Search NASA⌕ Search

SEARCH · Search NASA

Results for “numerical stabilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Chemical explosive mode analysis of lean blowout in a gas turbine combustor

In this study, stabilization and lean blowout (LBO) mechanisms in a gas turbine combustor are numerically studied based on large eddy simulation (LES) data and the chemical explosive mode analysis (CEMA). Three CEMA-based local combustion modes, that is, auto-ignition, diffusion-assisted ignition, and extinction, are employed to quantify interactions between local diffusion and chemical processes in complex turbulent fields. The capability of CEMA-based local modes in extinction detection is first demonstrated in a one-dimensional non-premixed flamelet undergoing transient extinction. Flame structure and dynamics in the gas turbine combustor are then examined in detail using CEMA and the local combustion modes for both the stably burning and lean blowout conditions. Local structure comprised of all the three modes are identified, and each mode is found to play an important role in determining the overall burning rate. The heat release rate attributed to each local mode remains nearly constant at the stably burning condition. In contrast, the flame during LBO shows a two-stage extinction behavior: at the initial stage, the extinction mode is largely enhanced and becomes dominant over the assisted-ignition model; at the second stage, all three modes are suppressed, signifying global extinction. It is therefore suggested that the excessive local extinction mode, due to an increased amount of heat and radical losses through diffusion, finally leads to lean flame blowout.

chemical explosive mode↗

Towards stabilization of pressurized oxy-coal diffusion flames

Designing an effective burner is vital for the development of pressurized oxy-fuel combustion technologies. Turbulent jet diffusion burners are adopted for the pressurized oxy-combustor in this research and a bluff-body is employed to create a recirculation zone to stabilize the flame in pressurized oxy-combustor. The objective of this numerical work is to perform a systematic analysis of the characteristics of this pressurized non-premixed flame. Specifically, a 15-bar POFC combustor of power 100 kWth is modeled employing the Ansys FLUENT commercial platform, using Reynolds-averaged Navier-Stokes (RANS) modeling. The present computational work focuses on identifying the aerothermodynamic features of the isothermal and reacting flow with a disk-shape bluff-body. Results show that fuel-oxidizer stream momentum ratio has great impacts on the temperature profile of the down-fired, co-axial, pressurized oxy-coal, diffusion flame. Parametric study of the width of the burner tip identifies an optimal range for this pressurized burner.

Li, Lei↗

Predictions of long-term behavior of a large-volume pilot test for CO2 geological storage in a saline formation in the Central Valley, California

The long-term behavior of a CO{sub 2} plume injected into a deep saline formation is investigated, focusing on mechanisms that lead to plume stabilization. Key measures are plume migration distance and the time evolution of CO{sub 2} phase-partitioning, which are examined by developing a numerical model of the subsurface at a proposed power plant with CO{sub 2} capture in the San Joaquin Valley, California, where a large-volume pilot test of CO{sub 2} injection will be conducted. The numerical model simulates a four-year CO{sub 2} injection period and the subsequent evolution of the CO{sub 2} plume until it stabilizes. Sensitivity studies are carried out to investigate the effect of poorly constrained model parameters permeability, permeability anisotropy, and residual gas saturation.

15 GEOTHERMAL ENERGY↗

Theoretical and numerical modelling of chaotic electrostatic ion cyclotron (EIC) oscillations by Jerk equation

In the last few years, third order explicit autonomous differential equations, known as jerk equations, have generated great interest as they show features of regular and chaotic motion. In this paper, we have modelled chaotic electrostatic ion cyclotron oscillations using a third order nonlinear ordinary differential equation (ODE) and investigated its nonlinear dynamical properties. The nonlinear ODE has been derived for a plasma system from a two fluid model in the presence of a source term, under the influence of an external magnetic field, which is perpendicular to the direction of the wave vector. It is seen that the equation does not require an external forcing term to obtain chaotic behaviour. The stability of the solutions of the equation has been investigated analytically as well as numerically, and the bifurcation diagram obtained shows a number of interesting phenomena for various regimes of parameters. The coexisting attractors as well as their corresponding basins are shown and the phase space portraits at different conditions are obtained numerically and shown here. The results obtained here are in agreement with preliminary experiments conducted for a similar configuration of a plasma system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

EFFECTS OF DYNAMICAL EVOLUTION OF GIANT PLANETS ON SURVIVAL OF TERRESTRIAL PLANETS

The orbital distributions of currently observed extrasolar giant planets allow marginally stable orbits for hypothetical, terrestrial planets. In this paper, we propose that many of these systems may not have additional planets on these ''stable'' orbits, since past dynamical instability among giant planets could have removed them. We numerically investigate the effects of early evolution of multiple giant planets on the orbital stability of the inner, sub-Neptune-like planets which are modeled as test particles, and determine their dynamically unstable region. Previous studies have shown that the majority of such test particles are ejected out of the system as a result of close encounters with giant planets. Here, we show that secular perturbations from giant planets can remove test particles at least down to 10 times smaller than their minimum pericenter distance. Our results indicate that, unless the dynamical instability among giant planets is either absent or quiet like planet-planet collisions, most test particles down to {approx}0.1 AU within the orbits of giant planets at a few AU may be gone. In fact, out of {approx}30% of survived test particles, about three quarters belong to the planet-planet collision cases. We find a good agreement between our numerical results and the secular theory, and present a semi-analytical formula which estimates the dynamically unstable region of the test particles just from the evolution of giant planets. Finally, our numerical results agree well with the observations, and also predict the existence of hot rocky planets in eccentric giant planet systems.

79 ASTRONOMY AND ASTROPHYSICS↗

Toroidal modeling of energetic passing particle drift kinetic effects on tearing mode stability

Abstract Drift kinetic effects of the neutral beam injection induced passing energetic particles (EPs) on the linear stability of the n = 1 tearing mode (TM) (with the dominant poloidal harmonic of m = 2) are numerically investigated utilizing the MARS-K code (Liu et al 2008 Phys. Plasmas 15 112503), in a tokamak plasma with finite equilibrium pressure and anisotropic thermal transport. In the low plasma pressure regime, it is found that co- (counter-) passing EPs stabilize (destabilize) the TM, agreeing with previous studies. However, as the plasma pressure increases beyond a critical value, it is found that co-passing EPs also destabilize the mode. An in-depth analysis reveals that the net effect of co-passing EPs is a result of competition between the stabilizing contribution from the non-adiabatic drift kinetic terms and the destabilizing contribution associated with adiabatic terms, with the latter becoming more dominant at higher equilibrium pressure. Non-perturbative magnetohydrodynamic-kinetic hybrid modeling also finds that co- and counter-passing EPs modify the TM eigenfunction differently, with the counter-passing EPs enhancing the sideband harmonics. Furthermore, effects of the plasma resistivity and toroidal rotation, as well as that of the equilibrium distribution of EPs in the particle pitch angle space, are also investigated, showing asymmetric results on the TM stability between the co- and counter-passing EPs. The first order finite orbit width correction is found to be stabilizing with co-passing EPs and destabilizing with counter-passing particles. Finally, drift resonances between passing EPs and the TM induce finite frequency to the mode and generate finite net torques inside the plasma, due to the neoclassical toroidal viscosity and the Reynolds stress associated with 3D perturbations.

Physics↗

Dynamic stability of unidirectional fiber-reinforced viscoelastic composite plates

This paper deals with a dynamic stability analysis of unidirectional fiber-reinforced composite viscoelastic plates subjected to compressive edge loads. The integrodifferential equations governing the stability problem are obtained by using, in conjunction with a Boltzmann hereditary constitutive law for a three-dimensional viscoelastic medium, a higher-order shear deformation theory of orthotropic plates. Such a theory incorporates transverse shear deformation, transverse normal stress, and rotatory inertia effects. The solution of the stability problem as considered within this paper concerns the determination of the critical in-plane edge loads yielding the asymptotic instability. Numerical applications, based on material properties derived within the framework of Aboudi's micromechanical model, are presented and pertinent conclusions concerning the nature of the loss of stability and the influence of various parameters are outlined.

Chandiramani, N. K.↗

Exponential Time Differencing Gauge Method for Incompressible Viscous Flows

Abstract In this paper, we study an exponential time differencing method for solving the gauge system of incompressible viscous flows governed by Stokes or Navier-Stokes equations. The momentum equation is decoupled from the kinematic equation at a discrete level and is then solved by exponential time stepping multistep schemes in our approach. We analyze the stability of the proposed method and rigorously prove that the first order exponential time differencing scheme is unconditionally stable for the Stokes problem. We also present a compact representation of the algorithm for problems on rectangular domains, which makes FFT-based solvers available for the resulting fully discretized system. Various numerical experiments in two and three dimensional spaces are carried out to demonstrate the accuracy and stability of the proposed method.

Physics↗

The deceiving Δ′: On the equilibrium dependent dynamics of nonlinear magnetic islands

The linear stability parameter Δ′ is commonly used as a figure of merit for the nonlinear dynamics of the tearing mode. It is shown, through numerical simulations, that factors other than Δ′ can play a very important role in determining the evolution of nonlinear magnetic islands, even relatively close to marginal stability. In particular, two different equilibria are analysed and it is shown that, once perturbed, they have a qualitatively and quantitatively different response despite the fact that they are characterised by the same Δ′. However, the different behaviour can still be associated with linear properties of the equilibrium. It is also studied how the nonlinear and saturation phase are affected by an increasing Δ′ in the two equilibria. As the instability drive is increased, the systems move from a dynamics characterised by a “universal” generalised Rutherford equation to a Y-point configuration and then to a plasmoid unstable Y-point. Remarkably, in certain configurations the Rutherford phase is absent and the system forms a current ribbon without an X-point collapse.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

3D Relativistic Magnetohydrodynamic Simulations of Magnetized Spine-Sheath Relativistic Jets

Numerical simulations of weakly magnetized and strongly magnetized relativistic jets embedded in a weakly magnetized and strongly magnetized stationary or weakly relativistic (v = c/2) sheath have been performed. A magnetic field parallel to the flow is used in these simulations performed by the new GRMHD numerical code RAISHIN used in its RMHD configuration. In the numerical simulations the Lorentz factor gamma = 2.5 jet is precessed to break the initial equilibrium configuration. In the simulations sound speeds are less than or equal to c/the square root of 3 in the weakly magnetized simulations and less than or equal to 0.56 c in the strongly magnetized simulations. The Alfven wave speed is less than or equal to 0.07 c in the weakly magnetized simulations and less than or equal to 0.56 c in the strongly magnetized simulations. The results of the numerical simulations are compared to theoretical predictions from a normal mode analysis of the linearized relativistic magnetohydrodynamic (RMHD) equations capable of describing a uniform axially magnetized cylindrical relativistic jet embedded in a uniform axially magnetized relativistically moving sheath. The theoretical dispersion relation allows investigation of effects associated with maximum possible sound speeds, Alfven wave speeds near light speed and relativistic sheath speeds. The prediction of increased stability of the weakly magnetized system resulting from c/2 sheath speeds and the stabilization of the strongly magnetized system resulting from c/2 sheath speeds is verified by the numerical simulation results.

Mizuno, Yosuke↗

On the nonlinear theory of collective Cherenkov interaction of a high-density relativistic beam with a plasma

The nonlinear dynamics of the instability of a straight high-density relativistic electron beam under the conditions of the stimulated Cherenkov effect in a plasma waveguide is studied both analytically and numerically. It is shown that, for a beam of sufficiently high density such that the stabilizing factors are nonlinear frequency shifts and for a plasma described in a linear approximation, the basic equations have soliton-like solutions and the electron beam after saturation of the instability relaxes to its initial, weakly perturbed state, provided that only one harmonic of the plasma and the beam density is taken into account. The analytical solutions obtained here for this case correlate well with the numerical ones. A more general model that accounts for the generation of higher harmonics of the plasma and the beam density does not yield soliton-like solutions for the time evolution of the amplitudes of the plasma and beam waves. In such a model, the instability will be collective again: it can be described analytically (at least, up to the time at which it saturates) by using equations with cubic nonlinearities and the method of expansion of the electron trajectories and momenta.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Computational Flame Diagnostics for Direct Numerical Simulations with Detailed Chemistry of Transportation Fuels

The goal of the proposed research is to create computational flame diagnostics (CFLD) that are rigorous numerical algorithms for systematic detection of critical flame features, such as ignition, extinction, and premixed and non-premixed flamelets, and to understand the underlying physicochemical processes controlling limit flame phenomena, flame stabilization, turbulence-chemistry interactions and pollutant emissions etc. The goal has been accomplished through an integrated effort on mechanism reduction, direct numerical simulations (DNS) of flames at engine conditions and a variety of turbulent flames with transport fuels, computational diagnostics, turbulence modeling, and DNS data mining and data reduction. The computational diagnostics are primarily based on the chemical explosive mode analysis (CEMA) and a recently developed bifurcation analysis using datasets from first-principle simulations of 0-D reactors, 1-D laminar flames, and 2-D and 3-D DNS (collaboration with J.H. Chen and S. Som at Argonne, and C.S. Yoo at UNIST). Non-stiff reduced mechanisms for transportation fuels amenable for 3-D DNS are developed through graph-based methods and timescale analysis. The flame structures, stabilization mechanisms, local ignition and extinction etc., and the rate controlling chemical processes are unambiguously identified through CFLD. CEMA is further employed to segment complex turbulent flames based on the critical flame features, such as premixed reaction fronts, and to enable zone-adaptive turbulent combustion modeling.

42 ENGINEERING↗

Stability analysis of spectral methods for hyperbolic initial-boundary value systems

A constant coefficient hyperbolic system in one space variable, with zero initial data is discussed. Dissipative boundary conditions are imposed at the two points x = + or - 1. This problem is discretized by a spectral approximation in space. Sufficient conditions under which the spectral numerical solution is stable are demonstrated - moreover, these conditions have to be checked only for scalar equations. The stability theorems take the form of explicit bounds for the norm of the solution in terms of the boundary data. The dependence of these bounds on N, the number of points in the domain (or equivalently the degree of the polynomials involved), is investigated for a class of standard spectral methods, including Chebyshev and Legendre collocations.

Gottlieb, D.↗

Receptivity of Hypersonic Boundary Layers to Distributed Roughness and Acoustic Disturbances

Boundary-layer receptivity and stability of Mach 6 flows over smooth and rough seven-degree half-angle sharp-tipped cones are numerically investigated. The receptivity of the boundary layer to slow acoustic disturbances, fast acoustic disturbances, and vortical disturbances is considered. The effects of three-dimensional isolated roughness on the receptivity and stability are also simulated. The results for the smooth cone show that the instability waves are generated in the leading edge region and that the boundary layer is much more receptive to slow acoustic waves than to the fast acoustic waves. Vortical disturbances also generate unstable second modes, however the receptivity coefficients are smaller than that of the slow acoustic wave. Distributed roughness elements located near the nose region decreased the receptivity of the second mode generated by the slow acoustic wave by a small amount. Roughness elements distributed across the continuous spectrum increased the receptivity of the second mode generated by the slow and fast acoustic waves and the vorticity wave. The largest increase occurred for the vorticity wave. Roughness elements distributed across the synchronization point did not change the receptivity of the second modes generated by the acoustic waves. The receptivity of the second mode generated by the vorticity wave increased in this case, but the increase is lower than that occurred with the roughness elements located across the continuous spectrum. The simulations with an isolated roughness element showed that the second mode waves generated by the acoustic disturbances are not influenced by the small roughness element. Due to the interaction, a three-dimensional wave is generated. However, the amplitude is orders of magnitude smaller than the two-dimensional wave.

Balakumar, P.↗

Climate change impacts on US agriculture and forestry: benefits of global climate stabilization

Increasing atmospheric carbon dioxide levels, higher temperatures, altered precipitation patterns, and other climate change impacts have already begun to affect US agriculture and forestry, with impacts expected to become more substantial in the future. There have been numerous studies of climate change impacts on agriculture or forestry, but relatively little research examining the long-term net impacts of a stabilization scenario relative to a case with unabated climate change. We provide an analysis of the potential benefits of global climate change mitigation for US agriculture and forestry through 2100, accounting for landowner decisions regarding land use, crop mix, and management practices. The analytic approach involves a combination of climate models, a crop process model (EPIC), a dynamic vegetation model used for forests (MC1), and an economic model of the US forestry and agricultural sector (FASOM-GHG). We find substantial impacts on productivity, commodity markets, and consumer and producer welfare for the stabilization scenario relative to unabated climate change, though the magnitude and direction of impacts vary across regions and commodities. Although there is variability in welfare impacts across climate simulations, we find positive net benefits from stabilization in all cases, with cumulative impacts ranging from $32.7 billion to $54.5 billion over the period 2015-2100. Our estimates contribute to the literature on potential benefits of GHG mitigation and can help inform policy decisions weighing alternative mitigation and adaptation actions.

agricultural modeling↗

DNS of a Simplified Gas Turbine Premixer: Auto-Ignition and Flame Stabilization

With the increasing need for fuel-flexibility, an understanding of auto-ignition inside gas turbine premixers is crucial. Direct numerical simulation (DNS) is a great tool to reveal the fine grain details of physics inside the premixer and guide the choice of the models to use for less expensive simulations. We present numerical simulations of a simplified and downscaled premixer, with multiple air jets in rich fuel crossflow. The simulations show intense fuel-air mixing and flame-turbulence interaction. We examine flow acceleration by the incoming jets, and the combustion within the device. We observe low-temperature and high-temperature combustion signatures, and compute the flame index to quantify local stabilization modes.

combustion↗

Surface stability of SrNbO 3+δ grown by hybrid molecular beam epitaxy

4d transition metal oxides have emerged as promising materials for numerous applications including high mobility electronics. SrNbO 3 is one such candidate material, serving as a good donor material in interfacial oxide systems and exhibiting high electron mobility in ultrathin films. However, its synthesis is challenging due to the metastable nature of the d 1 Nb 4+ cation and the limitations in the delivery of refractory Nb. To date, films have been grown primarily by pulsed laser deposition (PLD), but development of a means to grow and stabilize the material via molecular beam epitaxy (MBE) would enable studies of interfacial phenomena and multilayer structures that may be challenging by PLD. To that end, SrNbO 3 thin films were grown using hybrid MBE for the first time using a tris(diethylamido)(tert-butylimido) niobium precursor for Nb and an elemental Sr source on GdScO 3 substrates. Varying thicknesses of insulating SrHfO 3 capping layers were deposited using a hafnium tert-butoxide precursor for Hf on top of SrNbO 3 films to preserve the metastable surface. Grown films were transferred in vacuo for x-ray photoelectron spectroscopy to quantify elemental composition, density of states at the Fermi energy, and Nb oxidation state. Ex situ studies by x-ray absorption near edge spectroscopy and scanning transmission electron microscopy illustrate that the SrHfO 3 capping plays an important role in preserving the crystalline quality of the material and the Nb 4d 1 metastable charge state under atmospheric conditions.

36 MATERIALS SCIENCE↗

Global current profile effects on the evolution and saturation of magnetic islands

The nonlinear evolution of magnetic islands is investigated by means of numerical simulations. The growth and saturation of the island are shown to depend not only on asymptotic tearing mode stability parameter {Delta}{sup Prime} but also on the initial global current profile. Presence of the external current sheets leads to the formation of different island state for the same value of {Delta}{sup Prime }. It is found that the flow vorticity generated by the interacting current sheets is an important feature of nonlocal interactions and nonlocal effects in magnetic islands dynamics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗