Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Synchrotron X-ray Diffraction Investigation of the Anomalous Behavior of Ice During Freezing of Aqueous Systems

Simple aqueous systems, i.e., phosphate-glycine buffers and pure water, were studied at subambient temperatures by X-ray difractometry using a high-intensity synchrotron radiation source at the Advanced Photon Source of Argonne National Laboratory. Complex X-ray diffraction (XRD) patterns, with two or more poorly resolved peaks in place of each of the four diagnostic peaks of hexagonal ice, 100, 002, 101, and 102, referred as 'splitting', were observed in the majority of cases. The splitting of up to 0.05 {angstrom} (d-spacing) was detected for 100, 002, and 101 peaks, whereas 102 peak was less affected. Deformation of the lattice of hexagonal ice, probably due to local stress created on the ice/ice or ice/container interface during water-to-ice transformation, is proposed as a possible mechanism for the observed splitting of XRD peaks. Using molecular modeling, it was estimated that the observed shifts in the peak positions are equivalent to applying a hydrostatic pressure of 2-3 kbars. The splitting can be used to quantify stresses during freezing, which could improve our understanding of the role of water-to-ice transformation on the destabilization of proteins and other biological systems.

43 PARTICLE ACCELERATORS↗

Synthesis and in situ high pressure Raman spectroscopy study of AlN dendritic crystal

Graphical abstract: - Highlights: • The sample is the typical dendritic crystal structure. • The phase transition of AlN dendritic crystal is researched. • The Raman signal of rock salt AlN is observed under high pressure. • Grüneisen parameters and phase transition criterion are discussed. - Abstract: AlN dendritic crystal was synthesized by the direct current arc discharge apparatus. X-ray diffraction (XRD) patterns indicated that the sample is hexagonal AlN and preferentially grown along the a-axis direction. Scanning electron microscopy (SEM) and Transmission electron microscopy (TEM) images reveal that the product mainly consists of micron AlN dendritic crystal. In situ high pressure Raman spectra of AlN dendritic crystal has been measured in the pressure ranged from ambient pressure to 32.97 GPa at room temperature by using diamond anvil cell. According to the Raman scattering results, the phase transition from the wurtzite to rock salt was found at about 20.73 GPa by the appearance of a new Raman signal. Above 20.73 GPa, a new Raman signal due to disorder-activated Raman scattering in the rock salt phase was observed. In addition, the pressure coefficients, phase transition criterion, and mode Grüneisen parameters of AlN dendritic crystal, which could be different from that of other AlN, are carefully discussed.

36 MATERIALS SCIENCE↗

Doping effect on the structural properties of Cu{sub 1−x}(Ni, Zn, Al and Fe){sub x}O samples (0<x<0.10): An experimental and computational study

In this work, the effect of insertion of transition metal, TM (=Ni, Zn, Al and Fe), ions in Cu{sub 1−x}TM{sub x}O samples (0<x<0.10) prepared via co-precipitation method is studied through experimental and computational methods. The analyses of X-ray diffraction (XRD) patterns using Rietveld refinement show that i) at x=0, all samples present a monoclinic crystal system with space group C2/c and ii) for increasing the TM-doping, Ni and Zn-doped samples show a small amount of spurious phases for concentrations above x=0.05. Based on these results, a defect disorder study for using atomistic computational simulations which is based on the lattice energy minimization technique is employed to predict the location of the dopant ions in the structure. In agreement with XRD data, our computational results indicate that the trivalent (Al and Fe ions) are more favorable to be incorporated into CuO matrix than the divalent (Ni and Zn ions). - Graphical Abstract: The effect of insertion of transition metal, TM (=Ni, Zn, Al and Fe), ions in Cu{sub 1−x}TM{sub x}O samples (0<x<0.10) prepared via co-precipitation method is studied through experimental and computational methods. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reitveld refinement study of PLZT ceramics

PLZT ceramics of composition Pb{sub 0.93}La{sub 0.07}(Zr{sub 0.60}Ti{sub 0.40})O{sub 3}, have been milled for 6hrs and 24hrs were prepared by solid state synthesis route. The 6hrs milled and 24hrs milled samples are represented as PLZT-6 and PLZT-24 ceramics respectively. X-ray diffraction (XRD) pattern was recorded at room temperature. The XRD pattern has been analyzed by employing Rietveld refinement method. Phase identification shows that all the peaks observed in PLZT-6 and PLZT-24 ceramics could be indexed to P4mm space group with tetragonal symmetry. The unit cell parameters of 6hrs milled PLZT ceramics are found to be a=b=4.0781(5)A and c=4.0938(7)A and for 24hrs milled PLZT ceramics unit cell parameters are a=b=4.0679(4)A and c=4.1010(5)A . The axial ratio c/a and unit cell volume of PLZT-6 are 1.0038 and 68.09(2)A{sup 3} respectively. In PLZT-24 samples, the axial ratio c/a value is 1.0080 which is little more than that of the 6hr milled PLZT sample whereas the unit cell volume decrease to 67.88 (1) A{sup 3}. An average crystallite size was estimated by using Scherrer's formula. Dielectric properties were obtained by measuring the capacitance and tand loss using Stanford LCR meter.

36 MATERIALS SCIENCE↗

Tuning the Magnetic Properties of ZnFe{sub 2}O{sub 4} Nanoparticles Through Partial Doping and Annealing

The aim of this study was to investigate the effect of annealing temperature and cobalt cation (Co{sup 2+}) doping on the magnetic properties of zinc ferrite (ZFO) nanoparticles. The nanoparticles were prepared through sol-gel combustion process with citric acid as the fuel. The obtained nanoparticles were annealed at several temperatures from 300 to 1000 °C for 2 h. Spinel formation was proved by X-ray diffraction (XRD) patterns, and the average crystallite size in all samples was estimated between 22 and 32 nm. It is worthwhile to mention that Fe{sub 2}O{sub 3} and ZnO are detected as the medium phases. Meanwhile, Fe{sub 2}O{sub 3} phase transformation to the other allotropes has happened around 400 °C and was characterized via the simultaneous thermal analysis (STA) and XRD. For higher annealing temperatures, diffusion has gradually been completed and, finally, the single phase of spinel structure was prepared at 1000 °C. In addition, field-emission scanning electron microscopy (FESEM) images revealed that the nanoparticle size after annealing was between 30 and 200 nm for the whole samples. The formation of the spinel phase was considered the most important factor on the magnetic properties of ZFO. Cobalt doping, annealing temperature, and also Fe{sub 2}O{sub 3} phase were the main factors on changing magnetic properties. Paramagnetic nanoparticles with higher coercivity for doped samples rather than un-doped samples have been obtained.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Novel mixed hydroxy-carbonate precursor assisted synthetic technique for LiNi{sub 1/3}Mn{sub 1/3}Co{sub 1/3}O{sub 2} cathode materials

Highlights: • MHC method used to overcome drawbacks of solid state synthesized materials. • Least cation mixing, phase purity, good reversibility and rate capability achieved. • XRD I {sub 0} {sub 0} {sub 3}/I{sub 1} {sub 0} {sub 4} factor, indicating electrochemical reactivity is maximum at 1.6984. • Li/LiNi{sub 1/3}Mn{sub 1/3}Co{sub 1/3}O{sub 2} cell delivered an initial discharge capacity of 175 mAh g{sup −1}. - Abstract: Novel mixed hydroxy-carbonate (MHC) precursors were used to synthesis technique of LiNi{sub 1/3}Mn{sub 1/3}Co{sub 1/3}O{sub 2} cathode material. The powder X-ray diffraction (XRD) pattern of the synthesized LiNi{sub 1/3}Mn{sub 1/3}Co{sub 1/3}O{sub 2} cathode materials exhibited a hexagonal cell with a = 2.8535 Å and c = 14.2040 Å. Fourier transform infrared spectroscopy (FT-IR) spectrum of MHC and LiNi{sub 1/3}Mn{sub 1/3}Co{sub 1/3}O{sub 2} consistent with vibration modes of functional group. Presence of sub-micrometer particle size (200 nm) and highly crystalline morphology confirmed using scanning electron microscopy (SEM). X-ray photoelectron spectroscopy (XPS) suggested that oxidation state of the transition metals; Ni in +2, Mn in +4 and Co in +3 states, respectively in LiNi{sub 1/3}Mn{sub 1/3}Co{sub 1/3}O{sub 2} cathode materials. Cyclic voltammograms (CV) revealed only one major redox couple at 4 V and suggested the absence of structural transitions from hexagonal to monoclinic structure. The Li vs. LiNi{sub 1/3}Mn{sub 1/3}Co{sub 1/3}O{sub 2} cell delivered an initial discharge capacity of 175 mAh g{sup −1} in the voltage range 2.5–4.6 V @ 0.1 C.

36 MATERIALS SCIENCE↗

Isomorphous substitution of europium for strontium in the structure of synthetic hydroxovanadate

Polycrystalline strontium-europium hydroxovanadates Sr{sub 10-x}Eu{sub x}(VO{sub 4}){sub 6}(OH){sub 2-x}O{sub x} were synthesized and studied by X-ray powder diffraction, infrared absorption and diffuse-reflectance spectroscopies and also thermogravimetry. The single-phase region of isomorphous substitution of Eu for Sr in hydroxovanadate has been found to lie in the compositional interval 0{<=}x{<=}0.18 at 800 deg. C. Refinement of X-ray diffraction (XRD) patterns by the Rietveld method shows that Eu substitutes for Sr preferentially at the Sr(1) sites of the apatite structure. The substitution results in a more uniform distribution of Sr-O bond lengths in coordination polyhedra both around Sr (1) and Sr (2) sites and also in a slight contraction of the vanadate anion VO{sub 4}{sup 3-}. Synthetic Sr hydroxovanadates absorb a considerable amount of water in two forms: capillary condensed and chemically combined. The latter form may be absorbed at temperatures as high as 500 deg. C. - Graphical abstract: The results of this paper contribute to a general picture of substitution effects of the rare-earth (RE) elements in the apatite structure. The dependence of the substitution limit x{sub max} in Sr{sub 10-x}RE{sub x}(VO{sub 4}){sub 6}(OH){sub 2-x}O{sub x} on the atomic number of the RE element is shown here with the present data marked with red color.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and electrochemical properties of nanosized LiFeO{sub 2} particles with a layered rocksalt structure for lithium batteries

Highlights: Black-Right-Pointing-Pointer 40-nm-sized O3-LiFeO{sub 2} exhibits higher discharge capacities and rate characteristics than 400-nm-sized O3-LiFeO{sub 2}. Black-Right-Pointing-Pointer The cation disorder of Li and Fe ions might have affected the electrochemical activity of the O3-LiFeO{sub 2} nanoparticles. Black-Right-Pointing-Pointer A phase change from a layered structure to a cubic structure during electrochemical cycling. Black-Right-Pointing-Pointer The new cubic phase allowed a stable electrochemical reaction between 4.5 and 1.0 V. -- Abstract: Layered rocksalt-type LiFeO{sub 2} particles (O3-LiFeO{sub 2}) with average particle sizes of ca. 40 and 400 nm were synthesized by an ion exchange reaction from {alpha}-NaFeO{sub 2} precursors. X-ray diffraction (XRD) patterns and scanning electron microscopy (SEM) images confirmed the formation of nanosized O3-LiFeO{sub 2}. 40-nm LiFeO{sub 2} exhibited a higher discharge capacity (115 mAh g{sup -1}) than 400-nm LiFeO{sub 2} (80 mAh g{sup -1}), and also had better rate characteristics. The downsizing effect and cation disorder between the lithium and iron layers may have improved the electrochemical activity of the LiFeO{sub 2} particles. Transmission electron microscopy (TEM) observation indicated a phase transition from O3-LiFeO{sub 2} to a cubic lattice system during the electrochemical process. The cubic lithium iron oxide exhibited stable electrochemical reactions based on the Fe{sup 2+}/Fe{sup 3+} and Fe{sup 2+}/Fe{sup 0} redox couples at voltages between 4.5 and 1.0 V. The discharge capacities of 40-nm LiFeO{sub 2} were ca. 115, 210, and 390 mAh g{sup -1} under cutoff voltages of 4.5-2.0 V, 4.5-1.5 V, and 4.5-1.0 V, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Local structure of ball-milled LaNi{sub 5} hydrogen storage material by Ni K-edge EXAFS

Local structure of the nanostructured LaNi{sub 5} hydrogen storage alloys, prepared by ball-milling, has been studied using Ni K-edge extended X-ray absorption fine structure spectroscopy. Results indicate that the ball-milling up to 100 h results in the production of nanoparticles characterized by large atomic disorder and slightly reduced unit-cell volume, compared to the bulk LaNi{sub 5}. High temperature annealing appears to help in partial recovery of atomic order in the ball-milled samples; however, long-time ball-milled samples retain large disorder even after the high temperature annealing. The results suggest that the large disorder and the reduced unit-cell volume might be causing a higher energy-barrier for the hydride-phase formation in the long time ball-milled LaNi{sub 5} powders. - Graphical Abstract: X-ray diffraction (XRD) pattern (left panel) and Fourier transforms of the Ni K-edge extended X-ray absorption fine structure (EXAFS) spectroscopy (right panel) of bulk LaNi{sub 5} hydrogen storage material (structure model is given in the middle) together with the same after 100 h ball-milling. Milled samples show a remarkable reduction intensity and broadening of the XRD peaks. Substantial damping of the amplitude and a slight shrinkage of the profile are observed in the EXAFS spectrum. These results indicate that the ball-milling up to 100 h results in the production of nanoparticles characterized by slightly reduced unit-cell volume and substantial atomic disorder compared to the bulk LaNi5. High temperature annealing appears to help in partial recovery of atomic order in the ball-milled samples; however, long-time ball-milled samples retain the disorder even after the high temperature annealing. The results suggest that the large disorder and the reduced unit-cell volume might be causing a higher energy-barrier for the hydride-phase formation in the long-time ball-milled LaNi{sub 5} powders.

36 MATERIALS SCIENCE↗

A Comparative Study of Physical Properties of Er and Yb Nanophase Ferrite for Industrial Application

Nano ferrites CuCr{sub 0.3}Er{sub 0.03}Fe{sub 1.67}O{sub 4} and CuCr{sub 0.3}Yb{sub 0.03}Fe{sub 1.67}O{sub 4} were synthesized using standard ceramic technique. X-ray diffraction (XRD) patterns confirmed that the samples had cubic spinel structures. The average crystallite sizes of Er and Yb samples were in the range of 104.2–100 nm. The morphology analyses using field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM) and atomic force microscopy (AFM) confirmed that the samples were in the nanoscale range. The compositional analyses using energy-dispersive x-ray (EDX) showed the atomic percentage (at.%) and weight percentage (wt%) of the investigated samples. The magnetic properties were carried out at room (300 K) and at low (100 K) temperatures magnetic hysteresis loop. The data showed that Er sample had higher saturation magnetization (M{sub s}) and lower coercivity (H{sub c}) than that of Yb sample suggesting that Er sample can be applied in magnetic applications. Moreover, Er sample had higher dielectric constant (ε’), dielectric loss (ε”) and dielectric loss tangent (tan δ) than that of Yb sample. However, Yb sample had higher resistivity than that of Er sample suggesting that Yb sample can be applied in electrical applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Polyaniline-Modified TiO{sub 2}, a Highly Effective Photo-catalyst for Solid-Phase Photocatalytic Degradation of PVC

A series of polyaniline-modified TiO{sub 2} photo-catalysts (TiO{sub 2}@PANI) were prepared via an in-situ polymerization of aniline onto TiO{sub 2} nanoparticles. The Fourier-transform infrared spectroscopy (FT-IR) and thermogravimetric analyses (TGA) confirmed that the polyaniline (PANI) successfully grafted on the TiO{sub 2} NPs. The X-ray diffraction (XRD) patterns showed that the crystalline structure of the TiO{sub 2} did not change during the preparation of PANI. Photodegradable nanocomposites were prepared by embedding the photocatalysts into the commercial poly(vinyl chloride) (PVC) samples. The nanocomposite films were compared against pure PVC and PVC-TiO{sub 2} films for their photodegradation performances. The photocatalytic activity of the TiO{sub 2}@PANI catalysts improved with an increase in the inorganic/organic molar ratio. With the TiO{sub 2} aniline molar ratio of 10, the PVC-TiO{sub 2}@PANI nanocomposite film lost about 67% of its weight after 720 h irradiation under UV. Meanwhile, the pure PVC and PVC-TiO{sub 2} control films lost about 12 and 45% of their initial weights, respectively. Results showed that the rate at which the PVC is photodegraded can be controlled by the amount of the TiO{sub 2} NPs as well as the initial TiO{sub 2} aniline molar ratio. The SEM micrograms indicated a rougher and more porous surface for the irradiated PVC-TiO{sub 2}@PANI compared with controls. .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural- and optical-property characterization of three-dimensional branched ZnO nanospikes

Current study reports the synthesis of three-dimensional (3-D) ZnO nanospikes with anomalous optical property, where zinc stearate is adopted as a safe, common and low-cost precursor that undergoes thermal pyrolysis under non-hydrolytic approach. High resolution transmission electron microscope (HRTEM) and scanning electron microscope (SEM) result show that the as-synthesized 3-D ZnO nanospikes are constructed by bundle of nanorods that sprout radially outwards in random orientation. The possible growth mechanism is discussed by referring to the microscopy results. X-ray diffraction (XRD) pattern confirms that the nanospikes are highly crystalline, which existed in hexagonal wurtzite crystal structure. Optical absorption characterization shows that the onset absorption for the nanospikes is slightly red-shifted if compared to commercial ZnO and the corresponding bandgap energy is estimated to be 3.1 eV. The photoluminescene (PL) result of ZnO nanospikes indicate that its optical emission exhibits weak UV emission but very intense visible-light emission that ranged from green- up to red-region. The factors that contributed to the intriguing PL characteristic are discussed. Current finding would offer a versatile synthesis scheme in engineering advanced nanostructures with new design that exhibit congruent optical property. - Graphical abstract: Display Omitted - Highlights: • Pyrolysis of zinc stearate in synthesizing 3-D ZnO nanospikes • ZnO nanospikes possess bundle of nanorods that sprout out from the hexagonal stump • Growth mechanism is deduced to elucidate the morphological evolution from nanobullet to nanospike with branching topology • PL spectrum indicate that the nanospike exhibit prominent visible-light emission that ranged from green- to red-region.

36 MATERIALS SCIENCE↗

Low temperature dielectric and conductivity relaxation studies on magnetoelectric Pb(Fe{sub 2/3}W{sub 1/3})O{sub 3}

The single phase perovskite Pb(Fe{sub 2/3}W{sub 1/3})O{sub 3} [PFW] was synthesized by modified low – temperature (sintering at 850°C) solid-state reaction. Rietveld refinement ofroom temperature (RT) X-ray diffraction (XRD) and neutron diffraction (ND) patterns of the samples confirm the single phase formation with cubic structure (Pm-3m). Surface morphology of the compounds was studied by Scanning electron microscope (SEM) and average grain size was estimated to be ∼2 µm. The RT dielectric properties of PFW ceramic are studied as a function of frequency from 100 - 1MHz. The temperature dependent (120 – 293K) dielectric properties were studied at few selected frequencies. We found the frequency dependent dielectric constant shows increasing trend with increase in temperature from 120 – 293K, with minimum dielectric loss. The frequency dependence of dielectric loss shows a maximum in between 10 Hz and 1 kHz, confirms the extrinsic phenomena like interfacial polarization due to space charge accumulation at grain boundaries. Impedance spectroscopy is used to study the electrical behaviour of PFW in the frequency range from 100 to 1MHz and in the temperature range from 120 - 293 K. The frequency-dependent electrical data are analysed by impedance formalisms and shows the relaxation (conduction) mechanism in the sample. We suggest this low temperature sintered PFW is a suitable candidate for the multilayer ceramic capacitorsandrelated negative temperature coefficient of resistance type (NTCR) behavior like that of semiconductors.

36 MATERIALS SCIENCE↗

Temperature Dependent Raman Spectroscopic Study of the Fe Doped La{sub 0.67}Sr{sub 0.33}MnO{sub 3} Prepared Using Ball Milling Method

Polycrystalline samples of La{sub 0.67}Sr{sub 0.33}Mn{sub 0.65}Fe{sub 0.35}O{sub 3} (LSMFO) were synthesized using the standard ball mill method with different calcination temperatures ranging from 800 to 1100°C for 7 h. The phase purity of these samples was confirmed using X-ray diffraction (XRD) patterns. All samples were found to have rhombohedral crystal structure with R 3-bar c space group. The lattice parameters, cell volume, bond angle and bond length have been obtained using the Rietveld refinement by FullProf software. The average crystallite size calculated using the Debye-Scherrer formula was found between 27 and 60 nm. Surface morphology of the prepared samples has been examined using a scanning electron microscope (SEM). SEM images show the formation of well-arranged grain sizes distributed from 240 to 400 nm, much larger than one estimated using the Scherrer formula. All tiny particles are highly agglomerated with the increasing temperature and porosity decreases with increasing temperature. An analysis of the frequency and peak broadening of Raman modes as a function of temperature clearly shows the significant temperature effect on the A{sub 1g} and E{sub g} modes of LSMFO. The shifts and broadening of the A{sub 1g} and E{sub g} modes are discussed in light of the oxygen sublattice distortion. Our study shows the reduction in distortion with increasing calcination temperature, which suggests a decrease in the JT effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The influence of A-site rare-earth for barium substitution on the chemical structure and ferroelectric properties of BZT thin films

Rare-earth (RE) doped Ba(Zr,Ti)O{sub 3} (BZT) thin films were prepared by rf-magnetron sputtering from a Ba{sub 0.90}Ln{sub 0.067}Zr{sub 0.09}Ti{sub 0.91}O{sub 3} (Ln=La, Nd) target. The films were deposited at a substrate temperature of 600 deg. C in a high oxygen pressure atmosphere. X-ray diffraction (XRD) patterns of RE-BZT films revealed a <001> epitaxial crystal growth on Nb-doped SrTiO{sub 3}, <001> and <011> growth on single-crystal Si, and a <111>-preferred orientation on Pt-coated Si substrates. Scanning electron microscopy (SEM) showed uniform growth of the films deposited, along with the presence of crystals of about half-micron size on the film's surface. Transmission electron microscopy (TEM) evidenced high crystalline films with thicknesses of about 100 nm for 30 min of sputtering. Electron-probe microanalysis (EPMA) corroborated the growth rate (3.0-3.5 nm/min) of films deposited on Pt-coated Si substrates. X-ray photoelectron spectroscopy (XPS), in depth profile mode, showed variations in photoelectron Ti 2p doublet positions at lower energies with spin-orbital distances characteristic of BaTiO{sub 3}-based compounds. The XPS analysis revealed that lanthanide ions positioned onto the A-site of the BZT-perovskite structure increasing the MO{sub 6}-octahedra distortion (M=Ti, Zr) and, thereby, modifying the Ti-O binding length. Polarization-electric field hysteresis loops on Ag/RE-doped BZT/Pt capacitor showed good ferroelectric behavior and higher remanent polarization values than corresponding non-doped system. - Graphical abstract: XPS narrow-scan spectra of Ti 2p doublets of the Nd-doped BZT films deposited on Pt-coated Si substrate.

36 MATERIALS SCIENCE↗

Insertion-release of guest species and ionic conduction in polyoxometalate solids with a layer-like Anderson structure

The precipitation of Na{sup +} and K{sup +} mixed salts of Anderson type [SbW{sub 6}O{sub 24}]{sup 7-} by addition of excess of NaNO{sub 3} and NaCl yielded polycrystalline powders of Na{sub 2.5}K{sub 5.3}[SbW{sub 6}O{sub 24}](NO{sub 3}){sub 0.8}.12H{sub 2}O (1) and Na{sub 2}K{sub 5.35}[SbW{sub 6}O{sub 24}]Cl{sub 0.35}.12H{sub 2}O (2), respectively. The two compounds are isomorphous and exhibit a layer-like Anderson (LLA) type structure, which consists of [SbW{sub 6}O{sub 24}]{sup 7-}-containing layers and interstitial Na{sup +}, K{sup +}, NO{sub 3}{sup -} or Cl{sup -}, and water O atoms. Recrystallization of 1 and 2 from hot water yielded Na{sub 2}K{sub 5.4}[SbW{sub 6}O{sub 24}](NO{sub 3}){sub 0.4}.12H{sub 2}O (1-recry) and Na{sub 2}K{sub 5.25}[SbW{sub 6}O{sub 24}]Cl{sub 0.25}.12H{sub 2}O (2-recry) as a result of partial release of NO{sub 3}{sup -} and Cl{sup -} (and Na{sup +} and K{sup +} for charge compensation). Dehydration of 1 and 2 at 400 and 500 {sup o}C (1-dehyd400 and 2-dehyd500) caused a shrinkage of lattice, but their the LLA structures retained. Simulation of X-ray diffraction (XRD) patterns for the dehydrated forms allowed to presume that the each [SbW{sub 6}O{sub 24}]{sup 7-} anion had been 30{sup o}-rotated within its molecular plane in order to avoid intermolecular repulsion. A compressed powder of 1-dehyd400 exhibited fast alkaline-ion conduction with a bulk conductivity of 1.2x10{sup -2} {Omega}{sup -1} cm{sup -1} at 400 {sup o}C. The hosting of a sufficient amount of NO{sub 3}{sup -} together with Na{sup +} for charge compensation into the lattice is crucial for high conduction. -- Graphical abstract: Two compounds Na{sub 2.5}K{sub 5.3}[SbW{sub 6}O{sub 24}](NO{sub 3}){sub 0.8}.12H{sub 2}O (1) and Na{sub 2}K{sub 5.35}[SbW{sub 6}O{sub 24}]Cl{sub 0.35}.12H{sub 2}O (2) possessing a layer-like Anderson (LLA) structure exhibited pseudo intercalation-deintercalation behavior. The dehydrated form of 1 is a high alkaline cation conductor with a conductivity of 1.2x10{sup -2} {Omega}{sup -1} cm{sup -1} at 400 {sup o}C. Display Omitted Research highlights: {yields} Layer-like Anderson-type POM solid accommodates and releases NO{sub 3}{sup -} and Cl{sup -}. {yields} The POM exhibits reversible dehydration by heat treatment. {yields} The dehydration involves rotation of POM molecule retaining layer structure. {yields} The dehydrated POM shows good Na{sup +} and K{sup +} conduction.

36 MATERIALS SCIENCE↗

Size-dependent structural phase transitions and their correlation with photoluminescence and optical absorption behavior of annealed Zn0.45Cd0.55S quantum dots

Highlights: • Thermal Induced Structural Phase transition in nanostructured Zn{sub 0.45}Cd{sub 0.55}S. • Low temperature structural phase transition from cubic to hexagonal structure. • Thermal annealing effect on FTIR and Raman Spectra. • Thermal annealing effect on optical absorption of Zn{sub 0.45}Cd{sub 0.55}S nanoparticles. • Excitation-wavelength dependent photoluminescence emission spectra. - Abstract: In this paper, we investigate the effect of thermally induced structural phase transitions on the photoluminescence (PL) and optical absorption behaviour of Zn{sub 0.45}Cd{sub 0.55}S nanoparticles (NPs). Analysis of X-ray diffraction (XRD) patterns and high-resolution electron microscope (HRTEM) images reveal that the as-synthesized sample possesses zinc-blende-type cubic structure. In addition, at annealing temperature (T{sub a}) 400 °C, the cubic structure transforms completely into the wurtzite-type hexagonal structure. Furthermore, the second phase transition of the as-synthesized sample has observed at 700 °C, where the cubic structure has transformed into mixed polycrystalline phases of hexagonal ZnO, cubic CdO, monoclinic CdSO{sub 3}, and orthorhombic ZnSO{sub 4} structures. These new phases have also confirmed from the analysis of Raman and FTIR spectra. Analysis of UV–visible optical absorption spectra demonstrates that Increasing T{sub a} results in the decrease of optical band gap due the improvement in crystallinity accompanied by the increase in the particle size. The PL emission bands at an excitation energy of 3.818 eV exhibit redshift and a decrease in the intensity with increasing T{sub a} up to 500 °C. Meanwhile, further increase in T{sub a} up to 700 °C results in the enhancement of green emission intensity. On the other hand, PL emission spectra at 3.354 eV and T{sub a} 700 °C, reveal a dramatic increase in the emission intensity nearly by one-order of magnitude with respect to its value of the as-synthesized sample. This behaviour is ascribed to the incorporation of oxygen-related defects via thermal annealing in air, which act as additive radiative centers. Also, we have interpreted the observed spectral blue shift of PL emission spectrum with increasing excitation energy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Role of Eu{sup 2+} on the blue‐green photoluminescence of In{sub 2}O{sub 3}:Eu{sup 2+} nanocrystals

Blue‐green light emitting undoped and europium doped indium oxide nanocrystal were synthesized by simple precipitation method. X-ray diffraction (XRD) pattern confirmed the cubic phase of undoped and europium doped samples. Further, transmission electron microscopy (TEM), scanning electron microscopy (SEM) , energy dispersive analysis of X-rays (EDAX), Fourier transform infra-red (FT-IR), photoluminescence (PL), electron paramagnetic resonance (EPR) studies were performed to characterise the samples. PL analysis of the samples is the core of the present research. It includes excitation, emission and CIE (Commission Internationale de l’e´ clairage) studies of the samples. On doping europium to In{sub 2}O{sub 3} lattice, ln{sup 3+} site is substituted by Eu{sup 2+} thereby increasing the concentration of singly ionized oxygen vacancy and hence blue–green emission from the host is found to increase. Further, this increase in blue–green emission after doping may also be attributed to 4f → 5d transitions of Eu{sup 2+}. However, the blue–green PL emission is found to decrease after an optimum dopant concentration (Eu{sup 2+} = 4%) due to luminescence and size quenching. CIE co-ordinates of the samples are calculated to know colour of light emitted from the samples. It suggests that this blue–green light emitting In{sub 2}O{sub 3}: Eu{sup 2+} nanocrystals may find application in lighting such as in generation of white light. - Highlight: • XRD and TEM study confirms the synthesis of cubic doped and europium doped nanocrystals. • EPR study reveals the doped europium is in + 2 oxidation state. • Enhance PL emission intensity of host material due to increase in singly ionized oxygen vacancy and 4f–5d transitions of Eu{sup 2+} • CIE co-ordinates suggest the blue–green colour of the samples.

36 MATERIALS SCIENCE↗