyzed. These hybrid composites show improved mechanical properties such as hardness, tensile strength, and compressive strength, while relatively lower density and electrical conductivity were observed.

36 MATERIALS SCIENCE↗

Nanoparticles of La{sub 0.8}Ca{sub 0.2}Fe{sub 0.8}Ni{sub 0.2}O{sub 3-{delta}} perovskite for solid oxide fuel cell application

Polycrystalline samples of La{sub 0.8}Ca{sub 0.2}Fe{sub 0.8}Ni{sub 0.2}O{sub 3-{delta}} (LCFN) with perovskite type structure have been prepared by combustion, freeze drying, citrate-gel process and liquid mix method. The analysis of X-ray powder diffraction indicated that the samples were single phase and crystallized in an orthorhombic (space group, Pnma no. 62) structure. Transmission electron microscopy (TEM) analysis on the synthesized powder at 600 {sup o}C by liquid mix method showed clusters of 150 nm formed by nanoparticles of 20 nm. Electrochemical performance of LCFN cathodes, which are used for intermediate temperature solid oxide fuel cells, were investigated. The polarization resistance was studied using two different electrolytes: Y-doped zirconia (YSZ) and Sm-doped ceria (SDC). The dc four-probe measurement exhibits a total electrical conductivity, over 100 S cm{sup -1} at T {>=} 600 {sup o}C, pointing out that strontium can be substituted for the cheaper calcium cation without destroying the electrochemical properties. Experimental results indicate that nanoparticles have more advantages in terms of smaller particle size and better electrochemical performance.

36 MATERIALS SCIENCE↗

The influence of pressure on the phase stability of nanocomposite Fe{sub 89}Zr{sub 7}B{sub 4} during heating from energy dispersive x-ray diffraction

Nanocomposite materials consisting of small crystalline grains embedded within an amorphous matrix show promise for many soft magnetic applications. The influence of pressure is investigated by in situ diffraction of hammer milled Fe{sub 89}Zr{sub 7}B{sub 4} during heating through the {alpha}{yields}{gamma} Fe transition at 0.5, 2.2, and 4.9 GPa. The changes in primary and secondary crystallization onset are described by diffusion and the energy to form a critical nucleus within the framework of classical nucleation theory.

36 MATERIALS SCIENCE↗

Growth and properties of crystalline CuInSe{sub 2} thin films by SPD technique

CuInSe{sub 2} thin films were grown on glass substrates using the chemical spray pyrolysis technique. The CuInSe{sub 2} films were co-deposited from aqueous solutions containing CuCl{sub 2}, InCl{sub 3}, and SeO{sub 2} used as Cu, In and Se precursors respectively. EDC was used as a complexing agent and films were grown at the constant temperature of 270°C. The films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Energy dispersive analysis of X-rays (EDAX) and the results indicate that the films are single phase, p-type in conductivity and have the chalcopyrite structure. Optical study shows that the optical band gap value is 1.03 eV. From the XRD study it is clear that the average crystallite size of the films is in the range 50 to 70 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spectroscopic investigation of 2.02 {mu}m emission in Ho{sup 3+}/Tm{sup 3+} codoped transparent glass ceramic containing CaF{sub 2} nanocrystals

Tm{sup 3+} and Ho{sup 3+} codoped transparent glass ceramic (GC) containing CaF{sub 2} nanocrystals were fabricated by melt-quenching and subsequent thermal treatment. X-ray diffraction and transmission electron microscopy analysis confirmed the precipitation of CaF{sub 2} nanocrystals among the glass matrix. Energy-dispersive x-ray spectroscopy results evidenced the incorporation of Tm{sup 3+} and Ho{sup 3+} into the CaF{sub 2} nanocrystals. Judd-Ofelt parameters were calculated based on the absorption spectra, the smaller {Omega}{sub 2} and larger {Omega}{sub 6} imply that Tm{sup 3+} and Ho{sup 3+} ions has entered into a symmetrical ionic crystal field. 2.02 {mu}m emission spectral of the GC samples were recorded at room temperature with an excitation of 808 nm laser diode. The enhancement of the emission at 2.02 {mu}m in the GC samples could be attributed to more efficient cross relaxation process of Tm{sup 3+}:{sup 3}H{sub 4+}Tm{sup 3+}:{sup 3}H{sub 6}{yields}{sup 2}Tm{sup 3+}:{sup 3}H{sub 4}, and energy transfer from Tm{sup 3+} to Ho{sup 3+} benefited from the incorporation of rare earth ions into CaF{sub 2} nanocrystals.

36 MATERIALS SCIENCE↗

Structural characterization of InSb thin films grown by electrodeposition

In the present work we have grown InSb thin films on brass substrates, using the electrodeposition technique. The electrochemical baths used in the growth were made up of aqueous solutions of InCl{sub 3} and SbCl{sub 3} mixed together in various proportions. The films grown were characterized by X-Ray diffraction (XRD), Scanning Electron Microscopy (SEM), and Energy Dispersive Analysis of X-rays (EDAX). Compositional studies show that stoichiometric InSb films can be prepared from a bath containing 0.05M InCl{sub 3} and 0.04M SbCl{sub 3}. XRD studies reveal that the films grown are polycrystalline having the zinc blende structure with (111) orientation. Crystallite size, dislocation density and strain were calculated using the XRD results. Optical transmission spectra were recorded using an FTIR spectrophotometer. The value of direct band gap was found to be around 0.20 eV for the thin films having the best stoichiometry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructural analysis and thermoelectric properties of Sn-Al co-doped ZnO ceramics

Sn-Al co-doped polycrystalline ZnO ceramics were prepared by sintering in air. Phase and microstructure analysis was performed by X-ray diffraction and SEM-EDS and thermoelectric properties were measured. XRD analysis showed a ZnO primary phase as well as secondary phase peaks due to the formation of a Zn{sub 2}SnO{sub 4} spinel phase or SnO{sub 2}(ZnO:Sn-Al){sub m} intergrowth phase. SEM analysis revealed a dense microstructure with a small number of nanometric pores, consistent with the measured density of 5.48 g/cm{sup 3}. An activated electrical conductivity characteristic of a semiconducting material was observed as well as a negative Seebeck coefficient with both values increasing in absolute value from RT to 730 °C. The power factor had a maximum value of 3.73×10{sup −4} W m{sup −1} K{sup −2} at 730 °C. Thermal conductivity measurements showed a significant reduction over the measured temperature range compared to undoped ZnO. This could be attributed to grain size reduction, the formation of a nanoscale secondary phase or a reduction in crystallinity caused by Sn-Al co-doping. A maximum ZT of 0.06 was obtained at 750 °C for the Sn-Al co-doped ZnO ceramics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The system Ce-Zn-B at 800 deg. C

The isothermal section for the system Ce-Zn-B has been established at 800 deg. C using electron microprobe analysis and X-ray powder diffraction. No ternary compounds exist and mutual solid solubilities of binary phases are negligible. In the concentration range of 10.0-10.5 at% Ce two structural modifications have been confirmed: high temperature {beta}Ce{sub 2}Zn{sub 17} above {approx}750 deg. C with the Th{sub 2}Zn{sub 17} type (R3-bar m, a=0.90916(4) nm, c=1.3286(1) nm) and low temperature {alpha}CeZn{sub 7} (Ce{sub 1-x}Zn{sub 5+2x}; x{approx}0.33) up to 750 deg. C for which we attributed the TbCu{sub 7} type (P6/mmm, a=0.52424(2), c=0.44274(1) nm). The crystal structure of CeZn{sub 7} was derived from the Rietveld refinement of X-ray powder intensities. Precise data on atom site distribution and positional parameters have been furthermore provided from X-ray single crystal refinements for two compounds, for which crystal structures hitherto have only been derived from X-ray diffraction photographs: Ce{sub 3}Zn{sub 11} (Immm, a=0.45242(2) nm, b=0.88942(3) nm, c=1.34754(4) nm) and Ce{sub 3}Zn{sub 22} (I4{sub 1}/amd; a=0.89363(2) nm, c=2.1804(5) nm). - Graphical abstract: Existence of low temperature modification {alpha}CeZn{sub 7} (Ce{sub 1-x}Zn{sub 5+2x}; x{approx}0.33) of Ce{sub 2}Zn{sub 17} has been verified up to 750 deg. C that is attributed with the TbCu{sub 7} type. Highlights: > Isothermal section of system Ce-Zn-B at 800 deg. C. > In System Ce-Zn, X-ray single crystal intensity data refinement of Ce{sub 3}Zn{sub 11} and Ce{sub 3}Zn{sub 22} and Rietveld refinement of Ce{sub 13}Zn{sub 58}. > Two temperature modifications of Ce{sub 2}Zn{sub 17}, rhombohedral {beta}Ce{sub 2}Zn{sub 17} (hT) and of hexagonal {alpha}CeZn{sub 7} (lT). > No ternary compound in the System Ce-Zn-B (<50 at% Ce) at 800 deg. C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and Characterization of Lead Calcium Titanate Nanocomposite

Lead calcium titanate nanoparticles (PCT-NPs) were synthesized by the modified sol-gel method. The mixed metal alkoxide precursor was prepared by moderate refluxing using lead acetate, calcium acetate, titanium iso-propoxide and 2-methoxyethanol. The properties of PCT-NPs were studied as a function of calcination temperatures. Results from the powder X-ray diffraction (XRD) and thermal analysis (TGA/DTA), indicated that the single-phase perovskite PCT-NPs were obtained after heat treatment at temperature of 700 deg. C. The average particle size of synthesized PCT-NPs was found to be around 30 nm from transition electron microscopy (TEM).

36 MATERIALS SCIENCE↗

Decoding diffraction and spectroscopy data with machine learning: A tutorial

This Tutorial provides a step-by-step guide on how to apply supervised machine-learning techniques to analyze diffraction and spectroscopy data. This Tutorial details four models—a reconstruction-focused model, a regression-focused model, a hybrid reconstruction/regression model, and a multimodal model—that use x-ray diffraction profiles and vibrational density of states spectra to predict various microstructural descriptors. In this Tutorial, we cover data pre-processing steps, constructions of the models via dimensionality reduction and regression, training, and analysis of these models. Comparisons of the model’s performance are provided, highlighting the strength and weakness of the various approaches utilized.

36 MATERIALS SCIENCE↗

Stoichiometry of LaAlO{sub 3} films grown on SrTiO{sub 3} by pulsed laser deposition

We have studied the stoichiometry of epitaxial LaAlO{sub 3} thin films on SrTiO{sub 3} substrate grown by pulsed laser deposition as a function of laser energy density and oxygen pressure during the film growth. Both x-ray diffraction ({theta}-2{theta} scan and reciprocal space mapping) and transmission electron microscopy (geometric phase analysis) revealed a change of lattice constant in the film with the distance from the substrate. Combined with composition analysis using x-ray fluorescence we found that the nominal unit-cell volume expanded when the LaAlO{sub 3} film was La-rich, but remained near the bulk value when the film was La-poor or stoichiometric. La excess was found in all the films deposited in oxygen pressures lower than 10{sup -2} Torr. We conclude that the discussion of LaAlO{sub 3}/SrTiO{sub 3} interfacial properties should include the effects of cation off-stoichiometry in the LaAlO{sub 3} films when the deposition is conducted under low oxygen pressures.

36 MATERIALS SCIENCE↗

Improvement microstructural and damage characterization of ceramic composites Y{sub 2}O{sub 3} – V{sub 2}O{sub 5} with MgO nano particles

Compacted samples of Y{sub 2}O{sub 3}-V{sub 2}O{sub 5} – MgO Nano – particles wt. % sintered at different sintering temperature (700, 900, 1100, 1300) ) C° for 2 hours under static air were investigated by x-ray diffraction and differential thermal analysis(DTA), to identify the phase present .Microstructure examination achieved by scanning electron microscopy .Sintered density and porosity were measured for all sintered samples .Compression was tested too and the Brake down voltage and dielectric strength were measure for all sintered samples .The clear improvement were noticed in both microstructure and damage characterization respectively after existing the MgO Nano-particles, by increasing in about 30% in sintered density and 25% for the compressive strength .The improvement also noticed on both brake down voltage and dielectric strength.

36 MATERIALS SCIENCE↗