Search NASA⌕ Search

SEARCH · Search NASA

Results for “ASSESSMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Short-Run Marginal Emission Factors Neglect Impactful Phenomena and are Unsuitable for Assessing the Power Sector Emissions Impacts of Hydrogen Electrolysis

This comment reacts to Ruhnau and Schiele's (2023) assessment of the cost and emissions impacts of electrolytic hydrogen production operating under different green hydrogen certification requirements in the EU. We critique the paper's use of short-run marginal emissions rates to estimate emissions impacts, a methodology which the literature has shown to be inadequate for assessing the full lifecycle emissions impacts of electricity sector interventions. We hope that our response clarifies the need to consider induced structural change when assessing the greenhouse gas emissions impacts of electricity sector decisions at all scales.

electricity↗

A proposal for assessing study quality: Biomonitoring, Environmental Epidemiology, and Short-lived Chemicals (BEES-C) instrument

The quality of exposure assessment is a major determinant of the overall quality of any environmental epidemiology study. The use of biomonitoring as a tool for assessing exposure to ubiquitous chemicals with short physiologic half-lives began relatively recently. These chemicals present several challenges, including their presence in analytical laboratories and sampling equipment, difficulty in establishing temporal order in cross-sectional studies, short- and longterm variability in exposures and biomarker concentrations, and a paucity of information on the number of measurements required for proper exposure classification. To date, the scientific community has not developed a set of systematic guidelines for designing, implementing and interpreting studies of short-lived chemicals that use biomonitoring as the exposure metric or for evaluating the quality of this type of research for WOE assessments or for peer review of grants or publications. We describe key issues that affect epidemiology studies using biomonitoring data on short-lived chemicals and propose a systematic instrument – the Biomonitoring, Environmental Epidemiology, and Short-lived Chemicals (BEES-C) instrument – for evaluating the quality of research proposals and studies that incorporate biomonitoring data on short-lived chemicals. Quality criteria for three areas considered fundamental to the evaluation of epidemiology studies that include biological measurements of short-lived chemicals are described: 1) biomarker selection and measurement, 2) study design and execution, and 3) general epidemiological study design considerations. We recognize that the development of an evaluative tool such as BEES-C is neither simple nor non-controversial. We hope and anticipate that the instrument will initiate further discussion/debate on this topic.

54 ENVIRONMENTAL SCIENCES↗

Intra-urban variability of air pollution in Windsor, Ontario-Measurement and modeling for human exposure assessment

There are acknowledged difficulties in epidemiological studies to accurately assign exposure to air pollution for large populations, and large, long-term cohort studies have typically relied upon data from central monitoring stations. This approach has generally been adequate when populations span large areas or diverse cities. However, when the effects of intra-urban differences in exposure are being studied, the use of these existing central sites are likely to be inadequate for representing spatial variability that exists within an urban area. As part of the Border Air Quality Strategy (BAQS), an international agreement between the governments of Canada and the United States, a number of air health effects studies are being undertaken by Health Canada and the US EPA. Health Canada's research largely focuses on the chronic exposure of elementary school children to air pollution. The exposure characterization for this population to a variety of air pollutants has been assessed using land-use regression (LUR) models. This approach has been applied in several cities to nitrogen dioxide (NO{sub 2}), as an assumed traffic exposure marker. However, the models have largely been developed from limited periods of saturation monitoring data and often only represent one or two seasons. Two key questions from these previous efforts, which are examined in this paper, are: If NO{sub 2} is a traffic marker, what other pollutants, potentially traffic related, might it actually represent? How well is the within city spatial variability of NO{sub 2}, and other traffic-related pollutants, characterized by a single saturation monitoring campaign. Input data for the models developed in this paper were obtained across a network of 54 monitoring sites situated across Windsor, Ontario. The pollutants studied were NO{sub 2}, sulfur dioxide (SO{sub 2}) and volatile organic compounds, which were measured in all four seasons by deploying passive samplers for 2-week periods. Correlations among these pollutants were calculated to assess what other pollutants NO{sub 2} might represent, and correlations across seasons for a given pollutant were determined to assess how much the within-city spatial pattern varies with time. LUR models were then developed for NO{sub 2}, SO{sub 2}, benzene, and toluene. A multiple regression model including proximity to the Ambassador Bridge (the main Canada-US border crossing point), and proximity to highways and major roads, predicted NO{sub 2} concentrations with an R{sup 2}=0.77. The SO{sub 2} model predictors included distance to the Ambassador Bridge, dwelling density within 1500 m, and Detroit-based SO{sub 2} emitters within 3000 m resulting in a model with an R{sup 2}=0.69. Benzene and toluene LUR models included traffic predictors as well as point source emitters resulting in R{sup 2}=0.73 and 0.46, respectively. Between season pollutant correlations were all significant although actual concentrations for each site varied by season. This suggests that if one season were to be selected to represent the annual concentrations for a specific site this may lead to a potential under or overestimation in exposure, which could be significant for health research. All pollutants had strong inter-pollutant correlations suggesting that NO{sub 2} could represent SO{sub 2}, benzene, and toluene.

54 ENVIRONMENTAL SCIENCES↗

An information diffusion technique to assess integrated hazard risks

An integrated risk is a scene in the future associated with some adverse incident caused by multiple hazards. An integrated probability risk is the expected value of disaster. Due to the difficulty of assessing an integrated probability risk with a small sample, weighting methods and copulas are employed to avoid this obstacle. To resolve the problem, in this paper, we develop the information diffusion technique to construct a joint probability distribution and a vulnerability surface. Then, an integrated risk can be directly assessed by using a small sample. A case of an integrated risk caused by flood and earthquake is given to show how the suggested technique is used to assess the integrated risk of annual property loss.

58 GEOSCIENCES↗

Integrating population connectivity into pollution assessment: Overwintering mixing reveals flame retardant contamination in breeding areas in a migratory raptor

Highlights: • This multidisciplinary study integrates population connectivity into pollution assessment. • Flame retardants in inviable eggs of black kites were assessed in two populations. • A much higher occurrence and concentration of flame retardants were found in Madrid than Doñana. • Kites from Western Europe showed a strong winter intermixing in Africa. • Diffuse migratory connectivity reveals breeding areas as the main contamination grounds. Determining the exposure and magnitude at which various pollutants are differentially assimilated at the breeding and non-breeding grounds of migratory wildlife is challenging. Here, the possibility of applying the migratory connectivity framework to understanding contamination in birds is illustrated by considering flame retardants in inviable eggs of a migratory raptor, the black kite (Milvus migrans). The occurrence and concentration of legacy and emerging compounds in eggs from the southeastern peri-urban area of Madrid city, central Spain, were compared with those from Doñana National Park in southern Spain. A much higher occurrence and concentration of multiple polybrominated diphenyl ethers and Dechlorane 602 were found in Madrid than Doñana, but the opposite patterns were found for Dechlorane Plus. Individuals from these and other breeding areas in western Europe showed a strong intermixing pattern over widespread wintering areas in Africa, as assessed by ringing recoveries and movements tracked by satellite devices. This diffuse migratory connectivity reveals breeding areas as the main contamination grounds. High contamination burdens sequestered in eggs point to rapid assimilation of these compounds before laying, associated with important emission sources in Madrid, especially landfills of partially incinerated urban refuse, and other anthropogenic operations. Diet composition regarding aquatic vs. terrestrial prey, and bioaccumulation and biomagnification processes are suggested to explain differential assimilation of some compounds, especially Dechlorane Plus in Doñana, although a local emission source polluting this area cannot be ruled out. Insight from the migratory connectivity framework can help to disentangle large-scale patterns of contaminant uptake and refocus attention on key regions and potential causes of chemical hazards in declining migratory species and human populations.

54 ENVIRONMENTAL SCIENCES↗

Improving the Usability of Integrated Assessment for Adaptation Practice: Insights from the U.S. Southeast Energy Sector

Energy systems comprise a key sector of the U.S. economy, and one that has been identified as potentially vulnerable to the effects of climate variability and change. However, understanding of adaptation processes in energy companies and private entities more broadly is limited. It is unclear, for example, the extent to which energy companies are well-served by existing knowledge and tools emerging from the impacts, adaptation and vulnerability (IAV) and integrated assessment modeling (IAM) communities and/or what experiments, analyses, and model results have practical utility for informing adaptation in the energy sector. As part of a regional IAM development project, we investigated available evidence of adaptation processes in the energy sector, with a particular emphasis on the U.S. Southeast and Gulf Coast region. A mixed methods approach of literature review and semi-structured interviews with key informants from energy utilities was used to compare existing knowledge from the IAV community with that of regional stakeholders. That comparison revealed that much of the IAV literature on the energy sector is climate-centric and therefore disconnected from the more integrated decision-making processes and institutional perspectives of energy utilities. Increasing the relevance of research and assessment for the energy sector will necessitate a greater investment in integrated assessment and modeling efforts that respond to practical decision-making needs as well as greater collaboration between energy utilities and researchers in the design, execution, and communication of those efforts.

de Bremond, Ariane↗

The importance of capturing power system operational details in resource adequacy assessments

Traditional methods for assessing the resource adequacy (RA) of a power system are becoming obsolete due to emerging trends such as the increasing deployment of variable renewable energy and storage. Consequently, analysts are recommending that RA be assessed using a Monte Carlo simulation approach that models chronological power system operations over many instances of possible operating conditions. However, this approach is necessarily more complex and computationally demanding, which is an obstacle to real-world implementation. Here, in this study, we investigate which operational details of power systems are important to capture in order to accurately evaluate a system's RA, versus details that add complexity but do not meaningfully affect RA results. To do so, we develop a probabilistic RA assessment framework by adapting an existing production cost model and apply it to a case study based on the IEEE Reliability Test System. Our results indicate that multi-year data, storage dispatch, and transmission limits are key details to incorporate. Accurate RA results can be obtained using non-economic dispatch strategies as long as they are coordinated with detailed operational strategies. We also demonstrate how popular expectation-based RA metrics can mask important differences in the characteristics of loss of load events.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Impact assessment of geomagnetic induced current neutral blocking devices with power electronics sources on distance relay for 230 kV transmission lines

Electrical grids increased the integration of power electronics sources onto transmission lines. In addition, recent reports show a significant rise in geomagnetic storms occurring in 2024. These geomagnetic storms can affect transmission lines by inducing electrical currents within them, potentially causing power outages due to overloaded power transformers. Geomagnetic induced current neutral blocking devices (GIC-NBDs) are capacitors on the ground of wye power transformers, to avoid damage caused by geomagnetic storms. The integration of distance relays and transmission lines with power electronics sources and GIC-NBDs needs to be studied to observe if GIC-NBDs and power electronics sources could adversely affect operation of the electrical grid. In this analysis, the effect of 2 MW power electronics sources and GIC-NBDs on distance relays is assessed for different 230 kV transmission line lengths in radial and nonradial power systems. The simulations measured the apparent impedances, with different electrical faults. Results for a typical 2,650 μF GIC-NBD application were presented on impedance plots, and the distance relay model operations were assessed. In conclusion, the tests for radial and nonradial power systems showed the behavior of the distance elements and source impedance ratios, assessing the effect of power electronics sources and GIC-NBDs on 230 kV transmission lines.

Distance relays↗

Feasibility study for test rig assessments of fish passage conditions in a Kaplan turbine

The assessment of fish passage conditions in hydroelectric turbines consists of identifying and quantifying physical magnitudes leading to increased risks of injury of fish passing through turbines in operation. Such assessments are usually carried out either with the use of computer-based methods during design or with field testing of live fish and sensors passing through prototypes. A method in between consists of test rig experimentation, which is critical for testing fish-focused design concepts and offers the opportunity for implementing the most effective design measures for improved fish survivability. However, fish-related assessments in test rigs are not sufficiently documented for industrial applications. This work presents the main findings of an experimental campaign to quantify fish-related hydraulic magnitudes in a physical model of a Kaplan turbine in a commercial test rig. Two operating conditions were tested by releasing miniaturized autonomous sensor devices (termed Sensor Fish Mini) at the turbine intake flow, passing them through the runner in motion and recovering them at the draft tube exit. During passage, time series of acceleration, absolute pressure and rotational velocity were recorded. The recordings were then interpreted to determine the magnitude and likely location of hydraulic stressors hazardous to fish. The statistical tests on the reported measurements indicated that low pressure, collisions on the runner and rotations in the draft tube were not different between the two tested operating points. On the other hand, pressure drop and collision rates on the distributor differed considerably as a function of net head. The outcomes of this investigation showed that test rig evaluations of fish-related properties with Sensor Fish Mini can contribute to an evidence-based development of turbine geometries designed for providing safer passage conditions. Future work will investigate the scaling of test rig measurements to hydraulically equivalent magnitudes in the prototype and their biological consequences.

13 HYDRO ENERGY↗

Reduced order models for assessing CO 2 impacts in shallow unconfined aquifers

Risk assessment studies of potential CO 2 sequestration projects consider many factors, including the possibility of brine and/or CO 2 leakage from the storage reservoir. Detailed multiphase reactive transport simulations have been developed to predict the impact of such leaks on shallow groundwater quality; however, these simulations are computationally expensive and thus difficult to directly embed in a probabilistic risk assessment analysis. Here we present a process for developing computationally fast reduced-order models which emulate key features of the more detailed reactive transport simulations. A large ensemble of simulations that take into account uncertainty in aquifer characteristics and CO 2 /brine leakage scenarios were performed. Twelve simulation outputs of interest were used to develop response surfaces (RSs) using a MARS (multivariate adaptive regression splines) algorithm (Milborrow, 2015). A key part of this study is to compare different measures of ROM accuracy. We then show that for some computed outputs, MARS performs very well in matching the simulation data. The capability of the RS to predict simulation outputs for parameter combinations not used in RS development was tested using cross-validation. Again, for some outputs, these results were quite good. For other outputs, however, the method performs relatively poorly. Performance was best for predicting the volume of depressed-pH-plumes, and was relatively poor for predicting organic and trace metal plume volumes. We believe several factors, including the non-linearity of the problem, complexity of the geochemistry, and granularity in the simulation results, contribute to this varied performance. The reduced order models were developed principally to be used in probabilistic performance analysis where a large range of scenarios are considered and ensemble performance is calculated. We demonstrate that they effectively predict the ensemble behavior. But, the performance of the RSs is much less accurate when used to predict time-varying outputs from a single simulation. If an analysis requires only a small number of scenarios to be investigated, computationally expensive physics-based simulations would likely provide more reliable results. Finally, if the aggregate behavior of a large number of realizations is the focus, as will be the case in probabilistic quantitative risk assessment, the methodology presented here is relatively robust.

54 ENVIRONMENTAL SCIENCES↗

Assessment of shallow subsea hydrocarbons as a proxy for leakage at offshore geologic CO 2 storage sites

We report this study is part of a multi-phase effort to identify and characterize offshore geological carbon storage (GCS) potential along the Texas Gulf Coast. Previous efforts acquired a high-resolution 3D seismic dataset (P-cable™) and interpreted a seismically discontinuous zone as shallow gas pockets (<100 m below seafloor) associated with a vertical chimney structure. Our approach was to measure hydrocarbon concentrations and stable carbon isotopes near the seafloor to assess if gas migrated vertically from seismic anomalies. Deep-sourced thermogenic hydrocarbons would indicate that the structure is transmissive which could indicate an unacceptable risk for GCS at the site. Alternatively, hydrocarbons formed in-situ from biogenic processes would not preclude transmissivity of the structure but would add information to the risk assessment. Gases were extracted from 23 piston core samples recovered between 2.56 and 3.50 m subseafloor. Light hydrocarbons and stable carbon isotopes of methane were used for source attribution. The result was that geochemical signatures were consistent with typical background values observed within the first few meters of subsea sediment and therefore did not indicate leakage from depth. From our analysis, we offer insights into the use of hydrocarbon molecular and isotopic compositions at the seafloor for signal attribution as part of environmental assessments at geological CO 2 storage sites.

54 ENVIRONMENTAL SCIENCES↗

Techno-economic analysis and life cycle assessment for electrochemical ammonia production using proton conducting membrane

Green ammonia production is facing increasing interest on a global scale as a hydrogen carrier for power generation as well as fertilizer for food production. The conventional Haber-Bosch method for ammonia synthesis is energy demanding, requires high purity hydrogen, and is based on fossil fuels. A preliminary techno-economic model for electrochemical ammonia synthesis at near ambient pressure using feed rates of 32 metric ton/day for hydrogen and 135 metric ton/day for nitrogen is presented in this study. Various pathways using different methods for nitrogen generation and hydrogen production were investigated to gain insight into added energy savings per metric ton of ammonia. Electrochemical synthesis using electrolysis for hydrogen and cryogenic nitrogen was found to be a potentially viable pathway for green ammonia. The profitability metrics including discounted cash flow rate of return, net present value and discounted payback period were estimated to be 8%, $40 MM, and 4–6 years respectively for this pathway. The cost of electricity, conversion rate, and conversion efficiency dominate the tonnage cost of ammonia and were used to assess the feasibility of the model. A life cycle assessment was also conducted to assess the environmental impact of a well to product ammonia process.

08 HYDROGEN↗

Assessment of the Residual Error in Soft Tissue Setup in Patients Undergoing Partial Breast Irradiation: Results of a Prospective Study Using Cone-Beam Computed Tomography

Purpose: On-board cone-beam computed tomography (CBCT) provides soft tissue information that may improve setup accuracy in patients undergoing accelerated partial breast irradiation (APBI). We used CBCT to assess the residual error in soft tissue after two-dimensional kV/MV alignment based on bony anatomy. We also assessed the dosimetric impact of this error. Methods and Materials: Ten patients undergoing APBI were studied as part of an institutional review board-approved prospective trial. Patients were aligned based on skin/cradle marks plus orthogonal kV/MV images registered based on bony landmarks to digitally reconstructed radiographs from the planning CT. A subsequent CBCT was registered to the planning CT using soft tissue information. This 'residual error' and its dosimetric impact was measured. Results: The root-mean-square of the residual error was 3, 4, and 4 mm, in the right-left, anterior-posterior, and superior-inferior directions, respectively. The average vector sum was 6 {+-} 2 mm. Average reductions in mean dose to the lumpectomy cavity, clinical target volume (CTV), and planning target volume were 0.1%, 0.4%, and 1%, respectively. The mean difference in the clinical target and planning target volumes that received 95% of the prescribed dose (V95) were 1% and 4%. Conclusions: In this initial study with a modest number of patients, the residual error in soft tissue was typically <5 mm, and with the field margins used, the resultant dosimetric consequences were modest. In patients immobilized in a customized cradle, setup using orthogonal kV images thus appears accurate and reproducible. The CBCT technique may have particular utility in patients with larger breast volumes or breast deformations. Further studies involving larger numbers of patients are needed to further assess the utility of CBCT.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Imaging for Assessment of Radiation-Induced Normal Tissue Effects

Imaging can provide quantitative assessment of radiation-induced normal tissue effects. Identifying an early sign of normal tissue damage with imaging would have the potential to predict organ dysfunction, thereby allowing reoptimization of treatment strategies based on individual patients' risks and benefits. Early detection with noninvasive imaging may enable interventions to mitigate therapy-associated injury before its clinical manifestation. Furthermore, successive imaging may provide an objective assessment of the impact of such mitigation therapies. However, many problems make application of imaging to normal tissue assessment challenging, and further work is required to establish imaging biomarkers as surrogate endpoints of clinical outcome. The performance of clinical trials in which normal tissue injury is a clearly defined endpoint would greatly aid in realization of these goals.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Quantitative Assessment of Workload and Stressors in Clinical Radiation Oncology

Purpose: Workload level and sources of stressors have been implicated as sources of error in multiple settings. We assessed workload levels and sources of stressors among radiation oncology professionals. Furthermore, we explored the potential association between workload and the frequency of reported radiotherapy incidents by the World Health Organization (WHO). Methods and Materials: Data collection was aimed at various tasks performed by 21 study participants from different radiation oncology professional subgroups (simulation therapists, radiation therapists, physicists, dosimetrists, and physicians). Workload was assessed using National Aeronautics and Space Administration Task-Load Index (NASA TLX). Sources of stressors were quantified using observational methods and segregated using a standard taxonomy. Comparisons between professional subgroups and tasks were made using analysis of variance ANOVA, multivariate ANOVA, and Duncan test. An association between workload levels (NASA TLX) and the frequency of radiotherapy incidents (WHO incidents) was explored (Pearson correlation test). Results: A total of 173 workload assessments were obtained. Overall, simulation therapists had relatively low workloads (NASA TLX range, 30-36), and physicists had relatively high workloads (NASA TLX range, 51-63). NASA TLX scores for physicians, radiation therapists, and dosimetrists ranged from 40-52. There was marked intertask/professional subgroup variation (P<.0001). Mental demand (P<.001), physical demand (P=.001), and effort (P=.006) significantly differed among professional subgroups. Typically, there were 3-5 stressors per cycle of analyzed tasks with the following distribution: interruptions (41.4%), time factors (17%), technical factors (13.6%), teamwork issues (11.6%), patient factors (9.0%), and environmental factors (7.4%). A positive association between workload and frequency of reported radiotherapy incidents by the WHO was found (r = 0.87, P value=.045). Conclusions: Workload level and sources of stressors vary among professional subgroups. Understanding the factors that influence these findings can guide adjustments to the workflow procedures, physical layout, and/or communication protocols to enhance safety. Additional evaluations are needed in order to better understand if these findings are systemic.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Automatic Prostate Tracking and Motion Assessment in Volumetric Modulated Arc Therapy With an Electronic Portal Imaging Device

Purpose: To assess the prostate intrafraction motion in volumetric modulated arc therapy treatments using cine megavoltage (MV) images acquired with an electronic portal imaging device (EPID). Methods and Materials: Ten prostate cancer patients were treated with volumetric modulated arc therapy using a Varian TrueBeam linear accelerator equipped with an EPID for acquiring cine MV images during treatment. Cine MV images acquisition was scheduled for single or multiple treatment fractions (between 1 and 8). A novel automatic fiducial detection algorithm that can handle irregular multileaf collimator apertures, field edges, fast leaf and gantry movement, and MV image noise and artifacts in patient anatomy was used. All sets of images (approximately 25,000 images in total) were analyzed to measure the positioning accuracy of implanted fiducial markers and assess the prostate movement. Results: Prostate motion can vary greatly in magnitude among different patients. Different motion patterns were identified, showing its unpredictability. The mean displacement and standard deviation of the intrafraction motion was generally less than 2.0 ± 2.0 mm in each of the spatial directions. In certain patients, however, the percentage of the treatment time in which the prostate is displaced more than 5 mm from its planned position in at least 1 spatial direction was 10% or more. The maximum prostate displacement observed was 13.3 mm. Conclusion: Prostate tracking and motion assessment was performed with MV imaging and an EPID. The amount of prostate motion observed suggests that patients will benefit from its real-time monitoring. Megavoltage imaging can provide the basis for real-time prostate tracking using conventional linear accelerators.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Assessing Cardiac Injury in Mice With Dual Energy-MicroCT, 4D-MicroCT, and MicroSPECT Imaging After Partial Heart Irradiation

Purpose: To develop a mouse model of cardiac injury after partial heart irradiation (PHI) and to test whether dual energy (DE)-microCT and 4-dimensional (4D)-microCT can be used to assess cardiac injury after PHI to complement myocardial perfusion imaging using micro-single photon emission computed tomography (SPECT). Methods and Materials: To study cardiac injury from tangent field irradiation in mice, we used a small-field biological irradiator to deliver a single dose of 12 Gy x-rays to approximately one-third of the left ventricle (LV) of Tie2Cre; p53{sup FL/+} and Tie2Cre; p53{sup FL/−} mice, where 1 or both alleles of p53 are deleted in endothelial cells. Four and 8 weeks after irradiation, mice were injected with gold and iodinated nanoparticle-based contrast agents, and imaged with DE-microCT and 4D-microCT to evaluate myocardial vascular permeability and cardiac function, respectively. Additionally, the same mice were imaged with microSPECT to assess myocardial perfusion. Results: After PHI with tangent fields, DE-microCT scans showed a time-dependent increase in accumulation of gold nanoparticles (AuNp) in the myocardium of Tie2Cre; p53{sup FL/−} mice. In Tie2Cre; p53{sup FL/−} mice, extravasation of AuNp was observed within the irradiated LV, whereas in the myocardium of Tie2Cre; p53{sup FL/+} mice, AuNp were restricted to blood vessels. In addition, data from DE-microCT and microSPECT showed a linear correlation (R{sup 2} = 0.97) between the fraction of the LV that accumulated AuNp and the fraction of LV with a perfusion defect. Furthermore, 4D-microCT scans demonstrated that PHI caused a markedly decreased ejection fraction, and higher end-diastolic and end-systolic volumes, to develop in Tie2Cre; p53{sup FL/−} mice, which were associated with compensatory cardiac hypertrophy of the heart that was not irradiated. Conclusions: Our results show that DE-microCT and 4D-microCT with nanoparticle-based contrast agents are novel imaging approaches complementary to microSPECT for noninvasive assessment of the change in myocardial vascular permeability and cardiac function of mice in whom myocardial injury develops after PHI.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Ventilation/Perfusion Positron Emission Tomography—Based Assessment of Radiation Injury to Lung

Purpose: To investigate {sup 68}Ga-ventilation/perfusion (V/Q) positron emission tomography (PET)/computed tomography (CT) as a novel imaging modality for assessment of perfusion, ventilation, and lung density changes in the context of radiation therapy (RT). Methods and Materials: In a prospective clinical trial, 20 patients underwent 4-dimensional (4D)-V/Q PET/CT before, midway through, and 3 months after definitive lung RT. Eligible patients were prescribed 60 Gy in 30 fractions with or without concurrent chemotherapy. Functional images were registered to the RT planning 4D-CT, and isodose volumes were averaged into 10-Gy bins. Within each dose bin, relative loss in standardized uptake value (SUV) was recorded for ventilation and perfusion, and loss in air-filled fraction was recorded to assess RT-induced lung fibrosis. A dose-effect relationship was described using both linear and 2-parameter logistic fit models, and goodness of fit was assessed with Akaike Information Criterion (AIC). Results: A total of 179 imaging datasets were available for analysis (1 scan was unrecoverable). An almost perfectly linear negative dose-response relationship was observed for perfusion and air-filled fraction (r{sup 2}=0.99, P<.01), with ventilation strongly negatively linear (r{sup 2}=0.95, P<.01). Logistic models did not provide a better fit as evaluated by AIC. Perfusion, ventilation, and the air-filled fraction decreased 0.75 ± 0.03%, 0.71 ± 0.06%, and 0.49 ± 0.02%/Gy, respectively. Within high-dose regions, higher baseline perfusion SUV was associated with greater rate of loss. At 50 Gy and 60 Gy, the rate of loss was 1.35% (P=.07) and 1.73% (P=.05) per SUV, respectively. Of 8/20 patients with peritumoral reperfusion/reventilation during treatment, 7/8 did not sustain this effect after treatment. Conclusions: Radiation-induced regional lung functional deficits occur in a dose-dependent manner and can be estimated by simple linear models with 4D-V/Q PET/CT imaging. These findings may inform future studies of functional lung avoidance using V/Q PET/CT.

62 RADIOLOGY AND NUCLEAR MEDICINE↗