Search NASA⌕ Search

SEARCH · Search NASA

Results for “transitional”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96

Transition Region Contribution to AIA Observations in the Context of Coronal Heating

We investigate the ratio of coronal and transition region intensity in coronal loops observed by the AtmosphericImaging Assembly(AIA)on the Solar Dynamics Observatory(SDO). Using Enthalpy-based Thermal Evolution ofLoops(EBTEL)hydrodynamic simulations, we model loops with multiple lengths and energyfluxes heatedrandomly by events drawn from power-law distributions with different slopes and minimum delays between eventsto investigate how each of these parameters influences observable loop properties. We generate AIA intensitiesfrom the corona and transition region for each realization. The variations within and between models generatedwith these different parameters illustrate the sensitivity of narrowband imaging to the details of coronal heating.We then analyze the transition region and coronal emission from a number of observed active regions andfindbroad agreement with the trends in the models. In both models and observations, the transition region brightness issignificant, often greater than the coronal brightness in all six“coronal”AIA channels. We also identify an inverserelationship, consistent with heating theories, between the slope of the differential emission measure(DEM)coolward of the peak temperature and the observed ratio of coronal to transition region intensity. These resultshighlight the use of narrowband observations and the importance of properly considering the transition region ininvestigations of coronal heating

S J Schonfeld↗

Computational Study of Low-Speed Boundary-Layer Laminar-Turbulent Transition over a 30º Swept Plate in a Channel

Reliable boundary-layer laminar-turbulent transition predictions are critical for the design of aircraft that use natural or controlled laminar flow to achieve low drag and better fuel efficiency. During cruise flight through low turbulence, the three-dimensional boundary layer over swept surfaces can transition prematurely due to stationary crossflow instabilities induced by surface roughness. Parabolized stability equations analyses have been successfully used to explain the different phases of the transition process under well controlled perturbations such as steps or discrete roughness elements. However, methodologies are still lacking to model the boundary layer receptivity to distributed random roughness, and the following non-linear instability stages leading to transition. For engineering applications, several semi-empirical methods based on linear amplification factors or local helicity have found growing adoption, but their reliability is limited by their level of simplification and the sparsity of data they are based on. To address this gap, a new study of the effect of distributed random surface roughness on crossflow transition was started, using a 30◦ swept plate as a test vehicle. The plate, which is mounted in the 2 Foot × 3 Foot Low-Speed Boundary-Layer Channel at the NASA Langley Research Center, has been tested with micro-scale roughness of varied geometry near the leading edge. In order to analyze the flow in the test section and prepare Direct Numerical Simulations with resolved roughness, Reynolds-Averaged Navier-Stokes (RANS) simulations of the flow over the plate installed in the wind tunnel test section were performed using the Langtry-Menter transition model with stationary crossflow extension. This paper presents the results of these simulations, with comparison to the experiment.

ARMD↗

Transition Aero-Propulsive Analysis of a Tilt-Wing eVTOL Aircraft Using a Surface-Vorticity Solver

This work uses FlightStream, a surface-vorticity solver, to perform an aero-propulsive analysis on the NASA LA-8 aircraft through the transition flight regime. Aerodynamic force and moment coefficient predictions for forward and transition flight of the airframe without propulsors are compared with wind tunnel data. Powered transition cases are simulated using Conway actuator disks to model the propellers and results are compared with response surface equations derived from wind tunnel data. The approach described in the paper provides mid-fidelity solutions at a reduced computational cost compared to volumetric CFD, which allows for rapid transition flight analyses and optimization in the early design stages. The best prediction results were observed in forward flight and high-speed transition. Mid-transition results were not as close in magnitude but the trends exhibited reasonable agreement with experimental data.

Advanced Air Mobility↗

Spectroscopic Study of the Effects of Pressure Media on High-Pressure Phase Transitions in Natrolite

Structural phase transitions in natrolite have been investigated as a function of pressure and different hydrostatic media using micro-Raman scattering and synchrotron infrared (IR) spectroscopy. Natrolite undergoes two reversible phase transitions at 0.86 and 1.53 GPa under pure water pressure medium. These phase transitions are characterized by the changes in the vibrational frequencies of four- and eight-membered rings related to the variations in the bridging T-O-T angles and the geometry of the elliptical eight-ring channels under pressure. Concomitant to the changes in the framework vibrational modes, the number of the O-H stretching vibrational modes of natrolite changes as a result of the rearrangements of the hydrogen bonds in the channels caused by a successive increase in the hydration level under hydrostatic pressure. Similar phase transitions were also observed at relatively higher pressures (1.13 and 1.59 GPa) under alcohol-water pressure medium. Furthermore, no phase transition was found up to 2.52 GPa if a lower volume ratio of the alcohol-water to natrolite was employed. This indicates that the water content in the pressure media plays a crucial role in triggering the pressure-induced phase transitions in natrolite. In addition, the average of the mode Grueneisen parameters is calculated to be about 0.6, while the thermodynamic Grueneisen parameter is found to be 1.33. This might be attributed to the contrast in the rigidity between the TO{sub 4} tetrahedral primary building units and other flexible secondary building units in the natrolite framework upon compression and subsequent water insertion.

08 HYDROGEN↗

Obseration of flow regime transition in CFB riser using an LDV

The solids flow in a circulating fluidized bed (CFB) riser is often described to have a core-annular structure. For a given superficial gas velocity, at the initial introduction of solids into a riser a flow structure of dilute upflow regime exists. Continuing to increase the solids flow in the riser transitions the flow structure to the core-annular flow regime. However, with further increase of solids flow a condition is reached, depending on the superficial gas velocity, where all the solids across the riser cross section flow upwards, even those at the wall. When the solids flux, solids fraction and gas velocity are relatively high, such a condition is described as the dense phase suspense upflow (DSU) regime. In this paper we report our observations of these flow regime transitions by using a laser Doppler velocimeter (LDV) to monitor the upward and downward particle flow velocities at and near the riser wall of the National Energy Technology Laboratory’s 30.4 centimeters diameter CFB cold flow model. The particles were high density polyethylene (PPE) spheres with a Sauter mean diameter of 861 micron and a density of 800 kg/m3. Three superficial gas velocities of 6.55 m/s, 10.67 m/s and 13.72 m/s were used in this study. For the case of superficial gas velocity 6.55 m/s, the experimental data show that the transition from dilute upflow to core-annular flow occurred when the solids flux was about 7 kg/m{sup 2}-s and the transition from core-annular flow to dense suspension upflow was about 147 kg/m{sup 2}-s. As the superficial gas velocity was increased to 10.67 m/s the corresponding flow regime transitions were at 34 kg/m{sup 2}-s and 205 kg/m{sup 2}-s, respectively. For the case of superficial gas velocity of 13.72 m/s the data showed no distinct transition of flow regimes. The particles were all upflow for the range of solids fluxes from 10 kg/m{sup 2}-s to 286 kg/m{sup 2}-s.

42 ENGINEERING↗

Convolution seal for transition duct in turbine system

A turbine system is disclosed. In one embodiment, the turbine system includes a transition duct. The transition duct includes an inlet, an outlet, and a passage extending between the inlet and the outlet and defining a longitudinal axis, a radial axis, and a tangential axis. The outlet of the transition duct is offset from the inlet along the longitudinal axis and the tangential axis. The transition duct further includes an interface feature for interfacing with an adjacent transition duct. The turbine system further includes a convolution seal contacting the interface feature to provide a seal between the interface feature and the adjacent transition duct.

33 ADVANCED PROPULSION SYSTEMS↗

Converging flow joint insert system at an intersection between adjacent transitions extending between a combustor and a turbine assembly in a gas turbine engine

A transition duct system (100) for routing a gas flow from a combustor (102) to the first stage (104) of a turbine section (106) in a combustion turbine engine (108), wherein the transition duct system (100) includes one or more converging flow joint inserts (120) forming a trailing edge (122) at an intersection (124) between adjacent transition ducts (126, 128) is disclosed. The transition duct system (100) may include a transition duct (126, 128) having an internal passage (130) extending between an inlet (132, 184) to an outlet (134, 186) and may expel gases into the first stage turbine (104) with a tangential component. The converging flow joint insert (120) may be contained within a converging flow joint insert receiver (136) and disconnected from the transition duct bodies (126, 128) by which the converging flow joint insert (120) is positioned. Being disconnected eliminates stress formation within the converging flow joint insert (120), thereby enhancing the life of the insert. The converging flow joint insert (120) may be removable such that the insert (120) can be replaced once worn beyond design limits.

42 ENGINEERING↗

Selective, adsorbate-induced spin state changes in transition metal-based metal-organic frameworks

An adsorbate-selective metal organic framework includes a transition metal; and a plurality of organic molecules coordinated to the transition metal so as to preserve open coordination sites for selectively adsorbing molecules that have low-lying π* orbitals. The transition metal has a lowest energy spin state in the presence of the selectively adsorbed molecules that are strongly bonding to the transition metal through π-donating interactions which is different than the lowest energy spin state in the absence of these adsorbed molecules. The transition metal has also a lowest energy spin state in the presence of non-selected molecules that are weakly bonding to the transition metal through σ- and/or π-accepting and/or donating interactions.

Long, Jeffrey R.↗

Bi-chromatic probing of the metal-insulator transition in VO2 thin film

VO2 is a correlated electron material that exhibits a metal-insulator (MIT) phase transition that can be thermally, electrically, or optically controlled. For the thermally-induced case the material undergoes a structural transition from a monoclinic insulating state to rutile metal at around 340K. The salient features of this first order phase transition are that upon the transition the material exhibits up to five orders-of-magnitude increase in conductivity and consequently also significant changes in the optical properties. Typically in these oxides, competing states can often coexist and form nano- or microscale domains of different phases while transitioning. Here we show that upon thermally inducing the MIT on epitaxial VO2 films when simultaneously probed by two very different frequencies- namely IR and THz- the onset of the MIT appears at somewhat different temperature depending on the light used to probe it, thus confirming the coexistence of nano-scale domains of different phases. We will show our correlated far field optical and transport studies on these films to investigate the percolative nature of the transition and applied mean field approximations to model the observed response.

Wang, Lei↗

Impacts of Recycling Time on Fuel Cycle Transition

The purpose of this work is to show the importance of assumptions regarding the recycling time for time-dependent fuel cycle scenarios that involve transition from the current state of the U.S. fuel cycle to cycles based on continuous recycling via fast reactors. The recycling time is defined here as the total time between when the fuel is discharged from the reactor core and when its recovered heavy metals (HM) are recycled back into the core as part of the fresh/new fuel. The main processes occurring within the recycling time include cooling, separations, and fuel fabrication. The minimum recycling time required for fast reactor fuel largely depends on the minimum cooling time, which will be longer if discharged fuel needs to be moved to a centrally-located separations facility. A longer cooling time is needed for the heat load and fuel characteristics to reach safer levels for handling and transportation. Therefore, if the separation and fabrication facilities were co-located with reactors on-site, then the total recycling time could be reduced by several years. For fuel cycle transition scenarios in which external fissile materials (Pu or TRU) are limiting, these longer recycling times may prolong the transition to the continuous recycling system of fast reactors as well as impact the fuel cycle system performance during the transition. Therefore, in order to demonstrate the quantitative impacts of these recycling time assumptions, an example scenario of transition to the fast reactor fleet with continuous recycle was modeled in the fuel cycle systems code DYMOND. It must be emphasized that this is a point study that demonstrates how a longer recycling time can impact the rate of transition under specific conditions and assumptions. For alternative scenarios, such as those in which there are no fissile material constraints, there are likely no significant impacts due to recycling time. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Transition core modeling for extended enrichment, accident tolerant fuel using PARCS/Polaris

Current plans and efforts from reactor operators and vendors to include extended enrichment (EE) and accident-tolerant fuel (ATF) in current reactor fleets motivate the study of these changes in reactor physics analysis. This work uses the US Nuclear Regulatory Commission core simulator PARCS to do the core calculation and SCALE Polaris lattice physics code to generate the required homogenized, few-group constants. The lattice model used is based on the GE-14 10x10 assemblies with UO{sub 2} fuels. Both nominal core and transition core are studied in this work, and both cores use GE-14 10x10 assemblies with UO{sub 2} fuel. The nominal core uses regular UO{sub 2} fuel with a maximum enrichment of 5 wt % and ZIRC-2 cladding. The ATF transition core uses FeCrAl cladding and regular UO{sub 2} fuel, while the EE-ATF transition core uses FeCrAl cladding with UO{sub 2} fuel with 8 max wt % enrichment. The accuracy presented in the colorset models verified the capability of the PARCS/Polaris procedures for the transition core analysis. For the whole core calculation, the ATF and EE-ATF transition core models were made in addition to the nominal core model. The core parameters to study are the core power distribution and power peaking factor, doppler temperature coefficients, and control rod worth at cold zero power and hot full power. Comparing the core parameters of the transition cores with the nominal core in PARCS, the results suggest that there is no unexpected outcome for the implementation of ATF and EE fuels. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Theory of quantum metal to superconductor transitions in highly conducting systems

We derive the theory of the quantum (zero temperature) superconductor to metal transition in disordered materials when the resistance of the normal metal near criticality is small compared to the quantum of resistivity. This can occur most readily in situations in which 'Anderson's theorem' does not apply. We explicitly study the transition in superconductor-metal composites, in an swave superconducting film in the presence of a magnetic field, and in a low temperature disordered d-wave superconductor. Near the point of the transition, the distribution of the superconducting order parameter is highly inhomogeneous. To describe this situation we employ a procedure which is similar to that introduced by Mott for description of the temperature dependence of the variable range hopping conduction. As the system approaches the point of the transition from the metal to the superconductor, the conductivity of the system diverges, and the Wiedemann-Franz law is violated. In the case of d-wave (or other exotic) superconductors we predict the existence of (at least) two sequential transitions as a function of increasing disorder: a d-wave to s-wave, and then an s-wave to metal transition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spectroscopic Studies on the Metal-Insulator Transition Mechanism in Correlated Materials

Here, the metal–insulator transition (MIT) in correlated materials is a novel phenomenon that accompanies a large change in resistivity, often many orders of magnitude. It is important in its own right but its switching behavior in resistivity can be useful for device applications. From the material physics point of view, the starting point of the research on the MIT should be to understand the microscopic mechanism. Here, an overview of recent efforts to unravel the microscopic mechanisms for various types of MITs in correlated materials is provided. Research has focused on transition metal oxides (TMOs), but transition metal chalcogenides have also been studied. Along the way, a new class of MIT materials is discovered, the so–called relativistic Mott insulators in 5d TMOs. Distortions in the MO 6 (M = transition metal) octahedron are found to have a large and peculiar effect on the band structure in an orbital dependent way, possibly paving a way to the orbital selective Mott transition. In the final section, the character of the materials suitable for applications is summarized, followed by a brief discussion of some of the efforts to control MITs in correlated materials, including a dynamical approach using light.

36 MATERIALS SCIENCE↗

Structural Phase Transitions between Layered Indium Selenide for Integrated Photonic Memory

The primary mechanism of optical memoristive devices relies on phase transitions between amorphous and crystalline states. The slow or energy-hungry amorphous–crystalline transitions in optical phase-change materials are detrimental to the scalability and performance of devices. Leveraging an integrated photonic platform, nonvolatile and reversible switching between two layered structures of indium selenide (In 2 Se 3 ) triggered by a single nanosecond pulse is demonstrated. The high-resolution pair distribution function reveals the detailed atomistic transition pathways between the layered structures. With interlayer “shear glide” and isosymmetric phase transition, switching between the α- and β-structural states contains low re-configurational entropy, allowing reversible switching between layered structures. Broadband refractive index contrast, optical transparency, and volumetric effect in the crystalline–crystalline phase transition are experimentally characterized in molecular-beam-epitaxy-grown thin films and compared to ab initio calculations. Finally, the nonlinear resonator transmission spectra measure of incremental linear loss rate of 3.3 GHz, introduced by a 1.5 µm-long In 2 Se 3 -covered layer, resulted from the combinations of material absorption and scattering.

36 MATERIALS SCIENCE↗

Phase Transition of Heptane under Pressure

A solid-to-solid phase transition was discovered in n-heptane with an onset at a pressure of 1.7 ± 0.1 GPa, evidenced by a discontinuity in the pressure–volume equation of state obtained from synchrotron X-ray diffraction experiments conducted at room temperature. The phase transition also resulted in discontinuous shifts of vibrational peaks in the infrared spectra. No additional phase transitions were detected up to 10 GPa, contradicting an earlier claim of a phase transition at 3 GPa. Furthermore, the hydrostatic limit of heptane in a diamond anvil cell was estimated to be 3.5 GPa. Above that pressure, the stress state is not well-defined, which may explain prior reports of a phase transition at 7.5 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-Row Transition Metal Antimonates for the Oxygen Reduction Reaction

The development of inexpensive and abundant catalysts with high activity, selectivity, and stability for the oxygen reduction reaction (ORR) is imperative for the widespread implementation of fuel cell devices. Herein, we present a combined theoretical–experimental approach to discover and design first-row transition metal antimonates as excellent electrocatalytic materials for the ORR. Theoretically, we identify first-row transition metal antimonates–MSb 2 O 6 , where M = Mn, Fe, Co, and Ni–as nonprecious metal catalysts with good oxygen binding energetics, conductivity, thermodynamic phase stability, and aqueous stability. Among the considered antimonates, MnSb 2 O 6 shows the highest theoretical ORR activity based on the 4e – ORR kinetic volcano. Experimentally, nanoparticulate transition metal antimonate catalysts are found to have a minimum of a 2.5-fold enhancement in intrinsic mass activity (on transition metal mass basis) relative to the corresponding transition metal oxide at 0.7 V vs RHE in 0.1 M KOH. MnSb 2 O 6 is the most active catalyst under these conditions, with a 3.5-fold enhancement on a per Mn mass activity basis and 25-fold enhancement on a surface area basis over its antimony-free counterpart. Electrocatalytic and material stability are demonstrated over a 5 h chronopotentiometry experiment in the stability window identified by theoretical Pourbaix analysis. Furthermore, this study further highlights the stable and electrically conductive antimonate structure as a framework to tune the activity and selectivity of nonprecious metal oxide active sites for ORR catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Radiative transitions of excited ions moving slowly in plasmas

The electric dipole transitions of excited ions moving slowly in plasmas are studied. The results show that some transitions forbidden for excited ions at rest become allowed for moving excited ions. The transition rates change with varying speed of the ions. Forbidden transitions are strongly influenced by the speed, non-forbidden transitions are weakly influenced.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diffusive dynamics during the high-to-low density transition in amorphous ice

Water exists in high- and low-density amorphous ice forms (HDA and LDA), which could correspond to the glassy states of high- (HDL) and low-density liquid (LDL) in the metastable part of the phase diagram. However, the nature of both the glass transition and the high-to-low-density transition are debated and new experimental evidence is needed. Here we combine wide-angle X-ray scattering (WAXS) with X-ray photon-correlation spectroscopy (XPCS) in the small-angle X-ray scattering (SAXS) geometry to probe both the structural and dynamical properties during the high-to-low-density transition in amorphous ice at 1 bar. By analyzing the structure factor and the radial distribution function, the coexistence of two structurally distinct domains is observed at T = 125 K. XPCS probes the dynamics in momentum space, which in the SAXS geometry reflects structural relaxation on the nanometer length scale. The dynamics of HDA are characterized by a slow component with a large time constant, arising from viscoelastic relaxation and stress release from nanometer-sized heterogeneities. Above 110 K a faster, strongly temperature-dependent component appears, with momentum transfer dependence pointing toward nanoscale diffusion. This dynamical component slows down after transition into the low-density form at 130 K, but remains diffusive. In conclusion, the diffusive character of both the high- and low-density forms is discussed among different interpretations and the results are most consistent with the hypothesis of a liquid–liquid transition in the ultraviscous regime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗