Search NASA⌕ Search

SEARCH · Search NASA

Results for “root modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Investigating the interconnectedness of active transportation and public transit usage as a primer for Mobility-as-a-Service adoption and deployment

With the advent of Mobility-as-a-Service packages to reduce car usage and (by extension) greenhouse gas emissions, it is crucial that researchers and practitioners consider mutual determinants and outcomes that link the adoption of multiple alternative modes. This study therefore investigates the joint usage of active travel (walking, cycling, bike-sharing) and public transit (bus, rail) modes with respect to personal and situational contexts. Online survey data (n = 826) were collected across six Midwestern U.S. states using Amazon MTurk. Respondents indicated their average weekly usage of eight travel modes across three trip purposes so that multimodality could be assessed. Several psychological constructs were extracted via (a) the stages of change framework, used to indicate willingness to adopt new behavior, and (b) confirmatory factor analysis conducted on Likert scales rooted in theories of community, identity, norms, personality, and well-being. A multiple-indicators multiple-causes structural equation model is then employed to investigate the process of adopting a modality style that incorporates active and transit modes. The model confirms that compatible physical and social contexts, as well as navigational skills and openness to learning, are key primers of multimodalism. However, a path juncture stemming from neighborhood support for mobility innovation illustrates a potential polarity in outcomes between individuals and communities. In addition, the stage of active mobility adoption is linked to identity and norm activation, offering further guidance on what influences readiness for change. The seamless integration of mobility services is critical to matching the convenience and comfort of the private vehicle; understanding potential pathways to sustainable mobility, though, requires analyses and interventions that are driven by well-being outcomes and grounded in rigorous psychological frameworks. Here, the research findings offer practical guidance for identifying intervention opportunities to be linked with MaaS enrollment while demonstrating the need to illuminate how mobility might relate to social cohesion, identity expression, and various sources of satisfaction.

42 ENGINEERING↗

Prospects for early discoveries at the LHC with dileptons, jets and no missing energy with the ATLAS detector

This article describes a search for leptoquark pair production and a right-handed W in the cascade decay W{sub R}->lN{sub l}->lqlq in final states containing two leptons, additional jets and no missing transverse energy. Both final states with two electrons and two muons are studied. With a center of mass energy of sq root(s) = 14 TeV leptoquarks with masses up to 500-600 GeV and the studied scenarios of left-right symmetric models (LRSM) with W{sub R} masses up to 1800 GeV can be discovered with about 100 pb{sup -1}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Isotope-enriched protein standards for computational amide I spectroscopy

We present a systematic isotope labeling study of the protein G mutant NuG2b as a step toward the production of reliable, structurally stable, experimental standards for amide I infrared spectroscopic simulations. By introducing isotope enriched amino acids into a minimal growth medium during bacterial expression, we induce uniform labeling of the amide bonds following specific amino acids, avoiding the need for chemical peptide synthesis. We use experimental data to test several common amide I frequency maps and explore the influence of various factors on map performance. Comparison of the predicted absorption frequencies for the four maps tested with empirical assignments to our experimental spectra yields a root-mean-square error of 6-12 cm{sup −1}, with outliers of at least 12 cm{sup −1} in all models. This means that the predictions may be useful for predicting general trends such as changes in hydrogen bonding configuration; however, for finer structural constraints or absolute frequency assignments, the models are unreliable. The results indicate the need for careful testing of existing literature maps and shed light on possible next steps for the development of quantitative spectral maps.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Testing theories of gravitation using 21-year timing of pulsar binary J1713+0747

We report 21-year timing of one of the most precise pulsars: PSR J1713+0747. Its pulse times of arrival are well modeled by a comprehensive pulsar binary model including its three-dimensional orbit and a noise model that incorporates short- and long-timescale correlated noise such as jitter and red noise. Its timing residuals have weighted root mean square ∼92 ns. The new data set allows us to update and improve previous measurements of the system properties, including the masses of the neutron star (1.31 ± 0.11 M{sub ⊙}) and the companion white dwarf (0.286 ± 0.012 M{sub ⊙}) as well as their parallax distance 1.15 ± 0.03 kpc. We measured the intrinsic change in orbital period, P-dot {sub b}{sup Int}, is −0.20 ± 0.17 ps s{sup −1}, which is not distinguishable from zero. This result, combined with the measured P-dot {sub b}{sup Int} of other pulsars, can place a generic limit on potential changes in the gravitational constant G. We found that G-dot /G is consistent with zero [(−0.6 ± 1.1) × 10{sup −12} yr{sup −1}, 95% confidence] and changes at least a factor of 31 (99.7% confidence) more slowly than the average expansion rate of the universe. This is the best G-dot /G limit from pulsar binary systems. The P-dot {sub b}{sup Int} of pulsar binaries can also place limits on the putative coupling constant for dipole gravitational radiation κ{sub D}=(−0.9±3.3)×10{sup −4} (95% confidence). Finally, the nearly circular orbit of this pulsar binary allows us to constrain statistically the strong-field post-Newtonian parameters Δ, which describes the violation of strong equivalence principle, and α-hat {sub 3}, which describes a breaking of both Lorentz invariance in gravitation and conservation of momentum. We found, at 95% confidence, Δ<0.01 and α-hat {sub 3}<2×10{sup −20} based on PSR J1713+0747.

79 ASTRONOMY AND ASTROPHYSICS↗

Search for Next-to-Minimal Supersymmetric Higgs Bosons in the h->aa->{mu}{mu}{mu}{mu}, {mu}{mu}{tau}{tau} Channels Using pp Collisions at sq root(s)=1.96 TeV

We report on a first search for production of the lightest neutral CP-even Higgs boson (h) in the next-to-minimal supersymmetric standard model, where h decays to a pair of neutral pseudoscalar Higgs bosons (a), using 4.2 fb{sup -1} of data recorded with the D0 detector at Fermilab. The a bosons are required to either both decay to {mu}{sup +}{mu}{sup -} or one to {mu}{sup +}{mu}{sup -} and the other to {tau}{sup +}{tau}{sup -}. No significant signal is observed, and we set limits on its production as functions of M{sub a} and M{sub h}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DNA methylation and gene expression regulation associated with vascularization in Sorghum bicolor

Plant secondary cell walls constitute the majority of plant biomass. They are predominantly found in xylem cells, which are derived from vascular initials during vascularization. Little is known about these processes in grass species despite their emerging importance as biomass feedstocks. The targeted biofuel crop Sorghum bicolor has a sequenced and well-annotated genome, making it an ideal monocot model for addressing vascularization and biomass deposition. Here we generated tissue-specific transcriptome and DNA methylome data from sorghum shoots, roots and developing root vascular and nonvascular tissues. Many genes associated with vascular development in other species show enriched expression in developing vasculature. However, several transcription factor families varied in vascular expression in sorghum compared with Arabidopsis and maize. Furthermore, differential expression of genes associated with DNA methylation were identified between vascular and nonvascular tissues, implying that changes in DNA methylation are a feature of sorghum root vascularization, which we confirmed using tissue-specific DNA methylome data. Roots treated with a DNA methylation inhibitor also showed a significant decrease in root length. Tissues and organs can be discriminated based on their genomic methylation patterns and methylation context. Consequently, tissue-specific changes in DNA methylation are part of the normal developmental process.

59 BASIC BIOLOGICAL SCIENCES↗

Breaking the reproducibility barrier with standardized protocols for plant–microbiome research

Inter-laboratory replicability is crucial yet challenging in microbiome research. Leveraging microbiomes to promote soil health and plant growth requires understanding underlying molecular mechanisms using reproducible experimental systems. In a global collaborative effort involving five laboratories, we aimed to help advance reproducibility in microbiome studies by testing our ability to replicate synthetic community assembly experiments. Our study compared fabricated ecosystems constructed using two different synthetic bacterial communities, the model grass Brachypodium distachyon, and sterile EcoFAB 2.0 devices. All participating laboratories observed consistent inoculum-dependent changes in plant phenotype, root exudate composition, and final bacterial community structure, where Paraburkholderia sp. OAS925 could dramatically shift microbiome composition. Comparative genomics and exudate utilization linked the pH-dependent colonization ability of Paraburkholderia, which was further confirmed with motility assays. The study provides detailed protocols, benchmarking datasets, and best practices to help advance replicable science and inform future multi-laboratory reproducibility studies.

Novak, Vlastimil↗

Remaining Useful Strength (RUS) Prediction of SiCf-SiCm Composite Materials Using Deep Learning and Acoustic Emission

Prognosis techniques for prediction of remaining useful life (RUL) are of crucial importance to the management of complex systems for they can lead to appropriate maintenance interventions and improvements in reliability. While various data-driven methods have been introduced to predict the remaining useful life (RUL) of machinery systems or batteries, no research has been reported on the remaining useful strength (RUS) prediction of silicon carbide fiber reinforced silicon carbide matrix (SiCf-SiCm) materials with pivotal role in its potential usage as a structural material in nuclear reactors and turbine engines. Knowledge of its degradation process is of the utmost importance to the manufacturers. For this purpose, two approaches based on the machine-learning techniques of random-forest (RF) and convolutional neural network (CNN) are proposed to predict the RUS of SiCf-SiCm using only acoustic emission (AE) signals generated during the material’s stress applying process. Experimental results show that the CNN models achieved better predictive performance than the RF models but the latter with expert-engineered features achieves better prediction for AE signals in the early stage of degradation. Additionally, our results demonstrate that both models can correctly predict the SiCf-SiCm RUS as evaluated by our robust testing method from which the best average root mean square error (RMSE) and Pearson correlation coefficient of 3.55 ksi units and 0.85 were obtained.

36 MATERIALS SCIENCE↗

Diffusion with chemical reaction: An attempt to explain number density anomalies in experiments involving alkali vapor

The mutual diffusion of two reacting gases is examined which takes place in a bath of inert gas atoms. Solutions are obtained between concentric spheres, each sphere acting as a source for one of the reactants. The calculational model is used to illustrate severe number density gradients observed in absorption experiments with alkali vapor. Severe gradients result when sq root k/D R is approximately 5 where k, D, and R are respectively the second order rate constant, the multicomponent diffusion constant, and the geometrical dimension of the experiment.

Snow, W. L.↗

Advanced manufacturing development of a composite empennage component for l-1011 aircraft

Tooling concepts were developed which would permit co-couring of the hat stiffeners to the skin to form the cover assembly in a single autoclave cycle. These tooling concepts include the use of solid rubber mandrels, foam mandrels, and formed elastometric bladders. A simplification of the root end design of the cover hat stiffeners was accomplished in order to facilitate fabrication. The conversion of the 3D NASTRAN model from level 15 to level 16 was completed and a successful check run accomplished. A detailed analysis of the thermal load requirement for the environmental chambers was carried out. Based on the thermal analysis, best function requirements, load inputs and ease of access, a system involving four chambers, two for the covers containing 6 and 4 specimens, respectively, and two for the spares containing 6 and 4 specimens, respectively, evolved.

Source record↗

Aerodynamic tailoring of the Learjet Model 60 wing

The wing of the Learjet Model 60 was tailored for improved aerodynamic characteristics using the TRANAIR transonic full-potential computational fluid dynamics (CFD) code. A root leading edge glove and wing tip fairing were shaped to reduce shock strength, improve cruise drag and extend the buffet limit. The aerodynamic design was validated by wind tunnel test and flight test data.

Chandrasekharan, Reuben M.↗

Investigation of an Anomaly Observed in Impedance Eduction Techniques

An intensive investigation into the cause of anomalous behavior commonly observed in impedance eduction techniques is performed. The investigation consists of grid refinement studies, detailed evaluation of results at and near anti-resonance frequencies, comparisons of different model results with synthesized and measured data, assessment or optimization techniques, and evaluation or boundary condition effects. Results show that the root cause of the anomalous behavior is the sensitivity of the educed impedance to small errors in the measured termination resistance at frequencies near anti-resonance or cut-on of a higher-order mode. Evidence is presented to show that the common usage of an anechoic, plane wave termination boundary condition in ducts where the "true" termination is reflective may act as a trigger for these anomalies. Replacing the exit impedance boundary condition by an exit pressure condition is shown to reduce the anomalous results.

Watson, W. R.↗

Systems Engineering on the James Webb Space Telescope

The James Web Space Telescope (JWST) is a large, infrared-optimized space telescope scheduled for launch in 2014. System-level verification of critical performance requirements will rely on integrated observatory models that predict the wavefront error accurately enough to verify that allocated top-level wavefront error of 150 nm root-mean-squared (rms) through to the wave-front sensor focal plane is met. This paper describes the systems engineering approach used on the JWST through the detailed design phase.

Menzel, Michael T.↗

Generation of Fullspan Leading-Edge 3D Ice Shapes for Swept-Wing Aerodynamic Testing

The deleterious effect of ice accretion on aircraft is often assessed through dry-air flight and wind tunnel testing with artificial ice shapes. This paper describes a method to create fullspan swept-wing artificial ice shapes from partial span ice segments acquired in the NASA Glenn Icing Reserch Tunnel for aerodynamic wind-tunnel testing. Full-scale ice accretion segments were laser scanned from the Inboard, Midspan, and Outboard wing station models of the 65% scale Common Research Model (CRM65) aircraft configuration. These were interpolated and extrapolated using a weighted averaging method to generate fullspan ice shapes from the root to the tip of the CRM65 wing. The results showed that this interpolation method was able to preserve many of the highly three dimensional features typically found on swept-wing ice accretions. The interpolated fullspan ice shapes were then scaled to fit the leading edge of a 8.9% scale version of the CRM65 wing for aerodynamic wind-tunnel testing. Reduced fidelity versions of the fullspan ice shapes were also created where most of the local three-dimensional features were removed. The fullspan artificial ice shapes and the reduced fidelity versions were manufactured using stereolithography.

Icing↗

Shape Validation and RF Performance of Inflatable Antennas

Inflatable aperture antennas are an emerging technology that is being investigated for potential use in science and exploration missions. In particular, for missions to Mars and beyond, large deployable aperture antennas can provide the antenna gain required for high data rate communications, where the necessary antenna diameter exceeds the available volume of typical launch vehicle platforms. As inflatable aperture antennas have not been proven fully qualified for space missions, the author's Master's Thesis assessed the Ruze equation in characterizing this antenna technology. Inflatable aperture antennas do not follow a parabolic shape, and so the Ruze equation is not applicable due to the macroscopic shape errors of this technology. Therefore, geometric evaluations of the surface profile cannot simply correlate antenna gain degradation with the root-mean-square shape error with a parabolic surface. Consequently, the focus of this work was to derive an accurate mathematical model of an inflatable aperture antenna in order to characterize its Radio Frequency (RF) performance. Calculus of Variations methodologies were used to derive the surface profile shape of the inflatable aperture antenna. Physical Optics techniques were used to generate the antenna pattern profile. Validation testing of the predicted inflatable antenna shape model was performed through use of Laser Radar metrology measurements on an inflatable test article. Assessments of the RF performance of the inflatable aperture antenna, compared with nominally shaped paraboloidal antennas, were obtained through simulations of both technologies using a common diameter, depth, and arc length. Assessments of the RF performance of the inflatable aperture antenna was also performed against itself for changes in distance of the antenna feed location in the axial direction. Whereas the Ruze equation is limited to assessing gain reduction, this effort will also assess beam spreading and first side lobe angle and magnitude. The ability to characterize the RF response of this antenna will provide for an improved understanding of this technology. The accurate representation of the shape of this type of antenna technology will help to identify the most appropriate ways in which this technology could be utilized in planning future communication architectures for NASA missions to Mars and beyond.

Welch, Bryan W.↗

Shape Validation and RF Performance of Inflatable Antennas

Inflatable aperture antennas are an emerging technology that is being investigated for potential use in science and exploration missions. In particular, for missions to Mars and beyond, large deployable aperture antennas can provide the antenna gain required for high data rate communications, where the necessary antenna diameter exceeds the available volume of typical launch vehicle platforms. As inflatable aperture antennas have not been proven fully qualified for space missions, the author's Master's Thesis assessed the Ruze equation in characterizing this antenna technology. Inflatable aperture antennas do not follow a parabolic shape, and so the Ruze equation is not applicable due to the macroscopic shape errors of this technology. Therefore, geometric evaluations of the surface profile cannot simply correlate antenna gain degradation with the root-mean square shape error with a parabolic surface. Consequently, the focus of this work was to derive an accurate mathematical model of an inflatable aperture antenna to in order to characterize its Radio Frequency (RF) performance. Calculus of Variations methodologies were used to derive the surface profile shape of the inflatable aperture antenna. Physical Optics techniques were used to generate the antenna pattern profile. Validation testing of the predicted inflatable antenna shape model was performed through use of Laser Radar metrology measurements on an inflatable test article. Assessments of the RF performance of the inflatable aperture antenna, compared with nominally shaped paraboloidal antennas, were obtained through simulations of both technologies using a common diameter, depth, and arc length. Assessments of the RF performance of the inflatable aperture antenna was also performed against itself for changes in distance of the antenna feed location in the axial direction. Whereas the Ruze equation is limited to assessing gain reduction, this effort will also assess beam spreading and first side lobe angle and magnitude. The ability to characterize the RF response of this antenna will provide for an improved understanding of this technology. The accurate representation of the shape of this type of antenna technology will help to identify the most appropriate ways in which this technology could be utilized in planning future communication architectures for NASA missions to Mars and beyond.

Welch, Bryan↗

A Spectrum Sensor for CubeSat Radios

Cube satellite (CubeSat) launches have increased exponentially over the last 20 years. This class of miniature spacecraft is well-suited for a set of nonconventional satellite architectures collectively known as formation flying. With the exponential pace of launches expected to continue, the prospect of spectrum management for these complex formations arises. In previous work, investigators focus on terrestrial applications of spectrum sensing, which have the luxury to utilize hardware with high size, weight, and power (SWaP) resources. In this work, we develop and test a spectrum sensor for CubeSat radio applications. Given that CubeSat radios are inherently designed for low SWaP, they cannot implement the computationally expensive spectral correlation analyzer (SCA) algorithms for signal detection. To that end, our investigation focuses on the application of the SCA to square-root-raised-cosine (SRRC) pulse-shaped quadrature amplitude modulation (QAM) waveforms using a field-programmable gate array (FPGA). This model requires no prior knowledge of the radio-frequency (RF) channel. We show that this model can consistently and accurately detect the symbol rate and center frequencies of waveforms located in a spectrum.

cubesat↗

Environmental Testing Of High Temperature Materials and Coatings

Materials for today′s extreme environments have unique challenges and design requirements that require multi-faceted evaluations. Thermal and mechanical testing and analysis is important in design, but environmental effects are often the limiting factor of materials in service. Degradation modes such as oxidation, recession, erosion, foreign object damage, and chemical corrosion can negatively impact the materials thermo-mechanical behavior. While materials may ultimately fail under thermo−mechanical stresses, environmental effects are many times the root cause. Evaluation of materials systems under relevant conditions are critical.....start by identifying mechanisms and develop corresponding test methods. Comprehensive modeling begins with thermo-mechanical behavior, then considers environmental degradation modes that provide a “knock down” of that behavior.

Thermal testing Mechanical testing↗