Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamic linear model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Ten-moment fluid modeling of the Weibel instability

We investigate the one-dimensional non-relativistic Weibel instability through the capture of anisotropic pressure tensor dynamics using an implicit 10-moment fluid model that employs the electromagnetic Darwin approximation. The results obtained from the 10-moment model are compared with an implicit particle-in-cell simulation. The linear growth rates obtained from the numerical simulations are in good agreement with the theoretical fluid and kinetic dispersion relations. The fluid dispersion relations are derived using Maxwell’s equations and the Darwin approximation. We also show that the magnetohydrodynamic approximation can be used to model the Weibel instability if one accounts for an anisotropic pressure tensor and unsteady terms in the generalised Ohm’s law. In addition, we develop a preliminary theory for the saturation magnetic field strength of the Weibel instability, showing good agreement with the numerical results.

Kuldinow, D. A. (ORCID:0000000319730196)↗

Benchmark calculations of radiative forcing by greenhouse gases

Changes in concentrations of greenhouse gases lead to changes in radiative fluxes throughout the atmosphere. The value of this change, the instantaneous radiative forcing, varies across climate models, due partly to differences in the distribution of clouds, humidity, and temperature across models, and partly due to errors introduced by approximate treatments of radiative transfer. This paper describes an experiment within the Radiative Forcing Model Intercomparision Project that uses benchmark calculations made with line–by–line models to identify parameterization error in the representation of absorption and emission by greenhouse gases. Clear–sky instantaneous forcing by greenhouse gases is computed using a set of 100 profiles, selected from a re–analysis of present–day conditions, that represent the global annual mean forcing from pre–industrial times to the present–day with sampling errors of less than 0.01 W m –2 . Six contributing line–by–line models agree in their estimate of this forcing to within 0.025 W m –2 while even recently–developed parameterizations have typical errors four or more times larger, suggesting both that the samples reveal true differences among line–by–line models and that parameterization error will be readily identifiable. Agreement among line–by–line models is better in the longwave than in the shortwave where differing treatments of the water vapor vapor continuum affect estimates of forcing by carbon dioxide and methane. The impacts of clouds on instantaneous radiative forcing are estimated from climate model simulations. Here, the adjustment due to stratospheric temperature change by assuming fixed dynamical heating. Adjustments are large only for ozone and for carbon dioxide, for which stratospheric cooling introduces modest non–linearity.

54 ENVIRONMENTAL SCIENCES↗

A Possible Interpretation of Dark Energy and Matter of the Expanding Universe

At present the expanding universe is observed to be dominated by the not fully understood concepts of dark energy and matter, in a conceived almost flat Euclidian geometry. As one of the possible efforts to understand its global behaviour, the present paper attempts to explain these concepts in terms of the pressure force and gravity of a spherical photon gas cloud of zero point energy, in flat geometry. A difficult point concerns the frequency distribution of the zero point energy oscillations which leads to the unacceptable result of an infinite total energy. A modification of this distribution is therefore proposed which results in finite energy density. A corresponding equilibrium is investigated, as well as small dynamic deviations from it, to form a basis for a model of the expanding universe. Provided that the crucial points of the present approach hold true, the model satisfies the requirements of cosmic linear dimensions, results in an estimated acceleration of the expansion being of the order of the observed one, presents a possible solution of the coincidence problem of dark energy and matter, and provides one of the possible explanations of the observed excess of high-energy electrons and positrons in recent balloon and satellite experiments.

79 ASTRONOMY AND ASTROPHYSICS↗

Curvature effect on tearing modes in presence of neoclassical friction

Neoclassical physics (here associated to the poloidal variation of the magnetic field strength along field lines in a tokamak) is well known for driving self-generated plasma current and nonlinear magnetic islands associated to it in high performance, ITER relevant plasma discharges. It is demonstrated that the neoclassical friction between a magnetic perturbation and plasma flow already impacts magnetic islands in the linear regime, by inducing a weakening of curvature stabilization for tearing modes. This conclusion holds in particular for regimes where convection is influencing the pressure dynamics, as shown using a simple analytical model and confirmed in full Magneto-Hydro-Dynamics simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Vibrational coherences in charge-transfer dyes: A non-adiabatic picture

Essential-state models efficiently describe linear and nonlinear spectral properties of different families of charge-transfer chromophores. Here, the essential-state machinery is applied to the calculation of the early-stage dynamics after ultrafast (coherent) excitation of polar and quadrupolar chromophores. The fully non-adiabatic treatment of coupled electronic and vibrational motion allows for a reliable description of the dynamics of these intriguing systems. In particular, the proposed approach is reliable even when the adiabatic and harmonic approximations do not apply, such as for quadrupolar dyes that show a multistable, broken-symmetry excited state. Our approach quite naturally leads to a clear picture for a dynamical Jahn-Teller effect in these systems. The recovery of symmetry due to dynamical effects is however disrupted in polar solvents where a static symmetry lowering is observed. More generally, thermal disorder in polar solvents is responsible for dephasing phenomena, damping the coherent oscillations with particularly important effects in the case of polar dyes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SOLAR PHOTOIONIZATION RATES FOR INTERSTELLAR NEUTRALS IN THE INNER HELIOSPHERE: H, He, O, AND Ne

Extreme UV (EUV) spectra from the Thermosphere Ionosphere Mesosphere Energetics and Dynamics (TIMED)/Solar EUV Experiment are used to infer photoionization rates in the inner heliosphere. Relating these rates to various proxies describing the solar EUV radiation, we construct a multi-linear model which allows us to extrapolate ionization rates back to periods when no routine measurements of the solar EUV spectral distribution have been available. Such information is important, e.g., for comparing conditions of the interstellar neutral particles in the inner heliosphere at the time of Ulysses/GAS observations with conditions during the more recent observations of the Interstellar Boundary Explorer. From a period of 11 yr when detailed spectra from both TIMED and three proxies—Solar and Heliospheric Observatory/CELIAS/SEM-rates, F10.7 radio flux, and Mg II core-to-wing indices—have been available, we conclude that the simple model is able to reproduce the photoionization rates with an uncertainty of typically 5%.

79 ASTRONOMY AND ASTROPHYSICS↗

Magnetorotational dynamo can generate large-scale vertical magnetic fields in 3D GRMHD simulations of accreting black holes

ABSTRACT Jetted astrophysical phenomena with black hole engines, including binary mergers, jetted tidal disruption events, and X-ray binaries, require a large-scale vertical magnetic field for efficient jet formation. However, a dynamo mechanism that could generate these crucial large-scale magnetic fields has not been identified and characterized. We have employed three-dimensional global general relativistic magnetohydrodynamical simulations of accretion discs to quantify, for the first time, a dynamo mechanism that generates large-scale magnetic fields. This dynamo mechanism primarily arises from the non-linear evolution of the magnetorotational instability (MRI). In this mechanism, large non-axisymmetric MRI-amplified shearing wave modes, mediated by the axisymmetric azimuthal magnetic field, generate and sustain the large-scale vertical magnetic field through their non-linear interactions. We identify the advection of magnetic loops as a crucial feature, transporting the large-scale vertical magnetic field from the outer regions to the inner regions of the accretion disc. This leads to a larger characteristic size of the, now advected, magnetic field when compared to the local disc height. We characterize the complete dynamo mechanism with two time-scales: one for the local magnetic field generation, $t_{\rm gen}$, and one for the large-scale scale advection, $t_{\rm adv}$. Whereas the dynamo we describe is non-linear, we explore the potential of linear mean field models to replicate its core features. Our findings indicate that traditional $\alpha$-dynamo models, often computed in stratified shearing box simulations, are inadequate and that the effective large-scale dynamics is better described by the shear current effects or stochastic $\alpha$-dynamos.

Astronomy & Astrophysics↗

Dynamics of flexible spinning satellites with radial wire antennas

A dynamic analysis is presented for a spin-stabilized spacecraft employing four radial wire antennas with tip masses. The satellite is modelled as a 14-degree-of-freedom system, and the linearized equations of motion are found. The lowest-order vibrational modes and natural frequencies of the gyroscopically coupled system are then determined. Because the satellite spin rate is decreased by antenna deployment, a spin-up maneuver is needed. The response of the time-varying mode equations during spin-up is found for the planar modes in terms of Bessel functions and a Struve function of order -0.25. The particular solution is expressed in various forms, including an infinite series of Bessel functions and a particularly useful asymptotic expansion. An error formula for the latter is derived, showing that it gives good accuracy. A simple approximation to the complementary function is obtained using the Wenzel-Kramers-Brillouin method, and the phase error in the approximation is shown to be small.

Longman, R. W.↗

Stability of large horizontal-axis axisymmetric wind turbines

The stability of large horizontal-axis, axisymmetric, power producing wind turbines is examined within the framework of an analytical model which includes dynamic coupling of the rotor, tower, and power generating system. The aerodynamic loading is derived from blade element theory. Stability is determined by the eigenvalues of a set of linearized constant-coefficient differential equations. All results presented are based on a 3-bladed, 300-ft diameter, 2.0-MW wind turbine. It is shown that unstable or weakly stable behavior can be caused by aerodynamic forces due to motion of the rotor blades and tower in the plane of rotation or by mechanical coupling between the rotor system and the tower.

Hirschbein, M. S.↗

On error detection in the dynamics part of primitive equation models

Rossby-Haurwitz waves have been commonly employed as initial conditions for testing the dynamics part of global atmospheric models. Difficulties arise in connection with the primitive equation (PE) model. Chao and Geller (1982) have suggested that it would be better if normal mode solutions of the linearized primitive equations would be used as initial conditions. However, tests involving normal mode conditions are not adequate for the detection of errors in the nonlinear terms. The present investigation has the objective to review the study conducted by Chao and Geller and to provide tests for the nonlinear terms.

Chao, W. C.↗

CLAES focal plane array

The Cryogenic Limb Array Etalon Spectrometer for the NASA Upper Atmospheric Research Satellite uses solid-state focal plane arrays to detect emission from the earth's atmosphere over the IR wavelength range 3.5 to 13 microns. This paper discusses the design of the focal plane detector assembly and compares calculated performance with measurements. Measurements were made of focal plane noise and responsivity as functions of frequency (2 to 500 Hz) and temperature (12 to 19 K), pixel-to-pixel and across-array crosstalk, and linearity over a dynamic range of 100,000. The measurements demonstrate that the arrays satisfy the science requirements, and that, in general, there is reasonable agreement between the measurements and the analytical model.

Roche, A. E.↗

A Stochastic Reduced-Order Model for Statistical Microstructure Descriptors Evolution

Integrated computational materials engineering (ICME) models have been a crucial building block for modern materials development, relieving heavy reliance on experiments and significantly accelerating the materials design process. However, ICME models are also computationally expensive, particularly with respect to time integration for dynamics, which hinders the ability to study statistical ensembles and thermodynamic properties of large systems for long time scales. To alleviate the computational bottleneck, we propose to model the evolution of statistical microstructure descriptors as a continuous-time stochastic process using a non-linear Langevin equation, where the probability density function (PDF) of the statistical microstructure descriptors, which are also the quantities of interests (QoIs), is modeled by the Fokker–Planck equation. In this work, we discuss how to calibrate the drift and diffusion terms of the Fokker–Planck equation from the theoretical and computational perspectives. The calibrated Fokker–Planck equation can be used as a stochastic reduced-order model to simulate the microstructure evolution of statistical microstructure descriptors PDF. Considering statistical microstructure descriptors in the microstructure evolution as QoIs, we demonstrate our proposed methodology in three integrated computational materials engineering (ICME) models: kinetic Monte Carlo, phase field, and molecular dynamics simulations.

97 MATHEMATICS AND COMPUTING↗

Prediction of hemiwicking dynamics in micropillar arrays

Dynamic hemiwicking behavior is observable in both nature and a wide range of industrial applications ranging from biomedical devices to thermal management. We present a semi-analytical modeling framework (without empirical fitting coefficients) to predict transient capillary-driven hemiwicking behavior of a liquid through a nano/microstructured surface, specifically a micropillar array. In our model framework, the liquid domain is discretized into micropillar unit cells to enable the time marching of the hemiwicking front. A simplified linear pressure drop is assumed along the hemiwicking length such that the local meniscus curvature, contact angle, and effective liquid height are determined at each time step in our transient model. This semi-analytical model is validated with experimental data from our own experiments and from published literature for different fluids. Our model predicts hemiwicking dynamics with <20% error over a broad range of micropillar geometries with height-to-pitch ratio ranging between ≈0.34 and 6.7 and diameter-to-pitch ratio in the range of ≈0.25–0.7 and without any fitting parameters. For lower diameter-to-pitch ratio data points related to sparse micropillar array arrangements, we suggest modifications to the semi-analytical model. This work sheds light on complex and dynamic solid–liquid–vapor interfacial interactions which could serve as a guide for the design of textured surfaces for wicking enhancement in multi-phase thermal and mass transport technologies and applications.

Mechanics↗

Bistable dynamics of turbulence spreading in a corrugated temperature profile

We present a new model of turbulence spreading in magnetically confined plasma. A basic question in turbulence spreading is how to sustain finite amplitude fluctuations in a stable subcritical region, where linear dissipation of the turbulence is strong? The answer to this question relies on a consistent treatment of mesoscale temperature profile corrugation and microscale turbulence. We argue that inhomogeneous mixing of the turbulence corrugates the mean temperature profile and that the temperature corrugation then induces subcritical bifurcation of the turbulence. Thus, the system will transition from a metastable “laminar” state to an absolutely stable, excited state. Incorporating spatial coupling of the locally excited turbulent regions, a front forms. This front connects the excited and laminar states and penetrates the linear stable region efficiently. Here, we argue that such bistable turbulence spreading can explain observations of hysteresis in the intensity of L-mode core turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the dynamics of equatorial forcing of climate teleconnections

A number of observational, theoretical, and modeling studies have been conducted on the remote influence of the tropics on the midlatitudes. Teleconnection in the geopotential height field between the tropics and the extratropics associated with the Southern Oscillation in the so-called Pacific-North America (PNA) pattern, has often been cited as an example of such remote influence. Simmons et al. (1983) have shown that teleconnections such as PNA may arise both from barotropic instability of the extratropical zonal flow and from tropical forcing. The present investigation is only concerned with the dynamics of the part of the atmospheric teleconnection which arises from tropical forcing. Some fundamentals of Rossby wave theory in unsheared flow are discussed along with the linear response to equatorial forcing for horizontally, sheared zonal mean flow. A global shallow-water spectral model is employed in conjunction with a theoretical analysis to show the teleconnection patterns which develop under different large-scale mean circulation conditions.

Lau, K.-M.↗

Transverse Mode Dynamics of VCSELs Through Space-Time Domain Simulation

Modeling and simulation are important to understand laser operation and to optimize and design device functions. Numerical simulation of VCSEL (Vertical Cavity Surface Emitting Lasers) has been largely based on solving time-independent Helmholtz equation or time dependent coupled mode equations. There are various advantages for choosing these approaches. However, the disadvantages are also apparent. The former cannot handle dynamical mode competition seen in VCSELs, while the latter assumes a given type and number of modes a priori. Furthermore, the microscopic physics of heterstructures and electron-hole plasma is very often represented by a few parameters such as linear gain coefficients and the linewidth enhancement factor. These are over simplification of space and frequency (wavelength) dependent gain and refractive index functions. When the space-time dynamical operation of VCSELs becomes important, these simple approximations become questionable. In this paper, we apply a recently developed model for edge-emitting lasers to a gain guided VCSEL for space-time domain simulation. This model takes into account the actual nonlinear dependence of gain and refractive index on frequency and carrier density within the frame work of the effective Bloch equations. The corresponding partial differential equations are solved directly by finite difference methods. Laser behavior with increasing pumping current is investigated in detail. Special attention is paid to the dynamical competition of the transverse modes.

Goorjian, Peter M.↗

TAILSIM Users Guide

The TAILSIM program uses a 4th order Runge-Kutta method to integrate the standard aircraft equations-of-motion (EOM). The EOM determine three translational and three rotational accelerations about the aircraft's body axis reference system. The forces and moments that drive the EOM are determined from aerodynamic coefficients, dynamic derivatives, and control inputs. Values for these terms are determined from linear interpolation of tables that are a function of parameters such as angle-of-attack and surface deflections. Buildup equations combine these terms and dimensionalize them to generate the driving total forces and moments. Features that make TAILSIM applicable to studies of tailplane stall include modeling of the reversible control System, modeling of the pilot performing a load factor and/or airspeed command task, and modeling of vertical gusts. The reversible control system dynamics can be described as two hinged masses connected by a spring. resulting in a fifth order system. The pilot model is a standard form of lead-lag with a time delay applied to an integrated pitch rate and/or airspeed error feedback. The time delay is implemented by a Pade approximation, while the commanded pitch rate is determined by a commanded load factor. Vertical gust inputs include a single 1-cosine gust and a continuous NASA Dryden gust model. These dynamic models. coupled with the use of a nonlinear database, allow the tailplane stall characteristics, elevator response, and resulting aircraft response, to be modeled. A useful output capability of the TAILSIM program is the ability to display multiple post-run plot pages to allow a quick assessment of the time history response. There are 16 plot pages currently available to the user. Each plot page displays 9 parameters. Each parameter can also be displayed individually. on a one plot-per-page format. For a more refined display of the results the program can also create files of tabulated data. which can then be used by other plotting programs. The TAILSIM program was written straightforwardly assuming the user would want to change the database tables, the buildup equations, the output parameters. and the pilot model parameters. A separate database file and input file are automatically read in by the program. The use of an include file to set up all common blocks facilitates easy changing of parameter names and array sizes.

Hiltner, Dale W.↗

Multiple surface plasmons in an unbounded quantum plasma half-space

The propagation of surface plasmons on a quantum plasma half-space in the absence of any external confinement is investigated. By means of the Quantum Hydrodynamic Model in the electrostatic limit, it is found that the equilibrium density profile is a smooth continuous function which, in the linear regime, supports multiple non-normal surface modes. Defining a spectrum function and using a cutting condition, the dispersion relations of these modes and their relevance for realistic dynamics are computed. It is found that the multiple surface plasmons present a significant red-shift with respect to the case of fully bounded quantum plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗