Search NASA⌕ Search

SEARCH · Search NASA

Results for “range decomposition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Distribution of bisphenol A into tissues of adult, neonatal, and fetal Sprague-Dawley rats

Bisphenol A (BPA) is an important industrial chemical used in the manufacture of polycarbonate plastic products and epoxy resin-based food can liners. The presence of BPA metabolites in urine of > 90% of Americans aged 6-60 suggests ubiquitous and frequent exposure in the range of 0.02-0.2 {mu}g/kg bw/d (25th-95th percentiles). The current study used LC/MS/MS to measure placental transfer and concentrations of aglycone (receptor-active) and conjugated (inactive) BPA in tissues from Sprague-Dawley rats administered deuterated BPA (100 {mu}g/kg bw) by oral and IV routes. In adult female rat tissues, the tissue/serum concentration ratios for aglycone BPA ranged from 0.7 in liver to 5 in adipose tissue, reflecting differences in tissue perfusion, composition, and metabolic capacity. Following IV administration to dams, placental transfer was observed for aglycone BPA into fetuses at several gestational days (GD), with fetal/maternal serum ratios of 2.7 at GD 12, 1.2 at GD 16, and 0.4 at GD 20; the corresponding ratios for conjugated BPA were 0.43, 0.65, and 3.7. These ratios were within the ranges observed in adult tissues and were not indicative of preferential accumulation of aglycone BPA or hydrolysis of conjugates in fetal tissue in vivo. Concentrations of aglycone BPA in GD 20 fetal brain were higher than in liver or serum. Oral administration of the same dose did not produce measurable levels of aglycone BPA in fetal tissues. Amniotic fluid consistently contained levels of BPA at or below those in maternal serum. Concentrations of aglycone BPA in tissues of neonatal rats decreased with age in a manner consistent with the corresponding circulating levels. Phase II metabolism of BPA increased with fetal age such that near-term fetus was similar to early post-natal rats. These results show that concentrations of aglycone BPA in fetal tissues are similar to those in other maternal and neonatal tissues and that maternal Phase II metabolism, especially following oral administration, and fetal age are critical in reducing exposures to the fetus. - Highlights: > Studies of BPA in rat tissues showed placental transfer and fetal metabolism. > Levels in fetus are similar to maternal tissues. > Fetal metabolism can reduce levels.

60 APPLIED LIFE SCIENCES↗

Chemical model for cement-based materials: Temperature dependence of thermodynamic functions for nanocrystalline and crystalline C-S-H phases

In the context of waste confinement and, more specifically, waste from the nuclear industry, concrete is used both as a confinement and as a building material. Its exposure to high temperatures makes its geochemical behavior difficult to predict over large periods of time. The present work aims to elucidate the solubility constants, as a function of temperature, for the phases of the system CaO-SiO{sub 2}-H{sub 2}O. For the nanocrystalline phases, the present work investigates the existence of compounds of fixed composition, possibly in a metastable state. The question of whether the nanocrystalline C-S-H phases correspond to a series of phases of discrete composition or a solid solution is discussed and compared to the possible influence of impurities in the solid phases. For the crystalline phases, having established that the currently available values of thermodynamic properties were not consistent, we show that their refinement leads to a better agreement with the literature data. From the refined thermodynamic properties of crystalline C-S-H, a polyhedral decomposition model is developed. It enables to estimate the enthalpy of formation and the heat capacity of nanocrystalline C-S-H phases. Finally, verification shows that such phases remain unstable compared to the crystalline phases, at room or higher temperatures. A comparison, based on reaction enthalpies derived from experimental data indicates that predicted values for nanocrystalline C-S-H are in close agreement with experimental data. By estimating the properties of okenite and truscottite with the model developed in this study, we have been able to complete the CaO-SiO{sub 2}-H{sub 2}O phase diagram with a reasonable agreement with the literature. The case of jaffeite remains open to discussion. Finally, for the hydrate C2SH,alpha, the model predicts a transition with hillebrandite at 159 deg. C, in contradiction with the hypothesis of C2SH,alpha metastability.

36 MATERIALS SCIENCE↗

Electric, thermoelectric and magnetic characterization of γ-Fe2O3 and Co3O4 nanoparticles synthesized by facile thermal decomposition of metal-Schiff base complexes

Highlights: • Fe and Co oxide NPs were prepared from Schiff base complexes as new precursors. • The electrical conduction in Fe and Co oxide NPs is governed by hopping processes. • Co{sub 3}O{sub 4} NPs show weak ferromagnetic ordering at room temperature. • γ-Fe{sub 2}O{sub 3} NPs have superparamagnetic behavior. - Abstract: Using novel compounds for synthesis of metal oxide nanomaterials can tune their physical properties due to the associated variation in the shape, size and crystallinity. In this work, γ-Fe{sub 2}O{sub 3} and Co{sub 3}O{sub 4} nanoparticles were successfully prepared by a facile thermal decomposition route, employing [Fe(C{sub 32}H{sub 22}N{sub 4}O{sub 2})]·2H{sub 2}O and [Co(C{sub 16}H{sub 11}N{sub 3}O{sub 4})].(1/2)H{sub 2}O complexes, respectively as new precursors. The x-ray diffraction and high resolution transmission electron microscopy investigation confirmed that the materials consist of highly pure spinel γ-Fe{sub 2}O{sub 3} and Co{sub 3}O{sub 4} nanoparticles with average size of ∼ 9 and 30 nm, respectively. The electrical conduction is governed by the hopping mechanism. The thermoelectric power measurements confirmed that Co{sub 3}O{sub 4} nanoparticles are non-degenerate semiconductor with Fermi energy ∼1.21 eV while γ-Fe{sub 2}O{sub 3} nanoparticles showed a degenerate to non-degenerate transition. The Co{sub 3}O{sub 4} nanoparticles showed a weak ferromagnetic ordering that could be attributed to uncompensated surface spins due to finite-size effects. But γ- Fe{sub 2}O{sub 3} NPs show superparamagnetic behavior at room temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Dynamic field theory and equations of motion in cosmology

We discuss a field-theoretical approach based on general-relativistic variational principle to derive the covariant field equations and hydrodynamic equations of motion of baryonic matter governed by cosmological perturbations of dark matter and dark energy. The action depends on the gravitational and matter Lagrangian. The gravitational Lagrangian depends on the metric tensor and its first and second derivatives. The matter Lagrangian includes dark matter, dark energy and the ordinary baryonic matter which plays the role of a bare perturbation. The total Lagrangian is expanded in an asymptotic Taylor series around the background cosmological manifold defined as a solution of Einstein’s equations in the form of the Friedmann–Lemaître–Robertson–Walker (FLRW) metric tensor. The small parameter of the decomposition is the magnitude of the metric tensor perturbation. Each term of the series expansion is gauge-invariant and all of them together form a basis for the successive post-Friedmannian approximations around the background metric. The approximation scheme is covariant and the asymptotic nature of the Lagrangian decomposition does not require the post-Friedmannian perturbations to be small though computationally it works the most effectively when the perturbed metric is close enough to the background FLRW metric. The temporal evolution of the background metric is governed by dark matter and dark energy and we associate the large scale inhomogeneities in these two components as those generated by the primordial cosmological perturbations with an effective matter density contrast δρ/ρ≤1. The small scale inhomogeneities are generated by the condensations of baryonic matter considered as the bare perturbations of the background manifold that admits δρ/ρ≫1. Mathematically, the large scale perturbations are given by the homogeneous solution of the linearized field equations while the small scale perturbations are described by a particular solution of these equations with the bare stress–energy tensor of the baryonic matter. We explicitly work out the covariant field equations of the successive post-Friedmannian approximations of Einstein’s equations in cosmology and derive equations of motion of large and small scale inhomogeneities of dark matter and dark energy. We apply these equations to derive the post-Friedmannian equations of motion of baryonic matter comprising stars, galaxies and their clusters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

THE DETECTION OF ANOMALOUS DUST EMISSION IN THE NEARBY GALAXY NGC 6946

We report on the Ka-band (26-40 GHz) emission properties for 10 star-forming regions in the nearby galaxy NGC 6946. From a radio spectral decomposition, we find that the 33 GHz flux densities are typically dominated by thermal (free-free) radiation. However, we also detect excess Ka-band emission for an outer-disk star-forming region relative to what is expected given existing radio, submillimeter, and infrared data. Among the 10 targeted regions, measurable excess emission at 33 GHz is detected for half of them, but in only one region is the excess found to be statistically significant ({approx}7{sigma}). We interpret this as the first likely detection of so-called 'anomalous' dust emission outside of the Milky Way. We find that models explaining this feature as the result of dipole emission from rapidly rotating ultrasmall grains are able to reproduce the observations for reasonable interstellar medium conditions. While these results suggest that the use of Ka-band data as a measure of star formation activity in external galaxies may be complicated by the presence of anomalous dust, it is unclear how significant a factor this will be for globally integrated measurements as the excess emission accounts for {approx}<10% of the total Ka-band flux density from all 10 regions.

79 ASTRONOMY AND ASTROPHYSICS↗

Laser Shock Processing of Metallic Materials: Coupling of Laser-Plasma Interaction and Material Behaviour Models for the Assessment of Key Process Issues

Profiting by the increasing availability of laser sources delivering intensities above 109 W/cm{sup 2} with pulse energies in the range of several Joules and pulse widths in the range of nanoseconds, laser shock processing (LSP) is consolidating as an effective technology for the improvement of surface mechanical and corrosion resistance properties of metals. The main advantage of the laser shock processing technique consists on its capability of inducing a relatively deep compression residual stresses field into metallic alloy pieces allowing an improved mechanical behaviour, explicitly, the life improvement of the treated specimens against wear, crack growth and stress corrosion cracking. Although significant work from the experimental side has been contributed to explore the optimum conditions of application of the treatments and to assess their ultimate capability to provide enhanced mechanical behaviour to work-pieces of typical materials, only limited attempts have been developed in the way of full comprehension and predictive assessment of the characteristic physical processes and material transformations with a specific consideration of real material properties. In the present paper, a review on the physical issues dominating the development of LSP processes from a high intensity laser-matter interaction point of view is presented along with the theoretical and computational methods developed by the authors for their predictive assessment and practical results at laboratory scale on the application of the technique to different materials.

36 MATERIALS SCIENCE↗

Can theory quantitatively model stratospheric photolysis? Ab initio estimate of absolute absorption cross sections of ClOOCl

We have calculated the absorption spectrum of dichlorine peroxide (ClOOCl) in the spectral range 250-400 nm. We have employed five different approaches to quantitatively model the absorption cross section (empirical broadening scheme, linearized harmonic reflection principle and full reflection principle with ground state density calculated using harmonic approximation, classical molecular dynamics, and path-integral molecular dynamics). We have also tested various single and multireference methods. We found that (i) the excitation characteristics of ClOOCl are sensitive on molecular geometries and therefore the ground state density has to be properly sampled and that (ii) single-reference methods tend to overestimate the absorption cross section and lead to a blueshift in the absorption maximum. The absorption spectrum calculated at the CASPT2 level with complete active space-configuration interaction (CAS-SCF) transition dipole moment with the ground state sampled via path-integral molecular dynamics is in a good agreement with the experiment. We, however, did not reach full agreement in the atmospherically relevant low-energy tail of the spectrum. The general message is that quantitative predictions are difficult even for a relatively small molecule as ClOOCl and the convergence, with respect to the electronic structure method, basis set used, and ground state sampling, needs to be carefully examined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical bonding analysis and properties of La{sub 7}Os{sub 4}C{sub 9}-A new structure type containing C- and C{sub 2}-units as Os-coordinating ligands

The new ternary carbide La{sub 7}Os{sub 4}C{sub 9} was prepared by argon arc-melting of the elements followed by subsequent heat treatment at 900 deg. C for 250 h. The compound crystallizes monoclinic, in the space group C2/m (a=1198.5(2) pm, b=542.0(1) pm, c=1196.2(2) pm, {beta}=111.04(1){sup o}, V=725.2(2)x10{sup 6} pm{sup 3}, Z=2). The structure was determined from single crystal X-ray diffraction data and refined to a residual of R{sub 1}=0.02 (wR{sub 2}=0.03) for 4812 unique reflections and 64 variable parameters. Electrical resistivity and magnetic susceptibility measurements characterize the compound as a Pauli-paramagnetic metal. The crystal structure contains bridging C- and terminal C{sub 2}-units as Os-coordinating ligands, thereby forming polyanions {sub {infinity}}{sup 1}[Os{sub 4}(C{sub 2}){sub 2}C{sub 5}] running along the [101] direction. The polyanions are composed of alternating Os(C{sub 2})C{sub 2} and OsC{sub 3} units with the transition metal in distorted trigonal planar coordination. Charge compensation is ensured by La cations which are situated in-between the polyanions. The carbon-carbon bond (131 pm) within the C{sub 2} pairs is slightly shorter than the value of a common C-C double bond, and is discussed on the basis of COHP curves on the one side, and with ELI-D and electron density distributions on the other side. The method of partial ELI-D decomposition is shown to be well suited for the characterization of separated DOS structures in terms of chemical bonding signatures provided by ELI-D. The Os-La interactions are shown to be of a polar multicenter-bonding type with Os playing the role of the electron donor. Compared to an acetylide the C{sub 2} species were found to possess a significantly reduced bond order and an enhanced number of electrons in lone pair type spatial regions. This type of species cannot be simply classified in terms of model pictures such as C{sub 2}{sup 2-} and C{sub 2}{sup 4-}, respectively. - Graphical Abstract: Polar multicenter Os-La bonding in the compound La{sub 7}Os{sub 4}C{sub 9} is discussed in position space from a combined analysis of the electron localizability indicator (ELI-D) and the electron density. The picture shows five electron density basins (gray translucent) for atom types Os (green spheres) and La (red spheres) and only those parts (in blue colour) of 4 Os-La multicenter ELI-D basins, which are intersected by the electron density basins displayed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physics-guided dual implicit neural representations for source separation

Significant challenges exist in efficient data analysis of most advanced experimental and observational techniques because the collected signals often include unwanted contributions, such as background and signal distortions, that can obscure the physically relevant information of interest. To address this, we have developed a self-supervised machine-learning approach for source separation using a dual implicit neural representation framework that jointly trains two neural networks: one for approximating distortions of the physical signal of interest and the other for learning the effective background contribution. Our method learns directly from the raw data by minimizing a reconstruction-based loss function without requiring labeled data or pre-defined dictionaries. We demonstrate the effectiveness of our framework by considering a challenging case study involving large-scale simulated, as well as experimental, momentum-energy-dependent inelastic neutron scattering data in a four-dimensional parameter space, characterized by heterogeneous background contributions and unknown distortions to the target signal. The method is found to successfully separate physically meaningful signals from a complex or structured background even when the signal characteristics vary across all four dimensions of the parameter space. An analytical approach that informs the choice of the regularization parameter is presented. Our method offers a versatile framework for addressing source separation problems across diverse domains, ranging from superimposed signals in astronomical measurements to structural features in biomedical image reconstructions.

47 OTHER INSTRUMENTATION↗

Phenoxo bridged dinuclear Zn(II) Schiff base complex as new precursor for preparation zinc oxide nanoparticles: Synthesis, characterization, crystal structures and photoluminescence studies

Highlights: • A novel nano-scale Zn(II) complex was synthesized by solvothermal method. • Chemical structure of the nanostructures was characterized as well as bulk complex. • The photoluminescence property of the complex was investigated at room temperature. • The thermogravimetry and differential thermal analysis were carried out. • Thermal decomposition of the nanostructures was prepared zinc oxide nanoparticles. - Abstract: Nanoparticles of a novel Zn(II) Schiff base complex, [Zn(HL)NO{sub 3}]{sub 2} (1), (H{sub 2}L = 2-[(2-hydroxy-propylimino) methyl] phenol), was synthesized by using solvothermal method. Shape, morphology and chemical structure of the synthesized nanoparticles were characterized by scanning electron microscopy (SEM), X-ray powder diffraction (XRD), Fourier Transform Infrared Spectoscopy (FT-IR) and UV–vis spectroscopy. Structural determination of compound 1 was determined by single-crystal X-ray diffraction. The results were revealed that the zinc complex is a centrosymmetric dimer in which deprotonated phenolates bridge the two five-coordinate metal atoms and link the two halves of the dimer. The thermal stability of compound 1 was analyzed by thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). The effect of the initial substrates concentration and reaction time on size and morphology of compound 1 nanostructure was investigated as well. Furthermore, the luminescent properties of the complex 1 were examined. ZnO nanoparticles with diameter between 15 and 20 nm were simply synthesized by solid-state transformation of compound 1 at 700 °C.

36 MATERIALS SCIENCE↗

MEASUREMENTS OF ISOTOPE EFFECTS IN THE PHOTOIONIZATION OF N{sub 2} AND IMPLICATIONS FOR TITAN'S ATMOSPHERE

Isotope effects in the non-dissociative photoionization of molecular nitrogen (N{sub 2} + h{nu} {yields} N{sub 2} {sup +} + e {sup -}) may play a role in determining the relative abundances of isotopic species containing nitrogen in interstellar clouds and planetary atmospheres but have not been previously measured. Measurements of the photoionization efficiency spectra of {sup 14}N{sub 2}, {sup 15}N{sup 14}N, and {sup 15}N{sub 2} from 15.5 to 18.9 eV (65.6-80.0 nm) using the Advanced Light Source at Lawrence Berkeley National Laboratory show large differences in peak energies and intensities, with the ratio of the energy-dependent photoionization cross sections, {sigma}({sup 14}N{sub 2})/{sigma}({sup 15}N{sup 14}N), ranging from 0.4 to 3.5. Convolving the cross sections with the solar flux and integrating over the energies measured, the ratios of photoionization rate coefficients are J({sup 15}N{sup 14}N)/J({sup 14}N{sub 2}) = 1.00 {+-} 0.02 and J({sup 15}N{sub 2})/J({sup 14}N{sub 2}) = 1.00 {+-} 0.02, suggesting that isotopic fractionation between N{sub 2} and N{sub 2} {sup +} should be small under such conditions. In contrast, in a one-dimensional model of Titan's atmosphere, isotopic self-shielding of {sup 14}N{sub 2} leads to values of J({sup 15}N{sup 14}N)/J({sup 14}N{sub 2}) as large as {approx}1.17, larger than under optically thin conditions but still much smaller than values as high as {approx}29 predicted for N{sub 2} photodissociation. Since modeled photodissociation isotope effects overpredict the HC{sup 15}N/HC{sup 14}N ratio in Titan's atmosphere, and since both N atoms and N{sub 2} {sup +} ions may ultimately lead to the formation of HCN, estimates of the potential of including N{sub 2} photoionization to contribute to a more quantitative explanation of {sup 15}N/{sup 14}N for HCN in Titan's atmosphere are explored.

74 ATOMIC AND MOLECULAR PHYSICS↗

Comparison of Forest Soil Carbon Dynamics at Five Sites Along a Latitudinal Gradient

Carbon stocks, and C:N ratios, were measured in the forest floor, mineral soil, and two mineral soil fractions (particulate and mineral-associated organic matter, POM and MOM, respectively) at five forest sites, ranging from 60 to 100 years old, along a latitudinal gradient in the eastern United States. Sampling at four sites was replicated over two consecutive years. For many measurements (like forest floor carbon stocks, cumulative soil organic carbon stocks to 20 cm, and the fraction of whole soil carbon in POM), there was no significant difference between years at each site despite the use of somewhat different sampling methods. With one exception, forest floor and mineral soil carbon stocks increased from warm, southern, sites (with fine-textured soils) to northern, cool, sites (with more coarse-textured soils). The exception was a northern site, with less than 10% silt-clay content, that had a soil organic carbon stock similar to those measured at southern sites. Soil carbon at each site was partitioned into two pools (labile and stable) on the basis of carbon measured in the forest floor and POM and MOM fractions from the mineral soil. A two-compartment steady-state model, with randomly varying parameter values, was used in probabilistic calculations to estimate the turnover time of labile soil organic carbon (MRTU) and the annual transfer of labile carbon to stable carbon (k2) at each site in two different years. Based on empirical data, the turnover time of stable soil carbon (MRTS) was determined by mean annual temperature and increased from 30 to 100 years from south to north. Moving from south to north, MRTU increased from approximately 5 to 14 years. Consistent with prior studies, 13C enrichment factors ( ) from the Rayleigh equation, that describe the rate of change in 13C through the soil profile, were an indicator of soil carbon turnover times along the latitudinal gradient. Consistent with its role in stabilization of soil organic carbon, silt-clay content along the gradient was positively correlated (r = 0.91; P 0.001) with parameter k2. Mean annual temperature was indicated as the environmental factor most strongly associated with south to north differences in the storage and turnover of labile soil carbon. However, soil texture appeared to override the influence of temperature when there was too little silt-clay content to stabilize labile soil carbon and thereby protect it from decomposition. Irrespective of latitudinal differences in measured soil carbon stocks, each study site had a relatively high proportion of labile soil carbon (approximately 50% of whole soil carbon to a depth of 20 cm). Depending on unknown temperature sensitivities, large labile pools of forest soil carbon are potentially at risk of depletion by decomposition in a warming climate, and losses could be disproportionately higher from coarse textured forest soils.

54 ENVIRONMENTAL SCIENCES↗

Consequence of doping mediated strain and the activation energy on the structural and optical properties of ZnO:Cr nanoparticles

We report on the sol-gel synthesis of Zn{sub 1-x}Cr{sub x}O (x=0.0, 0.05, 0.10, 0.15 and 0.20) nanoparticles. These nanoparticles were characterized by using thermogravimetry/differential scanning calorimetry (TG/DSC), X-ray diffraction (XRD), transmission electron microscopy (TEM), Raman and Photoluminescence (PL). Electronegativity of Cr ions (Cr{sup 3+}) reduces the final decomposition temperature by 40 {sup o}C and activation energy of the reaction when Cr is doped into ZnO. Doping of higher Cr concentration (x{>=}0.10) into ZnO shows formation of secondary spinel (ZnCr{sub 2}O{sub 4}) phase along with the hexagonal (ZnO) and is revealed by XRD. Formation of secondary phase changes the activation energy of the reaction and thus the strain in ZnO lattice. In Raman spectra, additional Raman modes have been observed for Zn{sub 1-x}Cr{sub x}O nanoparticles, which can be assigned to the modes generated due to Cr doping. The Cr doping into ZnO is also supported by PL, in which vacancies are formed with Cr ion incorporation and emission band shifts towards higher wavelength. - Graphical abstract: Cr-doped ZnO nanostructures were synthesized by sol-gel. XRD (a) revealed secondary phase of ZnCr{sub 2}O{sub 4} with increase in Cr concentration. The Cr concentration also changes activation energy of the reaction (b).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Numerical studies and metric development for validation of magnetohydrodynamic models on the HIT-SI experiment

We present application of three scalar metrics derived from the Biorthogonal Decomposition (BD) technique to evaluate the level of agreement between macroscopic plasma dynamics in different data sets. BD decomposes large data sets, as produced by distributed diagnostic arrays, into principal mode structures without assumptions on spatial or temporal structure. These metrics have been applied to validation of the Hall-MHD model using experimental data from the Helicity Injected Torus with Steady Inductive helicity injection experiment. Each metric provides a measure of correlation between mode structures extracted from experimental data and simulations for an array of 192 surface-mounted magnetic probes. Numerical validation studies have been performed using the NIMROD code, where the injectors are modeled as boundary conditions on the flux conserver, and the PSI-TET code, where the entire plasma volume is treated. Initial results from a comprehensive validation study of high performance operation with different injector frequencies are presented, illustrating application of the BD method. Using a simplified (constant, uniform density and temperature) Hall-MHD model, simulation results agree with experimental observation for two of the three defined metrics when the injectors are driven with a frequency of 14.5 kHz.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Interaction of light with the ZnO surface: Photon induced oxygen “breathing,” oxygen vacancies, persistent photoconductivity, and persistent photovoltage

ZnO surfaces adsorb oxygen in the dark and emit CO{sub 2} when exposed to white light, reminiscent of the lungs of living creatures. We find that this exchange of oxygen with the ambient affects the integrity of the ZnO surface. Thus, it forms a basis for several interesting surface phenomena in ZnO, such as photoconductivity, photovoltage, and gas sensing, and has a role in ZnO electrical conduction. Using x-ray photoelectron spectroscopy on ZnO nanowires, we observed a decomposition of ZnO under white light and formation of oxygen-depleted surface, which explains photoconductivity by the electron donation of oxygen vacancies. Our findings suggest that the observed decomposition of the ZnO lattice may only take place due to photon-induced reduction of ZnO by carbon containing molecules (or carbo-photonic reduction), possibly from the ambient gas, accounting in a consistent way for both the reduced demands on the energy required for decomposition and for the observed emission of lattice oxygen in the form of CO{sub 2}. The formation of oxygen-vacancy rich surface is suggested to induce surface delta doping, causing accumulation of electrons at the surface, which accounts for both the increase in conductivity and the flattening of the energy bands. Using surface photovoltage spectroscopy in ultra high vacuum, we monitored changes in the deep level spectrum. We observe a wide optical transition from a deep acceptor to the conduction band, which energy position coincides with the position of the so called “green luminescence” in ZnO. This green transition disappears with the formation of surface oxygen vacancies. Since the oxygen vacancies are donors, while the green transition involves surface acceptors, the results suggest that the initial emission of oxygen originates at the defect sites of the latter, thereby eliminating each other. This suggests that the green transition originates at surface Zn vacancy acceptors. Removing an oxygen atom from a Zn vacancy completes the vacancy to become a full ZnO molecule vacancy, which does not produce deep levels. Our results explain why ZnO finds use as an electrical detector for oxygen and for carbon containing gas molecules. They may also shed new light on photocatalytic uses of ZnO. It is suggested that similar surface phenomena may affect other semiconducting oxides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal annealing synthesis of titanium-dioxide nanowire-nanoparticle hetero-structures

Crystalline TiO{sub 2} nanowire-nanoparticle hetero-structures were successfully synthesized from titanium foils by using a simple thermal annealing method with the aid of CuCl{sub 2} at the atmospheric pressure. Nanowires were grown from Ti foils by simply annealing Ti foils at 850 {sup o}C. Then, TiCl{sub 4} was delivered to TiO{sub 2} nanowires so as to precipitate TiO{sub 2} nanoparticles on nanowire surfaces. At 750 {sup o}C reaction temperature, nanoparticles of tens of nanometers in diameter were well distributed on pre-grown nanowire forests. Nanoparticles were likely to be precipitated by TiCl{sub 4} decomposition or oxidation and that require high temperatures above {approx}650 {sup o}C. Electron microscopy, X-ray diffraction, and UV-vis spectroscopy analyses show they have the rutile polycrystalline structure with a slightly enlarged bandgap compared to that of bulk TiO{sub 2}. The influence of key synthesis parameters including reaction temperature, reaction time, and quantity of supplied materials on the incorporating nanoparticles was also systematically studied. The optimum reaction condition in the present paper was identified to be 750 {sup o}C annealing with repetitive 20 min reactions. A higher reaction temperature yielded larger diameter particles, and higher loading of Ti produced dense particles without changing the particle size. Finally, this method could be utilized for synthesizing other metal oxide nanowires-nanoparticle hetero-structures. - Graphical abstract: Schematic of proposed reaction mechanisms for synthesizing the hetero-structures: (a) TiO{sub 2} nanowires were grown as base structures for capturing TiCl{sub 4} gas. (b) TiCl{sub 4} gas was oxidized, precipitating crystalline TiO{sub 2} nanoparticles. (c) Repeated particle-incorporation process created tree-like hetero-structures.

36 MATERIALS SCIENCE↗

Ceramic Proppant Design for In-situ Microbially Enhanced Methane Recovery

This project designed a new type of multi-functional lightweight proppant. The proppant is utilized as the conventional lightweight proppant but also transports microorganisms to coalbed reservoirs. The proppant is coated with a polymer which protects the methanogenic microorganisms and serves as a time-release delivery for methane generation. To produce the multifunctional proppant, we assigned five tasks: 1) culturing methanogenic microbes from natural carbon sources; 2) identifying optimized growth and methanogenesis conditions for the microbial consortia; 3) synthesizing the lightweight ceramic proppant; 4) encapsulating the consortia and proppant; and 5) demonstrating lab scale simulated performance by monitoring in-situ methane generation and hydraulic conductivity. Task 1) To evaluate the feasibility of ex-situ cultivation, natural microbial populations were collected from various hydrocarbon-rich environments and locations characterized by natural methanogenesis. Different rank coals, complex hydrocarbon sources, hydrocarbon seeps, and natural biogenic environments were incorporated in the sampling. Three levels of screening allowed selection of microbial populations, favorable nutrient amendments, sources of the microbial community, and quantification of methane produced from various coal types. Incubation periods of up to 24 weeks were evaluated at 23°C. Headspace concentrations of CH 4 and CO 2 were analyzed by gas chromatography. After a two-week incubation period of the most promising microbes, generated headspace gas concentrations reached 873,400 ppm for methane and 176,370 ppm for carbon dioxide. Task 2) A central composite design (CCD) was used to explore a broad range of operational conditions, examine the effects of the important environmental factors, such as temperature, pH and salt concentration, and query a feasible region of operation to maximize methane production from coal. Coal biogasification was optimal for this consortium at an initial pH value of 5.5, at 30 °C, and at a NaCl concentration 3.7 mg/cm 3 (i.e., 145,165 ppm). Task 3) To create the lightweight ceramic proppant, the kaolinite and iron oxide (Fe 2 O 3 ) mixture were sintered under reducing atmosphere varying partial pressures of oxygen from 1.7×10 -13 atm to 1.8×10-11 atm. The Fe 2 O 3 reduces to FeO and reacts with kaolinite decomposed to mullite to form Fe 2 SiO 4 , FeSiO 3 , and FeAl 2 O 4 . As a result the proppant develops large pores (~100 µm), giving it a low bulk density (1.43 g/cm 3 ), and high porosity (45.2 vol%) at P_(O_2 )of 1.8×10 -11 atm. The proppant sintered at P_(O_2 )of 1.7×10 -13 atm is characterized by smaller pores (26 µm), higher density (1.72 g/cm3) and lower porosity (37.5 vol%). Crush resistance testing at 9,000 psi yields 6.8 wt% fine particles increasing to 17.7 wt% in porous samples. Acid solubility varies from 5.5 wt% loss increasing to 12.9 wt% in porous samples. Task 4 and 5) The microbial consortia obtained from the optimized condition and lightweight proppant were encapsulated by calcium-alginate polymer. The encapsulation system, including microbes and a proppant, was stored at 20°C and 36°C. The sample stored at 36°C generated 7.1×[10] 3 ppm of methane at 670 h, whereas the sample incubated at 20°C generated 1.1×[10] 3 ppm of methane. Benchtop lab-scale bioreactors were constructed and showed with real-time measurements that, as the microbes produced methane, the pH decreased, and hydrogen and carbon dioxide gases were consumed. A calcium ion-selective sensor revealed the release mechanism of the microbes from encapsulation. The calcium ions interconnecting the alginate monomers were disassociated by counter cations such as protons and potassium ions. The counter cations bound to the carboxyl group on the alginate monomer, which thus lost its ionic interactions with the calcium ions, resulting in decomposition of the hydrogel structure. Furthermore, the conductivity was increased to ~700 mD-ft from ~530 mD-ft once the encapsulated sample was applied to the coal pack. The particle size of coal was reduced when the encapsulated sample was added to the coal. The reduced coal size implied that the microbes would consume the hydrocarbon in coal.

01 COAL, LIGNITE, AND PEAT↗

A Scalable Process for Upcycling Carbon Dioxide (CO 2 ) and Coal Combustion Residues into Construction Products

Anthropogenic sources of carbon dioxide are generated from a number of sources, but the key among these are ordinary Portland cement (OPC) production and combustion of fossil fuels. Cement production is the largest global CO 2 source from the mineral decomposition of carbonates. Combination of the limestone decomposition and thermal requirements of the clinkering process causes cement production to contribute 8-9% of annual global CO 2 emissions. Combustion of fossil fuels (coal, oil and gas) was shown to contribute a much larger portion of global CO 2 emissions. As of 2018, combustion of fossil fuels accounted for 65% of global CO 2 , where 41% was derived from stationary sources for electricity and heat generation and the other 24% was related to transport. To reduce these contributions, key steps forward in CO 2 utilization technologies are required. The purpose of this project is to demonstrate the feasibility of the Reversa process evolving from a TRL-3 technology at the bench-scale up to TRL-6 technology at the pilot-scale. The reliability of the Reversa technology was tested to prove the effective production of concrete masonry units (CMUs) at bench scale, where the units exceeded the required 13.8 MPa compressive strength requirements. The overall goal of this project was to accelerate the development of a CO 2 mineralization process that synergistically utilizes CO 2 in flue gas and coal combustion residues (CCRs) to synthesize carbonated concrete, a functional replacement for traditional concrete. The culmination of this work resulted in 12 successful production runs at the Integrated Test Center (ITC), Gillette, WY using coal flue gas as a CO 2 source. This was followed by 6 production runs which were completed at the National Carbon Capture Center (NCCC), Wilsonville, AL, using coal-fired and natural gas (NG) flue gas as the CO 2 source. Over the course of the production runs at NCCC and ITC, the CO 2 utilization as a function of time, 24-h CO 2 uptake, electricity usage, and 28-d net area compressive strength recorded for each run. The ITC and NCCC demonstrations achieved an average of 0.19 and 0.1 g CO 2 /g reactant, respectively. Both demonstrations exceeded the project’s target goals of uptake > 0.05 g CO 2 /g reactant. Average compressive strength of the ITC blocks was 18.24 MPa at 28-days. This exceeded the target strength of 13.8 MPa specified by ASTM C90. ITC and NCCC produced an average CO 2 utilization efficiency of 74.9 and 57.9%, respectively. Both demonstration averages were within the target range of 50 to 90% utilization efficiency. For some production runs the NCCC demo did exceeded the a CO 2 utilization efficiency of 75%. An LCA of the Reversa process compared to an industry standard product revealed a net CO 2 reduction of 39% to 42%. This exceeded the target requirement of >25% net CO 2 reduction. Collection of this data was used to determine that the project was successful as the demonstration goals were achieved: (1) achieving in excess of 75% CO 2 utilization efficiency, (2) utilizing greater than 250 kg of CO 2 per production batch/run, and (3) ensuring compliance of carbonated blocks with industry standard specifications (ASTM C90).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗