Search NASA⌕ Search

SEARCH · Search NASA

Results for “DIODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Scaled-down particle-in-cell simulation of cathode plasma expansion in magnetically insulated coaxial diode

The expansion of cathode plasma in magnetically insulated coaxial diode (MICD) is investigated in theory and particle-in-cell (PIC) simulation. The temperature and density of the cathode plasma are about several eV and 10{sup 13}–10{sup 16 }cm{sup −3}, respectively, and its expansion velocity is of the level of few cm/μs. Through hydrodynamic theory analysis, expressions of expansion velocities in axial and radial directions are obtained. The characteristics of cathode plasma expansion have been simulated through scaled-down PIC models. Simulation results indicate that the expansion velocity is dominated by the ratio of plasma density other than the static electric field. The electric field counteracts the plasma expansion reverse of it. The axial guiding magnetic field only reduces the radial transport coefficients by a correction factor, but not the axial ones. Both the outward and inward radial expansions of a MICD are suppressed by the much stronger guiding magnetic field and even cease.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of crystal length on the thermal characteristic in Nd: YLF laser with 20W diode pumped

Theoretical results are reported on thermal effects along the π- 1047nm and σ- 1053nm polarizations in a cut Nd: YLF rod crystal by using 20W Diode -End-pumped. The crystal length effects on the fraction of absorbed pump radiation converted into heat, radial temperature distribution, and the change in a radial refractive index. The result from this study has shown that a maximum fraction converted into heat is calculated to be around 24% and thermal effects of π-polarized 1047 nm stronger than σ-polarized 1053 nm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterization of a time-resolved non-contact scanning diffuse optical imaging system exploiting fast-gated single-photon avalanche diode detection

We present a system for non-contact time-resolved diffuse reflectance imaging, based on small source-detector distance and high dynamic range measurements utilizing a fast-gated single-photon avalanche diode. The system is suitable for imaging of diffusive media without any contact with the sample and with a spatial resolution of about 1 cm at 1 cm depth. In order to objectively assess its performances, we adopted two standardized protocols developed for time-domain brain imagers. The related tests included the recording of the instrument response function of the setup and the responsivity of its detection system. Moreover, by using liquid turbid phantoms with absorbing inclusions, depth-dependent contrast and contrast-to-noise ratio as well as lateral spatial resolution were measured. To illustrate the potentialities of the novel approach, the characteristics of the non-contact system are discussed and compared to those of a fiber-based brain imager.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Spin-torque diode with tunable sensitivity and bandwidth by out-of-plane magnetic field

Spin-torque diodes based on nanosized magnetic tunnel junctions are novel microwave detectors with high sensitivity and wide frequency bandwidth. While previous reports mainly focus on improving the sensitivity, the approaches to extend the bandwidth are limited. This work experimentally demonstrates that through optimizing the orientation of the external magnetic field, wide bandwidth can be achieved while maintaining high sensitivity. The mechanism of the frequency- and sensitivity-tuning is investigated through analyzing the dependence of resonant frequency and DC voltage on the magnitude and the tilt angle of hard-plane magnetic field. The frequency dependence is qualitatively explicated by Kittel's ferromagnetic resonance model. The asymmetric resonant frequency at positive and negative magnetic field is verified by the numerical simulation considering the in-plane anisotropy. The DC voltage dependence is interpreted through evaluating the misalignment angle between the magnetization of the free layer and the reference layer. The tunability of the detector performance by the magnetic field angle is evaluated through characterizing the sensitivity and bandwidth under 3D magnetic field. The frequency bandwidth up to 9.8 GHz or maximum sensitivity up to 154 mV/mW (after impedance mismatch correction) can be achieved by tuning the angle of the applied magnetic field. The results show that the bandwidth and sensitivity can be controlled and adjusted through optimizing the orientation of the magnetic field for various applications and requirements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

All-optical diode structure based on asymmetrical coupling by a micro-cavity and FP cavity at two sides of photonic crystal waveguide

A high efficiency all-optical diode based on photonic crystal (PC) waveguide has been proposed and numerically investigated by finite-difference time-domain (FDTD) method. The structure is asymmetrically coupled by a micro-cavity containing nonlinear Kerr medium and a FP cavity at sides of PC waveguide. Because of interference between two cavities, Fano peak and FP peak can both appear in transmission spectra and unidirectional transmission can be achieved. The working wavelength can set between two peaks and near to the Fano peak. For forward launch with suitable light intensity, nonlinear Kerr effect of micro-cavity can been excited. It will result in red shift of Fano peak and achieving forward transmission. But for backward launch, a stronger incidence light is needed to the excite Kerr effect due to the design of asymmetric structure. This design has many advantages, including high maximum transmittance, high transmittance contrast ratio, low power threshold, short response time, and ease of integration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hole transport in c-plane InGaN-based green laser diodes

Hole transport in c-plane InGaN-based green laser diodes (LDs) has been investigated by both simulations and experiments. It is found that holes can overflow from the green double quantum wells (DQWs) at high current density, which reduces carrier injection efficiency of c-plane InGaN-based green LDs. A heavily silicon-doped layer right below the green DQWs can effectively suppress hole overflow from the green DQWs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Identification of the primary compensating defect level responsible for determining blocking voltage of vertical GaN power diodes

Electrical performance and characterization of deep levels in vertical GaN P-i-N diodes grown on low threading dislocation density (~10 4 –10 6 cm –2 ) bulk GaN substrates are investigated. The lightly doped n drift region of these devices is observed to be highly compensated by several prominent deep levels detected using deep level optical spectroscopy at E c -2.13, 2.92, and 3.2 eV. A combination of steady-state photocapacitance and lighted capacitance-voltage profiling indicates the concentrations of these deep levels to be N t = 3 × 10 12 , 2 × 10 15 , and 5 × 10 14 cm –3 , respectively. The E c -2.92 eV level is observed to be the primary compensating defect in as-grown n-type metal-organic chemical vapor deposition GaN, indicating this level acts as a limiting factor for achieving controllably low doping. The device blocking voltage should increase if compensating defects reduce the free carrier concentration of the n drift region. Understanding the incorporation of as-grown and native defects in thick n-GaN is essential for enabling large V BD in the next-generation wide-bandgap power semiconductor devices. Furthermore, controlling the as-grown defects induced by epitaxial growth conditions is critical to achieve blocking voltage capability above 5 kV.

30 DIRECT ENERGY CONVERSION↗

Design of p-type cladding layers for tunnel-injected UV-A light emitting diodes

Here, we discuss the engineering of p-AlGaN cladding layers for achieving efficient tunnel-injected III-Nitride ultraviolet light emitting diodes (UV LEDs) in the UV-A spectral range. We show that the capacitance-voltage measurements can be used to estimate the compensation and doping in the p-AlGaN layers located between the multi-quantum well region and the tunnel junction layer. By increasing the p-type doping concentration to overcome the background compensation, on-wafer external quantum efficiency and wall-plug efficiency of 3.37% and 1.62%, respectively, were achieved for the tunnel-injected UV LEDs emitting at 325 nm. We also show that interband tunneling hole injection can be used to realize UV LEDs without any acceptor doping. The work discussed here provides new understanding of hole doping and transport in AlGaN-based UV LEDs and demonstrates the excellent performance of tunnel-injected LEDs for the UV-A wavelength range.

36 MATERIALS SCIENCE↗

Platinum (II) azatetrabenzoporphyrins for near-infrared organic light emitting diodes

In this paper, we describe a series of platinum (II) azatetrabenzoporphyrin emitters for near-infrared (NIR) organic light emitting diode (OLED) applications. Platinum (II) aza-triphenyltetrabenzoporphyrin (PtNTBP) results in a 72 nm shift in the photoluminescent (PL) emission spectrum to 842nm compared to 770nm of the platinum (II) tetraphenyltetrabenzoporphyrin (PtTPTBP). Also, the full width at half maximum of the emission spectrum of PtNTBP was significantly narrowed to 27 nm compared to 40nm for PtTPTBP. The multilayer devices fabricated by thermal vacuum evaporation process employing PtTPTBP, PtNTBP, and cis-PtN 2 TBP exhibit electroluminescent (EL) emission peak at 770 nm, 848 nm, and 846 nm with the peak external quantum efficiency (EQE) of 8.0%, 2.8%, and 1.5%, respectively. Even with the decrease in EQE of devices employing PtNTBP and cis-PtN 2 TBP compared with those employing PtTPTBP, the combination of the spectral narrowing and the bathochromic shift to lower energy EL emission demonstrates the promise of PtNTBP for NIR applications. In the meanwhile, the solution-processed single-layer device using PtNTBP demonstrates the EQE of 0.33% and the peak EL emission at 844 nm.

36 MATERIALS SCIENCE↗

Stable and efficient sky-blue organic light emitting diodes employing a tetradentate platinum complex

A tetradentate Pt(II) complex platinum (II) [10-(9-(4-tert-butylpyridin-2-yl-κN)-9H-carbazol-2-yl-κC 1 )-9,10-dihydro-9,9-dimethyl-3-(1H-pyrazol-1-yl-κN 2 )acridine-1-yl-κC 1 ] (PtN'1N-tBu) incorporating pyrazolyl-acridine as the lumophore was demonstrated to act as a stable and efficient sky-blue emitter. Phosphorescent organic light-emitting diode (OLED) employing PtN'1N-tBu without the electron blocking layer (EBL) achieved a high external quantum efficiency (EQE) of 15.9% and an estimated operational lifetime LT70 of 635 h at an initial luminance of 1000 cd/cm2. The device efficiency could be further improved by adding TrisPCz as EBL, reaching EQE of 17.3% and operational lifetime up to 482 h at 1000 cd/cm2.

36 MATERIALS SCIENCE↗

Analysis of the reverse I-V characteristics of diamond-based PIN diodes

Diamond is one of the most promising candidates for high power and high temperature applications, due to its large bandgap and high thermal conductivity. As a result of the growth and fabrication process of diamond-based devices, structural defects such as threading dislocations (TDs) may degrade the electrical properties of such devices. Understanding and control of such defects are important for improving device technology, particularly the reverse breakdown characteristics. Here, we show that the reverse bias current-voltage characteristics in diamond PIN diodes can be described by hopping conduction and Poole-Frenkel emission through TDs over the temperature (T) range of 323 K < T < 423 K, for typical values of the TD density found in epitaxially grown materials.

Saremi, Mehdi (ORCID:0000000150415886)↗

Impact of carrier localization on recombination in InGaN quantum wells and the efficiency of nitride light-emitting diodes: Insights from theory and numerical simulations

We investigate the effect of carrier localization due to random alloy fluctuations on the radiative and Auger recombination rates in InGaN quantum wells as a function of alloy composition, crystal orientation, carrier density, and temperature. Our results show that alloy fluctuations reduce individual transition matrix elements by the separate localization of electrons and holes, but this effect is overcompensated by the additional transitions enabled by translational symmetry breaking and the resulting lack of momentum conservation. Thus, we find that localization increases both radiative and Auger recombination rates, but that Auger recombination rates increase by one order of magnitude more than radiative rates. Moreover, we demonstrate that localization has an overall detrimental effect on the efficiency-droop and green-gap problems of InGaN light-emitting diodes.

36 MATERIALS SCIENCE↗

Electroluminescent refrigeration by ultra-efficient GaAs light-emitting diodes

Electroluminescence—the conversion of electrons to photons in a light-emitting diode (LED)—can be used as a mechanism for refrigeration, provided that the LED has an exceptionally high quantum efficiency. We investigate the practical limits of present optoelectronic technology for cooling applications by optimizing a GaAs/GaInP double heterostructure LED. We develop a model of the design based on the physics of detailed balance and the methods of statistical ray optics, and predict an external luminescence efficiency of η ext = 97.7% at 263 K. To enhance the cooling coefficient of performance, we pair the refrigerated LED with a photovoltaic cell, which partially recovers the emitted optical energy as electricity. For applications near room temperature and moderate power densities (1.0–10 mW/cm 2 ), we project that an electroluminescent refrigerator can operate with up to 1.7× the coefficient of performance of thermoelectric coolers with ZT = 1, using the material quality in existing GaAs devices. We also predict superior cooling efficiency for cryogenic applications relative to both thermoelectric and laser cooling. Large improvements to these results are possible with optoelectronic devices that asymptotically approach unity luminescence efficiency.

36 MATERIALS SCIENCE↗

Tunnel diode resonator for precision magnetic susceptibility measurements in a mK temperature range and large DC magnetic fields

Precision radio-frequency measurements of the magnetic susceptibility using the tunnel diode resonator (TDR) technique are used to study the delicate effects in magnetic and superconducting materials. High resolution (in ppb range) measurements are particularly important for studies of the London and Campbell penetration depths in a superconductor and for the investigation of magnetic transitions in (anti)ferromagnets. Due to the small rf magnetic-excitation in a mOe range, the TDR is especially useful at low-temperatures in a mK range, if Joule heating generated in the TDR circuitry is efficiently removed and the circuit is stabilized with sub-mK precision. Unfortunately, the circuit has significant magnetic field dependence, and therefore, most of the precision TDR measurements at low-temperatures were conducted in zero magnetic field. In this work, we describe the design of a setup for precision TDR measurements in a dilution refrigerator down to ~40 mK with a 14 T superconducting magnet. The key features of our design are the separated electronics components and the placement of the most field sensitive parts in the field-compensated zone far from the center of solenoid as well as the heat-sinking at a higher temperature stage. As a result, the performance of the working setup is demonstrated using several superconductors.

47 OTHER INSTRUMENTATION↗

Magneto-electroluminescence response in 2D and 3D hybrid organic–inorganic perovskite light emitting diodes

We have studied the magneto-electroluminescence (MEL) response in light emitting diodes based on 2D-(PEA) 2 PbI 4 and 3D-MAPbI 3 hybrid organic–inorganic perovskites at cryogenic temperatures. We found that the MEL is negative, i.e., the EL decreases with the applied field strength, B. In addition, the MEL(B) response has a Lorentzian line shape whose width depends on the perovskite used. We interpret the MEL(B) response using the “Δg mechanism” in which the spin of the injected electron–hole (e–h) pairs oscillates between singlet and triplet configurations due to different precession frequencies of the electron and hole constituents that originate from the difference, Δg, in the electron and hole gyromagnetic constants, g. In this model, the MEL(B) linewidth is inversely proportional to the spin lifetime and Δg. The model used is validated by directly measuring the spin lifetime of photogenerated e–h pairs using the circularly polarized pump–probe transmission technique with 100 fs resolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Domain wall diode based on functionally graded Dzyaloshinskii–Moriya interaction

In this work, we present a general approach for studying the dynamics of domain walls in biaxial ferromagnetic stripes with functionally graded Dzyaloshinskii–Moriya interaction (DMI). By engineering the spatial profile of the DMI parameter we propose the concept of a diode, which implements filtering of domain walls of certain topological charge and helicity. We base our study on phenomenological Landau–Lifshitz–Gilbert equations with additional Zhang–Li spin-transfer terms using a collective variable approach. In the effective equations of motion the gradients of DMI play the role of a driving force which competes with current driving. All analytical predictions are confirmed by numerical simulations.

36 MATERIALS SCIENCE↗

A genetic algorithm approach for reconstructing spectral content from filtered x-ray diode array spectrometers

Filtered diode array spectrometers are routinely employed to infer the temporal evolution of spectral power from x-ray sources, but uniquely extracting spectral content from a finite set of broad, spectrally overlapping channel spectral sensitivities is decidedly nontrivial in these under-determined systems. Here, we present the use of genetic algorithms to reconstruct a probabilistic spectral intensity distribution and compare to the traditional approach most commonly found in the literature. Unlike many of the previously published models, spectral reconstructions from this approach are neither limited by basis functional forms nor do they require a priori spectral knowledge. While the original intent of such measurements was to diagnose the temporal evolution of spectral power from quasi-blackbody radiation sources—where the exact details of spectral content were not thought to be crucial—we demonstrate that this new technique can greatly enhance the utility of the diagnostic by providing more physical spectra and improved robustness to hardware configuration for even strongly non-Planckian distributions.

47 OTHER INSTRUMENTATION↗

Non-uniform longitudinal current density induced power saturation in GaAs-based high power diode lasers

The output power of modern 975 nm GaAs-based broad area diode lasers is limited by increasing carrier and photon losses at high bias. Here, we use experiment and one-dimensional calculations on these devices to reveal that higher current densities (and hence higher local recombination rates and higher losses) arise near the front facet due to spatial hole burning and that the non-uniformity is strongly affected by laser geometry, which is more severe for longer resonators and less severe for higher front facet reflectivity. Specifically, we use devices with a segmented p-contact to directly measure the current distribution along the resonator and compare this with laser simulation. Devices with a 6 mm resonator show 29% more current at the front than back, twice as large as the 15% current non-uniformity in devices with a 3 mm resonator. In contrast, increased front facet reflectivity (20% rather than 0.8%) is shown to almost halve the current non-uniformity from 29% to 18% in devices with a 6 mm resonator and reduces power saturation. Although the magnitude of current non-uniformity in experiment and theory is broadly consistent, in experiment, an additional divergence is seen in current flow (and hence recombination rate) near the facets, and earlier power saturation occurs. Finally, we discuss the possible saturation mechanisms that are not included in the simulation.

47 OTHER INSTRUMENTATION↗