Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomic patterning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Investigations on structural, vibrational and dielectric properties of nanosized Cu doped Mg-Zn ferrites

Transition metal Cu{sup 2+} doped Mg-Zn ferrite [Mg{sub 0.5}Zn{sub 0.5-x}Cu{sub x}Fe{sub 2}O{sub 4} (0.0 ≤ x ≤ 0.5)] were prepared by sol gel auto combustion (SGAC) method to probe the structural, vibrational and electrical properties. X-ray diffraction (XRD) pattern reveals a single-phase cubic spinel structure without the presence of any secondary phase corresponding to other structure. The average particle size of the parent Mg{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} is found to be ~29.8 nm and is found to increase with Cu{sup 2+} doping. Progressive reduction in lattice parameter of Mg{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} has been observed due to difference in ionic radii of cations with improved Cu doping. Spinel cubic structure is further confirmed by Raman spectroscopy. Small shift in Raman modes towards higher wave number has been observed in doped Mg-Zn ferrites. The permittivity and dielectric loss decreases at lower doping and increases at higher order doping of Cu{sup 2+}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal structures of the new ternary stannides La{sub 3}Mg{sub 4−x}Sn{sub 2+x} and LaMg{sub 3−x}Sn{sub 2}

Synthesis and structural characterization of the two new lanthanum–magnesium–stannides La{sub 3}Mg{sub 4−x}Sn{sub 2+x} (0.12≤x≤0.40) and LaMg{sub 3−x}Sn{sub 2} (0.33≤x≤0.78) are reported. The crystal structures of these intermetallics were determined by single crystal X-ray diffraction analysis and confirmed by Rietveld refinement of powder X-ray diffraction patterns of the corresponding samples. The La{sub 3}Mg{sub 4−x}Sn{sub 2+x} phase crystallizes in the hexagonal Zr{sub 3}Cu{sub 4}Si{sub 2} structure type (P6¯2m, hP9, Z=3, x=0.12(1), a=7.7974(7), c=4.8384(4) Å), which represents an ordered derivative of the hP9-ZrNiAl prototype, ubiquitous among equiatomic intermetallics. The LaMg{sub 3–x}Sn{sub 2} phase is the second representative of the trigonal LaMg{sub 3−x}Ge{sub 2} type, which is a superstructure of the LaLi{sub 3}Sb{sub 2} structure type (P3¯1c, hP34-0.12, Z=6, x=0.35(1), a=8.3222(9), c=14.9546(16) Å). The scheme describing the symmetry reduction/coloring with respect to the parent type is reported here with the purpose to discuss the LaMg{sub 3−x}Sn{sub 2} off-stoichiometry from the geometrical point of view. Structural relationships between the La–Mg–Sn ternary phases, including the already known equiatomic LaMgSn compound (oP12-TiNiSi), are presented in the framework of the AlB{sub 2}-related compounds family and discussed with the aid of group-subgroup relations in the Bärnighausen formalism. - Graphical abstract: Crystal structure of LaMg{sub 3−x}Sn{sub 2} viewed along the (001) direction together with the puckered layer of Mg and Sn atoms hosting Mg2, Mg3 and vacancy □. - Highlights: • Crystal structures of the new La{sub 3}Mg{sub 4−x}Sn{sub 2+x} and LaMg{sub 3−x}Sn{sub 2} phases were determined. • The off-stoichiometry of LaMg{sub 3−x}Sn{sub 2} was discussed from geometrical point of view. • Structural relations between the known La–Mg–Sn phases were established. • The studied compounds are related to the AlB{sub 2} type by symmetry reduction.

36 MATERIALS SCIENCE↗

Comparison of All Solid Cancer Mortality and Incidence Dose-Response in the Life Span Study of Atomic Bomb Survivors, 1958–2009

Recent analysis of all solid cancer incidence (1958–2009) in the Life Span Study (LSS) revealed evidence of upward curvature in the radiation dose response among males but not females. Upward curvature in sex-averaged excess relative risk (ERR) for all solid cancer mortality (1950–2003) was also observed in the 0–2 Gy dose range. As reasons for non-linearity in the LSS are not completely understood, we conducted dose response analyses for all solid cancer mortality and incidence applying similar methods (1958–2009 follow-up, DS02R1 doses, including subjects notin-city (NIC) at the time of the bombing) and statistical models. Incident cancers were ascertained from Hiroshima and Nagasaki cancer registries, while cause of death was ascertained from death certificates over entire Japan. The study included 105,444 LSS subjects who were alive and not known to have cancer before Jan 1, 1958 (80,205 with dose estimates and 25,239 NIC subjects). Between 1958 and 2009, there were 3.1 million person-years (PY) and 22,538 solid cancers for incidence analysis and 3.8 million PY and 15,419 solid cancer deaths for mortality analysis. We fitted sex-specific ERR models adjusted for smoking to both types of data. Over the entire range of doses, solid cancer mortality dose response exhibited a borderline significant upward curvature among males (P=0.062) and significant upward curvature among females (P=0.010); for solid cancer incidence, as before, we found a significant upward curvature among males (P=0.001) but not among females (P=0.624). The sex difference in magnitude of dose response curvature was statistically significant for cancer incidence (P=0.017) but not for cancer mortality (P=0.781). The results of analyses in the 0–2 Gy range and restricted lower dose ranges generally supported inferences made about the sex-specific dose response shape over the entire range of doses for each outcome. Patterns of sex-specific curvature by calendar period (1958–1987 vs 1988–2009) and age at exposure (0–19 vs 20–83) varied between mortality and incidence data, particularly among females, although for each outcome there was an indication of curvature among 0–19 year old male survivors in both calendar periods and among 0–19 year old female survivors in the recent period. Collectively, our findings indicate that the upward curvature in all solid cancer dose response in the LSS is neither specific to males nor to incidence data; it appears to depend on composition of case series and age at exposure or time. Further follow-up and site-specific analyses of cancer mortality and incidence will be important to confirm the emerging trend in dose response curvature among young survivors and unveil the contributing factors and sites.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Rotation of electrothermal-instability-driven overheating structure due to helically oriented surface magnetic field on a high-current-density aluminum rod

Experiments on the 1-MA, 100-ns-rise-time Mykonos Facility demonstrate rotation of electrothermal instability (ETI)-driven overheating structure on 1.00-mm-diameter, 10-nm-surface roughness, 99.999%-pure aluminum rods, which are pulsed with helically polarized surface magnetic field. Rods are machined to include pairs of 10-micron-scale quasi-hemispherical voids or “engineered defects (ED)” which provide the dominant current density perturbation from which ETI grows most rapidly. Experiments include an axial magnetic field component through the addition of a helically wound return-current electrode or “helical return can (HRC).” For a given HRC design, azimuthal field (B ɵ ) and axial field (B z ) components rise at a prescribed and fixed ratio, driving an increasing magnetic field of constant polarization at the rod's surface; most experiments generated surface magnetic field at a 15-degree field polarization angle (from horizontal) defined as ɸ B = arctan(B z /B ɵ ). ETI-driven emission patterns from individual ED are observed to rotate along ɸ B , while emission patterns from dielectric-coated ED pairs are shown to elongate and preferentially merge along ɸ B , in qualitative agreement with 3D-magnetohydrodynamic simulations. These data strongly support that for a randomized distribution of current density perturbations on a high-current density conductor, nearby perturbations will favorably merge about ɸ B , with the degree of merging increasing with current. Such observations offer fundamental new understanding of the seeding mechanisms of the helical magneto-Rayleigh Taylor (MRT) instabilities observed from axially magnetized magnetically driven imploding liners.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Boson Fermion Nuclei And Structures Throughout The Periodic Table Of Elements: Monograph #8

A homologous structural pattern among nuclei that corresponds to the periodicity of the periodic table of elements has been identified. Schematic diagrams of boson fermion nuclei (BFN) are shown for nuclei throughout the periodic table of elements. Transition elements in the fourth, fifth, and sixth periods display bridges between the legs of the tetrahedral nuclear structure, occurring where the nuclear structure is sufficiently massive to create potential wells able to hold the nucleons in a fermion-pocket quantum system bridging the legs. These nuclei are not formed by buildup, as in stepwise nuclear fusion or nucleon capture, but by a process in which the nucleus has “fallen down” in mass during stellar nucleosynthesis from a higher A and Z, shedding nucleons and decaying radioactively to arrive at a lowest-energy-system, stable-boson-fermion nuclear structure.

07 ISOTOPE AND RADIATION SOURCES↗

Ion effects in hydrogen-induced blistering of Mo/Si multilayers

The role that energetic (>800 eV) hydrogen ions play in inducing and modifying the formation of blisters in nanoscale Mo/Si multilayer samples is investigated. Such samples are confirmed to be susceptible to blistering by two separate mechanisms. The first is attributed to the segregation of H atoms to voids and vacancies associated with the outermost Mo layer, driving blister formation in the form of H{sub 2} filled bubbles. This process can occur in the absence of ions. A second blister distribution emerges when energetic ions are present in the irradiating flux. This is attributed to an ion-induced vacancy clustering mechanism that produces void blisters. The defects and strained states associated with the Mo-on-Si interfaces provide the preferred nucleation points for blistering in both cases. The effects of ions are ascribed to promotion of hydrogen uptake and mobility, in particular through the Si layers; to the generation of additional mobile species in the Si and Mo layers; and to the creation of new blister nucleation points. In addition to directly stimulating blistering via vacancy clustering, ions modify the development of H{sub 2}-filled blisters. This is most evident in the formation of multi-component structures due to overlapping delaminations at different layer interfaces. This affect is attributed to the introduction of active transport of hydrogen from the H{sub 2} filled blisters across the outermost Mo-on-Si interface to the underlying layers. Ion-induced variations in hydrogen uptake and distribution and in the rates of blister nucleation and growth produce lateral differences in blister size and areal number density that create a macroscopic concentric pattern across the surface.

36 MATERIALS SCIENCE↗

Relationships between the Stellar, Gaseous, and Star Formation Disks in LITTLE THINGS Dwarf Irregular Galaxies: Indirect Evidence for Substantial Fractions of Dark Molecular Gas

The stellar, gaseous and young stellar disks in the LITTLE THINGS sample of nearby dwarf irregular galaxies are fitted with functions to search for correlations between the parameters. We find that the H i radial profiles are generally flatter in the center and fall faster in the outer regions than the V-band profiles, while young stars are more centrally concentrated, especially if the H i is more centrally flat. This pattern suggests that the H i is turning into molecules in the center, and the molecular clouds are forming stars and FUV. A model that assumes the molecular surface density is proportional to the total gas surface density to a power of 1.5 or 2, in analogy with the Kennicutt–Schmidt relation, reproduces the relationship between the ratio of the visible to the H i scale length and the H i Sérsic index. The molecular fraction is estimated as a function of radius for each galaxy by converting the FUV to a molecular surface density using conventional calibrations. The average molecular fraction inside 3R {sub D} is 23% ± 17%. However, the break in the stellar surface brightness profile has no unified tracer related to star formation.

74 ATOMIC AND MOLECULAR PHYSICS↗

Characterizing the Three-Dimensional Structure of Block Copolymers via Sequential Infiltration Synthesis and Scanning Transmission Electron Tomography

Understanding and controlling the three-dimensional structure of block copolymer (BCP) thin films is critical for utilizing these materials for sub-20 nm nanopatterning in semiconductor devices, as well as in membranes and solar cell applications. Combining an atomic layer deposition (ALD) based technique for enhancing the contrast of BCPs in transmission electron microscopy (TEM) together with scanning TEM (STEM) tomography reveals and characterizes the three-dimensional structures of poly(styrene-block-methyl methacrylate) (PS-b-PMMA) thin films with great clarity. Sequential infiltration synthesis (SIS), a block-selective technique for growing inorganic materials in BCPs films in ALD, and an emerging tool for enhancing the etch contrast of BCPs, was harnessed to significantly enhance the high-angle scattering from the polar domains of BCP films in the TEM. The power of combining SIS and STEM tomography for three dimensional (3D) characterization of BCPs films was demonstrated with the following cases: self-assembled cylindrical, lamellar, and spherical PS-PMMA thin films. In all cases, STEM tomography has revealed 3D structures that were hidden underneath the surface, including: 1) the 3D structure of defects in cylindrical and lamellar phases, 2) non-perpendicular 3D surface of grain boundaries in the cylindrical phase, and 3) the 3D arrangement of spheres in body centered cubic (BCC) and hexagonal closed pack (HCP) morphologies in the spherical phase. The 3D data of the spherical morphologies was compared to coarse-grained simulations and assisted in validating the simulations’ parameters. STEM tomography of SIS-treated BCP films enables the characterization of the exact structure used for pattern transfer, and can lead to better understating of the physics which is utilized in BCP lithography.

Block copolymers↗

High-pressure crystallography and compression behavior of the alkali-scandium-germanate end-members LiScGe{sub 2}O{sub 6} and NaScGe{sub 2}O{sub 6}

Synthetic single-crystal samples of the monoclinic pyroxene-type compounds LiScGe{sub 2}O{sub 6} and NaScGe{sub 2}O{sub 6} have been investigated by means of in-situ high-pressure Raman spectroscopy and X-ray diffraction techniques. Crystal-structure investigations at hydrostatic high-pressure conditions were carried out in addition to 10{sup −4} GPa measurements using the diamond-anvil cell technique up to ∼9.5 GPa. Both samples, LiScGe{sub 2}O{sub 6} (space group P2{sub 1}/c, a=9.9999(8) Å, b=9.1040(2) Å, c=5.4610(2) Å, β=109.240(2)° at 10{sup −4} GPa) and NaScGe{sub 2}O{sub 6} (space group C2/c, a=10.1678(5) Å, b=9.1583(5) Å, c=5.5672(3) Å, β=107.257(3)° at 10{sup −4} GPa), did not undergo any compression-induced change of symmetry as confirmed by single-crystal diffraction patterns. Series of high-pressure Raman spectra confirm the absence of any symmetry-related structural phase transition with band positions shifting in a smooth fashion on increasing pressure. High-precision lattice parameters, as determined from X-ray diffraction profile analyzes, were used to monitor both the compressibilities of lattice directions and the evolution of the unit-cell volume with pressure. The experimental data was fitted using a third-order Birch–Murnaghan equation-of-state approach and parameterized fits yield V{sub 0}=469.60(11) Å{sup 3}, K{sub 0}=85.6(1.3) GPa and K′=5.9(4) for LiScGe{sub 2}O{sub 6} and V{sub 0}=495.95(19) Å{sup 3}, K{sub 0}=79(3) GPa and K′=3.9(1.1) for NaScGe{sub 2}O{sub 6}. The systematic comparison of volume properties and compression behavior shows that both pyroxene-type compounds follow established trend lines with similar slopes in comparing volumes versus bulk moduli, and confirm that the position of trend lines in this systematics describing variations with M1 critically depend on the type of M2 and T cations, independent on the space-group symmetry. - Graphical abstract: Polyhedral model of the LiScGe{sub 2}O{sub 6} crystal structure at 9.51 GPa. Red and blue: crystallographic distinctive germanium-tetrahedral chains; Green: scandium-octahedral chains; Purple: lithium atoms. - Highlights: • High-quality high-pressure data of previously uninvestigated germanate compounds. • Results confirmed through complementing sXRD with Raman spectroscopy. • Comparison and relation of high-pressure pyroxene-type compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tracking multiple generation and suppression of secondary electrons on periodic triangular surface

To research the dynamic course of multipactor suppression on the periodically patterned surface, tens of electron collision processes are tracked by numerical calculation. The influences of microwave frequency, amplitude of RF electric field, slope angle, the local field enhancement, and the tilted incident electric field on the multipactor suppression are studied by tracking multi-generation electrons' trajectories, hopping and flight time, collision energy, and secondary emission yield. Meanwhile, the dynamic processes of secondary electrons on the periodic surface are analyzed by particle-in-cell (PIC) simulation. The PIC results are consistent with the analytical results in which the electrons fly reciprocatingly between the slopes and impact on the slopes; the methods of increasing the slope angle, enlarging the RF field, and lowering the frequency in a certain range are helpful to enhance the multipactor suppression steadily and persistently.

74 ATOMIC AND MOLECULAR PHYSICS↗

Decontaminant delivery and application methods to enhance decontamination process and efficacy

The objective for the experimental effort was to provide validation for the electrostatic aerosol transport models for particle size and deposition rate and to determine the feasibility of an electrostatic spray process in delivering non-corrosive decontaminants to complex interior spaces, such as an aircraft. The project utilized ITW (Illinois Tool Works) rotary atomizing induction charged nozzle to disperse small, charged droplets of liquid decontaminants uniformly through a contaminated space. Particle size and deposition studies were conducted prior to the feasibility study where the ITW nozzle was optimized and characterized for two decontaminants: EasyDeconTM200 (DF-200) and Steriplex® SD. In addition to the validation studies, two feasibility studies were conducted with anthrax simulant (B. atrophaeus) and sarin simulant (diphenol chlorophosphate, DPCP). Running parameters for the two studies varied according to the starting contaminant challenges (1.0 x 108 CFU/m 2 for B. atrophaeus and 1.0 g/m 2 for DPCP), the amount of decontaminant deposition, and, finally, decontaminant to agent contact time. Results for the DPCP study confirm that our spray method met and exceeded the threshold criteria of <10 mg/m 2 , postdecontamination, for Teflon and aluminum coupons. Results from this study also showed that polycarbonate and rubber coupons can be reduced by <98% and <92%, respectively. Results for the B. atrophaeus study presented a slightly different challenge due to coupon size, however, increasing the size of the coupon confirmed that it is possible for our spray method to meet the threshold criteria of <100 CFU/m 2 . In addition, a computational model was developed in ANSYS Fluent to solve for the air flow, space charge, electric field, and droplet motion involved in electrostatic aerosol transport. Comparison of the model to experiments resulted in good agreement in deposition pattern and total mass deposited on surfaces. Finally, as a consequence of this project, the methodology used for decontamination could be used to improve future contamination scenarios by eliminating or reducing contaminant hazards, thereby allowing equipment and/or facilities, previously unusable, to be reclaimed rather than discarded, resulting in an overall cost savings to the customer.

36 MATERIALS SCIENCE↗

Microstructural study and densification analysis of hot work tool steel matrix composites reinforced with TiB{sub 2} particles

Hot work tool steels are characterized by good toughness and high hot hardness but are less wear resistant than other tooling materials, such as high speed steel. Metal matrix composites show improved tribological behavior, but not much work has been done in the field of hot work tool steels. In this paper TiB{sub 2}-reinforced hot work tool steel matrix composites were produced by spark plasma sintering (SPS). Mechanical alloying (MA) was proposed as a suited process to improve the composite microstructure. Density measurements and microstructure confirmed that MA promotes sintering and produces a fine and homogeneous dispersion of reinforcing particles. X-ray diffraction patterns of the sintered composites highlighted the formation of equilibrium Fe{sub 2}B and TiC, as predicted by thermodynamic calculations using Thermo-Calc® software. Scanning electron microscopy as well as scanning Kelvin probe force microscopy highlighted the reaction of the steel matrix with TiB{sub 2} particles, showing the formation of a reaction layer at the TiB{sub 2}-steel interface. Phase investigations pointed out that TiB{sub 2} is not chemically stable in steel matrix because of the presence of carbon even during short time SPS. - Highlights: • TiB{sub 2} reinforced steel matrix composites were produced by spark plasma sintering. • TiB{sub 2} was successfully dispersed in the steel matrix by mechanical alloying. • Steel and TiB{sub 2} react during sintering forming equilibrium Fe{sub 2}B and TiC. • The new phases were investigated by means of AFM, Volta potential and XRD analyses.

36 MATERIALS SCIENCE↗

Nano-crystalline p-ZnGa{sub 2}Te{sub 4}/n-Si as a new heterojunction diode

Graphical abstract: Display Omitted Highlights: ► ZnGa{sub 2}Te{sub 4}/Si thin film was prepared by thermal evaporation technique. ► XRD and AFM graphs support the nano-crystalline of the studied device. ► Dark current–voltage characteristics of the heterojunction diode were investigated. ► Electrical parameters and conduction mechanism were determined. ► Conduction mechanisms were controlled by TE, SCLC and TCLC. -- Abstract: In this communication, ZnGa{sub 2}Te{sub 4} thin film was prepared by thermal evaporation technique on n-Si substrate. P-ZnGa{sub 2}Te{sub 4}/n-Si heterojunction diode was fabricated. The structure of ZnGa{sub 2}Te{sub 4} thin film was checked by XRD pattern and confirmed by AFM micrographs. The dark current–voltage characteristics of the heterojunction diode were investigated to determine the electrical parameters and conduction mechanism as a function of forward and reverse biasing conditions in the range (−10 V to 10 V) at temperature interval (303–423 K). The conduction mechanism was controlled by thermionic emission, space charge limited (SCLC) and trap-charge limited current (TCLC) mechanisms. The basic parameters such as the series resistance R{sub s}, the shunt resistance R{sub sh}, the ideality factor n and the barrier height φ{sub b} of the diode, the total density of trap states N{sub 0} and the exponential trapping distribution P{sub o} were determined. The obtained results showed that ZnGa{sub 2}Te{sub 4} is a good candidate for the applications of electronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructure, precipitates and hardness of selectively laser melted AlSi10Mg alloy before and after heat treatment

Highlights: • Microstructural characterization of SLM AlSi10Mg alloy and comparison with cast and powder AlSi10Mg • Effect of solution heat treatment and aging on the hardness change of SLM AlSi10Mg alloy • Evolution of strengthening precipitates and Fe-rich intermetallics in SLM AlSi10Mg during heat treatment - Abstract: The microstructure and precipitates within selectively laser melted (SLM) AlSi10Mg alloys in the as-built state and after T6 heat treatment were examined and correlated to the hardness evolution. The as-built alloy exhibited columnar patterns perpendicular to the build-direction and fish-scale pattern along the build-direction originating from the melt pool. The microstructure consisted of fine Al cells and eutectic structure with up to 4 μm in size. Tiny needle-like Si particles with highly faulted structure were identified within the Al cells and formed semi-coherent interface with the matrix. Nanoscale Si particles and π-Al{sub 8}Si{sub 6}Mg{sub 3}Fe phase were observed to segregate along the cell and grain boundary. Solution heat treatment (SHT) at 520 °C resulted in the dissolution of Al cellular microstructure. Precipitation and coarsening of the Si particles occurred, while the aspect ratio of Si particles remained nearly constant. The π-Al{sub 8}Si{sub 6}Mg{sub 3}Fe phase decomposed into plate-shaped β-Al{sub 5}SiFe. The artificial aging (AA) at 160 °C did not alter the microstructure but led to the formation of metastable Mg{sub 2}Si precipitates. The GP zones and β″ were identified through transmission electron microscopy after AA of 6 h, and β″ existed up to AA of 24 h. The hardness decreased after SHT due to the coarsening of the microstructure and reduced solid solution hardening. Hardness reached maximum magnitude after AA of 6–10 h due to the precipitation hardening, and remained relatively unchanged up to AA of 24 h. Microstructure and/or hardness of gas atomized powders and bulk cast AlSi10Mg alloys were also examined as references.

36 MATERIALS SCIENCE↗

Adsorption and diffusion of Ru adatoms on Ru(0001)-supported graphene: Large-scale first-principles calculations

Large-scale first-principles density functional theory calculations are performed to investigate the adsorption and diffusion of Ru adatoms on monolayer graphene (G) supported on Ru(0001). The G sheet exhibits a periodic moiré-cell superstructure due to lattice mismatch. Within a moiré cell, there are three distinct regions: fcc, hcp, and mound, in which the C{sub 6}-ring center is above a fcc site, a hcp site, and a surface Ru atom of Ru(0001), respectively. The adsorption energy of a Ru adatom is evaluated at specific sites in these distinct regions. We find the strongest binding at an adsorption site above a C atom in the fcc region, next strongest in the hcp region, then the fcc-hcp boundary (ridge) between these regions, and the weakest binding in the mound region. Behavior is similar to that observed from small-unit-cell calculations of Habenicht et al. [Top. Catal. 57, 69 (2014)], which differ from previous large-scale calculations. We determine the minimum-energy path for local diffusion near the center of the fcc region and obtain a local diffusion barrier of ∼0.48 eV. We also estimate a significantly lower local diffusion barrier in the ridge region. These barriers and information on the adsorption energy variation facilitate development of a realistic model for the global potential energy surface for Ru adatoms. This in turn enables simulation studies elucidating diffusion-mediated directed-assembly of Ru nanoclusters during deposition of Ru on G/Ru(0001)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental observation of the interaction of propagating spin waves with Néel domain walls in a Landau domain structure

The interaction of propagating dipolar spin waves with magnetic domain walls is investigated in square-shaped microstructures patterned from the Heusler compound Co{sub 2}Mn{sub 0.6}Fe{sub 0.4}Si. Using magnetic force microscopy, the reversible preparation of a Landau state with four magnetic domains separated by Néel domain walls is confirmed. A local spin-wave excitation using a microstructured antenna is realized in one of the domains. It is shown by Brillouin light scattering microscopy that the domain structure in the remanence state has a strong influence on the spin-wave excitation and propagation. The domain walls strongly reflect the spin waves and can be used as spin-wave reflectors. A comparison with micromagnetic simulations shows that the strong reflection is due to the long-range dipolar interaction which has important implications for the use of these spin waves for exerting an all-magnonic spin-transfer torque.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Entanglement and local extremes at an infinite-order quantum phase transition

The characterization of an infinite-order quantum phase transition (QPT) by entanglement measures is analyzed. To this aim, we consider two closely related solvable spin-1/2 chains, namely, the Ashkin-Teller and the staggered XXZ models. These systems display a distinct pattern of eigenstates but exhibit the same thermodynamics, that is, the same energy spectrum. By performing exact diagonalization, we investigate the behavior of pairwise and block entanglement in the ground state of both models. In contrast with the XXZ chain, we show that pairwise entanglement fails in the characterization of the infinite-order QPT in the Ashkin-Teller model, although it can be achieved by analyzing the distance of the pair state from the separability boundary. Concerning block entanglement, we show that both XXZ and Ashkin-Teller models exhibit identical von Neumann entropies as long as a suitable choice of blocks is performed. Entanglement entropy is then shown to be able to identify the quantum phase diagram, even though its local extremes (either maximum or minimum) may also appear in the absence of any infinite-order QPT.

36 MATERIALS SCIENCE↗

Dissociative Chemisorption and Oxidation of H 2 on the Stoichiometric IrO 2 (110) Surface

In this work, we investigated the dissociative chemisorption and oxidation of H 2 and D 2 on the stoichiometric IrO 2 (110) surface (“s-IrO 2 (110)”) using temperature programmed reaction spectroscopy (TPRS) and density functional theory (DFT) calculations. We find that the dissociative chemisorption of hydrogen occurs efficiently on s-IrO 2 (110) during adsorption at 90 K, with ~90% of the dissociated H 2 oxidizing to H 2 O during TPRS and evolving in a broad feature between 400 and 800 K. We also observe small quantities of H 2 desorbing in TPRS peaks at 200 K and 530 K, and show that these peaks arise from the desorption of molecularly-adsorbed H 2 and the recombination of atomic hydrogen, respectively. Our results demonstrate that H 2 dissociation on s-IrO 2 (110) occurs by a precursor-mediated mechanism wherein H 2 molecules adsorb strongly on coordinatively-unsaturated Ir atoms (Ircus) and the resulting σ-complexes then serve as precursors for H 2 bond cleavage. Our DFT calculations predict that H 2 adsorbs strongly on an atop-Ircus site, and that the H 2 complex can dissociate by a facile pathway involving H-transfer to a neighboring bridging O atom (Obr) to produce an H-Ircus/HObr pair. For this pathway, we predict that the energy barrier for dissociation is ~65 kJ/mol lower than the binding energy of the adsorbed H 2 complex. We also find that the total hydrogen uptake on s-IrO 2 (110) saturates at an H 2 coverage of ~0.65 ML during adsorption at 90 K, and present evidence that this limited uptake results from a strong influence of HObr groups on H 2 sigma-complex formation. Finally, we used DFT to examine pathways for H 2 O formation on s-IrO 2 (110) and find that steps leading directly to H 2 O formation are energetically demanding and likely determine the overall rate of H 2 oxidation on s-IrO 2 (110).

Dissociative Chemisorption↗