Search NASA⌕ Search

SEARCH · Search NASA

Results for “microstructure simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Alloying effects on deformation induced microstructure evolution in copper

In this work, we investigated the effects of alloying elements on plastic deformation and microstructure evolution in polycrystalline copper (Cu) and Cu alloyed with 1 wt. % lead (Cu-1 %Pb). These materials were selected due to the size mismatch between Cu and Pb, with the latter forming precipitates at grain boundaries. Multi-modal characterization techniques, including neutron diffraction, electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM), along with finite element simulations were employed to study the deformation behavior across multiple length scales. While both Cu and Cu-1%Pb exhibited similar macroscale response and final deformation textures, both dislocation line profile analysis and TEM revealed increased dislocation density in deformed Cu-1%Pb specimens. The presence of lead precipitates also significantly affected local plastic deformation during compression, with their influence diminishing with increasing strain. These results demonstrate the complex relationships between alloying elements, plastic deformation, microstructural evolution, and material behavior under load. The insights gained from this multi-scale and multi-technique approach contribute to the fundamental understanding of microstructural evolution in immiscible alloys and are valuable for tailoring the properties of structural materials for specific engineering applications.

36 MATERIALS SCIENCE↗

Collaborative or competitive phase transformation processes in an additively manufactured-maraging steel M300

Although retained austenite is present in minor amounts in as-built additively manufactured-maraging steels, its evolution during ageing is key to controlling the final microstructure. This study investigates the relationship between austenite reversion and precipitation evolution during ageing, particularly whether these processes compete or cooperate. Using Scanning/Transmission Electron Microscopy, Atom Probe Tomography and Thermo-Calc® PRISMA simulations, the presence and evolution of retained austenite, Ni 3 Ti and Fe 7 Mo 6 intermetallic phases was characterised across different ageing conditions. Experimental results revealed the presence of non-enriched austenite in the as-built condition. Nevertheless, with increasing ageing temperature, Ni and Mo segregation became evident. High-Resolution Transmission Electron Microscopy revealed that Ni 3 Ti precipitation primarily occurred within the martensitic matrix, while Fe 7 Mo 6 nucleated preferentially at the austenite-martensite interface. PRISMA simulations indicated early and rapid precipitation in solute-enriched areas (i.e., intercellular regions), with Ni 3 Ti forming prior to Fe 7 Mo 6 . Both experimental and simulation results suggested Ni diffusion controls retained austenite growth, while Ti and Mo drive Ni 3 Ti and Fe 7 Mo 6 precipitation, respectively. The evidence reported in this work supports a both collaborative and independent phase transformation mechanism, where austenite reversion and precipitation co-evolve.

42 ENGINEERING↗

Direct observation of the local microenvironment in inhomogeneous CO 2 reduction gas diffusion electrodes via versatile pOH imaging

In this study, we report how the micrometer-scale morphology of a carbon dioxide reduction (CO 2 R) gas diffusion electrode (GDE) affects the mass transport properties and with it, the local CO 2 R performance. We developed a technique to probe the microenvironment in a CO 2 R GDE via local pOH imaging with time- and three-dimensional spatial, micrometer-scale resolution. The local activity of hydroxide anions (OH - ), represented by the pOH value, around a GDE in contact with an aqueous electrolyte is a crucial parameter that governs the catalytic activity and CO 2 R selectivity. Here, we use fluorescence confocal laser scanning microscopy (CLSM) to create maps of the local pOH around a copper GDE by combining two ratiometric fluorescent dyes, one of which is demonstrated as a pOH sensor for the first time in this work. We observe that the local pOH decreases when current is applied due to the creation of OH - as a byproduct of CO 2 R. Interestingly, the pOH is lower inside microtrenches compared to the electrode surface and decreases further as trenches become more narrow due to enhanced trapping of OH - . We support our experimental results with multiphysics simulations that correlate exceptionally well with measurements. These simulations additionally suggest that the decreased pOH inside microcavities in the surface of a CO 2 R GDE leads to locally enhanced selectivity towards multicarbon (C 2+ ) products. This study suggests that narrow microstructures on the length scale of 5 μm in a GDE surface serve as local CO 2 R hotspots, and thus highlights the importance of a GDE's micromorphology on the CO 2 R performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Hybrid Multi-Scale Model of Crystal Plasticity for Handling Stress Concentrations

Microstructural effects become important at regions of stress concentrators such as notches, cracks and contact surfaces. A multiscale model is presented that efficiently captures microstructural details at such critical regions. The approach is based on a multiresolution mesh that includes an explicit microstructure representation at critical regions where stresses are localized. At regions farther away from the stress concentration, a reduced order model that statistically captures the effect of the microstructure is employed. The statistical model is based on a finite element representation of the orientation distribution function (ODF). As an illustrative example, we have applied the multiscaling method to compute the stress intensity factor K I around the crack tip in a wedge-opening load specimen. The approach is verified with an analytical solution within linear elasticity approximation and is then extended to allow modeling of microstructural effects on crack tip plasticity.

36 MATERIALS SCIENCE↗

Understanding the deformation mechanisms in Ni-based superalloys with using crystal plasticity finite element method

Nl-based superalloy is considered as a good candidate due to its excellent resistance to elevated temperature deformation for long term period application. Understanding the deformation and failure mechanisms of Ni-Based superalloys is very helpful for providing design guidelines for processing Ni-based superalloys. Experimental characterization indicates that the deformation mechanisms of Ni based superalloy is strongly microstructure dependent. Besides, damage transform from the void nucleation to the macro cracks by voids growth leading to the failure of the Ni-based superalloys are also showing strong microstructure sensitivity. Therefore, this work focuses on the prediction and comprehension of the deformation and void growth behavior in Ni based superalloy at different working conditions via crystal plasticity finite element modeling and simulation. Physically based crystal plasticity frameworks were developed for newly Ni- based superalloy Haynes 282. It was found that dislocation shearing through the precipitates were acting as the main contributor to the strength of Haynes 282 at room temperature and 815°C. Our analysis of the creeping behavior of Haynes 282 exhibited that resistance of general climb replaced by the resistance induced by the deposited climb dislocation density. In addition, in the study of void growth behavior, our simulation results demonstrated that as the main loading axis perpendicular to the grain boundary (GB), voids grow more slowly on tilt GBs in bicrystals than those in single and bicrystals with twist GBs. And tilt GBs would promote the void grow into irregular shape.

36 MATERIALS SCIENCE↗

Crystal Plasticity Model of Reactor Pressure Vessel Embrittlement in GRIZZLY

The integrity of reactor pressure vessels (RPVs) is of utmost importance to ensure safe operation of nuclear reactors under extended lifetime. Microstructure-scale models at various length and time scales, coupled concurrently or through homogenization methods, can play a crucial role in understanding and quantifying irradiation-induced defect production, growth and their influence on mechanical behavior of RPV steels. A multi-scale approach, involving atomistic, meso- and engineering-scale models, is currently being pursued within the GRIZZLY project to understand and quantify irradiation-induced embrittlement of RPV steels. Within this framework, a dislocation-density based crystal plasticity model has been developed in GRIZZLY that captures the effect of irradiation-induced defects on the flow stress behavior and is presented in this report. The present formulation accounts for the interaction between self-interstitial loops and matrix dislocations. The model predictions have been validated with experiments and dislocation dynamics simulation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Investigation of Fission Product Interaction with the SiC Containment Layer of High Turnup TRISO Fuel Particles

Tri-structural Isotropic (TRISO) encapsulated fuel particles are used in high-temperature gas-cooled nuclear reactors. Fuel performance is limited by the propensity of metallic fission products to be released under high temperature testing to simulate hypothesized accident scenarios. The current particle design consists of a 350 μm or 425 μm UO{sub 2} or UCO fuel kernel surrounded by a 100μm porous carbon buffer layer, a 40μm inner pyrolytic carbon (IPyC) layer, a 35μm high-density silicon carbide (SiC) layer, and a 40μm outer pyrolytic carbon (OPyC) layer. Of interest is the fission product interaction with the SiC layer, which provides the most structural support and is the main barrier to the diffusion of fission products. Previous laboratory examination studies have indicated the release of Ag through seemingly intact particles and the localized corrosion of the SiC due to Pd. Although a number of studies have been conducted, the specifics of both the Ag and Pd reaction mechanisms, in addition to U and Pu, through SiC are currently not well understood. This work aims to understand the pathways and kinetics of these interactions under normal operation as well as accident conditions. In order to improve our understanding of this, we have the unique opportunity to examine irradiated TRISO particles to study post-irradiation effects on these materials. Experimental data is necessary to constrain the current models used to predict the behavior of fission products in the SiC layer of TRISO fuels. This work aims to understand the interaction of fission products with the SiC containment layer in TRISO particles. We have systematically examined three SiC shells from irradiated TRISO particles using XAFS, TEM, and EDS. Results indicate the formation of palladium silicides, and uranium and plutonium carbides. Additionally, silver is seen to be metallic. Preliminary microscopy results indicate fission products throughout the SiC layer of the TRISO particles, and microstructural changes have been observed between the as-irradiated and safety tested particles. These results have provided key information on the fission product transport behavior through irradiated SiC at varying temperatures. Knowledge of these reaction pathways will allow for better simulation of the long-term behavior of TRISO fuels. They may also suggest ways to modify the SiC layer to improve fuel performance and mitigate fission product release, which is critical for safety strategies required to commercialize these nuclear fuel technologies. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Technical Project Plan for The Enhanced Thermal Conductivity of Oxide Fuels Through the Addition of High Thermal Conductivity Fibers and Microstructural Engineering

The commercial nuclear power industry is investing heavily in advanced fuels that can produce higher power levels with a higher safety margin and be produced at low cost. Although chemically stable and inexpensive to manufacture, the in-core performance of UO{sub 2} fuel is limited by its low thermal conductivity. There will be enormous financial benefits to any utility that can exploit a new type of fuel that is chemically stable, has a high thermal conductivity, and is inexpensive to manufacture. At reactor operating temperatures, UO{sub 2} has a very low thermal conductivity (<5 W/m {center_dot}K), which decreases with temperature and fuel burnup. This low thermal conductivity limits the rate at which energy can be removed from the fuel, thus limiting the total integrated reactor power. If the fuel thermal conductivity could be increased, nuclear reactors would be able to operate at higher powers and larger safety margins thus decreasing the overall cost of electricity by increasing the power output from existing reactors and decreasing the number of new electrical generating plants needed to meet base load demand. The objective of the work defined herein is to produce an advanced nuclear fuel based on the current UO{sub 2} fuel with superior thermal conductivity and structural integrity that is suitable for current and future nuclear reactors, using the existing fuel fabrication infrastructure with minimal modifications. There are two separate components to the research: (1) Enhanced Thermal Conductivity (ETC) - adding high conductivity fibers to the UO{sub 2} prior to sintering, which act as conduits for moving the heat energy generated within the pellet to the outer surface, (2) Microstructural Engineering (ME) - adding second phase particulates to UO{sub 2} bodies to retard grain growth and to increase thermal conductivity, as well as improve fracture and creep resistance. Different groups will perform the laboratory work for each of these research components with some overlap in personnel. The overlapping areas primarily involve computer simulations and final testing of the fuel in a reactor. The estimated cost and duration of this project is $5,000,000 over three years.

enhanced thermal conductivity↗

Rotation of Crystal Seed During Early Stages of Growth Reveals the Anisotropy of Glass Matrix

Glass-ceramics are a highly valuable class of materials that are needed for realizing many high-tech as well as consumer products. They are made by controlling crystallization of glass. Theoretical atomistic insights obtained using molecular dynamics simulations in this work reveal that crystal seeds can spontaneously rotate within glass at high temperatures due to anisotropic forces at the glass-crystal interface. This rotation challenges the long‐held view of glass as isotropic solid, and highlights how atomic‐scale inhomogeneities influence crystal growth and microstructure, hence the physical properties glass‐ceramics.

36 MATERIALS SCIENCE↗

Multi-scale Modeling of Plasticity in Tantalum.

In this report, we present a multi-scale computational model to simulate plastic deformation of tantalum and validating experiments. In atomistic/ dislocation level, dislocation kink- pair theory is used to formulate temperature and strain rate dependent constitutive equations. The kink-pair theory is calibrated to available data from single crystal experiments to produce accurate and convenient constitutive laws. The model is then implemented into a BCC crystal plasticity finite element method (CP-FEM) model to predict temperature and strain rate dependent yield stresses of single and polycrystalline tantalum and compared with existing experimental data from the literature. Furthermore, classical continuum constitutive models describing temperature and strain rate dependent flow behaviors are fit to the yield stresses obtained from the CP-FEM polycrystal predictions. The model is then used to conduct hydro- dynamic simulations of Taylor cylinder impact test and compared with experiments. In order to validate the proposed tantalum CP-FEM model with experiments, we introduce a method for quantitative comparison of CP-FEM models with various experimental techniques. To mitigate the effects of unknown subsurface microstructure, tantalum tensile specimens with a pseudo-two-dimensional grain structure and grain sizes on the order of millimeters are used. A technique combining an electron back scatter diffraction (EBSD) and high resolution digital image correlation (HR-DIC) is used to measure the texture and sub-grain strain fields upon uniaxial tensile loading at various applied strains. Deformed specimens are also analyzed with optical profilometry measurements to obtain out-of- plane strain fields. These high resolution measurements are directly compared with large-scale CP-FEM predictions. This computational method directly links fundamental dislocation physics to plastic deformations in the grain-scale and to the engineering-scale applications. Furthermore, direct and quantitative comparisons between experimental measurements and simulation show that the proposed model accurately captures plasticity in deformation of polycrystalline tantalum.

36 MATERIALS SCIENCE↗

Role of Sink Density in Nonequilibrium Chemical Redistribution in Alloys

Nonequilibrium chemical redistribution in open systems submitted to external forces, such as particle irradiation, leads to changes in the structural properties of the material, potentially driving the system to failure. Such redistribution is controlled by the complex interplay between the production of point defects, atomic transport rates, and the sink character of the microstructure. In this work, we analyze this interplay by means of a kinetic Monte Carlo (KMC) framework with an underlying atomistic model for the Fe-Cr model alloy to study the effect of ideal defect sinks on Cr concentration profiles, with a particular focus on the role of interface density. We observe that the amount of segregation decreases linearly with decreasing interface spacing. Within the framework of the thermodynamics of irreversible processes, a general analytical model is derived and assessed against the KMC simulations to elucidate the structure-property relationship of this system. Interestingly, in the kinetic regime where elimination of point defects at sinks is dominant over bulk recombination, the solute segregation does not directly depend on the dose rate but only on the density of sinks. Furthermore, this model provides new insight into the design of microstructures that mitigate chemical redistribution and improve radiation tolerance.

36 MATERIALS SCIENCE↗

SOC Synthetic Microstructure Bank

QUICK START: Start with property_library.html (can be found by typing the filename into the query box) and use the interactive table to filter, sort, and select a microstructure with the desired properties. Search for the alphabetic code to obtain the corresponding dataset. Full description: This is a bank of 1,970 unique 3-phase electrode microstructure files. When you account for reassigning phase IDs (e.g. declare that 1=Ni and 2=pore, instead of 1=pore and 2=Ni), it actually represents 5,910 unique electrode microstructures, each of which could be considered to be either an air or a fuel electrode (e.g. declare that the phase IDs correspond to pore, Ni, and YSZ; or that they correspond to pore, LSCF, and GDC; or whatever electron-conductor and ion-conductor combination is being studied). The voxel size is 50 nm and each electrode file contains a 4x4 grid of (12.5 micron)^3 sub-volumes. If placed together in a grid, they comprise a 50x50x12.5 micron electrode (note that the interfaces between sub-volumes will be sharp; this can be mitigated via simulating annealing/relaxation). The sub-volumes can also be used individually for a reasonably sized 12.5 micron cubic region-of-interest. A user can simply consider the voxel size to be a different value to rescale the volumes (and all of their morphological features, including particle size) as desired. These microstructures were generated using DREAM3D. The general procedure is outlined in https://doi.org/10.1016/j.jpowsour.2018.03.025 The file names are an alphabetic code having to do with the input parameters used in DREAM3D when they were generated. Most users would be best served by starting with the file property_library.html or property_library_subvols.html (which lists properties for each individual subvolume). These files contain a catalogue of the actual, measured properties of every microstructure in the database. Any combination of property values can be filtered and sorted until a desired electrode is found, at which point the user can find the file corresponding to that alphabetic code. The properties in the catalogue include connected TPB density, and for each phase: phase fraction, average particle size, polydispersity of particle size, tortuosity, and connected pair-wise interfacial area. They also include what fraction of each property is connected through to the interfaces of the volume. If the desired combination of properties is not found at first, remember that the phase IDs can be re-assigned arbitrarily, e.g. swapping 1s and 2s. In fact, the database was generated with this in mind so as not to generate redundant microstructures. If the database does not contain the desired property combinations, try to search for the other possible permutations of those properties with re-assigned phase IDs. Please cite https://doi.org/10.1149/10301.0909ecst for use. Please contact the maintainer, William K. Epting, for additional information or assistance.

3D microstructure↗

Clarification of creep deformation mechanism in heat-affected zone of 9Cr steels with In Situ experiments

This work quantified nonuniform creep deformation across the heterogeneous heat-affected zone (HAZ) of Grade 91 steel with sophisticated experiments, including an electric-thermal finite element model–assisted Gleeble thermomechanical simulation and a high-temperature creep testing with in situ digital image correlation (DIC). High temperature creep properties of HAZ sub-zones were quantitatively measured by the DIC. Furthermore, by utilizing peak temperature, hardness, local creep strain, and underlying microstructures, creep deformation mechanisms in HAZ were further understood. DIC measurements reveal a creep-vulnerable zone (CVZ) exposed to a peak temperature of 932°C (close to A C3 ) in the intercritical HAZ experienced the fastest creep strength degradation instead of the soft zone with the lowest hardness prior to creep. The significantly reduced precipitation strengthening from misplacement of undissolved and coarsened M 23 C 6 carbides led to a faster recrystallization of tempered martensite in the CVZ. Weak untransformed tempered martensite (ferrite grains) stabilized by local Cr enrichment from dissolved M 23 C 6 also harmed the CVZ's creep resistance.

36 MATERIALS SCIENCE↗

A Study on Peripheral Grain Structure Evolution of an AA7050 Aluminum Alloy with a Laboratory-Scale Extrusion Setup

A laboratory-scale hot extrusion setup was designed to investigate recrystallization and grain growth behavior of an AA7050 alloy during extrusion and subsequent heat treatments. Compared with industrial extrusion, the laboratory-scale process enabled rapid water quenching of extrudate with less delay so that the dynamic grain structure development was captured. After extrusion, static microstructure evolution in the extrudates was studied using salt bath annealing for 5 and 15 s at 490 °C and solutionization treatment for 1 h at 490 °C. The salt bath annealing was a simulation of the delay of press quenching in typical industrial extrusion practices. In the as-quenched extrudates, the peripheral region mainly exhibited continuous dynamic recrystallization and geometric dynamic recrystallization, whereas in the core region discontinuous dynamic recrystallization dominated. A <100> and <111> double fiber texture was identified in extrudates, and recrystallization behavior was found to be orientation dependent. The <100> oriented grains contained more sub-grain boundaries and better-defined sub-grains and had a higher tendency to fragment via continuous recrystallization, while the <111> oriented grains produced less sub-grain boundaries and did not recrystallize. Subsequent heat treatments resulted in static recrystallization and abnormal growth of the continuously recrystallized grains. Additionally, the effects of extrusion temperature (440, 480 and 520 °C) and punch speed (0.7, 1.4 and 2.1 mm/s) on grain structure were discussed. A revised grain structure evolution mechanism based on the observation of 7050 extrusion was proposed.

36 MATERIALS SCIENCE↗

A Review of Finite Element Method Models for Nuclear Graphite Applications

Graphite components serve as structural support and as a neutron moderator in multiple nuclear power stations and is also a prospective material in Generation IV reactor concepts. The environment (e.g. high temperature and intense radiation) within a graphite core changes the geometry, microstructure and material properties of the graphite components, that could limit the lifetime (i.e. safe operation) of a reactor. Some of the assessments made for graphite reactor core components include Finite Element Method (FEM) simulations. These simulations are used to estimate the stress state and strain state and probability of failure of irradiated graphite components. FEM also forms part of the validation of measurements or as a complementary technique to experimental procedures in graphite research. A comprehensive overview of FEM methodologies is provided in this review, including: FEM software, basics steps to set up a FEM model, and analytical solutions used to validate simulations for this field of study. In conclusion, the objective of this paper is to inform researchers in the different available FEM techniques and tools used in the research of nuclear graphite.

42 ENGINEERING↗

Effects of ternary alloy additions on the microstructure of highly immiscible Cu alloys subjected to severe plastic deformation: An evaluation of the effective temperature model

Phase evolution in dilute, strongly immiscible Cu-Mo, Cu-Mo-Ni, and Cu-Mo-Ag alloys during severe plastic deformation at low-temperature has been experimentally investigated. For the Cu95Mo05 alloy, Mo nanoparticles are formed, ~10 nm in diameter, as part of a steady state microstructure, with less than ~1 at.% Mo dissolved in the matrix. Addition of 10 or 20 at.% Ni to this binary alloy results in a significant increase in the Mo solubility, whereas comparable additions of Ag has a corresponding little effect. The steady state microstructures of alloys during ball milling of elemental powders are very similar to those during HPT processing of initially homogeneous solutions. The results are discussed in terms of an effective temperature model. Model MD simulations are presented to help relate the predictions of the effective temperature model to atomistic mechanisms.

36 MATERIALS SCIENCE↗

Hydration of calcium sulfoaluminate cements - Experimental findings and thermodynamic modelling

Calcium sulfoaluminate cements (CSA) are a promising low-CO{sub 2} alternative to ordinary Portland cements and are as well of interest concerning their use as binder for waste encapsulation. In this study, the hydration of two CSA cements has been investigated experimentally and by thermodynamic modelling between 1 h and 28 days at w/c ratios of 0.72 and 0.80, respectively. The main hydration product of CSA is ettringite, which precipitates together with amorphous Al(OH){sub 3} until the calcium sulfate is consumed after around 1-2 days of hydration. Afterwards, monosulfate is formed. In the presence of belite, straetlingite occurs as an additional hydration product. The pore solution analysis reveals that straetlingite can bind a part of the potassium ions, which are released by the clinker minerals. The microstructure of both cements is quite dense even after 16 h of hydration, with not much pore space available at a sample age of 28 days. The pore solution of both cements is dominated during the first hours of hydration by potassium, sodium, calcium, aluminium and sulfate; the pH is around 10-11. When the calcium sulfate is depleted, the sulfate concentration drops by a factor of 10. This increases pH to around 12.5-12.8. Based on the experimental data, a thermodynamic hydration model for CSA cements based on cement composition, hydration kinetics of clinker phases and calculations of thermodynamic equilibria by geochemical speciation has been established. The modelled phase development with ongoing hydration agrees well with the experimental findings.

36 MATERIALS SCIENCE↗

Effect of the hydration temperature on the pore structure of cement paste: Experimental investigation and micromechanical modelling

The hydration temperature has a considerable effect on the microstructure of cement paste. The microstructural changes with increasing curing temperature result in a significant decrease of cement mechanical properties. The present work aims at studying these phenomena via micromechanical modelling, based on an experimental characterization of cement microstructure. The pore structure of a class G oil-well cement paste (American Petroleum Institute classification) hydrated at different temperatures, between 7 °C and 90 °C is characterized. Then, the influence of the microstructure variations on the elastic properties of the hardened paste is explored through micromechanical modelling. A previous analysis of the microstructure enabled determining the volume fractions of different phases of a class G cement paste hydrated under different temperatures [1]. A multiscale self-consistent homogenization model is used based on these results to simulate the variations of the mechanical properties with hydration temperature. The results are compared with macro-scale elastic properties obtained from uniaxial compression tests. It is shown that the increasing capillary porosity with elevating hydration temperature, is not sufficient to fully explain this drop of elastic properties. The latter originates mainly from the decrease of the elastic properties of the foam composed of the porous C-S-H intermixed with capillary pores. The pore structure analysis coupled with the micromechanical modelling permitted a back-analysis of the intrinsic porosities of high density and low density C-S-H showing an almost constant LD intrinsic porosity and a significantly decreasing HD intrinsic porosity.

36 MATERIALS SCIENCE↗