Search NASA⌕ Search

SEARCH · Search NASA

Results for “shape function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Attributes of Bi-Directional Turbomachinery for Pumped Thermal Energy Storage

Abstract In this paper, we (i) present a methodology for determining the aerodynamic performance of bi-directional turbomachines for pumped thermal energy storage, i.e., turbomachines designed to operate as a compressor in one direction, and then as a turbine in the opposite direction, (ii) carry out performance computations for such turbomachines, and (iii) propose principles for conceptual design of these devices. Focus is placed on using the energy storage cycle not only to identify the novel requirements placed on bi-directional turbomachines but also to estimate the effect of these requirements on the efficiency of the energy storage process. In particular, the difference between aerodynamic loading in forward and in backward operation causes the blading to work at incidences leading to the performance below maximum efficiency, resulting in a lower round-trip efficiency. The description of the design principles includes determination of the number of stages, definition of nondimensional parameters for blading selection, and optimization of two-dimensional blading for bi-directional operation. The assessment of stage count shows the relationship between relative Mach number, pressure ratio, and round-trip efficiency. The nondimensional parameters are assessed through a bi-directional analogue to existing “Smith charts,” for the efficiency of single-direction turbomachines, as a function of camber and stagger. The blade shape evaluation and optimization show how the blade profile can be modified to address the requirements of a bi-directional turbomachine, enabling an increase in round-trip efficiency of two percentage points compared to a baseline double circular arc configuration.

Engineering↗

Analytical expressions of the surface shape of ‘diaboloid’ mirrors

Modern deterministic polishing processes allow fabrication of x-ray optics with almost any arbitrary aspherical surface shape. Among these optics, the so called "diaboloid"mirror is of special interest. The diaboloid mirror that converts a cylindrical wave to a spherical wave would improve focusing in x-ray beamlines implementing a diffraction element between a parabolic cylinder and a toroidal mirror. The replacement of the toroidal mirror in existing beamlines by the diaboloid mirror would mitigate aberrations. The shape of the diaboloid mirror is usually calculated numerically based on a truncated polynomial solution of the optical path problem. Here, we present an exact analytical solution for the shape of a diaboloid mirror as a function of the conjugate parameters of the mirror placed in a beamline. The derived analytical expressions for the diaboloid mirror in both the canonical and mirror-based coordinate systems are implemented in ray-tracing simulations to verify the beamline performances.

Yashchuk, Valeriy V.↗

Response of LiF:Mg,Ti thermoluminescent dosimeters at photon energies relevant to the dosimetry of brachytherapy (<1 MeV)

Purpose: High energy photon beams are used in calibrating dosimeters for use in brachytherapy since absorbed dose to water can be determined accurately and with traceability to primary standards in such beams, using calibrated ion chambers and standard dosimetry protocols. For use in brachytherapy, beam quality correction factors are needed, which include corrections for differences in mass energy absorption properties between water and detector as well as variations in detector response (intrinsic efficiency) with radiation quality, caused by variations in the density of ionization (linear energy transfer (LET) -distributions) along the secondary electron tracks. The aim of this work was to investigate experimentally the detector response of LiF:Mg,Ti thermoluminescent dosimeters (TLD) for photon energies below 1 MeV relative to {sup 60}Co and to address discrepancies between the results found in recent publications of detector response. Methods: LiF:Mg,Ti dosimeters of formulation MTS-N Poland were irradiated to known values of air kerma free-in-air in x-ray beams at tube voltages 25-250 kV, in {sup 137}Cs- and {sup 60}Co-beams at the Swedish Secondary Standards Dosimetry Laboratory. Conversions from air kerma free-in-air into values of mean absorbed dose in the dosimeters in the actual irradiation geometries were made using EGSnrc Monte Carlo simulations. X-ray energy spectra were measured or calculated for the actual beams. Detector response relative to that for {sup 60}Co was determined at each beam quality. Results: An increase in relative response was seen for all beam qualities ranging from 8% at tube voltage 25 kV (effective energy 13 keV) to 3%-4% at 250 kV (122 keV effective energy) and {sup 137}Cs with a minimum at 80 keV effective energy (tube voltage 180 kV). The variation with effective energy was similar to that reported by Davis et al.[Radiat. Prot. Dosim. 106, 33-43 (2003)] with our values being systematically lower by 2%-4%. Compared to the results by Nunn et al.[Med. Phys. 35, 1861-1869 (2008)], the relative detector response as a function of effective energy differed in both shape and magnitude. This could be explained by the higher maximum read-out temperature (350 deg. C) used by Nunn et al.[Med. Phys. 35, 1861-1869 (2008)], allowing light emitted from high-temperature peaks with a strong LET dependence to be registered. Use of TLD-100 by Davis et al.[Radiat. Prot. Dosim. 106, 33-43 (2003)] with a stronger super-linear dose response compared to MTS-N was identified as causing the lower relative detector response in this work. Conclusions: Both careful dosimetry and strict protocols for handling the TLDs are required to reach solid experimental data on relative detector response. This work confirms older findings that an over-response relative to {sup 60}Co exists for photon energies below 200-300 keV. Comparison with the results from the literature indicates that using similar protocols for annealing and read-out, dosimeters of different makes (TLD-100, MTS-N) differ in relative detector response. Though universality of the results has not been proven and further investigation is needed, it is anticipated that with the use of strict protocols for annealing and read-out, it will be possible to determine correction factors that can be used to reduce uncertainties in dose measurements around brachytherapy sources at photon energies where primary standards for absorbed dose to water are not available.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A comprehensive formulation for volumetric modulated arc therapy planning

Purpose: Volumetric modulated arc therapy (VMAT) is a widely employed radiation therapy technique, showing comparable dosimetry to static beam intensity modulated radiation therapy (IMRT) with reduced monitor units and treatment time. However, the current VMAT optimization has various greedy heuristics employed for an empirical solution, which jeopardizes plan consistency and quality. The authors introduce a novel direct aperture optimization method for VMAT to overcome these limitations. Methods: The comprehensive VMAT (comVMAT) planning was formulated as an optimization problem with an L2-norm fidelity term to penalize the difference between the optimized dose and the prescribed dose, as well as an anisotropic total variation term to promote piecewise continuity in the fluence maps, preparing it for direct aperture optimization. A level set function was used to describe the aperture shapes and the difference between aperture shapes at adjacent angles was penalized to control MLC motion range. A proximal-class optimization solver was adopted to solve the large scale optimization problem, and an alternating optimization strategy was implemented to solve the fluence intensity and aperture shapes simultaneously. Single arc comVMAT plans, utilizing 180 beams with 2° angular resolution, were generated for a glioblastoma multiforme case, a lung (LNG) case, and two head and neck cases—one with three PTVs (H&N{sub 3PTV}) and one with foue PTVs (H&N{sub 4PTV})—to test the efficacy. The plans were optimized using an alternating optimization strategy. The plans were compared against the clinical VMAT (clnVMAT) plans utilizing two overlapping coplanar arcs for treatment. Results: The optimization of the comVMAT plans had converged within 600 iterations of the block minimization algorithm. comVMAT plans were able to consistently reduce the dose to all organs-at-risk (OARs) as compared to the clnVMAT plans. On average, comVMAT plans reduced the max and mean OAR dose by 6.59% and 7.45%, respectively, of the prescription dose. Reductions in max dose and mean dose were as high as 14.5 Gy in the LNG case and 15.3 Gy in the H&N{sub 3PTV} case. PTV coverages measured by D95, D98, and D99 were within 0.25% of the prescription dose. By comprehensively optimizing all beams, the comVMAT optimizer gained the freedom to allow some selected beams to deliver higher intensities, yielding a dose distribution that resembles a static beam IMRT plan with beam orientation optimization. Conclusions: The novel nongreedy VMAT approach simultaneously optimizes all beams in an arc and then directly generates deliverable apertures. The single arc VMAT approach thus fully utilizes the digital Linac’s capability in dose rate and gantry rotation speed modulation. In practice, the new single VMAT algorithm generates plans superior to existing VMAT algorithms utilizing two arcs.

60 APPLIED LIFE SCIENCES↗

MO-AB-BRA-01: A Global Level Set Based Formulation for Volumetric Modulated Arc Therapy

Purpose: The current clinical Volumetric Modulated Arc Therapy (VMAT) optimization is formulated as a non-convex problem and various greedy heuristics have been employed for an empirical solution, jeopardizing plan consistency and quality. We introduce a novel global direct aperture optimization method for VMAT to overcome these limitations. Methods: The global VMAT (gVMAT) planning was formulated as an optimization problem with an L2-norm fidelity term and an anisotropic total variation term. A level set function was used to describe the aperture shapes and adjacent aperture shapes were penalized to control MLC motion range. An alternating optimization strategy was implemented to solve the fluence intensity and aperture shapes simultaneously. Single arc gVMAT plans, utilizing 180 beams with 2° angular resolution, were generated for a glioblastoma multiforme (GBM), lung (LNG), and 2 head and neck cases—one with 3 PTVs (H&N3PTV) and one with 4 PTVs (H&N4PTV). The plans were compared against the clinical VMAT (cVMAT) plans utilizing two overlapping coplanar arcs. Results: The optimization of the gVMAT plans had converged within 600 iterations. gVMAT reduced the average max and mean OAR dose by 6.59% and 7.45% of the prescription dose. Reductions in max dose and mean dose were as high as 14.5 Gy in the LNG case and 15.3 Gy in the H&N3PTV case. PTV coverages (D95, D98, D99) were within 0.25% of the prescription dose. By globally considering all beams, the gVMAT optimizer allowed some beams to deliver higher intensities, yielding a dose distribution that resembles a static beam IMRT plan with beam orientation optimization. Conclusions: The novel VMAT approach allows for the search of an optimal plan in the global solution space and generates deliverable apertures directly. The single arc VMAT approach fully utilizes the digital linacs’ capability in dose rate and gantry rotation speed modulation. Varian Medical Systems, NIH grant R01CA188300, NIH grant R43CA183390.

60 APPLIED LIFE SCIENCES↗

Thermomechanics of Deformations in an Anharmonic Solid Body

The macroscopic laws determining the temperature and deformations of an anharmonic solid body in a given external temperature force field have been stated in the form of the first thermodynamics law supplemented by equations of state of the body. The internal and free energies necessary for it are found from the statistical sum in which some of degrees of freedom determining the body shape are discharged from statistical averaging. These functions of state have been calculated up to the first order of the perturbation theory in the anharmonicity for the microscopic dynamic model of the body with the interatomic interaction potential energy given as a series in powers of atom coordinates. The classical region of high temperatures is considered.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Final Report of the Project "From the finite element method to the virtual element method"

The Finite Element Method (FEM) is a powerful numerical tool that is being used in a large number of engineering applications. The FEM is constructed on triangular/tetrahedral and quadrilateral/hexahedral meshes. Extending the FEM to general polygonal/polyhedral meshes in straightforward way turns out to be extremely difficult and leads to very complex and computationally expensive schemes. The reason for this failure is that the construction of the basis functions on elements with a very general shape is a non-trivial and complex task. In this project we developed a new family of numerical methods, dubbed the Virtual Element Method (VEM) for the numerical approximation of partial differential equations (PDE) of elliptic type suitable to polygonal and polyhedral unstructured meshes. We successfully formulated, implemented and tested these methods and studied both theoretically and numerically their stability, robustness and accuracy for diffusion problems, convection-reaction-diffusion problems, the Stokes equations and the biharmonic equations.

97 MATHEMATICS AND COMPUTING↗

Experimentally Determined Anisotropic Yield Surfaces for Al 7079

Isotropic von Mises and anisotropic Hill yield surfaces for Al 7079 were fit using experimental data gathered from 12 dog-bone specimens that captured the highly variable microstructural texture of the aluminum alloy. Strain gauges or the digital image correlation technique were utilized to determine the strain histories in the specimen as they were subjected to uniaxial tension. The final yield surface fits displayed a high degree of variability that was dependent upon how the yield functions were calculated, i.e. which size and shape information was used. The findings display that a model with a higher number of anisotropic parameters is needed to better and more consistently capture the anisotropic properties of Al 7079, such as the Barlat, Yld2004-18, model that has 20 parameters.

36 MATERIALS SCIENCE↗

Three-Flavor Neutrino Oscillations with MINOS+

This dissertation presents the analysis of the last two years of data from the MINOS+ long-baseline neutrino oscillation experiment. The analysis explores the data above the first oscillation maximum for neutrinos in the standard three-flavor neutrino oscillation model, adding significantly more neutrino events and constraining the model with increased precision. The analysis of the high-energy region of the MINOS+ data set, where previously there has been limited study, can help constrain alternative models or possibly show evidence of new phenomena. The predecessor to MINOS+, the MINOS experiment, measured $\nu_\mu$ disappearance and $\nu_{e}$ appearance using Fermilab's NuMI $\nu_\mu$ beam from 2005 to 2012. During this period the neutrino beam's energy spectrum was focused to peak near the first oscillation maximum. In addition to measuring accelerator beam neutrinos, the MINOS Far Detector collected a sample of atmospheric neutrinos from 2003 to 2011. With the se two samples, MINOS measured the atmospheric mass splitting, $\Delta{m}^2_{32}$, at the 5\% level and the value of $\sin^2\theta_{23}$ at the 15\% level. The data also constrained the CP violating parameter $\delta_{\rm CP}$. The MINOS+ experiment exposed the MINOS detectors to a neutrino beam peaked at energies above the oscillation maximum from 2013 to 2016. With this higher energy neutrino beam, MINOS+ measures the shape of the $\nu_\mu$ survival probability away from the oscillation maximum with unprecedented precision. Measuring the shape of the oscillation probability as a function of neutrino energy is an essential test of the three-flavor oscillation model. At these higher energies where the standard oscillation probability decreases, the neutrino energy spectrum is sensitive to potential perturbations from mixing with additional sterile neutrinos or non-standard neutrino interactions. This analysis of the complete data set from MINOS+ finds no significant deviatio ns from the three-flavor oscillation probability in the ener! gy region of 4 to 10\,GeV covered by the neutrino beam. This provides increased confidence in the three-flavor model in this region and provides new constraints of the atmospheric oscillation parameters, $\Delta{m}^2_{32}$ and $\sin^2\theta_{23}$, by combining the MINOS and MINOS+ data sets. The hierarchy of the neutrino masses is related to the sign of $\Delta{m}^2_{32}$. When $\Delta{m}^2_{32} > 0$, the mass hierarchy is classified as normal. When $\Delta{m}^2_{32} < 0$, the mass hierarchy is classified as inverted. This analysis cannot rule out either of the mass hierarchies. For the normal mass hierarchy, the combined analysis measures $\lvert{\Delta{m}^2_{32}}\rvert = 2.41\pm 0.09 \times 10^{-3}\,{\mathrm{eV}^2}$ at 68\% C.L. and $\sin^2\theta_{23} = 0.42_{-0.06}^{+0.23}$ at 90\% C.L. For the inverted mass hierarchy, this analysis measures $\lvert{\Delta{m}^2_{32}}\rvert = 2.47_{-0.10}^{+0.08} \times 10^{-3}\,{\mathrm{eV}^2}$ at 68\% C.L. and $\sin^2\theta_{23} = 0.42_{ -0.06}^{+0.23}$ at 90\% C.L. In addition to the analysis and measurement of the atmospheric oscillation parameters using MINOS+, this work updates the constraint on $\delta_{\rm CP}$ from MINOS and performs an exploratory combination using $\nu_\mu$ disappearance data from the NOvA experiment. The NOvA experiment uses the NuMI beam in an off-axis strategy that results in a narrow flux of muon neutrinos at the first oscillation maximum and allows precision measurements of the three-flavor parameters. Since NOvA and MINOS+ shared the same neutrino beam, their data can be combined taking advantage of common beam related uncertainties. Combined, the data from the MINOS, MINOS+, and NOvA experiments precisely map $\nu_\mu$ oscillation probabilities using the same neutrino beam in a way that could not be attempted before.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Tank 49H solids disturbance analysis

Tank 49H serves as the feed tank for the Salt Waste Processing Facility (SWPF). Transfers into Tank 49H may disturb any solids that have settled to the bottom of the tank, resulting in feed that may exceed the insoluble solids content limit of 1,200 mg/L of the SWPF Waste Acceptance Criteria (WAC). During a transfer into Tank 49H, material that free falls into Tank 49H through a downcomer could potentially disturb any solids on the bottom of the tank and scour or suspend solids from a settled solids layer or turbid region. A previous analysis and report evaluated the potential to disturb solids when transferring into Tank 49H through the B4 riser and recommended a minimum tank level of 120 inches to prevent disturbing any solids in the bottom of the tank. The scope of this task is to perform additional fluid flow analysis to determine whether accounting for disturbed particle settling and particle mixing and dispersion during transfer could allow the minimum liquid level to be reduced below 120 inches. The analysis utilized models from the technical literature to calculate the size and shape of the “plunging jet” as a function of input parameters such as initial velocity, initial jet diameter, elevation of the initial jet, liquid level in the tank, and solids depth. The analysis relied on the M-Star® simulations performed for the previous analysis to provide bounding estimates of the amount of solid particles disturbed and used the MStar® software to calculate the dispersion and mixing of the disturbed solids with other liquid in the tank as the solids are transported to the transfer pump. The analysis showed that with a solid particle size of 5 micron or less, a liquid level of 120 inches should be maintained to prevent significant disturbance of the solid layer at the bottom of Tank 49H.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Fission Product Evaluation (Quarterly Report)

The LLNL team has developed a theoretical framework to compute the fission fragment charge and mass distributions of odd-mass nuclei, which can be formed in neutron-induced reactions on even-even nuclei. For example, n+ 238 U leads to the compound nucleus 239 U which has 147 neutrons. Odd-mass and odd-odd nuclei are spin-polarized: the spin of the nucleus is not equal to 0 as in even-even nuclei (a consequence of pairing correlations) but is in fact set by a single particle. In practice, that single particle can occupy different quantum-mechanical configurations, each with different spin. This affects the deformation properties of the nucleus and, as a result, the distribution of fission fragments. These distributions require two inputs for the calculation: a potential energy surface (= the total energy of the nucleus as a function of the deformation of the nuclear shape, often parametrized with 2 degrees of freedom) and the collective inertia tensor associated with each point of the PES. In an odd-mass or odd-odd nucleus, each quantity depends on the configuration of the single particle. We computed of the order of 20 to 30 different such configurations to extract the PES for spins K=1/2, 3/2, 5/2, 7/2, and 9/2 of 239 U. We then computed the primary yields for each such PES, as shown in Fig. 1 below. These yields were weighed with the spin distribution associated with the reaction 238 U+n and the resulting distribution used as input to FREYA to compute the independent yields shown in Fig. 2. These yields are then used as inputs to the FIER code to extract the cumulative yields and compare with LLNL-LANL measurements at TUNL.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

3He Neutron Detector Pressure Effect and Comparison to Models

Reported here are the results of measurements performed to determine the efficiency of 3He filled proportional counters as a function of gas pressure in the SAIC system. Motivation for these measurements was largely to validate the current model of the SAIC system. Those predictions indicated that the neutron detection efficiency plotted as a function of pressure has a simple, logarithmic shape. As for absolute performance, the model results indicated the 3He pressure in the current SAIC system could not be reduced appreciably while meeting the current required level of detection sensitivity. Thus, saving 3He by reducing its pressure was predicted not to be a viable option in the current SAIC system.

3He↗

Lattice QCD calculations of nucleon transverse momentum-dependent parton distributions using clover and domain wall fermions

Here, we present a lattice QCD calculation of transverse momentum dependent parton distribution functions (TMDs) of protons using staple-shaped Wilson lines. For time-reversal odd observables, we calculate the generalized Sivers and Boer-Mulders transverse momentum shifts in SIDIS and DY cases, and for T-even observables we calculate the transversity related to the tensor charge and the generalized worm-gear shift. The calculation is done on two different n f = 2+1 ensembles: domain-wall fermion (DWF) with lattice spacing 0:084fm and pion mass of 297 MeV, and clover fermion with lattice spacing 0:114 fm and pion mass of 317 MeV. The results from those two different discretizations are consistent with each other.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Total kinetic energy release in the fast neutron induced fission of actinide nuclei

The total kinetic energy release and fission mass distributions for the fast neutron (En = 3–100 MeV) induced fission of 232 Th, 233 U, 235 U, 237 Np, 239 Pu, 240 Pu, and 242 Pu have been measured using the LANSCE facility. The neutron energies were deduced from time-of- flight measurements. The fission fragments were detected using Si PIN diode detectors, giving us the fragment energies. The actinide targets were made by vapor deposition leading to high-quality targets, that were thin and uniform with reduced impurities. Corrections were made to the data for pulse height defect and the fragment energy loss in the target and its backing. The TKE distributions were Gaussian in shape and their mean value as a function of incoming neutron energy could be fitted with second order polynomials. In the case of 233 U and 235 U, our measurements agree with prior work. Our measurements for 232 Th are unique. Our data agree with Viola scaling. The constant position of the heavy mass peak is interpreted as being due to the influence of the N = 88 and Z = 50 shells. The GEF model predictions agree with the data in general as do the CGMF model predictions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Experimental evaluation of the aerodynamic damping of skin panels at low supersonic Mach numbers.

The aerodynamic damping of the first three vibration modes of a rectangular panel exposed to an attached turbulent boundary layer has been measured over the Mach number range of 1.10 to 1.40. Data showing that aerodynamic damping is a strong function of Mach number, dynamic pressure, mode shape, and boundary layer thickness are presented. At low supersonic Mach numbers, aerodynamic damping was found to be 20 to 100 times as large as common values of structural damping. Means of calculating aerodynamic damping, including effects of the boundary layer profile, are discussed. Calculated aerodynamic damping is compared with experimental data.

Muhlstein, L., Jr.↗

Line shape parameters for HCl and HF in a CO2 atmosphere.

Results of high-resolution (0.1 cm/cm) on several CO2-broadened lines in the fundamentals of HCl35 and HCl37. Line intensities, half-widths, and shapes were determined at room temperature. Half-widths in HCl-CO2 collisions were computed for several temperatures, employing Anderson's (1949) theory. The measured shapes of HCl lines broadened by CO2 are described by a semiempirical super-Lorentzian shape. The curve-of-growth for this line shape is derived in terms of a function similar to the Ladenburgh-Reiche function. Absorption between R(0) and P(1) is affected by the appearance of several pressure-induced Q-branch lines, at the pressures from 1 to 10 atm used in the present study.

Varanasi, P.↗

Steady subsonic flow around finite-thickness wings

The general method for analyzing steady subsonic potential aerodynamic flow around a lifting body having arbitrary shape is presented. By using the Green function method, an integral representation for the potential is obtained. Under small perturbation assumption, the potential at any point, P, in the field depends only upon the values of the potential and its normal derivative on the surface of the body. Hence if the point P approaches the surface of the body, the representation reduces to an integral equation relating the potential and its normal derivative (which is known from the boundary conditions) on the surface. The question of uniqueness is examined and it is shown that, for thin wings, the operator becomes singular as the thickness approaches zero. This fact may yield numerical problems for very thin wings. However, numerical results obtained for a rectangular wing in subsonic flow show that these problems do not appear even for thickness ratio tau = .001. Comparison with existing results shows that the proposed method is at least as fast and accurate as the lifting surface theories.

Kuo, C. C.↗

Silicon vidicon imaging of Jupiter - 4100- to 8300-A absolute reflectivities and limb darkening of spatially resolved regions

Jupiter was observed in six continuum wavelength channels in the region 4100-8300 A, using a silicon vidicon imaging photometer. Spectral reflectivities and high spatial resolution limb-darkening curves for several belts and zones have been extracted from the data. Simple model fits to the data yield information regarding spectral and spatial variations in single-scattering albedos and shape of particle single-scattering phase functions. Belts appear to be more backscattering than zones, particularly in the blue. The data are in moderate agreement with limb-darkening predicted by models derived from the center-to-limb variation in equivalent width of the H2 4-0 S(1) quadrupole line (Cochran, 1976) in the South Tropical Zone, but strongly disagree with the results of such models for the North Equatorial Belt.

Diner, D. J.↗