Search NASA⌕ Search

SEARCH · Search NASA

Results for “Object Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

High Performance, Robust Control of Flexible Space Structures: MSFC Center Director's Discretionary Fund

Many spacecraft systems have ambitious objectives that place stringent requirements on control systems. Achievable performance is often limited because of difficulty of obtaining accurate models for flexible space structures. To achieve sufficiently high performance to accomplish mission objectives may require the ability to refine the control design model based on closed-loop test data and tune the controller based on the refined model. A control system design procedure is developed based on mixed H2/H(infinity) optimization to synthesize a set of controllers explicitly trading between nominal performance and robust stability. A homotopy algorithm is presented which generates a trajectory of gains that may be implemented to determine maximum achievable performance for a given model error bound. Examples show that a better balance between robustness and performance is obtained using the mixed H2/H(infinity) design method than either H2 or mu-synthesis control design. A second contribution is a new procedure for closed-loop system identification which refines parameters of a control design model in a canonical realization. Examples demonstrate convergence of the parameter estimation and improved performance realized by using the refined model for controller redesign. These developments result in an effective mechanism for achieving high-performance control of flexible space structures.

Whorton, M. S.↗

The Effect of Hindlimb Suspension on the Reproductive System of Young Male Rats

Colonization of space requires the ability to reproduce in reduced gravity. Following spaceflight, astronauts and male rats exhibit decreased testosterone (T). This has important implications as T effects the testes and accessory sex glands. To our knowledge no studies have examined the effects of spaceflight on accessory sex glands. Due to the rarity of spaceflight opportunities, ground models have been used to simulate weightlessness. The objective of this study was to determine the effect of long-term (21 d) weightlessness on the reproductive system of male rats. Weightlessness was simulated using the Morey-Holton hindlimb suspension (HLS) model. Age 10 week old, male Sprague-Dawley rats weighing (209.0 +9.7g) were randomly assigned (n=10/group) to either HLS or ambulatory control. In HLS rats, testes mass was 33% lower (p<0.05) than ambulatory controls. However, HLS had no effect on prostate (0.65 +0.09g vs 0.69 +0.12g) or seminal vesicles (1.01 +0.35g vs 0.75 +0.22g) weights compared to controls. The absence of effects on plasma T in this study contrasts previous reports of reduced plasma T in HLS male rats. This discrepancy may have been due to the age of animal and timing of sampling. T levels vary dramatically during testes development as well as within normal diurnal cycles. In young HLS rats, testes weight was reduced but not plasma T. Subsequently there was no effect on accessory sex glands. However, this may not be the case in older rats. More studies using standardized methods are needed to gain a better understanding of male reproduction function and capability in weightlessness. Funding provided by NASA.

Tou, Janet↗

What Happened, and Why: Toward an Understanding of Human Error Based on Automated Analyses of Incident Reports

The objective of the Aviation System Monitoring and Modeling project of NASA's Aviation Safety and Security Program was to develop technologies to enable proactive management of safety risk, which entails identifying the precursor events and conditions that foreshadow most accidents. Information about what happened can be extracted from quantitative data sources, but the experiential account of the incident reporter is the best available source of information about why an incident happened. In Volume I, the concept of the Scenario was introduced as a pragmatic guide for identifying similarities of what happened based on the objective parameters that define the Context and the Outcome of a Scenario. In this Volume II, that study continues into the analyses of the free narratives to gain understanding as to why the incident occurred from the reporter s perspective. While this is just the first experiment, the results of our approach are encouraging and indicate that it will be possible to design an automated analysis process guided by the structure of the Scenario that can achieve the level of consistency and reliability of human analysis of narrative reports.

Ferryman, Thomas A.↗

Studies of tropical ocean dynamics using the TOPEX/Poseidon altimeter-derived sea surface topography

Our primary objective is to carry out studies of tropical ocean dynamics using the TOPEX/POSEIDON altimeter-derived sea level data set in conjunction with the large in situ sea level data set available at the Tropical Ocean Global Atmosphere (TOGA) Sea Level Center. These studies will be supported by an interaction with numerical model simulations of tropical ocean variability. Five specific objectives can be identified: (1) research products; (2) short-term climate variations; (3) tropical-current variations; (4) synoptic-scale variability; and (5) model simulations.

Lukas, Roger↗

Experimental validation study of an analytical model of discrete frequency sound propagation in closed-test-section wind tunnels

The principal objective is to assess the adequacy of linear acoustic theory with an impedence wall boundary condition to model the detailed sound field of an acoustic source in a duct. Measurements and calculations are compared of a simple acoustic source in a rectangular concrete duct lined with foam on the walls and anechoic end terminations. Measurement of acoustic pressure for twelve wave numbers provides variation in frequency and absorption characteristics of the duct walls. Close to the source, where the interference of wall reflections is minimal, correlation is very good. Away from the source, correlation degrades, especially for the lower frequencies. Sensitivity studies show little effect on the predicted results for changes in impedance boundary condition values, source location, measurement location, temperature, and source model for variations spanning the expected measurement error.

Mosher, Marianne↗

Interactive graphics for geometry modeling

An interactive vector capability to create geometry and a raster color shaded rendering capability to sample and verify interim geometric design steps through color snapshots is described. The development is outlined of the underlying methodology which facilitates computer aided engineering and design. At present, raster systems cannot match the interactivity and line-drawing capability of refresh vector systems. Consequently, an intermediate step in mechanical design is used to create objects interactively on the vector display and then scan convert the wireframe model to render it as a color shaded object on a raster display. Several algorithms are presented for rendering such objects. Superquadric solid primitive extend the class of primitives normally used in solid modelers.

Wozny, M. J.↗

Distribution of dynamic loads for multiple cooperating robot manipulators

For the situation of multiple cooperating manipulators handling a single object, a formulation is presented which allows load distribution of the combined system to be made while taking manipulator dynamics into account. First, object dynamics are used to transform the motion task. An integrated procedure for modeling arm dynamics are used to transform the motion task. An integrated procedure for modeling arm dynamics is detailed. Then, a method is introduced which transforms the object load to the joint level. At this level, various methods of load distribution that allow subtask performance are proposed. These methods allow desired object motion while selecting loads desirable to alleviate manipulator dynamic loads.

Walker, Ian D.↗

The Lyman edge test of the quasar emission mechanism

The Lyman edge region in the spectra of 11 high-redshift quasars is studied using data designed to detect broadened Lyman edge absorption predicted by thermal models of the 'big blue bump' continuum component, especially thin accretion disks. Three objects have broadened, partial edges near the systemic redshifts, as expected for thermal models. In two cases, however, narrow Lyamn lines with the edge absorption, ruling out the disk interpretation. Thus, the data are negative for thermal models, at least for opaque thin accretion disks.

Antonucci, R. R. J.↗

Regenerative life support system research

Sections on modeling, experimental activities during the grant period, and topics under consideration for the future are contained. The sessions contain discussions of: four concurrent modeling approaches that were being integrated near the end of the period (knowledge-based modeling support infrastructure and data base management, object-oriented steady state simulations for three concepts, steady state mass-balance engineering tradeoff studies, and object-oriented time-step, quasidynamic simulations of generic concepts); interdisciplinary research activities, beginning with a discussion of RECON lab development and use, and followed with discussions of waste processing research, algae studies and subsystem modeling, low pressure growth testing of plants, subsystem modeling of plants, control of plant growth using lighting and CO2 supply as variables, search for and development of lunar soil simulants, preliminary design parameters for a lunar base life support system, and research considerations for food processing in space; and appendix materials, including a discussion of the CELSS Conference, detailed analytical equations for mass-balance modeling, plant modeling equations, and parametric data on existing life support systems for use in modeling.

Source record↗

Dynamical study of the Hilda asteroids. I - Resonant orbital motion of the PLS objects from the Palomar-Leiden Survey

Schubart's (1968) model of a planar elliptic restricted three-body problem is used to study the orbital motion of the Hilda asteroids from the Palomar-Leiden Survey. The 3:2 resonant coupling to Jupiter of some of these small asteroids is found to be stable. However, some of the small asteroids with absolute magnitude greater than 15 have large amplitude of variation in their orbital elements in one libration period. Since the lifetime scales against catastrophic collision of the Hilda asteroids are estimated to be several times larger than those of the main-belt objects, a significant portion of these resonant asteroids could be the original members of the Hilda group. From this point of view, it is suggested that such 'size dependence' of resonant orbital motions might be the result of cosmogonic effects of jet-stream accretion.

Ip, W.-H.↗

(abstract) Atmospheric Transmission Model Through Autonomous Visibility Measurement

Performance of deep space optical communications is impacted by atmospheric outages. By monitoring known stellar objects with calibrated telescopes, atmospheric attenuation statistics can be recorded. This paper describes a program to develop an atmospheric transmission model for optical communications by making automous visibility measurements of known stellar objects from three locations in the southwestern US. The data will be correlated and infused with weather data to establish the atmospheric transmission model. This model will be sent in link margin analysis for optical communications channels. The statistics will be updated on a quarterly basis and calibrated using data taken over a long period of time. This calibration is expected to allow extrapolation to other ground-based locations through use of global weather databases.

attenuation model↗

Satellite Altimetry, Ocean Circulation, and Data Assimilation

Ocean circulation is a critical factor in determining the Earth's climate. Satellite altimetry has been proven a powerful technique for measuring the height of the sea surface for the study of global ocean circulation dynamics. A major objective of my research is to investigate the utility of altimeter data for ocean circulation studies. The 6 years' data record of TOPEX/POSEIDON have been analyzed to study the spatial and temporal characteristics of large-scale ocean variability. A major result obtained in 1998 is the discovery of large-scale oscillations in sea level with a period of 25 days in the Argentine Basin of the South Atlantic Ocean (see diagram). They exhibit a dipole pattern with counterclockwise rotational propagation around the Zapiola Rise (centered at 45S and 317E), a small seamount in the abyssal plain of the basin. The peak-to-trough amplitude is about 10 cm over a distance of 500-1000 km. The amplitude of these oscillations has large seasonal-to-interannual variations. The period and rotational characteristics of these oscillations are remarkably similar to the observations made by two current meters deployed near the ocean bottom in the region. What TOPEX/POSEIDON has detected apparently are manifestations of the movement of the entire water column (barotropic motion). The resultant transport variation is estimated to be about 50 x 10(exp 6) cubic M/S, which is about 50% of the total water transport in the region. Preliminary calculations suggest that these oscillations are topographically trapped waves. A numerical model of the South Atlantic is used to investigate the nature of and causes for these waves. A very important property of sea surface height is that it is directly related to the surface geostrophic velocity, which is related to deep ocean circulation through the density field. Therefore altimetry observations are not only useful for determining the surface circulation but also for revealing information about the deep ocean. Another objective of my research is to investigate the extent of information one can infer about the deep ocean from altimetric observations. The approach is data assimilation by ocean models. The objective is to develop a modeling/data assimilation system that will produce estimates of the 3-dimensional state of the ocean for the entire duration of the TOPEX/POSEIDON Mission.

Fu, Lee-Lueng↗

Modeling and Analysis of Wrinkled Membranes: An Overview

Thin-film membranes are basic elements of a variety of space inflatable/deployable structures. Wrinkling degrades the performance and reliability of these membrane structures, and hence has been a topic of continued interest. Wrinkling analysis of membranes for general geometry and arbitrary boundary conditions is quite challenging. The objective of this presentation is two-fold. Firstly, the existing models of wrinkled membranes and related numerical solution methods are reviewed. The important issues to be discussed are the capability of a membrane model to characterize taut, wrinkled and slack states of membranes in a consistent and physically reasonable manner; the ability of a wrinkling analysis method to predict the formation and growth of wrinkled regions, and to determine out-of-plane deformation and wrinkled waves; the convergence of a numerical solution method for wrinkling analysis; and the compatibility of a wrinkling analysis with general-purpose finite element codes. According to this review, several opening issues in modeling and analysis of wrinkled membranes that are to be addressed in future research are summarized, The second objective of this presentation is to discuss a newly developed membrane model of two viable parameters (2-VP model) and associated parametric finite element method (PFEM) for wrinkling analysis are introduced. The innovations and advantages of the proposed membrane model and PFEM-based wrinkling analysis are: (1) Via a unified stress-strain relation; the 2-VP model treat the taut, wrinkled, and slack states of membranes consistently; (2) The PFEM-based wrinkling analysis has guaranteed convergence; (3) The 2-VP model along with PFEM is capable of predicting membrane out-of-plane deformations; and (4) The PFEM can be integrated into any existing finite element code. Preliminary numerical examples are also included in this presentation to demonstrate the 2-VP model and PFEM-based wrinkling analysis approach.

Yang, B.↗

Description of a tilt wing mathematical model for piloted simulation

A tilt-wing mathematical model that was used in a piloted six-deg-of-freedom flight simulation application is presented. Two types of control systems developed for the model - a conventional programmed-flap wing-tilt control system and a geared-flap wing-tilt control system - are discussed. The objective of this effort was to develop the capability to study tilt-wing aircraft. Experienced tilt-wing pilots subjectively evaluated the model using programmed-flap control to assess the quality of the simulation. The objective was met and the model was then applied to study geared-flap control to investigate the possibility of eliminating the need for auxiliary pitch control devices. This was performed in the moving-base simulation environment, and the vehicle responses with programmed-flap and geared-flap control were compared.

Totah, Joseph J.↗

Control of the forebody vortex orientation by asymmetric air injection. Part A: Application to enhance departure/spin recovery of fighter aircraft and Part B: Details of the flow structure

A concept developed to provide powerful directional control effectiveness for a fighter aircraft at high angles of attack is described. The concept utilizes the energy concentrated in the strong forebody vortices (which form on slender bodies of high relative incidence) by controlling the lateral orientation of the vortices with respect to the body. The objective was to utilize the side force associated with asymmetric vortices, in a controlled manner, to enhance the ability of the fighter to recover from a departure from controlled flight. The results from water tunnel and wind tunnel experiments show that a small amount of tangential blowing along the forebody near the apex can effectively alter the forebody vortex system and generate large restoring yawing moments. Six degree of freedom digital simulation results show that this concept can substantially enhance recovery characteristics of fighter aircraft with long, slender forebodies. Also, the results of experiments which were conducted on a cone model are discussed where the principal test objective was to develop an understanding of the fluid mechanics involved in the process of vortex control. Knowledge gained in these more generic tests should allow the concept to be applied to a wider range of configurations.

Skow, A. M.↗

Planetary nebular carbon-to-oxygen ratios, morphology and evolution

Observations secured with the image tube scanner (ITS) at the Shane 3 m telescope were compared with the data obtained with the International Ultraviolet Explorer (IUE). The spectra of this nitrogen-rich object was analyzed with the aid of the theoretical nubular models. The abundances of Ne, S, Cl, and Ar appear to be essentially solar to within a factor two. Two remarkable high-excitation planetary nebulae are IC 1297 and M1-1. The spectra of these objects are analyzed with the aid of the theoretical nebular models as far as possible. The models permit one to estimate the fraction of unobservable ions of abundant elements.

Aller, Lawrence H.↗

Progress in Flaps Down Flight Reynolds Number Testing Techniques at the NTF

A series of NASA/Boeing cooperative low speed wind tunnel tests was conducted in the National Transonic Facility (NTF) between 2003 and 2004 using a semi-span high lift model representative of the 777-200 aircraft. The objective of this work was to develop the capability to acquire high quality, low speed (flaps down) wind tunnel data at up to flight Reynolds numbers in a facility originally optimized for high speed full span models. In the course of testing, a number of facility and procedural improvements were identified and implemented. The impact of these improvements on key testing metrics data quality, productivity, and so forth - was significant, and is discussed here, together with the relevance of these metrics as applied to cryogenic wind tunnel testing in general. Details of the improvements at the NTF are discussed in AIAA-2006-0508 (Recent Improvements in Semi-span Testing at the National Transonic Facility). The development work at the NTF culminated with validation testing of a 787-8 semi-span model at full flight Reynolds number in the first quarter of 2006.

Payne, Frank↗

Probing ExoMiner for Effectiveness against False Alarms in Kepler Data

We present a study on the effectiveness of ExoMiner against False Alarms in Kepler data. ExoMiner is a deep learning model that was used to validate around 370 Kepler Objects of Interest. We follow the analysis conducted in Coughlin et al (2017) “DR25 Robovetter Completeness and Effectiveness” for Robovetter, a rule-based model used to vet TCEs for this data release and automatically generate the Q1-Q17 DR 25 KOI Table. The ExoMiner model is trained on observed transit data from Kepler Q1-Q17 DR25 and evaluated on Kepler inverted and scrambled data. The results provide a more comprehensive insight into the capacities and limitations of ExoMiner, especially the vetting of not-transit-like signals and, more generally, the use of deep learning models to model transit photometry data for vetting and validation purposes.

exoplanet↗