Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

ENERGY DISPERSIVE DIFFRACTION TOMOGRAPHY OF SHARK VERTEBRAL CENTRA

Shark vertebrae and their centra (vertebral bodies) are high-performance structures able to survive millions of cycles of high amplitude strain despite lacking a repair mechanism for accumulating damage. Shark centra consist of mineralized cartilage, a biocomposite of bioapatite (bAp), and collagen, and the nanocrystalline bAp's contribution to functionality remains largely uninvestigated. Using the multiple detector energy-dispersive diffraction (EDD) system at 6-BM-B, the Advanced Photon Source, and 3D tomographic sampling, the 3D functionality of entire centra were probed. Immersion in ethanol vs phosphate-buffered saline produces only small changes in bAp d-spacing within a great hammerhead centrum. EDD mapping under in situ loading was performed an entire blue shark centrum, and 3D maps of bAp strain showed the two structural zones of the centrum, the corpus calcareum and intermedialia, contained opposite-signed strains approaching 0.5%, and application of similar to 8% nominal strain did not alter these strain magnitudes and their spatial distribution.

Park, Jun-Sang↗

Influence of Noise-Generating Factors on Cross-Correlation Electron Backscatter Diffraction (EBSD) Measurement of Geometrically Necessary Dislocations (GNDs)

Abstract Studies of dislocation density evolution are fundamental to improved understanding in various areas of deformation mechanics. Recent advances in cross-correlation techniques, applied to electron backscatter diffraction (EBSD) data have particularly shed light on geometrically necessary dislocation (GND) behavior. However, the framework is relatively computationally expensive—patterns are typically saved from the EBSD scan and analyzed offline. A better understanding of the impact of EBSD pattern degradation, such as binning, compression, and various forms of noise, is vital to enable optimization of rapid and low-cost GND analysis. This paper tackles the problem by setting up a set of simulated patterns that mimic real patterns corresponding to a known GND field. The patterns are subsequently degraded in terms of resolution and noise, and the GND densities calculated from the degraded patterns using cross-correlation ESBD are compared with the known values. Some confirmation of validity of the computational degradation of patterns by considering real pattern degradation is also undertaken. The results demonstrate that the EBSD technique is not particularly sensitive to lower levels of binning and image compression, but the precision is sensitive to Poisson-type noise. Some insight is also gained concerning effects of mixed patterns at a grain boundary on measured GND content.

Materials Science↗

Modulating Electron Beam–Sample Interactions in Imaging and Diffraction Modes by Dose Fractionation with Low Dose Rates

Abstract Technological opportunities are explored to enhance detection schemes in transmission electron microscopy (TEM) that build on the detection of single-electron scattering events across the typical spectrum of interdisciplinary applications. They range from imaging with high spatiotemporal resolution to diffraction experiments at the window to quantum mechanics, where the wave-particle dualism of single electrons is evident. At the ultimate detection limit, where isolated electrons are delivered to interact with solids, we find that the beam current dominates damage processes instead of the deposited electron charge, which can be exploited to modify electron beam-induced sample alterations. The results are explained by assuming that all electron scattering are inelastic and include phonon excitation that can hardly be distinguished from elastic electron scattering. Consequently, a coherence length and a related coherence time exist that reflect the interaction of the electron with the sample and change linearly with energy loss. Phonon excitations are of small energy (<100 meV), but they occur frequently and scale with beam current in the irradiated area, which is why we can detect their contribution to beam-induced sample alterations and damage.

47 OTHER INSTRUMENTATION↗

Far-Field High-Energy Diffraction Microscopy: A Non-Destructive Tool for Characterizing the Microstructure and Micromechanical State of Polycrystalline Materials

A suite of non-destructive, three-dimensional X-ray microscopy techniques have recently been developed and used to characterize the microstructures of polycrystalline materials. These techniques utilize high-energy synchrotron radiation and include near-field and far-field diffraction microscopy (NF- and FF-HEDM, respectively) and absorption tomography. Several compatible sample environments have also been developed, enabling a wide range of 3D studies of material evolution. In this article, the FF-HEDM technique is described in detail, including its implementation at the 1-ID beamline of the Advanced Photon Source. Examples of how the information obtained from FF-HEDM can be used to deepen our understanding of structure-property-processing relationships in selected materials are presented.

36 MATERIALS SCIENCE↗

Parts per Million Powder X-ray Diffraction

Here in this paper we demonstrate the use of second harmonic generation (SHG) microscopy-guided synchrotron powder X-ray diffraction (PXRD) for the detection of trace crystalline active pharmaceutical ingredients in a common polymer blend. The combined instrument is capable of detecting 100 ppm crystalline ritonavir in an amorphous hydroxypropyl methylcellulose matrix with a high signal-to-noise ratio (>5000). The high spatial resolution afforded by SHG microscopy allows for the use of a minibeam collimator to reduce the total volume of material probed by synchrotron PXRD. The reduction in probed volume results in reduced background from amorphous material. The ability to detect low crystalline loading has the potential to improve measurements in the formulation pipeline for pharmaceutical solid dispersions, for which even trace quantities of crystalline active ingredients can negatively impact the stability and bioavailability of the final drug product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CaCO 3 Crystallite Evolution during CaO Carbonation: Critical Crystallite Size and Rate Constant Measurement by In-Situ Synchrotron Radiation X-ray Powder Diffraction

In this work, the evolution of the CaCO 3 crystalline phase during the CaO–CO 2 reaction was investigated by means of in situ synchrotron radiation X-ray powder diffraction performed at the Advanced Photon Source (APS) facilities of the Argonne National Laboratory. CO 2 absorption experiments were carried out in a high temperature reaction capillary with a controlled atmosphere of pure carbon dioxide (CO 2 partial pressure of 1 bar) and in the temperature range between 450 and 750 °C, using CaO-based sorbents obtained by calcination of commercial calcium carbonate. The Rietveld refinement method was applied to estimate the average size of the CaCO 3 crystallites formed during a carbonation time of 20 min, as a function of the carbonation temperature and of the initial calcination conditions. Local maxima were observed in the CaCO 3 crystallite size versus time curves and were identified as the critical CaCO 3 crystallite sizes, marking the transition between the first fast carbonation stage and the second reaction stage controlled by product-layer diffusion. A relationship between this parameter and the reaction temperature, as well as with the initial (at the beginning of carbonation) CaO crystallite size, were found. The CaCO 3 critical crystallite sizes were used to estimate the active surface areas of the CaO sorbent particles where CaCO 3 crystals form and grow. Here, the computed active surface areas were utilized to calculate the kinetic parameters of the surface carbonation reaction: a reaction rate constant of 4.41 × 10 –4 mol/m 2 s, with zero-activation energy, was obtained.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanisms Determining the Structure of Gold-Catalyzed GaAs Nanowires Studied by in Situ X-ray Diffraction

The evolution of polytypism during GaAs nanowire growth was investigated with in situ X-ray diffraction. The growth of nanowires was found to start with the formation of zincblende structure, followed by the growth of wurtzite structure. The growth process was well reproduced by a simulation based on a layer-by-layer nucleation model. The good agreement between the measured and simulated results confirms that nucleation costs higher energy for the stackings changing the crystal structure than for those conserving the preceding structure. The transition in prevalent structure can be accounted for by the change of local growth conditions related to the shape of triple phase line rather than by the change in supersaturation level, which quickly reaches steady state after starting growth.

36 MATERIALS SCIENCE↗

Modified Oxygen Defect Chemistry at Transition Metal Oxide Heterostructures Probed by Hard X-ray Photoelectron Spectroscopy and X-ray Diffraction

Transition metal oxide hetero-structures are interesting due to the distinctly different properties that can arise from their interfaces, such as superconductivity, high catalytic activity and magnetism. Oxygen point defects can play an important role at these interfaces in inducing potentially novel properties. The design of oxide hetero-structures in which the oxygen defects are manipulated to attain specific functionalities requires the ability to resolve the state and concentration of local oxygen defects across buried interfaces. In this work, we utilized a novel combination of hard x-ray photoelectron spectroscopy (HAXPES) and high resolution xray diffraction (HRXRD) to probe the local oxygen defect distribution across the buried interfaces of oxide heterolayers. This approach provides a non-destructive way to qualitatively probe locally the oxygen defects in transition metal oxide hetero-structures. We studied two trilayer structures as model systems - the La 0.8 Sr 0.2 CoO 3-δ /(La 0.5 Sr 0.5 ) 2 CoO 4 /La 0.8 Sr 0.2 CoO 3-δ (LSC 113 /LSC 214 ) and the La 0.8 Sr 0.2 CoO 3-δ /La 2 NiO 4+δ /La 0.8 Sr 0.2 CoO 3-δ (LSC 113 /LNO 214 ) on SrTiO 3 (001) single crystal substrates. We found that the oxygen defect chemistry of these transition metal oxides was strongly impacted by the presence of interfaces and the properties of the adjacent phases. Under reducing conditions, the LSC 113 in the LSC 113 /LNO 214 tri-layer had less oxygen vacancies than the LSC 113 in the LSC 113 /LSC 214 tri-layer and the LSC 113 single phase film. On the other hand, LSC 214 and LNO 214 were more reduced in the two tri-layer structures when in contact with the LSC 113 layer compared to their single phase counterparts. Furthermore, the results point out a potential way to modify the local oxygen defect states at oxide hetero-interfaces.

36 MATERIALS SCIENCE↗

Metastable Li 1+δ Mn 2 O 4 (0 ≤ δ ≤ 1) Spinel Phases Revealed by in Operando Neutron Diffraction and First-Principles Calculations

Here, we examine the reaction mechanisms driven by the lithiation of Li 1+δ Mn 2 O 4 (0 ≤ δ ≤ 1) spinels via in operando neutron powder diffraction (NPD). New reaction mechanisms are proposed involving solid-solution regions within both cubic and tetragonal spinel phases in addition to a continuous phase transition between them. In operando NPD is an ideal tool to follow the light elements such as lithium and oxygen in cathode materials which are often the key to fully understand their structural evolutions. Here, we report a novel methodology to prepare an extremely thick electrode with ~378 mg·cm –2 loading density suitable for the in operando NPD studies. Enabled by such thick electrode, we find that the metal oxygen M–O (M = Li and Mn) bond lengths in both end members LiMn 2 O 4 and Li 2 Mn 2 O 4 experience pronounced changes larger than dictated by the change in lattice parameters because of the locally formed Jahn–Teller distorted Mn 3+ . First-principles density functional theory calculations confirm these metastable intermediates and further propose atomistic reaction pathways for the phase transition by coupling a global structure search algorithm. In conclusion, these findings redefine the conventional understandings on two-phase reactions of this spinel material.

36 MATERIALS SCIENCE↗

Structure and Thermal Stability of (H 2 O) 4 Tetrahedron and (H 2 O) 6 Hexagon Adsorbed on NaY Zeolite Studied by Synchrotron-Based Time-Resolved X-ray Diffraction

Water adsorption and desorption features play an important role in determining the adsorptive and catalytic properties of zeolites. In this study, the extraframework structure (water and cations) in NaY faujasite zeolite was studied by synchrotron-based in situ time-resolved X-ray diffraction (TR-XRD) in combination with the Rietveld refinement method. It was observed that Na cations locating at different sites migrated between each other during the dehydration process. Water molecules at three separate sites showed interesting geometries: (H 2 O) 4 tetrahedron W1, (H 2 O) 6 ice-like hexagonal W2, and disordered triangle W3. Interactions between each form of water and Na cations were deeply investigated. Here, the stability of the waters followed the sequence of W1 > W3 > W2. This work provides insights into both framework structure and cation positions of model zeolite under actual working conditions, which helps fully understand the properties of zeolites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogen Purification in Palladium-Based Membranes: An Operando X-ray Diffraction Study

Palladium (Pd)-based membranes are highly selective to H 2 , compact, and operationally flexible, and they could facilitate efficient and on-demand production of H 2 as a clean energy carrier. For the first time, we designed an operando X-ray diffraction (XRD) experiment to study a dense Pd membrane during H 2 permeation at typical operating conditions (e.g., 280–440 °C and 1–3 bar pressure difference). By correlating the lattice structure of a metallic membrane with its gas-separation performance in real time, the operando XRD experiment could serve as a diagnostic tool for research on high-temperature gas-separation membranes. As a proof-of-concept study, we simultaneously collected H 2 -flux and transmission-XRD measurements, from which we calculated key hydrogen-transport properties, including permeability, solubility, and diffusivity. We also showed that the Pd lattice remained in the α phase throughout the operating conditions investigated. Furthermore these results are in reasonable agreement with the literature.

36 MATERIALS SCIENCE↗

Structural Correlation to Piezoelectric and Ferroelectric Mechanisms in Rhombohedral Pb(Zr,Ti)O 3 Ceramics by in-Situ Synchrotron Diffraction

Here, the evidence of fundamental lattice strain and domain switching contribution to the piezoelectric and ferroelectric responses of ceramics has been well studied, while the contribution from crystal structure variation has been rarely reported in terms of the existence of intergranular stress/strain and crystallographic texture. In the present study, the detailed electric field induced structure evolution in rhombohedral PbZr 0.55 Ti 0.45 O 3 (PZT55) has been investigated by in-situ high-energy synchrotron diffraction. The phase of PZT55 is stable in the rhombohedral one against bipolar electrical loading. It is interesting to find that both spontaneous polarization and unit cell volume exhibit a butterfly shape in response to electric field. Direct evidence has revealed that the lattice strain and volume expansion show similar variation tendency to the piezoelectric response in the rhombohedral PZT55. The macro-polarization of PZT55 derives from the combination of domain switching and spontaneous polarization change.

36 MATERIALS SCIENCE↗

Dehydration of UO 2 Cl 2 ·3H 2 O and Nd(NO 3 ) 3 ·6H 2 O with a Soft Donor Ligand and Comparison of Their Interactions through X-ray Diffraction and Theoretical Investigation [plus Supplemental Information]

Herein we investigated whether the relatively Lewis basic imidazole-2-thiones could be used to substitute water ligands bound to f-element cations and generate f-element soft donor complexes. Reactions of 1,3-diethylimidazole-2-thione (C 2 C 2 ImT) with Nd(NO 3 ) 3 ·6H 2 O and UO 2 Cl 2 ·3H 2 O led to the isolation of the anhydrous thione complexes Nd(NO 3 ) 3 (C 2 C 2 ImT) 3 and UO 2 Cl 2 (C 2 C 2 ImT) 2 , characterized by single crystal X-ray diffraction. Differences in the strength of metal–thione interactions have been examined by means of the crystal structure analysis and density functional theory (DFT) calculations. The C 2 C 2 ImT ligands were found to be affected by both coordination and noncovalent interactions, making it impossible to deconvolute the effects of one from the other. Calculated partial atomic charges indicated greater ligand-to-metal charge transfer in the [UO 2 ] 2+ complex, indicative of a stronger interaction. The reactivity of C 2 C 2 ImT demonstrates its usefulness in the preparation of f-element soft donor complexes from readily available hydrates that could be useful intermediates for promoting the coordination and studying the effects of soft donor anions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Situ High-Temperature Synchrotron Diffraction Studies of (Fe,Cr,Al) 3 O 4 Spinels

The modeling of a loss-of-coolant-accident scenario involving nuclear fuels with FeCrAl cladding materials in consideration to replace a Zircaloy requires knowledge of the thermodynamics of oxidized structures. At temperatures higher than 1500 degrees C, oxidation of FeCrAl alloys forms (Fe,Cr,Al) 3 O 4 spinels. In situ high-energy X-ray diffraction in a conical nozzle levitator installed at beamline 6-ID-D of the APS was used to study the structural evolution of the oxides as a function of the temperature. Single-phase (spinel) and multiphase (spinel-corundum-FeAlO 3 ) regions are mapped as a function of the temperature for three different compositions of FeCrAl oxidation products. The thermal expansion coefficients and cation distribution in the spinel structure have been refined. The temperature at which complete melting of the fuel cladding is expected has been determined by the liquidus temperatures of the oxidized products to be between 1657 and 1834 degrees C in a 20% O 2 /Ar atmosphere using the cooling trace method. The liquidus temperature increases with increasing Al and Cr content in the spinel phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Water Structure and Dynamics in Smectites: X-ray Diffraction and 2 H NMR Spectroscopy of Mg–, Ca–, Sr–, Na–, Cs–, and Pb–Hectorite

Variable-temperature X-ray diffraction and 2 H NMR spectroscopy of the smectite mineral, hectorite, containing interlayer Na + , K + , Cs + , Mg 2+ , Ca 2+ , Sr 2+ , and Pb 2+ equilibrated at 43% relative humidity (RH) and mixed with 2 H 2 O to form a paste provide a comprehensive picture of the structural environments and dynamics of interlayer 2 H 2 O and the relationships of these properties to interlayer hydration state, the hydration energy and polarizability of the cation, temperature, and the formation of ice-1h in the interparticle pores. The variation in basal spacing shown by the XRD data correlates well with the 2 H NMR behavior, and the XRD data show for the first time in hectorites that crystallization of interparticle ice-1h causes a decrease in the interlayer spacing, likely due to removal of interlayer 2 H 2 O. Here, the variation of the 2 H NMR behavior of all the samples with decreasing temperature reflects decreasing frequencies of motion for the rotation of the 2 H 2 O molecules around their dipoles, reorientation of the 2 H 2 O molecules, and exchange of the 2 H 2 O molecules between interlayer sites coordinated to and not coordinated to the cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

X-ray Diffraction, Lattice Structure, and Equation of State of PdH x and PdD x to Megabar Pressures

High-pressure X-ray diffraction of PdH x and PdD x demonstrates that these materials remain in a face-centered cubic (fcc, $Fm\bar{3m}$) structure to megabar pressures at room temperature. The volumes indicate stoichiometric compositions under pressure with x = 1 for both materials. No indication of any phase transition was observed up to the highest pressures reached in the experiments. A third-order Birch–Murnaghan equation of state used to fit the pressure–volume data gives V 0 = 10.73 (±0.03) cm 3 /mol, K 0 = 147 (±11) GPa, and K 0 ' = 4.7 (±0.5), whereas a Vinet fit gives V 0 = 10.74 (±0.03) cm 3 /mol, K 0 = 143 (±11) GPa, and K 0 ' = 5.1 (±0.5), for the combined data for both PdH x and PdD x . Here, the results are used to obtain the pressure dependence of the effective volume of H and D atoms in PdH x and PdD x to megabar pressures for comparison with other simple hydrides with implications for superconductivity in this class of materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗