Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reliability Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Fully Oxidized Ni–Fe Layered Double Hydroxide with 100% Exposed Active Sites for Catalyzing Oxygen Evolution Reaction

Ni–Fe layered double hydroxides (LDHs) are promising for catalyzing the oxygen evolution reaction (OER) in alkaline media. However, the OER mechanism is highly debated, partially because of the lack of an ideal catalyst with 100% exposed active sites for unambiguous characterization. In this paper, we develop an alcohol intercalation method to prepare ultrathin Ni–Fe LDH with a 1/3 unit-cell thickness and 100% exposed active sites. The ultrathin LDH catalyst exhibits an intrinsic activity similar to the bulk LDH and allows a direct and reliable characterization of the catalyst without any interference from “bulk” inactive species. Operando synchrotron X-ray analysis indicates that the metallic ions in ultrathin Ni–Fe LDH are fully oxidized into tetravalence states at low applied potentials and that the OER occurs on the tetravalent Ni and Fe ions following a decoupled proton/electron mechanism. In conclusion, our findings demonstrate that a full oxidization of metal ions is crucial for highly active NiFe LDHs and that it can be accomplished by engineering ultrathin nanostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of Aza- m -Xylylene diradicals with large singlet-triplet energy gap and statistical analyses of their EPR spectra

We describe synthesis and characterization of a derivative of aza- m -xylylene, diradical 2 , that is persistent in solution at room temperature with the half-life measured in minutes (~80–250 s) and in which the triplet ground state is below the lowest singlet state by >10 kcal mol⁻¹. The triplet ground states and ΔE ST of 2 in glassy solvent matrix are determined by a new approach based on statistical analyses of their EPR spectra. Characterization and analysis of the analogous diradical 1 are carried out for comparison. Statistical analyses of their EPR spectra reliably provide improved lower bounds for ΔE ST (from >0.4 to >0.6 kcal mol⁻¹) and are compatible with a wide range of relative contents of diradical vs monoradical, including samples in which the diradical and monoradical are minor and major components, respectively. This demonstrates a new powerful method for the determination of the triplet ground states and ΔE ST applicable to moderately pure diradicals in matrices.

Olankitwanit, Arnon↗

Stochastic optimization of a cold atom experiment using a genetic algorithm

We employ an evolutionary algorithm to automatically optimize different stages of a cold atom experiment without human intervention. This approach closes the loop between computer based experimental control systems and automatic real time analysis and can be applied to a wide range of experimental situations. The genetic algorithm quickly and reliably converges to the most performing parameter set independent of the starting population. Especially in many-dimensional or connected parameter spaces, the automatic optimization outperforms a manual search.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dynamic fracture of functionally graded magnetoelectroelastic composite materials

The stress, magnetic and electric field analysis of multifunctional composites, weakened by impermeable cracks, is of fundamental importance for their structural integrity and reliable service performance. The aim is to study dynamic behavior of a plane of functionally graded magnetoelectroelastic composite with more than one crack. The coupled material properties vary exponentially in an arbitrary direction. The plane is subjected to anti-plane mechanical and in-plane electric and magnetic load. The boundary value problem described by the partial differential equations with variable coefficients is reduced to a non-hypersingular traction boundary integral equation based on the appropriate functional transform and frequency-dependent fundamental solution derived in a closed form by Radon transform. Software code based on the boundary integral equation method (BIEM) is developed, validated and inserted in numerical simulations. The obtained results show the sensitivity of the dynamic stress, magnetic and electric field concentration in the cracked plane to the type and characteristics of the dynamic load, to the location and cracks disposition, to the wave-crack-crack interactions and to the magnitude and direction of the material gradient.

36 MATERIALS SCIENCE↗

C IV LINE-WIDTH ANOMALIES: THE PERILS OF LOW SIGNAL-TO-NOISE SPECTRA

Comparison of six high-redshift quasar spectra obtained with the Large Binocular Telescope with previous observations from the Sloan Digital Sky Survey shows that failure to correctly identify absorption and other problems with accurate characterization of the C IV λ1549 emission line profile in low signal-to-noise (S/N) data can severely limit the reliability of single-epoch mass estimates based on the C IV emission line. We combine the analysis of these new high-quality data with a reanalysis of three other samples based on high-S/N spectra of the C IV emission line region. We find that a large scatter between the Hβ- and C IV-based masses remains even for this high-S/N sample when using the FWHM to characterize the broad-line region velocity dispersion and the standard virial assumption to calculate the mass. However, we demonstrate that using high-quality data and the line dispersion to characterize the C IV line width leads to a high level of consistency between C IV- and Hβ-based masses, with <0.3 dex of observed scatter and an estimated ∼0.2 dex intrinsic scatter, in the mass residuals.

79 ASTRONOMY AND ASTROPHYSICS↗

AEGIS-X: Deep Chandra imaging of the central Groth strip

We present the results of deep Chandra imaging of the central region of the Extended Groth Strip, the AEGIS-X Deep (AEGIS-XD) survey. When combined with previous Chandra observations of a wider area of the strip, AEGIS-X Wide (AEGIS-XW), these provide data to a nominal exposure depth of 800 ks in the three central ACIS-I fields, a region of approximately 0.29 deg{sup 2}. This is currently the third deepest X-ray survey in existence; a factor ∼2−3 shallower than the Chandra Deep Fields (CDFs), but over an area ∼3 times greater than each CDF. We present a catalog of 937 point sources detected in the deep Chandra observations, along with identifications of our X-ray sources from deep ground-based, Spitzer, GALEX, and Hubble Space Telescope imaging. Using a likelihood ratio analysis, we associate multiband counterparts for 929/937 of our X-ray sources, with an estimated 95% reliability, making the identification completeness approximately 94% in a statistical sense. Reliable spectroscopic redshifts for 353 of our X-ray sources are available predominantly from Keck (DEEP2/3) and MMT Hectospec, so the current spectroscopic completeness is ∼38%. For the remainder of the X-ray sources, we compute photometric redshifts based on multiband photometry in up to 35 bands from the UV to mid-IR. Particular attention is given to the fact that the vast majority the X-ray sources are active galactic nuclei and require hybrid templates. Our photometric redshifts have mean accuracy of σ=0.04 and an outlier fraction of approximately 5%, reaching σ=0.03 with less than 4% outliers in the area covered by CANDELS . The X-ray, multiwavelength photometry, and redshift catalogs are made publicly available.

79 ASTRONOMY AND ASTROPHYSICS↗

Determination of nuclear PDFs using Markov chain Monte Carlo methods

Global QCD analyses of nuclear parton distribution functions (nPDFs) have traditionally relied on the Hessian method for uncertainty estimation. However, the inherent Gaussian approximation and reliance on local curvature often prove insufficient for nPDF fits, which are frequently characterized by limited data constraints and non-Gaussian likelihoods. In this paper, we present the first nPDF determination based on Markov Chain Monte Carlo (MCMC) techniques, implemented within the nCTEQ framework using an adaptive Metropolis-Hastings algorithm. The MCMC approach enables a direct mapping of the posterior distribution and reveals a highly nontrivial parameter-space structure, including multiple modes and pronounced non-Gaussian behavior, particularly for the valence PDFs. We perform the first single-nucleus global analysis of lead PDFs using exclusively lead data and compare it to a multi-nuclei fit employing a standard analytic A dependence. The inclusion of lighter nuclei reduces quark uncertainties and modifies the shape of the lead PDFs, while leaving the gluon distribution largely unaffected. A complementary Hessian analysis exposes systematic limitations of the Gaussian approximation. Our results demonstrate that MCMC methods provide a more reliable framework for uncertainty quantification in nPDF determinations.

Derakhshanian, N. [Institute of Nuclear Physics Po↗

Constructing angular distributions of neutrinos in core-collapse supernovae from zeroth and first moments calibrated by full Boltzmann neutrino transport

Two-moment neutrino transport methods have been widely used for developing theoretical models of core-collapse supernovae (CCSN), since they substantially reduce the computational burden inherent in the multidimensional neutrino-radiation hydrodynamical simulations. The approximation, however, comes at a price; the detailed structure of angular distribution of neutrinos is sacrificed, that is the main drawback of this approach. In this paper, we develop a novel method by which to construct angular distributions of neutrinos from the zeroth and first angular moments. In our method, the angular distribution is expressed with two quadratic functions of the neutrino angle in a piecewise fashion. We determine the best parameters in the fitting function by comparing to the neutrino data in a spherically symmetric CCSN model with full Boltzmann neutrino transport. We demonstrate the capability of our method by using our recent 2D CCSN model. In this work, we find that the essential features of the angular distributions can be well reconstructed, whereas the angular distributions of incoming neutrinos tend to have large errors that increase with flux factor ($\textit{κ}$). This issue originates from the insensitiveness of incoming neutrinos to $\textit{κ}$, that is an intrinsic limitation in moment methods. Based on the results of the demonstration, we assess the reliability of electron- neutrinos lepton number (ELN)-crossing searches with the two-moment neutrino transport. This analysis is complementary to our [L. Johns and H. Nagakura arXiv:2104.04106] that scrutinizes the limitation of crossing searches with a few moments. We find that the systematic errors of angular distributions for incoming neutrinos lead to misjudgements of the crossing at $\textit{κ}$ ≳ 0.5. This casts doubt on the results of ELN-crossing searches based on two-moment methods in some previous studies.

79 ASTRONOMY AND ASTROPHYSICS↗

How Accurate Are Simulations and Experiments for the Lattice Energies of Molecular Crystals?

Molecular crystals play a central role in a wide range of scientific fields, including pharmaceuticals and organic semiconductor devices. However, they are challenging systems to model accurately with computational approaches because of a delicate interplay of intermolecular interactions such as hydrogen bonding and Van der Waals dispersion forces. Here, by exploiting recent algorithmic developments, we report the first set of diffusion Monte Carlo lattice energies for all 23 molecular crystals in the popular and widely used X23 dataset. Comparisons with previous state-of-the-art lattice energy predictions (on a subset of the dataset) and a careful analysis of experimental sublimation enthalpies reveals that high-accuracy computational methods are now at least as reliable as (computationally derived) experiments for the lattice energies of molecular crystals. Overall, this work demonstrates the feasibility of high-level explicitly correlated electronic structure methods for broad benchmarking studies in complex condensed phase systems, and signposts a route towards closer agreement between experiment and simulation. Published by the American Physical Society 2024

Physics↗

Cabibbo-Kobayashi-Maskawa unitarity deficit reduction via finite nuclear size

We revisit the extraction of the |𝑉 𝑢⁢𝑑 | Cabibbo-Kobayashi-Maskawa (CKM) matrix element from the superallowed transition decay rate of 26⁢𝑚 Al → 26 Mg, focusing on finite nuclear size effects. The decay rate dependence on the 26⁢𝑚 Al charge radius is found to be four times higher than previously believed, necessitating precise determination. However, for a short-lived isotope of an odd 𝑍 element such as 26⁢𝑚 Al , radius extraction relies on challenging many-body atomic calculations. We performed the needed calculations, finding an excellent agreement with previous ones, which used a different methodology. This sets a new standard for the reliability of isotope shift factor calculations in many-electron systems. The ℱ⁡𝑡 value obtained from our analysis is lower by 2.2𝜎 than the corresponding value in the previous critical survey, resulting in an increase in |𝑉 𝑢⁢𝑑 | 2 by 0.9𝜎. Adopting |𝑉 𝑢⁢𝑑 | from this decay alone reduces the CKM unitarity deficit by one standard deviation, irrespective of the choice of |𝑉 𝑢⁢𝑠 |.

beta-decay↗

Decoupling Power Quality Issues in Grid-Microgrid Network Using Microgrid Building Blocks

Microgrids are evolving as promising options to enhance reliability of the connected transmission and distribution systems. Traditional design and deployment of microgrids require significant engineering analysis. However, Microgrid Building Blocks (MBB), consisting of modular blocks that integrate seamlessly to form effective microgrids, are promising technologies to enable faster and broader adoption of microgrids. Back-to-Back converter placed at the point of common coupling of microgrid is an integral part of MBB. This paper presents applications of MBB to decouple power quality issues in grid-microgrid network serving power quality sensitive critical loads such as data centers, new grid-edge technologies such as vehicle-to-grid generation, and emergency condition loads such as electric vehicle charging loads during evacuation prior disaster events. Simulation results show that MBB effectively decouple the power quality issues across networks and allow network with low power quality to transfer high-power quality power to connected networks during emergency conditions.

Acharya, Samrat S. [BATTELLE (PACIFIC NW LAB)]↗

Review of High‐Speed Digital Image Correlation: Advancements and Good Practices

This paper reviews the current state of the art in high‐speed (HS) and ultrahigh‐speed (UHS) digital image correlation (DIC) techniques, emphasizing their critical role in experimental research across various scientific domains. HS and UHS DIC have evolved significantly, driven by advancements in camera systems, image processing algorithms and experimental methodologies. These developments have opened new avenues for capturing and analysing dynamic events with unprecedented temporal and spatial detail, but not without introducing challenges such as optical distortions, motion blur and lighting issues that can affect measurement quality. This review advocates for standardized reporting practices in HS/UHS DIC methodologies to improve reproducibility and reliability across studies, drawing on guidelines from the International Digital Image Correlation Society (iDICs). Through a comprehensive analysis of over 150 articles, this review identifies key advancements in imaging technology and their application in six research domains: material characterization, test development, fracture mechanics, model validation, ballistic and explosive phenomena assessment and measurement uncertainties. Distinctions between two‐dimensional (2D) and stereo‐DIC applications are explored, offering insights into their practical implementation and trade‐offs. Good practices for HS/UHS DIC applications are proposed along with suggestions for future directions for this evolving field, highlighting the indispensable role of technological innovation in expanding the capabilities of optical metrology.

experimental mechanics↗

Performance Demonstration Program Plan for RCRA Constituent Analysis of Solidified Wastes (Rev 8)

The Performance Demonstration Program (PDP) for Resource Conservation and Recovery Act (RCRA) constituents distributes test samples for analysis of volatile organic compounds (VOCs), semivolatile organic compounds (SVOCs), and metals in solid matrices. Each distribution of test samples is termed a PDP cycle. These evaluation cycles provide an objective measure of the reliability of measurements performed for transuranic (TRU) waste characterization. The primary documents governing the conduct of the PDP are the Quality Assurance Program Document (QAPD; DOE/CBFO-94-1012) and the Waste Isolation Pilot Plant (WIPP) Waste Analysis Plan (WAP) contained in the Hazardous Waste Facility Permit (NM4890139088-TSDF) issued by the New Mexico Environment Department. The WAP requires participation in the PDP; the PDP must comply with the QAPD and the WAP. This plan implements the general requirements of the QAPD and the applicable requirements of the WAP for the RCRA PDP. Participating laboratories demonstrate acceptable performance by successfully analyzing single- blind performance evaluation samples (subsequently referred to as PDP samples) according to the criteria established in this plan. PDP samples are used as an independent means to assess laboratory performance regarding compliance with the WAP quality assurance objectives (QAOs). The concentrations of analytes in the PDP samples address levels of regulatory concern and encompass the range of concentrations anticipated in waste characterization samples. The WIPP requires analyses of homogeneous solid wastes to demonstrate compliance with regulatory requirements. These analyses must be performed by laboratories that demonstrate acceptable performance in this PDP. These analyses are referred to as WIPP analyses, and the samples on which they are performed are referred to as WIPP samples. Participating laboratories must analyze PDP samples using the same procedures used for WIPP samples.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Deploying Adversarial Attacks in Super-Resolution Models

Reliable super-resolution methods are crucial for applications like remote sensing, grid resilience and disaster impact analysis, and standoff biometrics. These methods infuse additional high-frequency information into reconstructions, allowing for better contextualization and image intelligence. However, super-resolution models can also introduce hallucinations or other unseen vulnerabilities that could be exploited by an adversary. This is further compounded by the prominence of deep learning in these models, as models are often blindly applied on out-of-distribution images. In this work, we implement adversarial attacks in common open-source super-resolution models and examine their impact on reconstructions and downstream classification tasks. We find that an adversarially trained super-resolution model can produce high-quality reconstructions that degrade downstream classifications. Moreover, these attacks do not require access to low-resolution imagery or class labels at inference time. These results demonstrate the vulnerability of super-resolution methods to malicious actors and motivates the development of a detector for super-resolution adversarial attacks. Further exploration of adversarial attacks in this domain is required to ensure trustworthiness and robustness of super-resolution models for national security applications.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

A Complete Census of Hα Emitters in NGC 6397

We used a data set of archival Hubble Space Telescope images obtained through the F555W, F814W, and F656N filters to perform a complete search for objects showing Hα emission in the globular cluster NGC 6397. As a photometric diagnostic, we used the (V−Hα){sub 0} color excess in the (V−Hα){sub 0}–(V−I){sub 0} color–color diagram. In the analyzed field of view, we identified 53 Hα emitters. In particular, we confirmed the optical counterpart to 20 X-ray sources (7 cataclysmic variables, 2 millisecond pulsars and 11 active binaries) and identified 33 previously unknown sources, thus significantly enlarging the population of known active binaries in this cluster. We report the main characteristics for each class of objects. Photometric estimates of the equivalent width of the Hα emission line were derived from the (V−Hα){sub 0}-excess and, for the first time, compared to the spectroscopic measurements obtained from the analysis of MUSE spectra. The very good agreement between the spectroscopic and photometric measures fully confirmed the reliability of the proposed approach to measure the Hα emission. The search demonstrated the efficiency of this novel approach to pinpoint and measure Hα-emitters, thus offering a powerful tool to conduct a complete census of objects with formations and evolutions that can be strongly affected by dynamical interactions in star clusters.

79 ASTRONOMY AND ASTROPHYSICS↗

Modernization of the Radiation Measurements Laboratory at the Advanced Test Reactor Complex

The Advanced Test Reactor (ATR) at the Idaho National Laboratory (INL) is a unique, water-cooled, high-flux test reactor capable of performing tests prototypical of PWR operating conditions. The Radiation Measurements Laboratory (RML) was founded in the 1960s to support reactor operations and to conduct independent scientific research. For nearly six decades RML has performed four primary functions: monitoring of radioactivity by gamma-ray spectroscopy of routine reactor samples, fluence rate determinations for irradiation cycles, fission-rate measurements for the ATR-Critical (ATR-C) Facility, and independent research and development of radiation detection systems and applications. Through the decades, RML has seen technological advancements that have been integrated into each of the critical functions of the laboratory. However, many of the measurement and analysis systems employed to this day can be improved by modernization. Recent progess at RML are improving reliability and accuracy of the radiation measurements performed in support of nuclear energy research for the U.S.A. Department of Energy. The control and data collection systems supporting ATR-C have been upgraded. New High-Purity Germanium (HPGe) spectrometers have been procured with liquid nitrogen recycling capabilities to improve up-time and reduce measurement uncertainties. Fluence-rate measurement techniques are also being improved to ensure accuracy, avoid systemic errors, and identify biases. In a parallel effort, new scientific research avenues are being explored which will provide an opportunity to further enhance the utilization of ATR and ensure the sustainability of the RML as nuclear research continues to evolve. The RML is improving the effectiveness of irradiation services provided by ATR while ensuring a sustainable future for nuclear energy research.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Existing generating assets squeezed as new project starts slow

Most forecasting reports concentrate on political or regulatory events to predict future industry trends. Frequently overlooked are the more empirical performance trends of the principal power generation technologies. Solomon and Associates queried its many power plant performance databases and crunched some numbers to identify those trends. Areas of investigation included reliability, utilization (net output factor and net capacity factor) and cost (operating costs). An in-depth analysis for North America and Europe is presented in this article, by region and by regeneration technology. 4 figs., 2 tabs.

20 FOSSIL-FUELED POWER PLANTS↗