Search NASA⌕ Search

SEARCH · Search NASA

Results for “Loss function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Frame average optimization of cine-mode EPID images used for routine clinical in vivo patient dose verification of VMAT deliveries

Purpose: The in vivo 3D dose delivered to a patient during volumetric modulated arc therapy (VMAT) delivery can be calculated using electronic portal imaging device (EPID) images. These images must be acquired in cine-mode (i.e., “movie” mode) in order to capture the time-dependent delivery information. The angle subtended by each cine-mode EPID image during an arc can be changed via the frame averaging number selected within the image acquisition software. A large frame average number will decrease the EPID’s angular resolution and will result in a decrease in the accuracy of the dose information contained within each image. Alternatively, less EPID images acquired per delivery will decrease the overall 3D patient dose calculation time, which is appealing for large-scale clinical implementation. Therefore, the purpose of this study was to determine the optimal frame average value per EPID image, defined as the highest frame averaging that can be used without an appreciable loss in 3D dose reconstruction accuracy for VMAT treatments. Methods: Six different VMAT plans and six different SBRT-VMAT plans were delivered to an anthropomorphic phantom. Delivery was carried out on a Varian 2300ix model linear accelerator (Linac) equipped with an aS1000 EPID running at a frame acquisition rate of 7.5 Hz. An additional PC was set up at the Linac console area, equipped with specialized frame-grabber hardware and software packages allowing continuous acquisition of all EPID frames during delivery. Frames were averaged into “frame-averaged” EPID images using MATLAB. Each frame-averaged data set was used to calculate the in vivo dose to the patient and then compared to the single EPID frame in vivo dose calculation (the single frame calculation represents the highest possible angular resolution per EPID image). A mean percentage dose difference of low dose (<20% prescription dose) and high dose regions (>80% prescription dose) was calculated for each frame averaged scenario for each plan. The authors defined their unacceptable loss of accuracy as no more than a ±1% mean dose difference in the high dose region. Optimal frame average numbers were then determined as a function of the Linac’s average gantry speed and the dose per fraction. Results: The authors found that 9 and 11 frame averages were suitable for all VMAT and SBRT-VMAT treatments, respectively. This resulted in no more than a 1% loss to any of the dose region’s mean percentage difference when compared to the single frame reconstruction. The optimized number was dependent on the treatment’s dose per fraction and was determined to be as high as 14 for 12 Gy/fraction (fx), 15 for 8 Gy/fx, 11 for 6 Gy/fx, and 9 for 2 Gy/fx. Conclusions: The authors have determined an optimal EPID frame averaging number for multiple VMAT-type treatments. These are given as a function of the dose per fraction and average gantry speed. These optimized values are now used in the authors’ clinical, 3D, in vivo patient dosimetry program. This provides a reduction in calculation time while maintaining the authors’ required level of accuracy in the dose reconstruction.

61 RADIATION PROTECTION AND DOSIMETRY↗

Electronic Response of Aluminum-Bearing Minerals

Aluminum-bearing minerals show different hydrogen evolution and dissolution properties when subjected to radiation, but the complicated sequence of events following interaction with high-energy radiation is not understood. To gain insight into the possible mechanisms of hydrogen production in nanoparticulate minerals, we study the electronic response of three common aluminum-bearing minerals with varying hydrogen content: gibbsite (Al(OH)3), boehmite (AlOOH), and alumina (Al2O3) using electron energy loss spectroscopy, X-ray photoelectron spectroscopy, and first-principles electronic structure calculations. We find that the amount of hydrogen has only a small effect on the number and spectrum of photoexcitations in this class of materials. The highly anisotropic mobility of valence band holes, however, suggests that the differences in radiolytic behavior are related to differences in hole-mediated chemistry at the lateral faces of mineral particles.

Prange, Micah P.↗

Low irradiance losses of photovoltaic modules

Here, the efficiency of a photovoltaic cell/module changes, as the intensity of incident irradiance decreases, in a non linear way and these changes are referred to as low irradiance losses. In this study data from field experiments, developed and organized by the National Renewable Energy Laboratory, are used to evaluate the low irradiance losses for a variety of module technologies. The results demonstrate that the ratio of the normalized power divided by the normalized short circuit current provide a good measure of the module's low light efficiency losses after both the maximum power and the short circuit current are adjusted for temperature effects. The normalized efficiencies determined through the field data, spanning for several months, are in good agreement with those determined under controlled conditions in a solar simulator. An analytical relation for the normalized efficiency is proposed based on existing formulation for the fill factor. Despite the approximate nature of the fill factor relation, this approach produces reliable results. It will be shown that a normalized efficiency curve can be used to extract information on the series and shunt resistances of the PV module and that the shunt resistance as a function of solar irradiance can be studied. Alternately, this formulation can be used to study the low irradiance losses of a module when the internal resistances are known.

14 SOLAR ENERGY↗

Secondary electron emission and the bifurcation of the heat flux to the targets in fusion plasmas

The presence of secondary electron emission (SEE) from plasma facing components in fusion devices can result in a strong localization of the heat flux from plasma to the wall and subsequent wall erosion. Usually, the impact of the SEE is considered assuming the Maxwellian distribution of the electrons coming to the surface. As a result, the SEE coefficient only depends on the temperature of primary electrons. However, the tail of primary electron distribution function in the scrape off layer (SOL) of fusion devices can be far from Maxwellian due to preferential loss of fast electrons. Consequently, it is shown that the SEE coefficient will depend on the wall potential and multiple solutions can be possible corresponding to different regimes of plasma flow to the wall: with and without SEE effects. This effect can cause two-slope electron temperature profiles in the SOL, which are often seen in experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Surface participation and dielectric loss in superconducting qubits

We study the energy relaxation times (T{sub 1}) of superconducting transmon qubits in 3D cavities as a function of dielectric participation ratios of material surfaces. This surface participation ratio, representing the fraction of electric field energy stored in a dissipative surface layer, is computed by a two-step finite-element simulation and experimentally varied by qubit geometry. With a clean electromagnetic environment and suppressed non-equilibrium quasiparticle density, we find an approximately proportional relation between the transmon relaxation rates and surface participation ratios. These results suggest dielectric dissipation arising from material interfaces is the major limiting factor for the T{sub 1} of transmons in 3D circuit quantum electrodynamics architecture. Our analysis also supports the notion of spatial discreteness of surface dielectric dissipation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

SYP73 Is a Novel Membrane‐Associated Actin‐Binding Protein that Anchors the ER to the Actin Cytoskeleton in Arabidopsis

The endoplasmic reticulum (ER) is an essential organelle that spreads throughout the cytoplasm and undergoes extensive remodeling. In plants, the remodeling and motility of the ER rely mainly on actin and to a minor extent on microtubules. Although the actomyosin system has been suggested functional for ER streaming in plant cells, the mechanisms underlying stable interaction of the ER membrane with actin are unknown. We demonstrate that SYP73, a member of the plant Syp7 subgroup of SNARE proteins is a novel ER membrane‐associated actin‐binding protein. We show that overexpression of SYP73 causes a striking rearrangement of the ER over actin and that loss of SYP73 reduces ER streaming and affects overall ER network morphology and plant growth. A potential mechanism that regulates SYP73 functions has been investigated. Although conserved domain prediction tools did not detect any actin‐binding domain in SYP73, we identified a fragment that is mainly responsible for SYP73 actin binding. Furthermore, the role of SYP73 in regulating actin reorganization has also been examined. We propose a model for plant ER remodeling whereby the dynamic rearrangement and streaming of the ER network depend on the propelling action of myosin‐XI over actin coupled with a SYP73‐mediated bridging, which dynamically anchors the ER membrane with actin filaments. Support or Funding Information This work is support by the Chemical Sciences, Geosciences and Biosciences Division, Office of Basic Energy Sciences, Office of Science, US Department of Energy, the National Science Foundation, and MSU AgBioResearch. This abstract is from the Experimental Biology 2018 Meeting. There is no full text article associated with this abstract published in The FASEB Journal .

Cao, Pengfei↗

Symptomatic Outcomes in Relation to Tumor Expansion After Fractionated Stereotactic Radiation Therapy for Vestibular Schwannomas: Single-Institutional Long-Term Experience

Purpose: The effect of transient tumor expansion after conventionally fractionated stereotactic radiation therapy (SRT) on the symptomatic outcomes is not well-known. Methods and Materials: This study enrolled 201 consecutive patients who received SRT for vestibular schwannoma. A conventional fractionation schedule was applied in 194 patients (97%), and 142 (71%) received a total dose of 50 Gy. The median follow-up time was 72 months. Results: The maximum diameter was 9 mm or less in 13 patients, 10-19 mm in 79 patients, 20-29 mm in 87 patients, and 30 mm or greater in 22 patients. At presentation, tumor size of 20 mm or greater was significantly associated with loss of serviceable hearing and trigeminal neuropathy. After SRT, tumor expansion was observed in 42 patients (21%). By tumor size, tumor expansion was observed in 0%, 11.4%, 25.6%, and 50% of patients with tumors of 9 mm or less, 10-19 mm, 20-29 mm, and 30 mm or greater, respectively, in diameter. The tumor expansion was significantly associated with an increased risk of hydrocephalus requiring shunt placement (P=.004), loss of serviceable hearing (P=.0064), and worsening of facial (P<.0001) and trigeminal nerve (P<.0001) functions. Spontaneous tumor shrinkage was observed in 29 of those 42 patients, mostly within 2 years after the expansion, and the majority of the worsened symptoms except for hearing resolved once the tumor had shrunk. As a result, salvage surgical resection for symptomatic relief was required in only 5% of patients. Conclusions: Fractionated SRT could be safely applied even for medium- to large-sized ({>=}20 mm) tumors. However, greater knowledge of the risks and consequences, including transient symptomatic worsening, and the time span of expansion will be required for the follow-up of patients after SRT to avoid unnecessary surgical intervention.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Mesolytic cleavage of homobenzylic ethers for programmable end-of-life function in redoxmers

Irreparable chemical damage to redox-active monomers, oligomers, and polymers (i.e. redoxmers) limits the lifetime of energy storage devices (e.g. redox flow batteries) by causing electrode and membrane fouling, as well as irreversible capacity loss. To predictably restore device and materials performance, it is desirable to add programmed destruction capabilities into these damage-prone materials. Here, we report the use of triggerable retrograde reactions to achieve programmable end-of-life function in redoxmers. Retrograde reactions are intended to break up damaged redoxmer materials into more soluble small-molecule constituents to prevent irreparably fouling battery interfaces. We investigated the redox-triggered mesolytic cleavage of homobenzylic ethers (HBEs) for this purpose. Combining experimental methods with simulations, we probed the influence of ring substituents on the programmable bond-scission behavior of HBEs. Variation of para-substituents on the HBEs allowed us to modify the oxidation potential, degradation pathway, and electrochemical mechanisms of the generated products. Given its ideal oxidation potential, we selected the para-methoxy-based HBE as the cleavage scaffold and integrated it with dialkoxybenzene, TEMPO, viologen, and para-nitrobenzene redox centers for compatibility, bulk deconstruction, and electrode defouling tests. Upon applying a high oxidation potential, the redox-active pendant is cleaved from the backbone via HBE bonds; of the four redox centers tested, three of them remained fully redox active. Viologen-appended redox active polymers with HBE linkers were cleaved to fully separate the redox centers from the backbone. Polymer-filmed electrodes were partially restored following HBE oxidation defouling. Here these studies highlight the co-design of new materials functions for developing sustainable energy storage materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Core line spread function calibration of the X-ray Imaging and Spectroscopy Mission Resolve X-ray calorimeter spectrometer

The Resolve X-ray imaging spectrometer onboard the X-ray Imaging and Spectroscopy Mission consists of a 36 pixel array of high-resolution X-ray calorimeters each with ∼ 5 eV full-width-at-half-maximum (FWHM) spectral resolution in the 0.3 to 12 keV band. The response to monochromatic X-rays (line spread function, LSF) is composed of a narrow Gaussian core and weak extended components caused by energy loss during thermalization. We report on the characterization of the Gaussian core LSF in an extensive ground calibration campaign. We also discuss the characterization of on-orbit resolution, which shows slightly higher FWHM than that obtained on the ground.

Astronomy and AstroPhysics↗

On the averaging of cardiac diffusion tensor MRI data: the effect of distance function selection

Diffusion tensor magnetic resonance imaging (DT-MRI) allows a unique insight into the microstructure of highly-directional tissues. The selection of the most proper distance function for the space of diffusion tensors is crucial in enhancing the clinical application of this imaging modality. Both linear and nonlinear metrics have been proposed in the literature over the years. The debate on the most appropriate DT-MRI distance function is still ongoing. Here, in this paper, we presented a framework to compare the Euclidean, affine-invariant Riemannian and log-Euclidean metrics using actual high-resolution DT-MRI rat heart data. We employed temporal averaging at the diffusion tensor level of three consecutive and identically-acquired DT-MRI datasets from each of five rat hearts as a means to rectify the background noise-induced loss of myocyte directional regularity. This procedure is applied here for the first time in the context of tensor distance function selection. When compared with previous studies that used a different concrete application to juxtapose the various DT-MRI distance functions, this work is unique in that it combined the following: (i) metrics were judged by quantitative—rather than qualitative—criteria, (ii) the comparison tools were non-biased, (iii) a longitudinal comparison operation was used on a same-voxel basis. The statistical analyses of the comparison showed that the three DT-MRI distance functions tend to provide equivalent results. Hence, we came to the conclusion that the tensor manifold for cardiac DT-MRI studies is a curved space of almost zero curvature. The signal to noise ratio dependence of the operations was investigated through simulations. Finally, the 'swelling effect' occurrence following Euclidean averaging was found to be too unimportant to be worth consideration.

60 APPLIED LIFE SCIENCES↗

Cross sections and energy loss for lepton pair production in muon transport

We reevaluate electron-positron pair production from electromagnetic interactions of muons in transit through materials. Our approach, through the use of structure functions for inelastic and elastic scattering and including hadronic recoil, make the formalism useful for tau pair production at high energies. Our results for electron-positron pairs agree well with prior evaluations. Tau pair production, however, has significant contributions from inelastic scattering in addition to the usual coherent scattering with the nucleus and scattering with atomic electrons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the dynamic charge response of materials using low-energy, momentum-resolved electron energy-loss spectroscopy (M-EELS)

One of the most fundamental properties of an interacting electron system is its frequency- and wave-vector-dependent density response function, \chi({\bf q},\omega) . The imaginary part, \chi''({\bf q},\omega) , defines the fundamental bosonic charge excitations of the system, exhibiting peaks wherever collective modes are present. \chi χ quantifies the electronic compressibility of a material, its response to external fields, its ability to screen charge, and its tendency to form charge density waves. Unfortunately, there has never been a fully momentum-resolved means to measure \chi({\bf q},\omega) at the meV energy scale relevant to modern electronic materials. Here, we demonstrate a way to measure \chi χ with quantitative momentum resolution by applying alignment techniques from x-ray and neutron scattering to surface high-resolution electron energy-loss spectroscopy (HR-EELS). This approach, which we refer to here as “M-EELS”, allows direct measurement of \chi''({\bf q},\omega) with meV resolution while controlling the momentum with an accuracy better than a percent of a typical Brillouin zone. We apply this technique to finite-q excitations in the optimally-doped high temperature superconductor, Bi _2 2 Sr _2 2 CaCu _2 2 O _{8+x} 8 + x (Bi2212), which exhibits several phonons potentially relevant to dispersion anomalies observed in ARPES and STM experiments. Our study defines a path to studying the long-sought collective charge modes in quantum materials at the meV scale and with full momentum control.

36 MATERIALS SCIENCE↗

Behavior of lithium ions in the turbulent near-wall tokamak plasma under heating of ions and electrons of the main plasma

Turbulent dynamics of the near-wall tokamak plasma is simulated by numerically solving the nonlinear reduced Braginskii magnetohydrodynamic equations with allowance for a lithium ion admixture. The effects of turbulence and radiation of the admixture are analyzed in the framework of a self-consistent approach. The radial distributions of the radiative loss power and the density of Li{sup 0} atoms and Li{sup +1} ions are obtained as functions of the electron and ion temperatures of the main plasma in the near-wall layer. The results of numerical simulations show that supply of lithium ions into the low-temperature near-wall plasma substantially depends on whether the additional power is deposited into the electron or ion component of the main plasma. If the electron temperature in the layer increases (ECR heating), then the ion density drops. At the same time, an increase in the temperature of the main ions (ICR heating) leads to an increase in the density of Li{sup +1} ions. The results of numerical simulations are explained by the different influence of the electron and ion temperatures on the atomic processes governing the accumulation and loss of particles in the balance equations for neutral Li{sup 0} atoms and Li{sup +1} ions in the admixture. The radial profile of the electron temperature and the corresponding distribution of the radiative loss power for different densities of neutral Li{sup 0} atoms on the wall are obtained. The calculations show that the presence of Li{sup +1} ions affects turbulent transport of the main ions. In this case, the electron heat flux increases by 20–30% with increasing Li{sup +1} density, whereas the flux of the main ions drops by nearly the same amount. The radial profile of the turbulent flux of lithium ions is obtained. It is demonstrated that the appearance of the pinch effect is related to the positive density gradient of lithium ions across the calculation layer. For the parameters of the T-10 tokamak, the effect of radiative cooling of the near-wall plasma layer becomes appreciable when the near-wall density of neutral lithium atoms exceeds 7 × 10{sup 11} cm{sup −3}. In this case, the density of radiative loss power in the center of the layer is estimated to be about 500–600 kW/m{sup 3}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multiplexed in-gel microfluidic immunoassays: characterizing protein target loss during reprobing of benzophenone-modified hydrogels

From whole tissues to single-cell lysate, heterogeneous immunoassays are widely utilized for analysis of protein targets in complex biospecimens. Recently, benzophenone-functionalized hydrogel scaffolds have been used to immobilize target protein for immunoassay detection with fluorescent antibody probes. In benzophenone-functionalized hydrogels, multiplex target detection occurs via serial rounds of chemical stripping (incubation with sodium-dodecyl-sulfate (SDS) and β-mercaptoethanol at 50-60 °C for ≥1 h), followed by reprobing (interrogation with additional antibody probes). Although benzophenone facilitates covalent immobilization of proteins to the hydrogel, we observe 50% immunoassay signal loss of immobilized protein targets during stripping rounds. Here, we identify and characterize signal loss mechanisms during stripping and reprobing. We posit that loss of immobilized target is responsible for ≥50% of immunoassay signal loss, and that target loss is attributable to disruption of protein immobilization by denaturing detergents (SDS) and incubation at elevated temperatures. Furthermore, our study suggests that protein losses under non-denaturing conditions are more sensitive to protein structure (i.e., hydrodynamic radius), than to molecular mass (size). We formulate design guidance for multiplexed in-gel immunoassays, including that low-abundance proteins be immunoprobed first, even when targets are covalently immobilized to the gel. We also recommend careful scrutiny of the order of proteins targets detected via multiple immunoprobing cycles, based on the protein immobilization buffer composition.

59 BASIC BIOLOGICAL SCIENCES↗

Photon-hadron jet correlations in p + p and Au + Au collisions at root sNN = 200 GeV

We report the observation at the Relativistic Heavy Ion Collider of suppression of back-to-back correlations in the direct photon+jet channel in Au+Au relative to p+p collisions. Two-particle correlations of direct photon triggers with associated hadrons are obtained by statistical subtraction of the decay photon-hadron (?-h) background. The initial momentum of the away-side parton is tightly constrained, because the parton-photon pair exactly balance in momentum at leading order in perturbative quantum chromodynamics, making such correlations a powerful probe of the in-medium parton energy loss. The away-side nuclear suppression factor, IAA, in central Au+Au collisions, is 0.32 {+-} 0.12stat {+-} 0.09syst for hadrons of 3<pTh<5 in coincidence with photons of 5<pT?<15 GeV/c. The suppression is comparable to that observed for high-pT single hadrons and dihadrons. The direct photon associated yields in p+p collisions scale approximately with the momentum balance, zT=pTh/pT?, as expected for a measurement of the away-side parton fragmentation function. We compare to Au+Au collisions for which the momentum balance dependence of the nuclear modification should be sensitive to the path-length dependence of parton energy loss.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The path from litter to soil: Insights into soil C cycling from long-term input manipulation and high-resolution mass spectrometry

The pathways carbon (C) takes from plant litter to soil organic matter (SOM) underlies our understanding of how soil C stocks and microbial decomposition will respond to climate change, and determining whether natural soil C sinks can be enhanced to offset potential losses. Long-term ecosystem-scale litter manipulations and innovations in the molecular characterization of SOM provide a unique opportunity to explore these dynamics. We incubated soils from a 20-year litter-input experiment for 525 days and asked how litter quantity and source (i.e., roots versus aboveground litter) affected soil C cycling, including microbial function and the size and molecular composition of C pools defined by degree of mineral association. Input exclusion led to a 30% loss of soil C, attributable largely to the non-mineral-associated C fraction, and was accompanied by declines in soil C decomposition. The absence of roots led to a shift in the microbial catabolic profile, though there was no evidence that root litter was preferentially stabilized. Carbon did not accumulate under litter addition. However, direct examination of the finest mineral fraction with Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) revealed dramatic changes to the chemical composition of carbon. In particular, lipid content increased proportionally with input addition, and was subsequently mineralized during incubation, indicating that this apparently stable fraction is metabolically active. Moreover, non-metric dimensional scaling (NMS) showed that both litter treatments and incubation caused the molecular composition of SOM to diverge, and explained 79% of the variance in soil respiration. We conclude that the path from litter to soil is more complex than previously thought and mineral-associated SOM thought to be stable may be microbially available.

Reynolds, L L.↗

Charting the relationship between phase type-surface area-interactions between the constituent atoms and oxygen reduction activity of Pd–Cu nanocatalysts inside fuel cells by in operando high-energy X-ray diffraction

The activity and stability of nanoalloy catalysts for chemical reactions driving devices for clean energy conversion, in particular the oxygen reduction reaction (ORR), depend critically on optimizing major structural characteristics of the nanoalloys, such as the phase composition, surface area and bonding interactions between the constituent atoms, for the harsh operating conditions inside the devices. The effort requires good knowledge of the potential effect of changes in these characteristics on the catalytic functionality of the nanoalloys and, hence, on the devices' performance. We present the results from an in operando high-energy X-ray diffraction (HE-XRD) study on the concurrent changes in the structural characteristics and ORR activity of Pd–Cu nanoalloy catalysts as they function at the cathode of a proton exchange membrane fuel cell (PEMFC). We find that the as-prepared Pd–Cu nanoalloys with a chemical composition close to Pd1Cu1 are better ORR catalysts in comparison with Pd1Cu2, i.e. Pd-poor, and Pd3Cu1, i.e. Pd-rich, nanoalloys. Under operating conditions though, the former suffers a big loss in ORR activity appearing as a slow-mode oscillation in the current output of the PEMFC. Losses in ORR activity suffered by the latter also exhibit sudden drops and rises during the PEMFC operation. Through atomic pair distribution function (PDF) analysis of the in operando HE-XRD data, we identify the structural changes of Pd–Cu alloy NPs that are behind the peculiar decay of their ORR activity. The results uncover the instant link between the ever-adapting structural state of ORR nanocatalysts inside an operating PEMFC and the performance of the PEMFC. Besides, our results indicate that, among others, taking control over the intra-particle diffusion of metallic species in nanoalloy catalysts may improve the performance of PEMFCs significantly and, furthermore, in operando HE-XRD can be an effective tool to guide the effort. Finally, we argue that, though showing less optimal ORR activity in the as-prepared state, monophase Pd–Cu alloy catalysts with a composition ranging between Pd1Cu1 and Pd3Cu1 may deliver optimal performance inside operating PEMFCs.

Maswadeh, Yazan↗