Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dimensionless Numbers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Quasi-helical symmetry at finite aspect ratio

Computational stellarator optimization is used to create a configuration which is quasi-helically symmetric at finite aspect ratio. For the aspect ratio per period chosen ({approx}2), this procedure results in benign properties throughout the plasma volume.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Charging of submicron structures during silicon dioxide etching in one- and two-frequency gas discharges

A model that combines the Monte Carlo method for calculating electron and ion trajectories in three-dimensional geometry and an analytic approach developed for calculating an electric field in two-dimensional geometry is used to simulate the charging of the surface of periodic submicron SiO{sub 2} structures by electron and ion fluxes in the plasma of a one- and a two-frequency capacitive RF discharge. The energy distribution function of the electrons and ions that come to the bottom of a submicron structure in an argon and an argon-containing plasma is calculated for structures with a width of 11-45 nm and an aspect ratio of d/w = 1-10 (where d and w are the depth and width of the structure). It is shown that secondary electronelectron emission plays an important role in the redistribution of the electric charge and, accordingly, of the electric potential in a submicron structure. It is demonstrated that, when the secondary electron-electron emission mechanism is taken into account, the ion energy spectrum at the bottom of a submicron structure is shifted toward lower energies and becomes broader in comparison with the spectrum of an ion flux from an RF discharge plasma. Moreover, the shift and broadening depend only on the secondary electron-electron emission coefficient, the energy of the charged particles, and the aspect ratio.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Generation efficiency of single-photon current pulses in the Geiger mode of silicon avalanche photodiodes

Statistical fluctuations of the avalanche's multiplication efficiency were studied as applied to the single-photon (Geiger) mode of avalanche photodiodes. The distribution function of partial multiplication factors with an anomalously wide (of the order of the average) dispersion was obtained. Expressions for partial feedback factors were derived in terms of the average gain and the corresponding dependences on the diode's overvoltage were calculated. Final expressions for the photon-electric pulse's conversion were derived by averaging corresponding formulas over the coordinate of initiating photoelectron generation using the functions of optical photon absorption in silicon.

36 MATERIALS SCIENCE↗

Open-circuit voltage, fill factor, and efficiency of a CdS/CdTe solar cell

The dependences of the open-circuit voltage, fill factor, and efficiency of the thin-film CdS/CdTe solar cell on the resistivity {rho} and carrier lifetime {tau} in the absorbing CdTe layer were studied. In the common case in which the uncompensated acceptor concentration and the electron lifetime in the CdTe layer are within 10{sup 15}-10{sup 16} cm{sup -3} and 10{sup -10}-10{sup -9} s, the calculation results correspond to the achieved efficiency of the best thin-film CdS/CdTe solar cells. It was shown that, by decreasing {rho} and increasing {tau} in the absorbing CdTe layer, the open-circuit voltage, fill factor, and efficiency can be substantially increased, with their values approaching the theoretical limit for such devices.

36 MATERIALS SCIENCE↗

Optimization of self-acting step thrust bearings for load capacity and stiffness.

Linearized analysis of a finite-width rectangular step thrust bearing. Dimensionless load capacity and stiffness are expressed in terms of a Fourier cosine series. The dimensionless load capacity and stiffness were found to be a function of the dimensionless bearing number, the pad length-to-width ratio, the film thickness ratio, the step location parameter, and the feed groove parameter. The equations obtained in the analysis were verified. The assumptions imposed were substantiated by comparing the results with an existing exact solution for the infinite width bearing. A digital computer program was developed which determines optimal bearing configuration for maximum load capacity or stiffness. Simple design curves are presented. Results are shown for both compressible and incompressible lubrication. Through a parameter transformation the results are directly usable in designing optimal step sector thrust bearings.

Hamrock, B. J.↗

Tabulation and summary of thermodynamic effects data for developed cavitation on ogive-nosed bodies

Thermodynamic effects data for developed cavitation on zero and quarter caliber ogives in Freon 113 and water are tabulated and summarized. These data include temperature depression (delta T), flow coefficient (C sub Q), and various geometrical characteristics of the cavity. For the delta T tests, the free-stream temperature varied from 35 C to 95 C in Freon 113 and from 60 C to 125 C in water for a velocity range of 19.5 m/sec to 36.6 m/sec. Two correlations of the delta T data by the entrainment method are presented. These correlations involve different combinations of the Nusselt, Reynolds, Froude, Weber, and Peclet numbers and dimensionless cavity length.

Holl, J. W.↗

Heat transfer characteristics for jet array impingement with initial crossflow

Two-dimensional arrays of circular air jets impinging on a heat transfer surface parallel to the jet orifice plate are considered. The jet flow, after impingement, is constrained to exit in a single direction along the channel formed by the jet orifice plate and the heat transfer surface. In addition to the crossflow which originates from the jets following impingement, an initial crossflow is present which approaches the array through an upstream extension of the channel. The temperature of the initial crossflow air may differ from the jet air temperature. The configurations considered are intended to model the impingement cooled midchord region of gas turbine airfoils in cases where an initial crossflow is also present. Nusselt numbers and dimensionless adiabatic wall temperatures resolved to one streamwise jet hole spacing were experimentally determined for ratios of the initial crossflow rate to the total jet flow rate ranging from zero to unity. These are presented and discussed relative to the flow and geometric parameters.

Florschuetz, L. W.↗

Higher-order parabolic approximations for sound propagation in stratified moving media

Asymptotic solutions of order k-n are developed for the equations governing the propagation of sound through a stratified moving medium. Here k is a dimensionless wave number and n is the arbitrary order of the approximation. These approximations are an extension of geometric acoustics theory and provide corrections to that theory in the form of multiplicative functions which satisfy parabolic partial differential equations. These corrections account for the diffraction effects caused by variation of the field normal to the ray path and the interaction of these transverse variations with the variation of the field along the ray. The theory is illustrated by application to simple examples.

Mcaninch, G. L.↗

Higher order parabolic approximations of the reduced wave equation

Asymptotic solutions of order k to the nth are developed for the reduced wave equation. Here k is a dimensionless wave number and n is the arbitrary order of the approximation. These approximations are an extension of geometric acoustics theory, and provide corrections to that theory in the form of multiplicative functions which satisfy parabolic partial differential equations. These corrections account for the diffraction effects caused by variation of the field normal to the ray path and the interaction of these transverse variations with the variation of the field along the ray. The theory is applied to the example of radiation from a piston, and it is demonstrated that the higher order approximations are more accurate for decreasing values of k.

Mcaninch, G. L.↗

Hydrodynamic effects on cell growth in agitated microcarrier bioreactors

The net growth rate of bovine embryonic kidney cells in microcarrier bioreactor is the result of a variable death rate imposed on a cell culture trying to grow at a constant intrinsic growth rate. The death rate is a function of the agitation conditions in the system, and increases at higher agitation because of increasingly energetic interactions of the cell covered microcarriers with turbulent eddies in the fluid. At very low agitation rates bead-bead bridging becomes important; the large clumps formed by bridging can interact with larger eddies than single beads, leading to a higher death rate at low agitation. The growth and death rate were correlated with a dimensionless eddy number which compares eddy forces to the buoyant force on the bead.

Cherry, Robert S.↗

Granular instability in fluidized beds: A small-over-large instability

For different particle diameters arranged in a gas fluidized bed, a new gravitational instability is predicted. The first order stability analysis yields conditions for growth of the most unstable wavenumber both as a function of particle diameter and dimensionless Bond number. Gravity acts to distribute the greater fluid mass associated with smaller particles, while surface tension stabilizes the entire bed against accelerations. The phenomenon, called the 'Small-over-Large' (SL) instability, evolves somewhat akin to a Rayleigh-Taylor mechanism and in addition to fundamental interest, carries implications for predicting solute redistribution and gravitational alignments in particle beds and chemical separation columns.

Noever, David A.↗

Quantifying ataxia: ideal trajectory analysis--a technical note

We describe a quantitative method to assess repeated stair stepping stability. In both the mediolateral (ML) and anterioposterior (AP) directions, the trajectory of the subject's center of mass (COM) was compared to an ideal sinusoid. The two identified sinusoids were unique in each direction but coupled. Two dimensionless numbers-the mediolateral instability index (IML) and AP instability index (IAP)-were calculated using the COM trajectory and ideal sinusoids for each subject with larger index values resulting from less stable performance. The COM trajectories of nine nonimpaired controls and six patients diagnosed with unilateral or bilateral vestibular labyrinth hypofunction were analyzed. The average IML and IAP values of labyrinth disorder patients were respectively 127% and 119% greater than those of controls (p<0.014 and 0.006, respectively), indicating that the ideal trajectory analysis distinguishes persons with labyrinth disorder from those without. The COM trajectories also identify movement inefficiencies attributable to vestibulopathy.

Non-NASA Center↗

Effect of reduced gravity on the preferred walk-run transition speed

We investigated the effect of reduced gravity on the human walk-run gait transition speed and interpreted the results using an inverted-pendulum mechanical model. We simulated reduced gravity using an apparatus that applied a nearly constant upward force at the center of mass, and the subjects walked and ran on a motorized treadmill. In the inverted pendulum model for walking, gravity provides the centripetal force needed to keep the pendulum in contact with the ground. The ratio of the centripetal and gravitational forces (mv2/L)/(mg) reduces to the dimensionless Froude number (v2/gL). Applying this model to a walking human, m is body mass, v is forward velocity, L is leg length and g is gravity. In normal gravity, humans and other bipeds with different leg lengths all choose to switch from a walk to a run at different absolute speeds but at approximately the same Froude number (0.5). We found that, at lower levels of gravity, the walk-run transition occurred at progressively slower absolute speeds but at approximately the same Froude number. This supports the hypothesis that the walk-run transition is triggered by the dynamics of an inverted-pendulum system.

Non-NASA Center↗

Parametric Evaluation of Interstellar Exploration Mission Concepts

One persistent difficulty in evaluating the myriad advanced propulsion concepts proposed over the last 60 years is a true apples to apples comparison of the expected gain in performance. This analysis is complicated by numerous factors including, multiple missions of interest to the advanced propulsion community, the lack of a credible closed form solution to 'medium thrust' trajectories, and lack of detailed design data for most proposed concepts that lend credibility to engine performance estimates. This paper describes a process on how to make fair comparisons of different propulsion concepts for multiple missions over a wide range of performance values. The figure below illustrates this process. This paper describes in detail the process and outlines the status so far in compiling the required data. Parametric data for several missions are calculated and plotted against specific power-specific impulse scatter plots of expected propulsion system performance. The overlay between required performance as defined by the trajectory parametrics and expected performance as defined in the literature for major categories of propulsion systems clearly defines which propulsion systems are the most apt for a given mission. The application of the Buckingham Pi theorem to general parameters for interstellar exploration ( mission time, mass, specific impulse, specific power, distance, propulsion source energy/mass, etc.) yields a number of dimensionless variables. The relationships of these variables can then be explored before application to a particular mission. Like in the fields of fluid mechanics and heat transfer, the use of the Buckingham Pi theorem results in new variables to make apples to apples comparisons.

Adams, Robert B.↗

Do Sub-Mesoscales Inhibit Destruction of PV?

We present the first explicit form of the three components, advective, diabatic and frictional of the PV J fluxes contributed by sub-mesoscales SM. Of particular interest is the surface value of the vertical frictional PV flux which when positive, can induce destruction of PV by down-front winds. The 2005 numerical simulations of Thomas confirmed that this is indeed the case. However, since the 12 km numerical resolution could not account for sub-mesoscales SM (0.1-10) km, the effect of SM on the PV destruction process could not be quantified. The goal of this work is to provide an answer to that question asked in the title. The two SM parameterizations entering the problem, the vertical buoyancy flux and the momentum flux (Reynolds stresses), bring about a new feature, the dependence on the SM kinetic energy (represented by the dimensionless Rossby number Ro), that causes unexpected results. While in the absence of SM, there were no restrictions on where PV destruction could occur, in the presence of SM, the condition of a positive surface vertical frictional flux is restricted to SM regimes with very low Ro<1 and very high Ro>10. Since the SM kinetic energy is location dependent, so is PV destruction. The effect of SM seems to make PV destruction a much rarer occurrence than previously thought.

potential vorticity↗

Airfoil Table Modification for Improved Calculation of Ingenuity Rotor Performance

To better characterize the behavior of the Ingenuity helicopter, multiple test campaigns were conducted. These tests included the Engineering Design Model 1 (EDM1) tests and the Transonic Rotor Test (TRT), both of which assessed Ingenuity rotor performance at various conditions. Using a comprehensive rotorcraft analysis tool, CAMRAD II, test setups of the two different Ingenuity test campaigns were simulated. The EDM1 test used coaxial test stand which focused on varying collective at various feasible Martian atmospheric densities and the TRT test used a single rotor test stand which focused on varying RPM to assess performance at different blade tip Mach numbers. Initial CAMRAD II analyses yielded performance results which differed significantly from experimental results. To reconcile the experimental results and the CAMRAD II analyses, modifications were made to the input airfoil decks for CAMRAD II. After several iterations of modifications, a specific method of modification was found that more accurately predicted experimental behavior at all tested densities for the coaxial rotor. This same modification was less successful for the single rotor test results. There are a number of differences between coaxial and single rotor aerodynamics and between the two test stands (hub and control system); also, there is a small influence of RPM (mainly tip Mach number) on dimensionless performance. These differences may be causing the coaxial rotor modifications not being successful for the single rotor.

Airfoil↗

Aspect on vortex structure in noncentrosymmetric superconductors

Helicity of vortices is studied in a single order parameter Ginzburg-Landau model with n x B term. This unusual term changes the superconductor current, but does not change the quantum of magnetic flux, and the cross helicity of the probability density current in noncentrosymmetric superconductors. In this paper I compute the kinetic helicity and magnetic helicity of a superconductor and introduce a new helicity, i.e. a new topological invariant, to describe vortex phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dimensionless parameters for cloudy Rayleigh-Bénard convection: Supersaturation, Damköhler, and Nusselt numbers

In steady-state Rayleigh-Bénard convection, heat is transported by turbulent thermal convection from the bottom, hot surface to the top, cold surface, leading to a height-independent sensible heat flux. When water vapor is present and cloud formation occurs, there is also an additional latent heat flux. Heat transport in cloudy Rayleigh-Bénard convection depends on turbulent flow as well as the microphysical state of the clouds: specifically, whether substantial supersaturations exist and whether cloud liquid water is removed through sedimentation/precipitation. In this article we bridge between the Rayleigh-Bénard convection literature and the atmospheric literature. We express the governing equations for cloudy convection in dimensionless form, thereby explicitly identifying the governing parameters relevant to the cloudy case, including Schmidt, Damköhler, supersaturation, and sedimentation numbers. We further connect to the atmospheric literature by obtaining a Nusselt number (dimensionless heat flux) for a cloud-convection system, directly from the conservation equations for temperature and water vapor. This flux has the same form as that identified by Zhang et al. [L. Zhang, K. L. Chong, and K.-Q. Xia, J. Fluid Mech. 874, 1041 (2019)] for convection with water vapor, but is extended to the cloudy case. For equal thermal and water vapor diffusivities, the flux corresponds to the widely used atmospheric quantities equivalent temperature and moist static energy. Using large eddy simulation (LES) of an idealized cloudy Rayleigh-Bénard convection system with fixed boundary conditions, we find that the equivalent heat flux (Nusselt number) is only weakly dependent on the microphysical details of the system, such as liquid water mixing ratio and cloud droplet number concentration. Finally, from the results, we show the vertical profiles of sensible and latent heat fluxes depend on the liquid water content, whereas the equivalent heat flux remains a constant throughout the height of the chamber.

54 ENVIRONMENTAL SCIENCES↗