Search NASA⌕ Search

SEARCH · Search NASA

Results for “SINTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Reducing the deactivation of Ni-metal during the catalytic partial oxidation of a surrogate diesel fuel mixture

Ni catalysts are active and selective for the conversion of hydrocarbon into synthesis gas. However, conventional supported Ni catalysts rapidly deactivate at the high temperatures required for partial oxidation of diesel fuel by sintering and metal vaporization, as well as by carbon deposition and sulfur poisoning. Thus, to reduce deactivation Ni (3 wt%) was substituted into the structures of Ba-hexaaluminate (BNHA) and La–Sr–Zr pyrochlore (LSZN), and their activity was compared to a supported Ni/Al 2 O 3 for the catalytic partial oxidation (CPOX) of a surrogate diesel fuel. Characterization by XRD showed a single phase β-alumina for the hexaaluminate, while LSZN had a pyrochlore structure with a defect SrZrO 3 perovskite phase. Temperature programmed reduction experiments confirmed Ni was reducible in all catalysts. XANES results confirmed that Ni atoms were substituted into the hexaaluminate and pyrochlore structures, as spectra for each catalyst showed different coordination environments for Ni compared to a NiO standard. During CPOX activity tests (T = 900 °C and WHSV = 50,000 scc/g cat /h), the LSZN pyrochlore produced stable H 2 and CO yields in the presence of 5 wt% 1-methylnaphthalene and 50 ppmw dibenzothiophene/n-tetradecane for 2 h, while both Ni/Al 2 O 3 and BNHA catalysts were irreversibly deactivated by this mixture over the same time. Finally, activity loss was strongly linked to carbon formation.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Deactivation Mechanisms of Pt/Pd-based Diesel Oxidation Catalysts

Currently precious metal-based diesel oxidation catalysts (DOC) containing platinum (Pt) and palladium (Pd) are most commonly used for the oxidation of hydrocarbon and NO in diesel exhaust hydrocarbon oxidation. The present work has been carried out to investigate the deactivation mechanisms of the DOC from its real-world vehicle operation by coupling its catalytic activity measurements with surface characterization including x-ray diffraction, transmission electron microscopy, and x-ray photoelectron spectroscopy. A production Pt-Pd DOC was obtained after being aged on a vehicle driven for 135,000 miles in order to study its deactivation behavior. The performance of the vehicle-aged part was correlated with that of the simulated hydrothermal lab aged sample assuming that Pt-Pd sintering plays a major role in irreversible catalyst deactivation. In addition to the hydrothermal sintering, the deterioration of hydrocarbon and NO oxidation performance was caused by surface poisoning. The role of the various aging factors in determining long-term performance in mobile applications will be discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Compositional inhomogeneityand segregation in (K 0.5 Na 0.5 )NbO 3 ceramics

The effects of the calcination temperature of (K 0.5 Na 0.5 )NbO 3 (KNN) powder on the sintering and piezoelectric properties of KNN ceramics have been investigated in this report. KNN powders are synthesized via the solid-state approach. Scanning electron microscopy and X-ray diffraction characterizations indicate that the incomplete reaction at 700 °C and 750 °C calcination results in the compositional inhomogeneity of the K-rich and Na-rich phases while the orthorhombic single phase is obtained after calcination at 900 °C. During the sintering, the presence of the liquid K-rich phase due to the lower melting point has a significant impact on the densification, the abnormal grain growth and the deteriorated piezoelectric properties. From the standpoint of piezoelectric properties, the optimal calcination temperature obtained for KNN ceramics calcined at this temperature is determined to be 800 °C, with piezoelectric constant d 33 =128.3 pC/N, planar electromechanical coupling coefficient k p =32.2%, mechanical quality factor Q m =88, and dielectric loss tan δ=2.1%.

36 MATERIALS SCIENCE↗

Effects of roasting additives and leaching parameters on the extraction of rare earth elements from coal fly ash

Coal fly ash is a promising alternative source for rare earth elements (REE), which are critical materials in many technologies. REEs are entrained in the aluminosilicate glass of the fly ash particles, hindering their ability to solubilize during acid leaching. The purpose of this research was to test the effectiveness of roasting techniques to improve extraction of REEs from fly ash, determine key parameters controlling REE extraction, and understand trade-offs in reagent use. Representative coal ash samples from major U.S. coal basins (Appalachian, Illinois, and Powder River basins) were roasted using a variety of chemical additives (Na 2 O 2 , NaOH, CaO, Na 2 CO 3 , CaSO 4 , (NH 4 ) 2 SO 4 ). Further experiments investigated the effects of additive:ash ratio, roasting temperature, and leachate pH on REE extraction. We found here that NaOH roasting often recovered >90% of total REE content, equivalent to the USGS-recommended method (Na 2 O 2 sintering). Other additives tested recovered <50% of total REE content; the 450 °C sinter temperature, which was well below the melting points of these agents, may have been a contributing factor. Decreasing the NaOH-ash ratio did not significantly inhibit in REE recoveries, while increasing the leachate pH led to a sharp decline. There was a strong positive correlation between REE extraction and leachate H + molarity. Recoveries of ~100% were observed for the Powder River Basin ash sample regardless of the roasting agent and additive:ash ratio used. This suggests that acid leaching alone is sufficient for recovering REEs from more soluble Powder River Basin ashes. For Appalachian and Illinois Basin ashes, the recommended roasting conditions for >70% REE extraction are a 1:1 NaOH-ash ratio and leaching with 1–2 mol/L HNO 3 .

01 COAL, LIGNITE, AND PEAT↗

Sulfur behavior in chemical looping combustion with NiO/Al{sub 2}O{sub 3} oxygen carrier

Chemical looping combustion (CLC) is a novel technology where CO{sub 2} is inherently separated during combustion. Due to the existence of sulfur contaminants in the fossil fuels, the gaseous products of sulfur species and the interaction of sulfur contaminants with oxygen carrier are a big concern in the CLC practice. The reactivity of NiO/Al{sub 2}O{sub 3} oxygen carrier reduction with a gas mixture of CO/H{sub 2} and H{sub 2}S is investigated by means of a thermogravimetric analyzer (TGA) and Fourier Transform Infrared spectrum analyzer in this study. An X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and scanning electron microscope (SEM) are used to evaluate the phase characterization of reacted oxygen carrier, and the formation mechanisms of the gaseous products of sulfur species are elucidated in the process of chemical looping combustion with a gaseous fuel containing hydrogen sulfide. The results show that the rate of NiO reduction with H{sub 2}S is higher than the one with CO. There are only Ni and Ni{sub 3}S{sub 2} phases of nickel species in the fully reduced oxygen carrier, and no evidence for the existence of NiS or NiS{sub 2}. The formation of Ni{sub 3}S{sub 2} is completely reversible during the process of oxygen carrier redox. A liquid phase sintering on the external surface of reduced oxygen carriers is mainly attributed to the production of the low melting of Ni{sub 3}S{sub 2} in the nickel-based oxygen carrier reduction with a gaseous fuel containing H{sub 2}S. Due to the sintering of metallic nickel grains on the external surface of the reduced oxygen carrier, further reaction of the oxygen carrier with H{sub 2}S is constrained, and there is no increase of the sulfidation index of the reduced oxygen carrier with the cyclical reduction number. Also, a continuous operation with a syngas of carbon monoxide and hydrogen containing H{sub 2}S is carried out in a 1 kW{sub th} CLC prototype based on the nickel-based oxygen carrier, and the effect of the fuel reactor temperature on the release of gaseous products of sulfur species is investigated. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An investigation of a multi-layered oscillating heat pipe additively manufactured from Ti-6Al-4V powder

Here, a laser powder bed fusion (L-PBF) additive manufacturing (AM) method was employed for fabricating a multi-layered, Ti-6Al-4V oscillating heat pipe (ML-OHP). The 50.8 × 38.1 × 15.75 mm 3 ML-OHP consisted of four inter-connected layers of circular mini-channels, as well an integrated, hermetic-grade fill port. A series of experiments were conducted to characterize the ML-OHP thermal performance by varying power input (up to 50 W), working fluid (water, acetone, Novec™ 7200, and n-pentane), and operating orientation (vertical bottom-heating, horizontal, and vertical top-heating). The ML-OHP was found to operate effectively for all working fluids and orientations investigated, demonstrating that the OHP can function in a multi-layered form, and further indicating that one can ‘stack’ multiple, interconnected OHPs within flat media for increased thermal management. The ML-OHP evaporator size was found to depend on the layer-wise heat penetration which subsequently depends on power input and the ML-OHP design and material selection. Using neutron radiography, electron scanning microscopy and surface metrology, the ML-OHP channel structure was characterized and found to possess sintered Ti-6Al-4V powder along its periphery. The sintered channel surface, although a byproduct of the L-PBF manufacturing process, was found to behave as a secondary wicking structure for enhanced capillary pumping and wall/fluid heat transfer within the OHP. With the newfound capabilities of AM, many high heat flux thermal management devices, specifically those that employ mini- or micro-channels, can be ‘re-invented’ to possess embedded channels with atypical geometries, arrangements and surface conditions.

42 ENGINEERING↗

Effect of Ca Doping on the Electrical Conductivity of the High-Temperature Proton Conductor LaNbO4

The sintering properties, crystal structure and electrical conductivity of La1-xCaxNbO4- (x=0, 0.005, 0.01, 0.015, 0.02 and 0.025), prepared by a conventional solid-state method, have been investigated using powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). In 2.5% Ca doped samples, a small amount of impurities Ca2Nb2O7 were observed from the XRD patterns. Impedance spectra show that the grain boundary resistance increases with increasing Ca content, while the bulk resistance remains essentially constant below 550 C. Despite the higher degree of grain growth was observed for higher Ca-doping levels, the total conductivity of the La1-xCaxNbO4- series decreases with increasing Ca content from 0.5 to 2.0 mol%. The activation energy for the total conductivity decreases with increasing Ca content from 0.71 eV (x=0) to 0.54 eV (x=0.01) for the high temperature tetragonal phase, then it increases to 0.60 eV for x=0.02. For the monoclinic phase, La0.995Ca0.005NbO4- shows the lowest activation energy of 1.26 eV. These results imply that the solubility of CaO in LaNbO4 is in the range from 0.5 to 1.0 mol%. By increasing the sintering temperature from 1500 C to 1550 C, the proton conductivity of the Ca-doped LaNbO4 was improved with enlarged grain size due to a reduction in the resistive grain boundary contribution.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Minimizing particle aggregation in Sm 2 Fe 17 N 3 powders: A CaO-assisted reduction-diffusion approach

We report a novel synthesis of Sm 2 Fe 17 N 3 powders using a CaO-assisted reduction-diffusion (RD) approach. CaO plays a crucial role during mechanochemical processing – acting both as a dispersant and a surface coating agent, which helps to prevent agglomeration due to sintering of Sm 2 Fe 17 particles during the RD step. Together with the added dispersant, the CaO by-product formed during RD can be easily removed in the washing step resulting in fewer aggregated Sm 2 Fe 17 N 3 particles and lower oxygen contamination in the final product. The impact of varying CaO amounts was examined, and synthesis conditions were optimized to achieve phase-pure Sm 2 Fe 17 N 3 powders with less aggregation of magnetic particles. The powders synthesized with addition of 1 wt% CaO as dispersant exhibited the highest hard-magnetic properties: a coercivity (H c ) of 10.7 kOe and a maximum energy product ((BH) max ) of 17.3 MGOe. By densifying the Sm 2 Fe 17 N 3 powders using high-pressure spark plasma sintering, a bulk magnet with a (BH) max of 21.1 MGOe with 88 % of theoretical density was produced. In conclusion, reducing aggregation of the Sm 2 Fe 17 N 3 increases coercivity and remanence of these magnets.

36 MATERIALS SCIENCE↗

Identifying higher oxygenate synthesis sites in Cu catalysts promoted and stabilized by atomic layer deposited Fe 2 O 3

The conversion of syngas to higher oxygenates is an important step in the pathway towards the long-term sustainable production of fuels and chemicals. Mixed Cu/Fe catalysts combine metals with different CO activation characteristics, a property that makes them promising candidates for higher oxygenate production. However, Cu/Fe catalysts suffer from instability due to sintering and phase separation, and the active sites for higher oxygenate formation on these materials are not well understood. In this work, we use atomic layer deposition (ALD) to modify silica-supported Cu nanoparticles with monolayer precise amounts of Fe 2 O 3 and study the effects on catalyst structure, reactivity, and stability. We demonstrate that the Fe 2 O 3 ALD process is inherently selective towards deposition on the SiO 2 surface versus the Cu nanoparticles. As a result, a sufficiently thick Fe 2 O 3 layer surrounding the Cu nanoparticles acts as a barrier against Cu migration, preventing catalyst deactivation through sintering without covering the Cu. In syngas conversion reactions, we find that higher oxygenate selectivity increases with Fe 2 O 3 loading at low and intermediate ALD cycle numbers. Furthermore, using in situ X-ray absorption spectroscopy, we demonstrate that the Fe near the Cu nanoparticles is reduced to a metallic state under reaction conditions. From these measurements, we identify these metallic Cu/Fe interfaces as the active sites for higher oxygenate formation, which are most abundant at intermediate Fe 2 O 3 ALD cycle numbers. As the Fe 2 O 3 loading increases, higher oxygenate selectivity falls, resulting from encapsulation of the Cu nanoparticles by thick Fe 2 O 3 layers. Overall, the results demonstrate how thickness-controlled ALD Fe 2 O 3 can be used as both a promoter and stabilizer of Cu-based higher oxygenate synthesis catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Blue emission of Eu 2+ -doped translucent alumina

Inorganic scintillators are very important in medical and industrial measuring systems in the detection and measurement of ionizing radiation. In addition to Ce 3+ , a widely used dopant ion in oxide scintillators, divalent Europium (Eu 2+ ) has shown promise as a high-luminescence, fast-response luminescence center useful in the detection of ionizing radiation. In this research, aluminum oxide (Al 2 O 3 ) was studied as a host material for the divalent europium ion. Polycrystalline samples of Eu 2+ -doped translucent Al 2 O 3 were fabricated, and room temperature luminescence behavior was observed. Al 2 O 3 ceramics doped with 0.1 at% Eu 2+ were fabricated with a relative density of 99.75% theoretical density and in-line transmittance of 22% at a wavelength of 800 nm. The ceramics were processed by a gel-casting method, followed by sintering under high vacuum. The gelling agent, a copolymer of isobutylene and maleic anhydride, is marketed under the commercial name ISOBAM, and has the advantage of simultaneously acting as both a gelling agent and as a dispersant. The microstructure and composition of the vacuum-sintered Eu 2+ :Al 2 O 3 were characterized by Scanning Electric Microscopy (SEM), Transmission Electron Microscopy (TEM), and Energy-dispersive X-ray spectroscopy (EDS). The phase composition was determined by X-ray diffraction measurements (XRD) combined with Rietveld analysis. The photoluminescence behavior of the Eu 2+ :Al 2 O 3 was characterized using UV light as the excitation source, which emitted blue emission at 440 nm. The radio-luminescence of Eu 2+ :Al 2 O 3 was investigated by illumination with X-ray radiation, showing three emission bands at 376 nm, 575 nm and 698 nm. Furthermore, multiple level traps at different depths were detected in the Eu 2+ :Al 2 O 3 by employing thermoluminescence measurements.

36 MATERIALS SCIENCE↗

Physical properties of an alumino-silicate waste form for cesium and strontium.

Nuclear fuel reprocessing will be required to sustain nuclear power as a baseload energy supplier for the world. New reprocessing schemes offer an opportunity to develop a better strategy for recycling elements in the fuel and preparing stable waste forms. Advanced strategies could create a waste stream of cesium, strontium, rubidium, and barium. Some physical properties of a waste form containing these elements sintered into bentonite clay were evaluated. We prepared samples loaded to 27% by mass to a density of approximately 3 g/cm{sup 3}. Sintering temperatures of up to 1000 C did not result in volatility of cesium. Instead, the crystallinity noticeably increased in the waste form as temperatures increased from 600 to 1000 C. Assemblages of silicates were formed. Significant water evolved at approximately 600 C but no other gases were generated at higher temperatures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effect of high scandium doping in barium zirconate on nickel diffusion and performance of proton-conducting solid oxide electrolyzer cells

Proton-conducting solid oxide electrolyzer cells (p-SOECs) are emerging but promising technologies for hydrogen production. However, due to the lack of a robust electrolyte, p-SOECs struggle simultaneously to display high performance, Faradaic efficiency, and durability. Motivated by its high proton concentrations and stability as a barium zirconate, we have investigated BaZr 0.6 Sc 0.4 O 3-δ (BZSc40) as a potential next-generation p-SOEC electrolyte. Here, we found elevated levels of NiO diffusion through BZSc40 electrolytes during high-temperature sintering, attributed to the large oxygen vacancy concentrations present in BZSc40, as revealed by first-principle computational results. Controlling NiO diffusion is critical, as it can facilitate densification and grain size growth, but it may also detrimentally impact performance by causing electronic leakage. By optimizing sintering temperature when fabricating BZSc40 cells, we successfully controlled NiO diffusion, achieving sufficient electrolyte densification along with high performance and Faradaic efficiency. BZSc40 cells reached −0.99 A/cm 2 at 1.3 V and 600 °C and exhibited enhanced durability with a 3.37 mV/kh degradation rate at −0.8 A/cm 2 over a 200-h testing period. BZSc40 electrolytes demonstrated superior performance over BaZr 0.8 Y 0.2 O 3-δ (BZY20). In addition to elevated current densities and grain sizes, BZSc40 cells achieved Faradaic efficiencies of 76 % compared to 54 % for BZY20 at −0.2 A/cm 2 and 600 °C. This work lays the foundation for BZSc40 as a potential electrolyte due to its advantages over BZY20 while demonstrating the significance of controlling NiO diffusion when fabricating p-SOECs.

Electrolyzer↗

Transport and mechanical property evaluation of (AgSbTe){sub 1-x}(GeTe){sub x} (x=0.80, 0.82, 0.85, 0.87, 0.90)

(AgSbTe{sub 2}){sub 1-x}(GeTe){sub x} (known collectively by the acronym of their constituent elements as TAGS-x, where x designates the mole fraction of GeTe) materials, despite being described over 40 years ago, have only recently been studied in greater detail from a fundamental standpoint. We have prepared a series of samples with composition (AgSbTe{sub 2}){sub 1-x}(GeTe){sub x} (x=0.80, 0.82, 0.85, 0.87 and 0.90). Cast ingots of the above compositions were ground and consolidated by spark plasma sintering (SPS). Sintering conditions, specifically high applied pressures of 65 MPa and slow heating rates, were identified as important variables that lead to samples with low porosity and good mechanical strength. The resulting ingots were cut for high temperature electrical, thermal transport and mechanical property evaluation. TAGS-85 was found to have the highest ZT of all samples investigated (ZT=1.36 at 700 K) as a result of its very low value of thermal conductivity. Hall effect measurements performed from 5 to 300 K found these materials to have complex multi-band transport characteristics. - Graphical Abstract: Powder X-ray diffraction of TAGS-x (x=0.80, 0.82, 0.85, 0.87 and 0.90) showing characteristic bifurcation indicative of rhombohedral structure.

36 MATERIALS SCIENCE↗

Solution combustion synthesis of calcium zirconate, CaZrO{sub 3}, powders

Single-phase CaZrO{sub 3} powder was prepared by heating at 300 deg. C an aqueous solution of Ca(NO{sub 3}){sub 2}, ZrO(NO{sub 3}){sub 2} and beta-C{sub 3}H{sub 7}NO{sub 2} (molar ratio=3:3:4). TG-DTA analysis indicated that an intense exothermic reaction occurred at 255 deg. C, which lead to the formation of a voluminous white powder. No additional annealing was required, as pure crystalline CaZrO{sub 3} resulted directly from the combustion reaction. Although no advanced milling was performed, the specific surface area of the powder was 21.5 m{sup 2}/g. The average crystallite size of CaZrO{sub 3} was 23.9 nm. After sintering in air at 1400 deg. C for 2 h, the pellets - shaped by uniaxial pressing at 200 MPa - reached 95% of the theoretical density, had no open pores and were slightly translucent. - Graphical abstract: Single-phase CaZrO{sub 3} powder was prepared by low-temperature combustion synthesis. The resulting powder had a BET area of 21.5 m{sup 2}/g. After sintering at 1400 deg. C for 2 h 95% of the theoretical density was reached.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced thermoelectric performance and novel nanopores in AgSbTe{sub 2} prepared by melt spinning

We report a melt-spinning spark-plasma-sintering synthesis process of the polycrystalline p-type material composed of AgSbTe{sub 2} coarse grains and evenly formed 5-10 nm pores that occur primarily on the surface of matrix grains. The formation mechanism of nanopores and their influences on the thermoelectric properties have been studied and correlated. Microstructure analysis shows that the as-prepared sample can be regarded as a nanocomposite of matrix and in situ generated nanopores evenly coated on matrix grains. For the single-phase component and the possible energy-filter effect caused by the nanopores, the electrical transport properties are improved. Moreover, the thermal conductivity is significantly reduced by strong phonon scattering effect resulted from the nanopores. The thermoelectric performance of the as prepared sample enhances greatly and a ZT of 1.65 at 570 K is achieved, increasing{approx}200% compared with the sample prepared by traditional melt and slow-cooling method. -- Graphical abstract: Representative nanostructure of AgSbTe{sub 2} sample (a) ribbons obtained after melt spinning (b) bulk AgSbTe{sub 2} material obtained after spark plasma sintering. Display Omitted

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of calcination on microscopic and mesoscopic structures in Ca- and Sr-doped nano-crystalline lanthanum chromites

Calcination behavior of nano-crystalline lanthanum chromites doped with calcium and strontium has been probed by Fourier transform infrared spectroscopy, X-ray diffraction and small-angle neutron scattering as a function of temperature. Infrared spectroscopic results imply that over a range of temperatures, some intermediate phase of dopant chromates evolve and then dissolve back, which has also been confirmed by the XRD. Neutron scattering data reveal a fractal type correlation of building blocks in virgin powders. Increase in fractal dimension and reduction in upper cutoff vis-a-vis the densification of agglomerates were found with increasing calcination temperature. Calcination, beyond 900 {sup o}C, results in breaking down of the fractal morphology almost completely. Such shrinkage event also results in a modification of the microscopic structure. These changes have been attributed to the compaction of agglomerates of both Ca- and Sr-doped lanthanum chromites, assisted via liquid state sintering by the melting of the intermediate phases at intermediate calcination stages. -- Graphical Abstract: Dopant chromates evolve as intermediate phases during calcination of Ca- and Sr-doped nano-crystalline lanthanum chromites at intermediate temperatures, around 900 {sup o}C, evident from infrared spectroscopy. Such an event results in a modification of the microscopic and mesoscopic structures. Display Omitted Research highlights: {yields} Meso/microscopic structures of La{sub 0.7}Ca{sub 0.3}CrO{sub 3} and La{sub 0.8}Sr{sub 0.2}CrO{sub 3} modify during calcination. {yields} Transient phases CaCrO{sub 4} and SrCrO{sub 4} appear at intermediate temperatures. {yields} Bond length, unit cell volume, etc. modify as intermediate phases evolve and extinct. {yields} Compaction of the agglomerates takes place due to liquid state assisted sintering.

36 MATERIALS SCIENCE↗

A p → n transition for Sn-doped Cu(In,Ga)Se{sub 2} bulk materials

Cu(In,Ga)Se{sub 2} (CIGSe) pellets at different Sn contents were fabricated by reactive liquid-phase sintering at 600–700 °C with the help of sintering aids of Sb{sub 2}S{sub 3} and Te. Powder preparation was based upon the molecular formula of Cu{sub 0.9}[(In{sub 0.7−x}Sn{sub x}Ga{sub 0.3}){sub 0.9}Sb{sub 0.1}](S{sub 0.15}Te{sub 0.2}Se{sub 1.65}) or Sn-x-CIGSe. Morphology, structure, and electrical property of Sn-doped CIGSe bulks were investigated. The composition of Sn-doped CIGSe is purposely designed for studying the doping effect on the CIGSe performance. The unexpected increase in hole concentration of CIGSe due to the donor doping is rationalized. A controllable n-type semiconductor is deliberately achieved for Sn-0.15-CIGSe and important for making a p/n homojunction in CIGSe solar cells. - Graphical abstract: The controls in defect type and electrical properties of Cu(In,Ga)Se{sub 2} by doping Sn{sup 4+} on the In{sup 3+} site. Highlights: • n-type Sn-CIGSe with n{sub e} of 6.4×10{sup 16} cm{sup −3} and μ{sub e} of 2.3 cm{sup 2}/V s was obtained. • This n-type Sn-CIGSe was obtained by material design and composition control. • The reported n-type CIGSe was obtained from the Zn/CIGSe and CdS/CIGSe bilayers. • Extrinsic donor doping was explored through the results of electrical properties. • A n/p homojunction with Sn-CIGSe and undoped one can be used for solar cell devices.

36 MATERIALS SCIENCE↗