Search NASA⌕ Search

SEARCH · Search NASA

Results for “Level density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Enhanced thermoelectric power and electronic correlations in RuSe{sub 2}

We report the electronic structure, electric and thermal transport properties of Ru{sub 1−x}Ir{sub x}Se{sub 2} (x ≤ 0.2). RuSe{sub 2} is a semiconductor that crystallizes in a cubic pyrite unit cell. The Seebeck coefficient of RuSe{sub 2} exceeds −200 μV/K around 730 K. Ir substitution results in the suppression of the resistivity and the Seebeck coefficient, suggesting the removal of the peaks in density of states near the Fermi level. Ru{sub 0.8}Ir{sub 0.2}Se{sub 2} shows a semiconductor-metal crossover at about 30 K. The magnetic field restores the semiconducting behavior. Our results indicate the importance of the electronic correlations in enhanced thermoelectricity of RuSb{sub 2}.

36 MATERIALS SCIENCE↗

Photoionization and High Density Gas

We present results of calculations using the XSTAR version 2 computer code. This code is loosely based on the XSTAR v.1 code which has been available for public use for some time. However it represents an improvement and update in several major respects, including atomic data, code structure, user interface, and improved physical description of ionization/excitation. In particular, it now is applicable to high density situations in which significant excited atomic level populations are likely to occur. We describe the computational techniques and assumptions, and present sample runs with particular emphasis on high density situations.

Kallman, T.↗

Effects of composition, temperature, and magnetism on phonons in bcc Fe-V alloys

The phonon densities of states of body-centered-cubic Fe-V alloys across the full composition range were studied by inelastic neutron scattering, nuclear resonant inelastic x-ray scattering, and ab initio calculations. The average phonon energy followed the inverse of the electronic heat capacity and the inverse of the electronic density of states at the Fermi level, showing how the interatomic forces depend on electronic screening. These quantities, including phonon energy, changed rapidly near the composition of the paramagnetic-ferromagnetic transition. For Fe- and V-rich alloys, the thermal phonon softening deviated from quasiharmonic behavior but better agreement was found for intermediate compositions. The Fe partial phonon density of states has a distinctly different shape than V for alloys with less than 50 at. % Fe.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Structural and electronic properties of XSi{sub 2} (X = Cr, Mo, and W)

The structural and electronic properties of metal silicides XSi{sub 2} (X = Cr, Mo, and W), which crystallize in tetragonal structure, are investigated systematically using the first-principle density functional theory. The total energies are computed as a function of volume and fitted to the Birch equation of state. The ground-state properties such as equilibrium lattice constants a{sub 0} and c{sub 0}, bulk modulus B, its pressure derivative B, B′, and the density of states at the Fermi level, N(E{sub F}), are calculated and compared with other experimental and theoretical results, showing good agreement. The calculated band structure indicates that XSi{sub 2} compounds are semimetallic in nature. From the present study, we predict the structural and electronic properties of CrSi{sub 2} in the tetragonal phase and indicate that CrSi{sub 2} is energetically more stable than MoSi{sub 2} and WSi{sub 2}. Analyzing the bonding properties of the three metal silicides, we observe that WSi{sub 2} has a strong covalent bonding due to W 5d electrons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Positive-feedback photometric drift in the PDS

Digitizing flatfield images produces conditions in the Photometric Data System PDS which cause the measured density to drift by as much as .1 DN during a 10 minute interval. The drift occurs when the PDS, set up in equilibrium at fog level, subsequently scans a reasonably dense region for periods of longer than a few minutes. The drift is manifested primarily as a positive shift in density that is approximately the same for all densities. If the fog level is assumed to be in fact constant and is monitored during scans of flat fields, the PDS drift may be removed by subtracting the difference between the observed fog level and its assumed constant value for each pixel. This function is then smoothed and subtracted, as a function of scan line, from the measured density. The fog level is then adjusted to a standard value by adding a constant. The result is a flattened scan with PDS drift removed to the accuracy within which the fog level drift matches the drift at other levels.

Cornett, R. H.↗

Trends in runaway electron plateau partial recombination by massive H 2 or D 2 injection in DIII-D and JET and first extrapolations to ITER and SPARC

Abstract Experimental trends in thermal plasma partial recombination resulting from massive D 2 injection into high-Z (Ar) containing runaway electron (RE) plateaus in DIII-D and JET are studied for the purpose of achieving sufficiently low electron density ( n e ≈ 10 18 m − 3 ) to increase RE final loss MHD levels. In both DIII-D and JET, thermal electron density n e is found to drop by ∼100 × when the thermal plasma partially recombines, with a minimum at a vacuum vessel-averaged D 2 density in the range 10 20 − 10 21 m − 3 . RE effective resistivity also drops after partial recombination, indicating expulsion of the Ar content. The n e level after partial recombination is found to increase as RE current is increased. The amount of initial Ar in the RE plateau is not observed to have a strong effect on partial recombination. Partial recombination timescales of order 5 ms in DIII-D and 15 ms in JET are observed. These basic trends and timescales are matched with a 1D diffusion model, which is then used to extrapolate to ITER and SPARC tokamaks. Within the approximations of this model, it is predicted that ITER will be able to achieve sufficiently low n e values on time scales faster than expected RE plateau vertical drift timescales (of order 100 ms), provided sufficient D 2 or H 2 is injected. In SPARC, it is predicted that achieving significant n e recombination will be challenging, due to the very high RE current density. In both ITER and SPARC, it is predicted that achieving low n e will be easier with Ar as a background impurity (rather than Ne).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fabrication of one-dimensional photonic crystals by photoelectrochemical etching of silicon

The conditions of formation of deep periodic trenches by photoelectrochemical etching of n-Si (100) with linear seeds on the surface are analyzed. Criteria for the proper choice of the period of seed grooves and the etching current density in relation to the doping level of the substrate are formulated. Corrugation of walls is a characteristic feature of the obtained structures; this corrugation is caused by traces of merged macropores. Atomic-force microscopy is used to study roughness of the side-walls in relation to the etching conditions; the current density at which one can obtain the smoothest side-walls is determined. The roughness of the side walls in structures with periods of 7 and 9 {mu}m on Si with the resistivity of 15 {Omega} cm amounts to {approx}40 nm. It is shown that additional treatment of the structures in alkaline solutions can decrease the side-wall roughness by approximately a factor of 2.

36 MATERIALS SCIENCE↗

Flipperons for Improved Aerodynamic Performance

Lightweight, piezoelectrically actuated bending flight-control surfaces have shown promise as means of actively controlling airflows to improve the performances of transport airplanes. These bending flight-control surfaces are called flipperons because they look somewhat like small ailerons, but, unlike ailerons, are operated in an oscillatory mode reminiscent of the actions of biological flippers. The underlying concept of using flipperons and other flipperlike actuators to impart desired characteristics to flows is not new. Moreover, elements of flipperon-based active flow-control (AFC) systems for aircraft had been developed previously, but it was not until the development reported here that the elements have been integrated into a complete, controllable prototype AFC system for wind-tunnel testing to enable evaluation of the benefits of AFC for aircraft. The piezoelectric actuator materials chosen for use in the flipperons are single- crystal solid solutions of lead zinc niobate and lead titanate, denoted generically by the empirical formula (1-x)[Pb(Zn(1/3)Nb(2/3))O3]:x[PbTiO3] (where x<1) and popularly denoted by the abbreviation PZN-PT. These are relatively newly recognized piezoelectric materials that are capable of strain levels exceeding 1 percent and strain-energy densities 5 times greater than those of previously commercially available piezoelectric materials. Despite their high performance levels, (1-x)[Pb(Zn(1/3)Nb(2/3))O3]:x[PbTiO3] materials have found limited use until now because, relative to previously commercially available piezoelectric materials, they tend to be much more fragile.

Mabe, James H.↗

Cluster evolution as a probe of primordial density fluctuations

Although COBE's detection of large angle microwave background anisotropies fixes the amplitude of density fluctuations on length scales k exp -1 approximately = (300-6000) h(exp -1)Mpc, what is crucial for the level of large scale clustering is the amplitude of density fluctuations on scales (5-50) h(exp -1)Mpc. The level of dynamical clustering is usually parameterized by the size of the mass fluctuations in 8 h exp -1 Mpc spheres, sigma sub 8. For the cold dark matter model, COBE gives sigma sub 8 approximately = 1, while models with extra large scale power give sigma sub 8 approximately = 1/2. The most massive clusters of galaxies (greater than or approximately = 10 exp 15 solar mass) form from rare 'peak patches' found in the initial mass density distribution. Their abundance as a function of redshift is a sensitive probe of the wave number band k(exp -1) approx. (3-8) h(exp -1)Mpc, hence of sigma sub 8, and so cluster evolution can discriminate among models allowed by the COBE results. We use our Hierarchical Peaks Method, which accurately reproduces the results of P3M N-body simulations, to calculate the evolution of cluster x-ray flux counts, luminosity, and temperature functions as a function of sigma sub 8 for CDM models and those with more large scale power. We find that the EMSS and Edge et al. cluster samples support sigma sub 8 in the range from approx. 0.6-0.9, and that models with more large scale power (and hence flatter fluctuation spectra in the cluster regime) fit the x-ray bright end better.

Bond, J. Richard↗

Langmuir turbulence driven by beams in solar wind plasmas with long wavelength density fluctuations

The self-consistent evolution of Langmuir turbulence generated by electron beams in solar wind plasmas with density inhomogeneities is calculated by numerical simulations based on a 1D Hamiltonian model. It is shown, owing to numerical simulations performed with parameters relevant to type III solar bursts’ conditions at 1 AU, that the presence of long-wavelength random density fluctuations of sufficiently large average level crucially modifies the well-known process of beam interaction with Langmuir waves in homogeneous plasmas.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Open-cycle thermochemical energy storage for building space heating: Practical system configurations and effective energy density

Salt-hydrate thermochemical materials (TCM) are promising candidates for energy storage systems for building space heating due to their high theoretical energy density and the need for low regeneration temperature. However, water vapor is required to drive the hydration process of the TCM reactor, which poses a challenge during winter when water vapor is typically scarce. Using indoor air directly lowers the building's humidity to an unconformable level in practice, while the cold outdoor air contains limited moisture. Here we consider different integration strategies for open-cycle TCM reactors in buildings and develop a model to simulate their thermal performance across diverse buildings and climates, specifically for building space heating. The potential energy densities and the levelized cost of storage of the TCM reactor are evaluated in practical scenarios to demonstrate the load-shifting potential of TCM systems for heating applications. We use a strontium chloride (SrCl 2 )-based composite as the baseline and explore the impact of various reactor and material changes to the energy density and levelized cost of storage.

25 ENERGY STORAGE↗

Isotope shifts in beryllium-, boron-, carbon-, and nitrogen-like ions from relativistic configuration interaction calculations

Energy levels, normal and specific mass shift parameters as well as electronic densities at the nucleus are reported for numerous states along the beryllium, boron, carbon, and nitrogen isoelectronic sequences. Combined with nuclear data, these electronic parameters can be used to determine values of level and transition isotope shifts. The calculation of the electronic parameters is done using first-order perturbation theory with relativistic configuration interaction wavefunctions that account for valence, core–valence, and core–core correlation effects as zero-order functions. Results are compared with experimental and other theoretical values, when available.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Observation of Efficient Lower Hybrid Current Drive at High Density in Diverted Plasmas on the Alcator C-Mod Tokamak

Efficient lower hybrid current drive (LHCD) is demonstrated at densities up to ne≈1.5×10^20 m^-3 in diverted plasmas on the Alcator C-Mod tokamak by operating at increased plasma current - and therefore reduced Greenwald density fraction. This density exceeds the nominal "LH density limit" at ne≈1.0×10^20 m^-3 reported previously, above which an anomalous loss of current drive efficiency was observed. The recovery of current drive efficiency to a level consistent with engineering scalings is correlated with a reduction in density shoulders and turbulence levels in the far scrape-off layer. Concurrently, rf wave interaction with the edge and/or scrape-off-layer plasma is reduced, as indicated by a minimal broadening of the wave frequency spectrum measured at the plasma edge. These results have important implications for sustaining steady-state tokamak operation and indicate a pathway forward for implementing efficient LHCD in a reactor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Charge state transition levels of Ni in $β$-Ga 2 O 3 crystals from experiment and theory: An attractive candidate for compensation doping

Nickel-doped β-Ga 2 O 3 crystals were investigated by optical absorption and photoconductivity, revealing Ni-related deep levels. Here, the photoconductivity spectra were fitted using the phenomenological Kopylov and Pikhtin model to identify the energy of the zero-phonon transition (thermal ionization), Franck–Condon shift, and effective phonon energy. The resulting values are compared with the predicted ones by first-principle calculations based on the density functional theory (DFT). An acceptor level (0/-) of 1.9 eV and a donor level (+/0) of 1.1 eV above the valence band minimum are consistently determined for Ni Ga , which preferentially incorporates on the octahedrally coordinated Ga site. Temperature-dependent resistivity measurements yield a thermal activation energy of ~2.0 eV that agrees well with the determined Ni acceptor level. Conclusively, Ni is an eminently suitable candidate for compensation doping for producing semi-insulating β-Ga 2 O 3 substrates due to the position of the acceptor level (below and close to the mid-bandgap).

36 MATERIALS SCIENCE↗

A benchmark photoelectron spectroscopic and theoretical study of the electronic stability of [B12H12]2-

We report a joint benchmark study on the electronic stability of closo-dodecaborate [B12H12]2- employing negative ion photoelectron spectroscopy and high level electronic structure methods. The photoelectron spectra of [B12H12]2-, measured at 266, 193 and 157 nm, yield the Adiabatic and Vertical Detachment Energies (ADE and VDE) of this dianion at 0.93 ± 0.05 eV and 1.15 ± 0.05 eV, respectively, along with a ~ 3 eV Repulsive Coulomb Barrier (RCB) against electron detachment. Theoretical calculations at various levels of electronic structure theory confirm the high stability of this dianion. The ADE and VDE values calculated at the CCSD(T)/aug-cc-PVQZ level are 0.92, and 1.16 eV, in excellent agreement with the experimental benchmark values. The comparison between the experimental and the theoretical values obtained at different levels of theory indicate that the PBE0 density functional represents a cost-effective method of sufficient accuracy to describe the molecular properties of this dianion and associated compounds. The theoretical RCB was modelled after the electrostatic potential (ESP) and point charge method (PCM) along three different detachment pathways, viz. along the B-H bond, perpendicular to a B-B bond, and normal to a B-B-B triangle. It was found that detachment of the electron along the B-H bond is preferred, as this pathway is associated with RCBs between 2.3 eV (PCM) and 3.3 eV (ESP), values that bracket the experimental estimate of ~ 3 eV.

Apra, Edoardo↗

Structural, Spectroscopic, Antimicrobial Activity and DFT Studies on 4-Methyl-N-(4-methylphenylsulfonyl)-N-phenylbenzenesulfonamide

This study reports the structural characterization of a disulfonimide derivative, 4-methyl-N-(4-methylphenylsulfonyl)-N-phenylbenzenesulfonamide (MPBSA), using spectroscopic and quantum chemical methods. The molecule was characterized with FT-IR, {sup 1}H {sup 13}C NMR and UV-Vis spectroscopies. Quantum chemical calculations of molecular geometry, vibrational wavenumbers and gauge including atomic orbital (GIAO) {sup 1}H and {sup 13}C-NMR chemical shifts of the compound were carried out by using density functional method (DFT) at B3LYP/6−311++G(d,p) level of theory. Electronic absorption spectra of the compound have been computed using the time-dependent density functional theory (TD-DFT) method at the same level. A satisfactory consistency between the experimental and theoretical findings was obtained. The antimicrobial activity screening of the compound was performed on some bacteria and fungus species using microdilution method. The results showed that the title molecule have noteworthy antibacterial and antifungal activities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Antioxidant Depletion and Service Life Prediction for HDPE Geomembranes Exposed to Low-Level Radioactive Waste Leachate

Antioxidant depletion was evaluated in high-density polyethylene (HDPE) geomembrane (GM) coupons immersed in radioactive synthetic leachate (RSL) representative of leachate in low-level radioactive waste (LLW) disposal facilities operated by the U.S. Department of Energy’s environmental restoration programs. Depletion was assessed at four temperatures (25, 50, 70, and 90°C). Comparative tests were conducted with nonradioactive synthetic leachate (NSL) having the same chemistry as RSL, except radionuclides were excluded. Control tests were conducted with deionized (DI) water. One-sided exposure tests were also conducted with the HDPE GM in RSL at 70 and 90°C. Specimens were removed periodically and tested to determine antioxidant depletion, melt flow index (MFI), crystallinity, and stress crack resistance. Standard and high-pressure oxidative induction time (OIT) tests were conducted to measure antioxidant depletion. Antioxidant depletion rates in RSL were only slightly greater than those in NSL, indicating that radionuclides in the LLW leachate had only minor effect on antioxidant depletion. Antioxidant depletion in RSL and NSL occurred 1.1–1.9 times faster than in DI water. Antioxidant depletion in HDPE GMs exposed to RSL and NSL at 90°C was complete after 12 months. MFI decreased systematically after 15 months of immersion, which is indicative of crosslinking due to oxidation. Crystallinity also decreased slightly after 12 months, whereas stress crack resistance (SCR) showed no trend over the immersion period. Arrhenius modeling was used to extrapolate the laboratory data at elevated temperatures to a typical LLWliner at 15°C. Predicted time for antioxidant depletion for a 2-mm-thick HDPE GM in a composite liner in contact with LLW leachate is estimated to be 730 years. The total service life of HDPE GMs in contact with LLWleachate is estimated to be at least 1975 years.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Cobalt as a promising dopant for producing semi-insulating β-Ga 2 O 3 crystals: Charge state transition levels from experiment and theory

Optical absorption and photoconductivity measurements of Co-doped β-Ga 2 O 3 crystals reveal the photon energies of optically excited charge transfer between the Co related deep levels and the conduction or valence band. The corresponding photoionization cross sections are fitted by a phenomenological model considering electron–phonon coupling. The obtained fitting parameters: thermal ionization (zero-phonon transition) energy, Franck–Condon shift, and effective phonon energy are compared with corresponding values predicted by first principle calculations based on density functional theory. A (+/0) donor level ~0.85 eV above the valence band maximum and a (0/-) acceptor level ~2.1 eV below the conduction band minimum are consistently derived. Temperature-dependent electrical resistivity measurement at elevated temperatures (up to 1000 K) yields a thermal activation energy of 2.1 ± 0.1 eV, consistent with the position of the Co acceptor level. Furthermore, the results show that Co doping is promising for producing semi-insulating β-Ga 2 O 3 crystals.

Materials science↗