Search NASA⌕ Search

SEARCH · Search NASA

Results for “Predictive analytics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Slugging Flow of Water Draining from the Bottom of a Non-Vented Container

Experiments were run to observe the behavior of water exiting through an orifice at the bottom of an non-vented container. Initially, the container is nearly full of water with a small air space on top. Once the orifice was uncovered, the slugging rate and the drain rate of the water leaving the container were measured. Upon initially opening the orifice, water drains out until the air pressure above the water reduces enough that the air pressure drop from inside to outside of the container supports the water column and the water stops flowing. Air then enters the container through the orifice forming a bubble, which grows until it detaches and bubbles through the water to reach the air space. Once the bubble enters, this added air increases the pressure in the air space enough to allow the water to start flowing out again. This cycle of flow out, flow stoppage, air inflow, and bubble breakoff continues over and over until the hole is closed or the container empties. This is referred to as the “slugging cycle.” A mechanism is proposed to describe the slugging cycle which is modeled analytically. This paper presents the description of the experiments, data obtained, the mechanistic model, and comparison of the model to the experimental data. The model predicts outflow rates close to experimental values. Flow rates from non-vented containers are more than 10 to 20 less than vented containers. The bubbles which must enter the container periodically to increase the internal air pressure stop the water flow momentarily so are responsible for this large decrease in flow rate. Swirl induced in the non-vented container causes the flow rates to increase by a factor of two. The flow rate out of a non-vented container is independent of water height which is in direct contrast to a vented container where the flow rate is proportional to the square root of the water height. The constant rate is due to the container pressure. The higher the water level, the lower the air pressure is in the container. This analytical model requires input of the bubble size. The volume recommended is the volume of a cylinder with the base of the orifice area and length of 3.3 cm. Slugging rate varies only a small amount falling in the range to 2 to 4 cycles/sec. Preliminary work with other containers indicates larger containers, larger orifices and nozzle exit shapes produce higher specific flow rates. The standard multiphase flow equations could not be used to analyze this situation because the two phases are not interpenetrating. Instead one phase must fully stop before the other can flow. Interpenetrating phases allow can pass one another each affecting the other with friction and virtual mass. An interesting observation: The negative air pressure in the container is observable. It equals the water height.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Multi-dimensional collective effects in high-current relativistic beams relevant to High Density Laboratory Plasmas

In summary, an analytical model describing the self-pinching of a relativistic charge-neutralized electron beam undergoing the collisionless Weibel instability in an overdense plasma has been developed. The model accurately predicts the final temperature and size of the self-focused filament. It is found that the final temperature is primarily defined by the total beam’s current, while the filament’s radius is shown to be smaller than the collisionless skin depth in the plasma and primarily determined by the beam’s initial size. The model also accurately predicts the repartitioning ratio of the initial energy of the beam’s forward motion into the magnetic field energy and the kinetic energy of the surrounding plasma. The density profile of the final filament is shown to be a superposition of the standard Bennett pinch profile and a wide halo surrounding the pinch, which contains a significant fraction of the beam’s electrons. PIC simulations confirm the key assumption of the analytic theory: the collisionless merger of multiple current filaments in the course of the Weibel Instability provides the mechanism for Maxwellization of the beam’s distribution function. Deviations from the Maxwell-Boltzmann distribution are explained by incomplete thermalization of the deeply trapped and halo electrons. It is conjectured that the simple expression derived here can be used for understanding collsionless shock acceleration and magnetic field amplification in astrophysical plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Supplementary Material for ORNL_AISD-Ex

This dataset provides supplementary material for the previously published dataset ORNL_AISD-Ex (1), which is available at the following website: https://www.osti.gov/biblio/1907919 The dates comprises one compressed folder called ornl_aisd_ex.zip. The compressed folder ornl_aisd_ex.zip contains 1,000 CSV files, each of them titled ornl_aisd_ex_ID.csv, where ID is a number that ranges between 1 and 1,000. The information contained in ornl_aisd_ex_ID.csv corresponds to the information of the molecules compresses inside the ornl_aisd_ex_ID.tar.gz of the dataset ORNL_AISD-Ex. Each row in each .CSV file is associated with a molecule, and the columns contain the following information: 1) molecules ID 2) SMILES string representation 3) DFTB-PE (eV): formation energy 4) first 50 electronic excitation modes 5) oscillators strengths of the first 50 electronic excitation modes The compression of this information into CSV files will allow a more agile extraction and management of information to the users that do not have access to large scale HPC platforms. REFERENCES (1) Lupo Pasini, Massimiliano, Mehta, Kshitij, Yoo, Pilsun, and Irle, Stephan. ORNL_AISD-Ex: Quantum chemical prediction of UV/Vis absorption spectra for over 10 million organic molecules. United States: N. p., 2023. Web. doi:10.13139/OLCF/1907919.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

COVID19 Disease Map, a computational knowledge repository of virus–host interaction mechanisms

We need to effectively combine the knowledge from surging literature with complex datasets to propose mechanistic models of SARS-CoV-2 infection, improving data interpretation and predicting key targets of intervention. Here, we describe a large-scale community effort to build an open access, interoperable and computable repository of COVID-19 molecular mechanisms. The COVID-19 Disease Map (C19DMap) is a graphical, interactive representation of disease-relevant molecular mechanisms linking many knowledge sources. Notably, it is a computational resource for graph-based analyses and disease modelling. To this end, we established a framework of tools, platforms and guidelines necessary for a multifaceted community of biocurators, domain experts, bioinformaticians and computational biologists. The diagrams of the C19DMap, curated from the literature, are integrated with relevant interaction and text mining databases. We demonstrate the application of network analysis and modelling approaches by concrete examples to highlight new testable hypotheses. This framework helps to find signatures of SARS-CoV-2 predisposition, treatment response or prioritisation of drug candidates. Such an approach may help deal with new waves of COVID-19 or similar pandemics in the long-term perspective.

59 BASIC BIOLOGICAL SCIENCES↗

New tolerance factor to predict the stability of perovskite oxides and halides

Predicting the stability of the perovskite structure remains a long-standing challenge for the discovery of new functional materials for many applications including photovoltaics and electrocatalysts. We developed an accurate, physically interpretable, and one-dimensional tolerance factor, τ, that correctly predicts 92% of compounds as perovskite or nonperovskite for an experimental dataset of 576 ABX 3 materials (X = O 2– , F – , Cl – , Br – , I – ) using a novel data analytics approach based on SISSO (sure independence screening and sparsifying operator). τ is shown to generalize outside the training set for 1034 experimentally realized single and double perovskites (91% accuracy) and is applied to identify 23,314 new double perovskites ( A 2 BB'X 6 ) ranked by their probability of being stable as perovskite. Furthermore, this work guides experimentalists and theorists toward which perovskites are most likely to be successfully synthesized and demonstrates an approach to descriptor identification that can be extended to arbitrary applications beyond perovskite stability predictions.

36 MATERIALS SCIENCE↗

Superresolved Motions of Single Molecular Catalysts during Polymerization Show Wide Distributions

The motion of single molecular ruthenium catalysts during and after single turnover events of ring-opening metathesis polymerization is imaged through single-molecule superresolution tracking with a positional accuracy of ±32 nm. This tracking is achieved through the real-time incorporation of spectrally tagged monomer units into active polymer chain ends during living polymerization; thus, by design, only active-catalyst motion is detected and imaged, without convolution by inactive catalysts. The catalysts show diverse individualistic diffusive behaviors with respect to time that persist for up to 20 s. Catalysts occupy three mobility populations: quasi-stationary (23%), intermediate (53%, 65 nm), and large (24%, 145 nm) step sizes. Differences in catalyst mobility populations also exist between individual aggregates (p < 0.001). Such differential motion indicates widely different local catalyst microenvironments during the catalytic turnover. These mobility differences are uniquely observable through single-catalyst microscopy and are not measurable through traditional ensemble analytical techniques for characterizing the behavior of molecular catalysts, such as nuclear magnetic resonance spectroscopy. The measured distributions of active molecular catalyst motions would not be readily predictable through modeling or first-principles, and the range likely impacts individual catalyst turnover rate and selectivity. This range plausibly contributes to property distributions observable in bulk polymers, such as molecular weight polydispersity (e.g., 1.9 in this system), leading to a revised understanding of the mechanistic, microscale origins of macroscale polymer properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Proposed Analytical Methods for Determining Filter Media Properties

High Efficiency Particulate Air (HEPA) filters, commonly used in nuclear filtration applications, are an integral part of the waste management processes in nuclear plants. HEPA filters are 99.97% efficient filtration devices characterized by their high resistance to air flow, or pressure drop. From theoretical models, the initial pressure drop across a clean filter is proven to be a function of the filter media fiber diameters and porosity of the media. These filter properties are relatively difficult to obtain with traditional manual methods; therefore, there is a need to develop analytical methods to find the fiber diameter and porosity to determine the pressure drop. Typically, these values can be found by substituting a calculated representative value based upon measured values, such as equivalent fiber diameter based upon a clean pressure drop. However, these values may also be directly recorded and measured by incorporating Scanning Electron Microscope (SEM) image analysis and other measurement methods to analyze the filter media and determine its physical properties without the need for media testing. DiameterJ, an open source Java plug-in, used with ImageJ, can process images of filter media taken by an SEM to find statistical data such as mean fiber diameter and porosity. To produce the raw data, SEM images of two filter media type samples are taken and segmented in DiameterJ using the traditional and statistical region merging segmentation algorithms. Manual segmentation is necessary after the initial segmentation by the algorithms as the images tend to be too complex for the algorithms to output with the necessary accuracy. However, complications exist in the manual segmentation process as these methods can be time intensive and prone to the individual bias of the user. This in turn can skew the final mean fiber diameter result, and lead to either an over or under prediction of the pressure drop. It was also discovered that the porosity data produced by DiameterJ is inaccurate, as the SEM analyzes the three-dimensional filter media by projecting its geometry onto a plane and analyzing it as a two-dimensional binary image. Thus, the porosity is artificially inflated through the segmentation process, rendering this result incorrect. Alternatively, density determination, gravimetric analysis, and thickness testing of the filter media is collectively used to determine the filter fiber porosity. Together, the SEM image analysis and analytical lab methods produce results through direct measurements which allow for the prediction of the initial pressure drop from clean filter media without the need for prior media testing to collect pressure data. By improving upon this proposed analytical method in the future, there is potential to streamline the process of finding these filter properties into a more direct methodology for determining the pressure drop across HEPA filters.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Multicomponent Reynolds-averaged Navier-Stokes simulations of reshocked Richtmyer-Meshkov instability-induced mixing

A third-order weighted essentially nonoscillatory (WENO) finite-difference implementation of a two-equation K–ε multicomponent Reynolds-averaged Navier–Stokes (RANS) model is used to simulate reshocked Richtmyer–Meshkov turbulent mixing of air and sulfur hexafluoride at incident shock Mach numbers Ma s = 1.24, 1.50, 1.98 with Atwood number At = 0.67 and Ma s = 1.45 with At = –0.67. The predicted mixing layer width evolutions are compared with experimental measurements of the width before and after reshock [M. Vetter, B. Sturtevant, Shock Waves 4 (1995) 247; F. Poggi, M.H. Thorembey, G. Rodriguez, Phys. Fluids 10 (1998) 2698] and with the analytical self-similar power-law solution of the simplified model equations before reshock. A new procedure is introduced for the specification of the initial turbulent kinetic energy and its dissipation rate, in which these quantities are related by the linear instability growth rate. The predicted mixing layer widths before reshock are shown to be sensitive to changes in the initial turbulent kinetic energy and its dissipation rate, while the widths after reshock are sensitive to changes in the model coefficients C ε0 and σ ρ appearing in the buoyancy (shock) production terms in the turbulent kinetic energy and dissipation rate equations. Here, a set of model coefficients and initial conditions is shown to predict mixing layer widths in generally good agreement with the pre-reshock experimental data, and very good agreement with the post-reshock data for all cases. Budgets of the turbulent kinetic energy equation just before and after reshock for the Ma s = 1.24 case are used to identify the principal physical mechanisms generating turbulence in reshocked Richtmyer–Meshkov instability: buoyancy production (pressure work) and shear production. Numerical convergence of the mixing layer widths under spatial grid refinement is also demonstrated for each of the Mach numbers considered.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Annular spherically focused ring transducers for improved single-beam acoustical tweezers

The use of ultrasonic transducers with a central hollow is suggested for improved single-beam acoustical tweezers applications. Within the framework of the Fresnel-Kirchhoff parabolic approximation, a closed-form partial-wave series expansion (PWSE) for the incident velocity potential (or pressure) field is derived for an annular spherically focused ring (asfr) with uniform vibration across its surface in spherical coordinates. The Rayleigh-Sommerfeld diffraction integral and the addition theorems for the Legendre and spherical wave functions are used to obtain the PWSE assuming a weakly focused beam (with a focusing angle α ≤ 20°). The PWSE allows evaluating the incident field from the finite asfr in 3D. Moreover, the obtained solution allows computing efficiently the acoustic scattering and radiation force on a sphere centered on the beam's axis of wave propagation. The analytical solution is valid for wavelengths largely exceeding the radius of the asfr and when the viscosity of the surrounding fluid can be neglected. Numerical predictions for the beam-forming, scattering, and axial time-averaged radiation force are performed with particular emphasis on the asfr thickness, the axial distance separating the sphere from the center of the transducer, the (non-dimensional) size of the transducer, as well as the sphere's elastic properties without restriction to the long- (i.e., Rayleigh) or the short-wavelength (i.e., ray acoustics) regimes. Potential applications of the present solution are in beam-forming design, particle tweezing, and manipulation due to negative forces using ultrasonic asfr transducers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improved Design of Motors for Increased Efficiency in Residential Commercial Buildings

Research progress on understanding magnetic steel core losses is presented in this report. Three major aspects have been thoroughly investigated: 1, experimental characterization of core losses, 2, fundamental physical understanding of core losses and development of core loss formulas, and 3, design of more efficient machine based on the new formulations. Considerable progress has been achieved during the four years of research and the main achievements are summarized in the following: For the experimental characterization, a specially designed advanced commercial test bench was commissioned in addition to the development of a laboratory system with advanced capabilities. The measured properties are core losses at low and higher frequencies, with sinusoidal and non-sinusoidal excitations, at different temperatures, with different measurement apparatus (Toroids, Epstein etc). An engineering-based core loss formula has been developed which considers skin effect. The formula can predict core losses for both sinusoidal and non-sinusoidal flux densities and frequencies up to 4000 Hz. The formula is further tested in electric machines. The formula error range is 1.1% - 7.6% while the standard formulas can have % errors between -8.5% {-+} 44.7%. Two general core loss formulas, valid for different frequencies and thickness, have been developed by analytically and numerically solving Maxwell's equations based on a physical investigation of the dynamic hysteresis effects of magnetic materials. To our knowledge, they are the first models that can offer accurate core loss prediction over a wide range of operating frequencies and lamination thicknesses without a massive experimental database of core losses. The engineering core loss formula has been used with commercial software. The formula performs better than the modified Steinmetz and Bertotti's model used in Cedrat/Magsoft Flux 2D/3D. The new formula shows good correlation with measured results under both sinusoidal and non-sinusoidal excitations. A permanent magnet synchronous motor has been designed with the use of the engineering formula with Flux2D. There was acceptable agreement between predictions and measurements. This was further tested on an induction motor with toroid results.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

PANTHER. Pattern ANalytics To support High-performance Exploitation and Reasoning.

Sandia has approached the analysis of big datasets with an integrated methodology that uses computer science, image processing, and human factors to exploit critical patterns and relationships in large datasets despite the variety and rapidity of information. The work is part of a three-year LDRD Grand Challenge called PANTHER (Pattern ANalytics To support High-performance Exploitation and Reasoning). To maximize data analysis capability, Sandia pursued scientific advances across three key technical domains: (1) geospatial-temporal feature extraction via image segmentation and classification; (2) geospatial-temporal analysis capabilities tailored to identify and process new signatures more efficiently; and (3) domain- relevant models of human perception and cognition informing the design of analytic systems. Our integrated results include advances in geographical information systems (GIS) in which we discover activity patterns in noisy, spatial-temporal datasets using geospatial-temporal semantic graphs. We employed computational geometry and machine learning to allow us to extract and predict spatial-temporal patterns and outliers from large aircraft and maritime trajectory datasets. We automatically extracted static and ephemeral features from real, noisy synthetic aperture radar imagery for ingestion into a geospatial-temporal semantic graph. We worked with analysts and investigated analytic workflows to (1) determine how experiential knowledge evolves and is deployed in high-demand, high-throughput visual search workflows, and (2) better understand visual search performance and attention. Through PANTHER, Sandia's fundamental rethinking of key aspects of geospatial data analysis permits the extraction of much richer information from large amounts of data. The project results enable analysts to examine mountains of historical and current data that would otherwise go untouched, while also gaining meaningful, measurable, and defensible insights into overlooked relationships and patterns. The capability is directly relevant to the nation's nonproliferation remote-sensing activities and has broad national security applications for military and intelligence- gathering organizations.

58 GEOSCIENCES↗

Magnetic Properties of a Heisenberg Coupled-Trimer Molecular Magnet: General

We report predictions for the energy eigenstates and inelastic neutron scattering excitations of an isotropic Heisenberg hexamer consisting of general spin S and S′ trimers. Specializing to spin-1/2 ions, we give analytic results for the energy excitations, magnetic susceptibility, and inelastic neutron scattering intensities for this hexamer system. To examine this model further, we compare these calculations to the measured magnetic susceptibility of a vanadium material, which is considered to be well defined magnetically as an isolated S = 1/2 V4+ trimer model. Using our model, we determine the amount of inter-trimer coupling that can be accommodated by the measured susceptibility, and predict the inelastic neutron scattering spectrum for comparison with future measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Event-by-event neutron–photon multiplicity correlations in 252Cf(sf)

Excited nuclear fragments are emitted during nuclear fission. The de-excitation of these fission fragments takes place as sequential emission of neutrons followed by photons. A correlation between neutron and photon multiplicities accompanying fission is thus expected. Fission event generators based on established statistical nuclear physics models predict a negative event-by-event correlation in neutron-photon multiplicity. A survey of published experimental results of an event-by-event covariance between the neutron - photon multiplicities emitted following the spontaneous fission of 252 Cf is presented. Analytic unfolding expressions are developed in this work to determine the bias introduced by background sources, particle misclassification, pulse pileup, and inelastic photon production. The published experimental data are re-analyzed using these unfolding techniques and are found to be in qualitative agreement with the predictions of model-based calculations. Finally, in particular, we have concluded that there exists a significant event-by-event neutron-photon emission competition following the spontaneous fission of 252 Cf.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Observability of negative capacitance of a ferroelectric film: Theoretical predictions

Here, we theoretically explore mechanisms that can potentially give rise to the steady-state and transient negative capacitance in a uniaxial ferroelectric film stabilized by a dielectric layer. The analytical expressions for the steady-state capacitance of a single-domain and polydomain states are derived within the Landau-Ginzburg-Devonshire approach and used to study the state stability vs the domain splitting as a function of dielectric layer thickness. Analytical expressions for the critical thickness of the dielectric layer, polarization amplitude, equilibrium domain period, and susceptibility are obtained and corroborated by finite element modeling. Furthermore we explore the possible effects of nonlinear screening by two types of screening charges at the ferroelectric-dielectric interface and show that if at least one of the screening charges is very slow, the total polarization dynamics can exhibit complex time- and voltage-dependent behaviors that can be interpreted as an observable negative capacitance. In this setting, the transient negative capacitance effect is accompanied by almost zero dielectric susceptibility in a wide voltage range and low frequencies. These results may help to elucidate the observation of the transient negative capacitance in thin ferroelectric films, and identify materials systems that can give rise to the behavior.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

HPC Analytics of Fused Thermal Plants Data to Optimize Operating Envelope

In this project, ORNL extensively reviewed the ORAP RAM data, and it guided us to develop machine learning models that can predict time to next failures and forecast failure trends, which will be useful for optimizing power plant operation strategies. More specifically, we trained multiple random forest models and evaluated the model accuracy to validate with 10+ years of historical data. In addition, we implemented a web-based graphical user interface system for the models to show how our models can be used in more intuitive ways. This proof of concept allowed exploration of model use with power plant operators in mind. Developed machine learning models will be helpful for managing risks, planning maintenance and operation, ultimately reducing the down time and increasing the service hours. For future work, there are several interesting research topics including but not limited to model enhancement, creating synergy with traditional failure modeling approaches, and data-driven actionable recommendation and suggestions.

20 FOSSIL-FUELED POWER PLANTS↗

Viscoelastic necking dynamics between attractive microgels

Hypothesis: Microgels can deform and interpenetrate and display colloid/polymer duality. The effective interaction of microgels in the collapsed state is governed by the interplay of polymer–solvent interfacial tension and bulk elasticity. A connecting neck is shown to mediate microgel interaction, but its temporal evolution has not been addressed. Here we hypothesize that the necking dynamics of attractive microgels exhibits liquid-like or solid-like behavior over different time and length scales. Experiments: We simulate the merging and pinching of attractive microgels with different crosslinking densities in explicit solvent using dissipative particle dynamics. The temporal coalescence dynamics of microgels is investigated and compared with simple liquid and polymeric droplets. We model the neck growth on long time scales using Maxwell model of polymer relaxation and compare the theoretical prediction with simulation data. The mechanical strength of the neck is characterized systematically via simulated pinch-off of microgels by steered molecular dynamics. Findings: We evidence a crossover in the coalescence dynamics reflecting the viscoelastic signature of microgels. In contrast to the common knowledge that viscoelastic materials respond elastically on short time scales, the early expansion of the microgel neck exhibits a linear behavior, similar to the viscous coalescence of liquid droplets. However, the late regime with arrested dynamics resembles sintering of solid particles. Through an analytical model relating microgel dynamics to neck growth, we show that the long-term behavior is governed by stress relaxation of the polymers in the neck region and predict an exponential decay in the rate of growth, which agrees favorably with the simulation. Different from coalescence, the thread thinning in microgel breakup primarily highlights its polymeric characteristics.

42 ENGINEERING↗

Survival analysis of localized prostate cancer with deep learning

In recent years, data-driven, deep-learning-based models have shown great promise in medical risk prediction. By utilizing the large-scale Electronic Health Record data found in the U.S. Department of Veterans Affairs, the largest integrated healthcare system in the United States, we have developed an automated, personalized risk prediction model to support the clinical decision-making process for localized prostate cancer patients. This method combines the representative power of deep learning and the analytical interpretability of parametric regression models and can implement both time-dependent and static input data. To collect a comprehensive evaluation of model performances, we calculate time-dependent C-statistics C td over 2-, 5-, and 10-year time horizons using either a composite outcome or prostate cancer mortality as the target event. The composite outcome combines the Prostate-Specific Antigen (PSA) test, metastasis, and prostate cancer mortality. Our longitudinal model Recurrent Deep Survival Machine (RDSM) achieved C td 0.85 (0.83), 0.80 (0.83), and 0.76 (0.81), while the cross-sectional model Deep Survival Machine (DSM) attained C td 0.85 (0.82), 0.80 (0.82), and 0.76 (0.79) for the 2-, 5-, and 10-year composite (mortality) outcomes, respectively. In addition to estimating the survival probability, our method can quantify the uncertainty associated with the prediction. The uncertainty scores show a consistent correlation with the prediction accuracy. We find PSA and prostate cancer stage information are the most important indicators in risk prediction. Our work demonstrates the utility of the data-driven machine learning model in prostate cancer risk prediction, which can play a critical role in the clinical decision system.

60 APPLIED LIFE SCIENCES↗

On fast radial propagation of parametrically excited geodesic acoustic mode

The spatial and temporal evolution of parametrically excited geodesic acoustic mode (GAM) initial pulse is investigated both analytically and numerically. Our results show that the nonlinearly excited GAM propagates at a group velocity which is, typically, much larger than that due to finite ion Larmor radius as predicted by the linear theory. The nonlinear dispersion relation of GAM driven by a finite amplitude drift wave pump is also derived, showing a nonlinear frequency increment of GAM. Further implications of these findings for interpreting experimental observations are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗