Search NASA⌕ Search

SEARCH · Search NASA

Results for “gradient methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Low-Lying Excited States of Linear All- Trans Polyenes: Insights from Analytic Gradient and Nonadiabatic Coupling Calculations Based on Multireference Configuration Interaction

Polyenes serve as a rigorous test for theoretical models and electronic structure methods, playing a key role in advancing computational and theoretical chemistry. Here, we present a high-level theoretical investigation of linear, all-trans polyenes using energy gradients and nonadiabatic coupling vectors based on an MR-CISD wave function to describe electronic transitions involving the ground state (1 1 A g – ) and three low-lying excited states (2 1 A g – , 1 1 B u + , and 2 1 B u – ) of hexatriene, octatetraene, and decapentaene. This approach enables accurate evaluation of both adiabatic and vertical excitation and emission energies, yielding results in excellent agreement with experiment, as well as locating minima on the crossing seam between adiabatic states. Our results show that vertical excitation energies to the 1 1 B u + state are blue-shifted by 0.2–0.3 eV relative to the experimental absorption maximum, whereas the vertical emission energy from the 2 1 A g – state is red-shifted by ∼0.2 eV relative to the experimental emission maximum. Upon relaxation from the Franck–Condon geometry, the 2 1 A g – state stabilizes by around 1 eV, compared to 0.2–0.3 eV for the 1 1 B u + state. An analysis of the S 1 /S 0 crossing seam in hexatriene shows that its minimum involves asymmetric backbone deformations and provides an efficient channel for ultrafast internal conversion to the ground state, consistent with the absence of detectable fluorescence in this molecule. These results demonstrate the power of analytic gradients and nonadiabatic coupling vectors based on an MR-CISD wave function for accurately characterizing the electronic structure and photophysics of polyenes.

Excited states↗

Generalised Primal-Dual Grids for Unstructured Co-Volume Schemes

The generation of high-quality staggered unstructured grids is considered, leading to the development of a new optimisation-based strategy designed to construct weighted 'Regular-Power' tessellations appropriate for co-volume type numerical discretisation techniques. This new framework aims to extend the conventional Delaunay-Voronoi primal-dual structure; seeking to assemble generalised orthogonal tessellations with enhanced geometric quality. The construction of these grids is motivated by the desire to improve the performance and accuracy of numerical methods based on unstructured co-volume type schemes, including various staggered grid techniques for the simulation of fluid dynamics and hyperbolic transport. In this study, a new hybrid optimisation strategy is proposed; seeking to optimise the geometry, topology and weights associated with general, two-dimensional Regular-Power tessellations using a combination of gradient-ascent and energy-based techniques. The performance of this new method is tested experimentally, with a range of complex, multi-resolution primal-dual grids generated for various coastal and regional ocean modelling applications.

power diagrams↗

Dynamics of canopy stomatal conductance, transpiration, and evaporation in a temperate deciduous forest, validated by carbonyl sulfide uptake

Abstract. Stomatal conductance influences both photosynthesis and transpiration, thereby coupling the carbon and water cycles and affecting surface–atmosphere energy exchange. The environmental response of stomatal conductance has been measured mainly on the leaf scale, and theoretical canopy models are relied on to upscale stomatal conductance for application in terrestrial ecosystem models and climate prediction. Here we estimate stomatal conductance and associated transpiration in a temperate deciduous forest directly on the canopy scale via two independent approaches: (i) from heat and water vapor exchange and (ii) from carbonyl sulfide (OCS) uptake. We use the eddy covariance method to measure the net ecosystem–atmosphere exchange of OCS, and we use a flux-gradient approach to separate canopy OCS uptake from soil OCS uptake. We find that the seasonal and diurnal patterns of canopy stomatal conductance obtained by the two approaches agree (to within ±6 % diurnally), validating both methods. Canopy stomatal conductance increases linearly with above-canopy light intensity (in contrast to the leaf scale, where stomatal conductance shows declining marginal increases) and otherwise depends only on the diffuse light fraction, the canopy-average leaf-to-air water vapor gradient, and the total leaf area. Based on stomatal conductance, we partition evapotranspiration (ET) and find that evaporation increases from 0 to 40 % of ET as the growing season progresses, driven primarily by rising soil temperature and secondarily by rainfall. Counterintuitively, evaporation peaks at the time of year when the soil is dry and the air is moist. Our method of ET partitioning avoids concerns about mismatched scales or measurement types because both ET and transpiration are derived from eddy covariance data. Neither of the two ecosystem models tested predicts the observed dynamics of evaporation or transpiration, indicating that ET partitioning such as that provided here is needed to further model development and improve our understanding of carbon and water cycling.

59 BASIC BIOLOGICAL SCIENCES↗

Evaluation of Radiography for TRISO Buffer Layer Density Measurement

Tristructural isotropic (TRISO) fuel particles consist of a central uranium-bearing kernel and a series of coating layers designed to retain fission products and to ensure fuel performance. Several parameters such as thickness and density must be measured for these coating layers to show that they conform with fuel specifications. Current methods for measuring the density of pyrolytic carbon and silicon carbide layers (liquid gradient density column) and the buffer layer (mercury porosimetry) generate Resource Conservation and Recovery Act (RCRA) radiological-mixed waste. In addition, measurement of buffer and inner pyrolytic carbon layer densities require hot sampling or interrupted coating runs and the mercury porosimetry method used for buffer density measurement only measures the mean buffer density, not the interparticle distribution. A new approach has been evaluated to measure the density of coating layers in TRISO particles based on the dependence of x-ray attenuation in radiographs on material density. This method does not generate RCRA mixed waste, measures density on a particle-by-particle basis, and in principle is capable of measuring the density of all coating layers in a single process. Initial results using thinned TRISO particle sections to evaluate radiography measurement of density as a quality control characterization method are reported herein. In this work, the primary focus is on measurement of the density of the buffer layer; however, with appropriate calibration the method should be applicable to other coating layers. Improvements to the initial method and a full demonstration of the method on the remaining coating layers may be pursued as a future effort.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Differential heating: A versatile method for thermal conductivity measurements in high-energy-density matter

We propose a method for thermal conductivity measurements of high energy density matter based on differential heating. A temperature gradient is created either by surface heating of one material or at an interface between two materials by different energy deposition. The subsequent heat conduction across the temperature gradient is observed by various time-resolved probing techniques. Conceptual designs of such measurements using laser heating, proton heating, and x-ray heating are presented. The sensitivity of the measurements to thermal conductivity is confirmed by simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

TH-C-BRD-10: An Evaluation of Three Robust Optimization Approaches in IMPT Treatment Planning

Purpose: Various robust optimization approaches have been proposed to ensure the robustness of intensity modulated proton therapy (IMPT) in the face of uncertainty. In this study, we aim to investigate the performance of three classes of robust optimization approaches regarding plan optimality and robustness. Methods: Three robust optimization models were implemented in our in-house IMPT treatment planning system: 1) L2 optimization based on worst-case dose; 2) L2 optimization based on minmax objective; and 3) L1 optimization with constraints on all uncertain doses. The first model was solved by a L-BFGS algorithm; the second was solved by a gradient projection algorithm; and the third was solved by an interior point method. One nominal scenario and eight maximum uncertainty scenarios (proton range over and under 3.5%, and setup error of 5 mm for x, y, z directions) were considered in optimization. Dosimetric measurements of optimized plans from the three approaches were compared for four prostate cancer patients retrospectively selected at our institution. Results: For the nominal scenario, all three optimization approaches yielded the same coverage to the clinical treatment volume (CTV) and the L2 worst-case approach demonstrated better rectum and bladder sparing than others. For the uncertainty scenarios, the L1 approach resulted in the most robust CTV coverage against uncertainties, while the plans from L2 worst-case were less robust than others. In addition, we observed that the number of scanning spots with positive MUs from the L2 approaches was approximately twice as many as that from the L1 approach. This indicates that L1 optimization may lead to more efficient IMPT delivery. Conclusion: Our study indicated that the L1 approach best conserved the target coverage in the face of uncertainty but its resulting OAR sparing was slightly inferior to other two approaches.

60 APPLIED LIFE SCIENCES↗

Ceramic nuclear fuel fracture modeling with the extended finite element method

Ceramic fuel pellets used in nuclear light water reactors experience significant fracture due to the high thermal gradients experienced under normal operating conditions. This has important effects on the performance of the fuel system. Because of this, a realistic, physically based fracture modeling capability is essential to predict fuel behavior in a wide variety of normal and off-normal conditions. The extended finite element method (X-FEM) is a powerful method to represent arbitrary propagating discrete cracks in finite element models, and has many characteristics that make it attractive for nuclear fuel performance analysis. This paper describes the implementation of X-FEM in a multiphysics fuel performance code and presents applications of that capability. These applications include several thermal mechanics fracture benchmark problems, which demonstrate the accuracy of this approach. It also includes application of this capability to study nuclear fuel fracture, both on stationary and propagating cracks. The study on stationary cracks shows the effects that varying the number of radial cracks and the length of those cracks have on the energy release rate. Here, the propagating crack case demonstrates random initiation and subsequent propagation of interacting thermally induced cracks during an initial ramp to full power with fresh fuel.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Comparison of characterization methods for differently atomized nickel-based alloy 625 powders

The deployment of additive manufacturing depends on the quality of the produced part, specifically the absence of internal defects, impurities and compositional gradient. In this paper, differently atomized nickel-based alloy 625 powder particles were systematically characterized with different methods and results were compared. Powder properties were studied to understand the effect of different atomization methods on the properties of the powder particles. Morphology, shape and size of water and argon atomized powders were observed using optical microscopy, scanning electron microscopy and micro-computed X-ray tomography (μCT); μCT with different resolution and sample setup. As expected, water atomized powder particles have irregular morphology in contrast to spherical gas atomized particles. Phase and elemental analysis were conducted with X-ray diffraction and energy dispersive spectroscopy; thermal properties were measured with differential scanning calorimetry. Gas atomized powder shows composition and melting temperature close to nominal bulk alloy 625. Particle size analysis was carried out using sieving, laser particle size analysis and μCT. It is found that the average particle size obtained from μCT depends on scan resolution. Additionally, porosity of the powders was observed in SEM micrographs and investigated in detail using μCT. In conclusion, μCT with higher resolution results in collecting accurate shape, size, porosity and morphology of the powder particles. Finally, considering the large number of particles that can be investigated with μCT and ability to observe internal porosity, μCT is found to be an appropriate if not superior substitution for other powder characterization methods such as optical/electron microscopies, sieving and laser particle size analysis if time of characterization is not a concern.

36 MATERIALS SCIENCE↗

A finite-difference outer layer and integral inner layer method for the solution of the turbulent boundary layer equations

A new turbulent boundary-layer method is developed which models the inner region with the law of the wall while the outer region uses Clauser's eddy viscosity in Matsuno's finite-difference method. The match point between the inner and outer regions as well as the wall shear stress are determined at each marching step during the computation. Results obtained for incompressible, two-dimensional flow over flat plates and ellipses are compared with solutions from a baseline method which uses a finite-difference method for the entire boundary layer. Since the present method used the finite-difference method in the outer region only, the number of grid points required was about half that needed for the baseline method. Accurate displacement and momentum thicknesses were predicted for all cases. Skin friction was predicted well for the flat plate, but the accuracy decreased significantly for the ellipses. Adding a wake functions to the law of the wall allows some of the pressure gradient effect to be taken into account thereby increasing the accuracy of the method.

Barnwell, R. W.↗

Minimum feature size control in level set topology optimization via density fields

A level set topology optimization approach that uses an auxiliary density field to nucleate holes during the optimization process and achieves minimum feature size control in optimized designs is explored. The level set field determines the solid-void interface and the density field describes the distribution of a fictitious porous material using the solid isotropic material with penalization. These fields are governed by two sets of independent optimization variables which are initially coupled using a penalty for hole nucleation. The strength of the density field penalization and projection is gradually increased during the optimization process to promote a 0-1 density distribution. In addition, a second penalty regulates the evolution of the density field in the void phase. The treatment of the density field combined with the second penalty mitigate the appearance of small design features. The minimum feature size of optimized designs is controlled by the radius of the linear filter applied to the density optimization variables. The structural response is predicted by the extended finite element method, the sensitivities by the adjoint method, and the optimization variables are updated by a gradient-based optimization algorithm. Numerical examples investigate the robustness of this approach with respect to algorithmic parameters and mesh refinement. The results show the applicability of the combined density level set topology optimization approach for both optimal hole nucleation and for minimum feature size control in 2D and 3D. This comes, however, at the cost of a more complex problem formulation and additional computational cost due to an increased number of optimization variables.

42 ENGINEERING↗

Topological Optimization with Big Steps

Using persistent homology to guide optimization has emerged as a novel application of topological data analysis. Existing methods treat persistence calculation as a black box and backpropagate gradients only onto the simplices involved in particular pairs. We show how the cycles and chains used in the persistence calculation can be used to prescribe gradients to larger subsets of the domain. In particular, we show that in a special case, which serves as a building block for general losses, the problem can be solved exactly in linear time. This relies on another contribution of this paper, which eliminates the need to examine a factorial number of permutations of simplices with the same value. Here, we present empirical experiments that show the practical benefits of our algorithm: the number of steps required for the optimization is reduced by an order of magnitude.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Magneto-Electronic, Thermodynamic, and Thermoelectric Properties of 5f-Electron System BaBkO{sub 3}

In the present work, the structural, electronic, magnetic, mechanical, thermodynamic, and thermoelectric properties of cubic perovskite BaBkO{sub 3} were investigated within the framework of density functional theory using generalized gradient approximation, onsite Coulomb interaction, and modified Becke-Johnson methods. BaBkO{sub 3} is stable in the ferromagnetic phase with a magnetic moment of 7 μ{sub B}. The spin-polarized electronic band structure reveals 100% spin polarization of the material with metallic character in spin-up state and semiconducting in spin-down state. Pugh and Cauchy relation displays that the material is highly ductile. The quasi-harmonic Debye model was used to determine the thermodynamic properties of BaBkO{sub 3} under high pressure and temperature. BaBkO{sub 3} presents high value of Seebeck coefficient and power factor at room temperature with a value of 135 μVK{sup − 1} and 1.5 × 10{sup 12}μWcm{sup − 1} K{sup − 2} s{sup − 1}, respectively. The possession of half metallicity and high Seebeck coefficient makes BaBkO{sub 3} suitable for spintronic and thermoelectric device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Generalized moving least squares vs. radial basis function finite difference methods for approximating surface derivatives

Approximating differential operators defined on two-dimensional surfaces is an important problem that arises in many areas of science and engineering. Over the past ten years, localized meshfree methods based on generalized moving least squares (GMLS) and radial basis function finite differences (RBF-FD) have been shown to be effective for this task as they can give high orders of accuracy at low computational cost, and they can be applied to surfaces defined only by point clouds. However, there have yet to be any studies that perform a direct comparison of these methods for approximating surface differential operators (SDOs). The first purpose of this work is to fill that gap. For this comparison, we focus on an RBF-FD method based on polyharmonic spline kernels and polynomials (PHS+Poly) since they are most closely related to the GMLS method. Additionally, we use a relatively new technique for approximating SDOs with RBF-FD called the tangent plane method since it is simpler than previous techniques and natural to use with PHS+Poly RBF-FD. Further, the second purpose of this work is to relate the tangent plane formulation of SDOs to the local coordinate formulation used in GMLS and to show that they are equivalent when the tangent space to the surface is known exactly. The final purpose is to use ideas from the GMLS SDO formulation to derive a new RBF-FD method for approximating the tangent space for a point cloud surface when it is unknown. For the numerical comparisons of the methods, we examine their convergence rates for approximating the surface gradient, divergence, and Laplacian as the point clouds are refined for various parameter choices. We also compare their efficiency in terms of accuracy per computational cost, both when including and excluding setup costs.

97 MATHEMATICS AND COMPUTING↗

Simulation of multi-shell fullerenes using Machine-Learning Gaussian Approximation Potential

Multi-shell fullerenes ”buckyonions ” were simulated, starting from initially random configurations, using a density-functional-theory (DFT)-trained machine-learning carbon potential within the Gaussian Approximation Potential (GAP) Framework [Volker L. Deringer and Gábor Csányi, Phys. Rev. B 95, 094203 (2017)]. Fullerenes formed from seven different system sizes, ranging from 60 ~ 3774 atoms, were considered. The buckyonions are formed by clustering and layering starting from the outermost shell and proceeding inward. Inter-shell cohesion is partly due to interaction between delocalized π electrons protruding into the gallery. The energies of the models were validated ex post facto using density functional codes, VASP and SIESTA , revealing an energy difference within the range of 0.02 - 0.08 eV/atom after conjugate gradient energy convergence of the models was achieved with both methods.

74 ATOMIC AND MOLECULAR PHYSICS↗

Dynamics of Glyceline and Interactions of Constituents: A Multitechnique NMR Study

In this work, the dynamics of the organic components of the deep eutectic solvent (DES) glyceline are analyzed using an array of complementary nuclear magnetic resonance (NMR) methods. Fast-Field Cycling 1 H relaxometry, Pulsed Field Gradient diffusion, Nuclear Overhauser Effect Spectroscopy (NOESY), 13 C NMR relaxation and pressure dependent NMR experiments are deployed to sample a range of frequencies and modes of motion of the glycerol and choline components of the DES. Generally, translational and rotational diffusion of glycerol are more rapid than those of choline while short range rotational motions observed from 13 C relaxation indicate slow local motion of glycerol at low choline chloride (ChCl) content. The rates of glycerol and choline local motions become more similar at higher ChCl. This result taken together with pressure dependent NMR studies show that the addition of ChCl makes it easier to disrupt glycerol packing. Finally, a relatively slow hydroxyl H-exchange process between glycerol and choline protons is deduced from the data. Consistent with this, NOESY results indicate relatively little direct H-bonding between glycerol and choline. These results suggest that the glycerol H-bonding network is disrupted as choline is added, but primarily in regions where there is intimate mixing of the two components. Thus, the local dynamics of most of the glycerol, resembles that of pure glycerol until substantial choline chloride is present.

13C NMR relaxation↗

Spin Decoherence in VOPc@graphene Nanoribbon Complexes

Carbon nanoribbons or nanographene qubit arrays can facilitate quantum-to-quantum transduction between light, charge, and spin, making them an excellent testbed for fundamental science in quantum coherent systems and for the construction of higher-level qubit circuits. Here, in this work, we study spin decoherence due to coupling with a surrounding nuclear spin bath of an electronic molecular spin of a vanadyl phthalocyanine (VOPc) molecule integrated onto an armchair-edged graphene nanoribbon (GNR). Density functional theory (DFT) is used to obtain ground-state atomic configurations. Decay of spin coherence in Hahn echo experiments is then simulated using the cluster correlation expansion method with a spin Hamiltonian involving hyperfine and electric field gradient tensors calculated from DFT. We find that the decoherence time T 2 is anisotropic with respect to magnetic field orientation and determined only by the hydrogen nuclear spins on both VOPc and GNR. Large electron spin echo envelope modulation (ESEEM) due to nitrogen and vanadium nuclear spins is present at specific field ranges and can be completely suppressed by tuning the magnetic field. The relation between these field ranges and the hyperfine interactions is analyzed. The effects of interactions with the nuclear quadrupole moments are also studied, validating the applicability and limitations of the spin Hamiltonian when they are disregarded.

Hamiltonians↗

Explainable machine learning for incipient anomaly detection in compact molten salt heat exchanger with overlapping feature distributions

High-temperature molten salt-cooled reactors (MSCRs) are a promising next-generation nuclear technology option, offering efficient power conversion and inherent safety features. However, the reliability of these systems depends on the robust operation of heat exchangers (HXs), which are susceptible to failure due to temperature gradients and channel plugging caused by fluid freezing. Conventional monitoring methods, relying on inlet and outlet measurements, lack the spatial resolution needed to detect early-stage faults. We propose a novel design of a compact salt-to-salt matrix-type HX design consisting of interleaved arrays of parallel tubes, with integrated synthetic fiber optic distributed temperature sensing (DTS) to enable localized detection of incipient faults. To evaluate performance of this design, we generate high-fidelity synthetic data using heat transfer computational modeling to simulate channel plugging, and introduce sensor noise for realistic modeling of measurements. The dataset comprises of 97% normal operation and 3% anomaly cases, with each anomaly class representing 1% of the data. These early anomalies result in overlapping temperature profiles between normal and faulty channels, producing a non-separable dataset that challenges traditional classification techniques. We benchmark eight supervised machine learning (ML) models and demonstrate that XGBoost achieves the highest performance. To improve transparency, we develop an explainability framework combining Shapley values and partially ordered sets (POSETs) to quantify and structurally analyze feature importance. This approach identifies both dominant predictors and ambiguous feature relationships, enhancing trust and interpretability. Our results highlight the potential of combining DTS and explainable ML with intelligent feature selection to improve predictive maintenance and ensure operational resilience in advanced nuclear systems.

Prantikos, Konstantinos [Argonne National Laborato↗