Search NASA⌕ Search

SEARCH · Search NASA

Results for “BALLISTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

The aerodynamics of some guided projectiles

Some characteristic projectile shapes are considered with various added components intended to provide lift, stability, and control. The intent of the additions is to provide some means for altering the normal ballistic flight path of a projectile for various purposes such as: achieving greater accuracy at the impact point, selecting alternate impact points, extending range, improved evasion, and so on. The configurations presented illustrate the effects of a flare, wings, and tails for providing stability and lift, and the effects of aft-tails, a close-coupled flap, and all-moving forward wings for control. The relative merits of the various configurations, all of which provided for flight path alterations are discussed.

Spearman, M. L.↗

Advanced solar electric propulsion (ASEP) for planetary missions

This paper defines an advanced SEP concept based upon demonstrated ion thruster technology improvements and projected improvements in solar array technology. The ASEP concept utilizes an 'integrated' rather than a 'stage' approach and assumes 30 cm Hg ion thrusters capable of operation near 7 kWe each. The mission performance using the ASEP system is presented for three missions: (1) Saturn orbiter, (2) comet rendezvous and (3) comet sample return. The ASEP system provides significant mission performance improvements. The simpler, fewer thruster ASEP system design may provide cost as well as performance benefits for the missions examined when compared to ballistic or SEP stage mission options.

Jones, R. M.↗

A shadowed flow in the stem of the Crab nebula?

The faint radio and emission line 'jet' outward from the northern boundary of the Crab Nebula which appears as a neat right cylinder is modelled here as the convected margin of a gas cloud that accidentially cast its shallow across the nearly ballistic flow of the stellar envelope ejected in the supernova explosion. It is shown that this model is consistent with known data on the jet, and that it accounts for the strikingly regular geometrical features in a natural way. In contrast, flow instability models do not easily result in so neat a cylinder.

Morrison, P.↗

Hypersonic merged-layer flow on a sphere

With the objective to achieve the desired reduction in velocity by aerodynamic forces, an aeroassisted orbital transfer vehicle (AOTV) is expected to fly in the higher region of the atmosphere for a sustained period of time. This aeroassist maneuver will occur in the transitional regime, if the vehicle is designed for a low ballistic coefficient. In this case, a merged-layer (ML) is formed around the space vehicle. The flow characteristics of the vehicle can be studied by making use of the full Navier-Stokes (NS) equations, taking into account slip and temperature jump conditions. The present investigation has the objective to obtain a two-term series solution of the full Navier-Stokes equations with surface slip and temperature jump conditions for the ML flow on a sphere. Attention is given to the mathematical formulation of the problem, the numerical method of integration, and the results.

Jain, A. C.↗

Exterior dimension of fat fractals

Geometric scaling properties of fat fractal sets (fractals with finite volume) are discussed and characterized via the introduction of a new dimension-like quantity which is called the exterior dimension. In addition, it is shown that the exterior dimension is related to the 'uncertainty exponent' previously used in studies of fractal basin boundaries, and it is shown how this connection can be exploited to determine the exterior dimension. Three illustrative applications are described, two in nonlinear dynamics and one dealing with blood flow in the body. Possible relevance to porous materials and ballistic driven aggregation is also noted.

Grebogi, C.↗

Dynamic fission instability of dissipative protoplanets

Analytical and numerical approaches are taken to consider if a rapidly rotating, viscous protoearth would have lost mass by a fission process and thereby given birth to the moon. The fast rotation is assumed as the source of the instability in the dissipative liquid protoearth. Governing hydrodynamic equations are defined for the evolution of the protoearth. Account is taken of viscous dissipation, the pressure equation of state for the atmospheric material sent on a ballistic trajectory, and the effective viscosity. The results indicate that dynamic fission was probably not the process by which the protomoon came into existence.

Boss, A. P.↗

The Influence of Containerless Undercooling and Rapid Solid-State Quenching on the Superconductive and Magnetic Properties of Some Clustering Alloy Systems

The potential of the 100-meter drop-tube for producing materials with new and important properties by their rapid solidification containerless undercooling was investigated. Materials produced exhibit evidence of very rapid quenching. The importance of rapid quenching in producing materials of considerable scientific and technological interest is emphasized. It is indicated that containerless undercooling, using at first a drop tube and eventually a space-shuttle-serviced orbiting laboratory, will provide another powerful approach for rapid quenching. A special advantage of the drop tube is that the microgravity condition is imposed ballistically; it is therefore possible to obtain either spherical samples by allowing solidification to take place in flight, or splats by allowing the sample material while still in undercooled liquid form to impact a stationary quench plate.

Collings, E. W.↗

Laser-photodetector timing station instruction and maintenance manual

A laser photodetector station is used for detecting the arrival of a projectile at a specific point along a ballistic range. The system can be employed on either an open or evacuated range, with small projectiles, and at hypervelocities. The setup procedures, maintenance, and system components are described.

Strader, E. A.↗

Numerical and experimental studies of particle flow in a high-pressure boundary-layer wind tunnel

The approach was to simulate the surface environment of Venus as closely as practicable and to conduct experiments to determine threshold wind speeds, particle flux, particle velocities, and the characteristics of various aeolian bedforms. The Venus Wind Tunnel (VWT) is described and the experimental procedures that were developed to make the high-pressure wind tunnel measurements are presented. In terrestrial simulations of aeolian activity, it is possible to conduct experiments under pressures and temperatures found in natural environments. Because of the high pressures and temperatures, Venusian simulations are difficult to achieve in this regard. Consequently, extrapolation of results to Venue potentially involves unknown factors. The experimental rationale was developed in the following way: The VWT enables the density of the Venusian atmosphere to be reproduced. Density is the principal atmospheric property for governing saltation threshold, particle flux, and the ballistics of airborne particles (equivalent density maintains dynamic similarity of gas flow). When operated at or near Earth's ambient temperature, VWT achieves Venusian atmospheric density at pressures of about 30 bar, or about one third less than those on Venus, although still maintaining dynamic similarity to Venus.

White, B. R.↗

ICIASF '85 - International Congress on Instrumentation in Aerospace Simulation Facilities, 11th, Stanford University, CA, August 26-28, 1985, Record

Developments related to laser Doppler velocimetry are discussed, taking into account a three-component dual beam laser-Doppler-anemometer to be operated in large wind tunnels, a new optical system for three-dimensional laser-Doppler-anemometry using an argon-ion and a dye laser, and a two-component laser Doppler velocimeter by switching fringe orientation. Other topics studied are concerned with facilities, instrumentation, control, hot wire/thin film measurements, optical diagnostic techniques, signal and data processing, facilities and adaptive wall test sections, data acquisition and processing, ballistic instrument systems, dynamic testing and material deformation measurements, optical flow measurements, test techniques, force measurement systems, and holography. Attention is given to nonlinear calibration of integral wind tunnel balances, a microcomputer system for real time digitized image compression, and two phase flow diagnostics in propulsion systems.

Source record↗

Erosive burning research

A status report is given on the results for the completed tests in a series of motor firings being carried out to measure the effects of the parameters that are considered to most strongly influence the scaling to larger rocket motor sizes of the transition to/or threshold conditions for erosive burning rate augmentation. Propellant burning rates at locations along the axis of the test motors are measured with a newly developed plasma capacitance gauge technique. The measured results are compared with erosive-burning predictions from a supporting ballistics analysis. The completed motor firings have successfully demonstrated response to the designed test variables. The trends with varying propellant burning rate, chamber pressure, and mass flow rate are consistent with existing results, but no pronounced effect of surface roughness has been observed. Rather, the influence of propellant oxidizer particle size on erosive burning is through its effect on the base, no-corssflow burning rate.

Strand, L.↗

Acceleration effects in solid propellant rocket motors

The performance variations due to acceleration loads imposed on spinning solid propellant rocket motors are investigated. The four potentially most significant modes of acceleration-induced phenomena are identified from a study of the literature and modeled. The four modes are a mechanical mode which deals with deformations of the propellant and case: a thermodynamic mode which covers acceleration-induced combustion phenomena; a stress mode which covers the stressed propellant's effect on burn rate; and a gas dynamic mode which deals with changes in gas flow in the chamber and through the nozzle. Simplified models of each mode are developed or taken from the literature and are added to an internal ballistics evaluation computer program. The resulting analysis is the first to include all of the modes. In order to do this an original analysis of the mechanical and stress modes was necessary. However, the analysis shows that the stress mode is not important for the circular perforated grains studied. The other effects are shown to have a significant influence on solid rocket motor performance. The magnitude of the different mode effects are such that one may not be ignored over the others as has been done in the past. The results of the analysis are compared to published rocket motor data. The comparisons indicate an erosive burning effect that is a function of spin rate. A qualitative explanation of the erosive effect is presented.

Langhenry, M. T.↗

Dynamic delamination crack propagation in a graphite/epoxy laminate

The dynamic delamination crack propagation behavior during ballistic tests of (90/0)5s T-300/934 graphite/epoxy laminates with embedded interfacial cracks was investigated using high speed photography. The impact on the beam-like specimen was produced with a silicon rubber ball, and the crack propagation speeds and the threshold impact velocities required to initiate dynamic crack propagation were determined for several crack positions. The results suggest that the mode of crack propagation depends on the specimen geometry as well as the loading condition. A simplified finite element analysis of the experimental data obtained from one of the midplane-cracked specimens was used to estimate the critical strain energy release rate, which may determine the onset of unstable crack propagation.

Sun, C. T.↗

Simulation of Airplane and Rocket Trajectories

Simulation and Optimization of Rocket Trajectories program (SORT) contains comprehensive mathematical models for simulating aircraft dynamics, freely falling objects, and many types of ballistic trajectories. Provides high-fidelity, three-degrees-of-freedom simulation for atmospheric and exoatmospheric flight. It numerically models vehicle subsystems and vehicle environment. Used for wide range of simulations. Written in machine-independent FORTRAN 77.

Wahbah, Magdy M.↗

Shifts in shuttle SRM performance because of ammonium perchlorate crystal shape on missions 51-I/J and 61-A/B

The design of the Space Shuttle vehicle configuration requires that the SRMs produce thrust within tightly-controlled limits. These limits provide assurance that Shuttle ascent performance goals will be achieved within the vehicle flight load constraints. The SRM's will perform within these limits if overall SRM reproducibility is maintained. This report will initially describe the excellent performance reproducibility of the 24 SRMs during the first 12 flights STS-8 through STS-26 (Mission 51-F) using the HPM SRM. Secondly, this report will describe the transient phenomena which interrupted the reproducibility in the first 20 sec of flight for four flights (Missions 51-I/J and 61-A/B). The cause of this 20 sec phenomena is postulated to be a change in the crystal shape of the ammonium perchlorate used in the propellant. This shape change coincided with the performance shift on these four flights. The ballistic effect of the crystal shape change is manifested as a change to the generic HUMP or BARF curve of the Shuttle SRM thrust/pressure-time curve. As the crystal shape change was corrected by the vendor, the performance produced by the Shuttle SRM returned to normal.

Blackwell, D. L.↗

Manned Mars mission vehicle design requirements for aerocapture

The goal of this study was to define vehicle design requirements of a reusable system for manned Mars missions which employ aerocapturlng techniques to obtain desired orbital velocities. Requirements for vehicle L/D and ballistic coefficient are determined for expected aerocapture velocities. This paper presents conclusions concerning g-loads environment and TPS requirements for a vehicle that aerocaptures at Mars and Earth. Although the goal of a reusable system (based on current state-of-art technologies) was not obtained, the viability of aerocapture at Mars and Earth was established.

Oliver Hill↗

Study of non-equilibrium transport phenomena

Nonequilibrium phenomena due to real gas effects are very important features of low density hypersonic flows. The shock shape and emitted nonequilibrium radiation are identified as the bulk flow behavior parameters which are very sensitive to the nonequilibrium phenomena. These parameters can be measured in shock tubes, shock tunnels, and ballistic ranges and used to test the accuracy of computational fluid dynamic (CFD) codes. Since the CDF codes, by necessity, are based on multi-temperature models, it is also desirable to measure various temperatures, most importantly, the vibrational temperature. The CFD codes would require high temperature rate constants, which are not available at present. Experiments conducted at the NASA Electric Arc-driven Shock Tube (EAST) facility reveal that radiation from steel contaminants overwhelm the radiation from the test gas. For the measurement of radiation and the chemical parameters, further investigation and then appropriate modifications of the EAST facility are required.

Sharma, Surendra P.↗

Experimental determination of the stable-trim attitudes of two proposed, general-purpose, heat-source modules

Ballistic range tests have been conducted to determine the aerodynamically stable trim attitudes of two proposed general-purpose heat-source module configurations. Tests were conducted at speeds of 4.6 km/sec for the concept module, and at both 4.6 km/sec and 1.4 km/sec for the MOD II. Test results indicated that both configurations were stable when launched in the face-on attitude. When launched in the side-on attitude, the MOD II configuration was found to be stable, while tests of the concept module did not give definitive results.

Kruse, Robert L.↗