Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shuttle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Lateral stability and control derivatives extracted from space shuttle Challenger flight data

Flight data taken from six flights of the Space Transportation System shuttle Challenger (STS-6, 7, 8, 11, 13 and 17) during atmospheric entry are analyzed to determine the shuttle lateral aerodynamic characteristics. Maximum likelihood estimation is applied to data derived from accelerometer and rate gyro measurements and trajectory, meteorological and control surface data to estimate lateral-directional stability and control derivatives. The vehicle stability and control surface effectiveness are compared across the flights and to preflight predicted values.

Schiess, James R.↗

Verifying shuttle onboard software using expert systems

The Space Shuttle uses a complex set of software to guide, navigate, and control it through all phases of flight. Adding to the complexity is the fact that the software is reconfigured for each flight, i.e., thousands of constants in the software are changed to reflect the unique properties of a given mission. In the last level of tests, the software is flown through end to end nominal and abort scenarios taking the shuttle from liftoff to landing. The analysis of the results of the testing is experience and labor intensive. A set of pass/fail criteria were defined for each test case and in parallel with the knowledge acquisition, tools were developed which allowed the automation of the knowledge being gathered on paper. A prototype of the Analysis Criteria Expert System (ACES) was put into production in the verification of the reconfigured onboard flight software.

Wingert, William B.↗

Space shuttle phase B wind tunnel test database

Archived wind tunnel test data are available for flyback booster or other alternate recoverable configurations as well as reusable orbiters studied during initial development (Phase B) of the Space Shuttle. Considerable wind tunnel data were acquired by competing contractors and NASA centers for an extensive variety of configurations with an array of wing and body planforms. This wind tunnel test data has been compiled into a database and are available for application to current winged flyback or recoverable booster aerodynamic studies. The Space Shuttle Phase B Wind Tunnel Database is structured by vehicle component and configuration type. Basic components include the booster, the orbiter and the launch vehicle. Booster configuration types include straight and delta wings, canard, cylindrical, retro-glide and twin body. Orbiter configuration types include straight and delta wings, lifting body, drop tanks and double delta wings.

Glynn, J. L.↗

In-flight rain damage tests of the shuttle thermal protection system

NASA conducted in-flight rain damage tests of the Shuttle thermal protection system (TPS). Most of the tests were conducted on an F-104 aircraft at the Dryden Flight Research Facility of NASA's Ames Research Center, although some tests were conducted by NOAA on a WP-3D aircraft off the eastern coast of southern Florida. The TPS components tested included LI900 and LI2200 tiles, advanced flexible reusable surface insulation, reinforced carbon-carbon, and an advanced tufi tile. The objective of the test was to define the damage threshold of various thermal protection materials during flight through rain. The test hardware, test technique, and results from both F-104 and WP-3D aircraft are described. Results have shown that damage can occur to the Shuttle TPS during flight in rain.

Meyer, Robert R., Jr.↗

Monitoring biological impacts of space shuttle launches from Vandenberg Air Force Base: Establishment of baseline conditions

Space shuttle launches produce environmental impacts resulting from the formation of an exhaust cloud containing hydrogen chloride aerosols and aluminum oxide particulates. Studies have shown that most impacts occur near-field (within 1.5 km) of the launch site while deposition from launches occurs far-field (as distant as 22 km). In order to establish baseline conditions of vegetation and soils in the areas likely to be impacted by shuttle launches from Vandenberg Air Force Base (VAFB), vegetation and soils in the vicinity of Space Launch Complex-6 (SLC-6) were sampled and a vegetation map prepared. The areas likely to be impacted by launches were determined considering the structure of the launch complex, the prevailing winds, the terrain, and predictions of the Rocket Exhaust Effluent Diffusion Model (REEDM). Fifty vegetation transects were established and sampled in March 1986 and resampled in September 1986. A vegetation map was prepared for six Master Planning maps surrounding SLC-6 using LANDSAT Thematic Mapper imagery as well as color and color infrared aerial photography. Soil samples were collected form the 0 to 7.5 cm layer at all transects in the wet season and at a subsample of the transects in the dry season and analyzed for pH, organic matter, conductivity, cation exchange capacity, exchangeable Ca, Mg, Na, K, and Al, available NH3-N, PO4-P, Cu, Fe, Mn, Zn, and TKN.

Schmaizer, Paul A.↗

Space shuttle phase B wind tunnel model and test information. Volume 2: Orbiter configuration

Archived wind tunnel test data are available for flyback booster or other alternative recoverable configurations as well as reusable orbiters studied during initial development (Phase B) of the Space Shuttle. Considerable wind tunnel data was acquired by the competing contractors and the NASA centers for an extensive variety of configurations with an array of wing and body planforms. All contractor and NASA wind tunnel test data acquired in the Phase B development have been compiled into a data base and are available for applying to current winged flyback or recoverable booster aerodynamic studies. The Space Shuttle Phase B Wind Tunnel Data Base is structured by vehicle component and configuration type. Basic components include the booster, the orbiter, and the launch vehicle. Booster configuration types include straight and delta wings, canard, cylindrical, retro-glide and twin body. Orbiter configuration types include straight and delta wings, lifting body, drop tanks, and double delta wings. Launch configuration types include booster and orbiter components in various stacked and tandem combinations.

Glynn, J. L.↗

Space shuttle phase B wind tunnel model and test information. Volume 2: Orbiter configuration

Archived wind tunnel test data are available for flyback booster or other alternate recoverable configurations as well as reusable orbiters studied during initial development (Phase B) of the Space Shuttle. Considerable wind tunnel data was acquired by the competing contractors and the NASA centers for an extensive variety of configurations with an array of wing and body planforms. All contractor and NASA wind tunnel test data acquiredin the Phase B development have been compiled into a database and are available for applying to current winged flyback or recoverable booster aerodynamic studies. The Space Shuttle Phase B Wind Tunnel Database is structured by vehicle component and configuration type. Basic components include the booster, the orbiter, and the launch vehicle. Booster configuration types include straight and delta wings, canard, cylindrical, retroglide, and twin body. Orbiter configuration types include straight and delta wings, lifting body, drop tanks, and double delta wings. Launch configration types include booster and orbiter components in various stacked and tandom combinations. The digital database consists of 220 files of data containing basic tunnel recorded data.

Glynn, J. L.↗

Space shuttle phase B wind tunnel model and test information. Volume 3: Launch configuration

Archived wind tunnel data are available for flyback booster or other alternative recoverable configurations as well as reusable orbiters studied during initial development (Phase B) of the Space Shuttle. Considerable wind tunnel data was acquired by the competing contractors and the NASA Centers for an extensive variety of configurations with an array of wing and body planforms. All contractor and NASA wind tunnel data acquired in the Phase B development have been compiled into a data base and are available for application to current winged flyback or recoverable booster aerodynamic studies. The Space Shuttle Phase B Wind Tunnel Database is structured by vehicle component and configuration type. Basic components include booster, orbiter and launch vehicle. Booster configuration types include straight and delta wings, canard, cylindrical, retroglide and twin body. Orbital configuration types include straight and delta wings, lifting body, drop tanks and double delta wings. This is Volume 3 (Part 2) of the report -- Launch Configuration -- which includes booster and orbiter components in various stacked and tandem combinations.

Glynn, J. L.↗

Space shuttle phase B wind tunnel model and test information. Volume 1: Booster configuration

Archived wind tunnel test data are available for flyback booster or other alternative recoverable configurations as well as reusable orbiters studied during initial development (Phase B) of the Space Shuttle. Considerable wind tunnel data was acquired by the competing contractors and the NASA Centers for an extensive variety of configurations with an array of wing and body planforms. All contractor and NASA wind tunnel test data acquired in the Phase B development have been compiled into a database and are available for application to current winged flyback or recoverable booster aerodynamic studies. The Space Shuttle Phase B Wind Tunnel Database is structured by vehicle component and configuration type. Basic components include the booster, the orbiter and the launch vehicle. Booster configuration types include straight and delta wings, canard, cylindrical, retroglide and twin body. Orbiter configuration types include straight and delta wings, lifting body, drop tanks, and double delta wings. Launch configurations include booster and orbiter components in various stacked and tandem combinations. This is Volume 1 (Part 1) of the report -- Booster Configuration.

Glynn, J. L.↗

Space shuttle phase B wind tunnel model and test information. Volume 1: Booster configuration

Archived wind tunnel test data are available for flyback booster or other alternative recoverable configurations as well as reusable orbiters studied during initial development (Phase B) of the Space Shuttle. Considerable wind tunnel data was acquired by the competing contractors and the NASA Centers for an extensive variety of configurations with an array of wing and body planforms. All contractor and NASA wind tunnel test data acquired in the Phase B development have been compiled into a database and are available for application to current winged flyback or recoverable booster aerodynamic studies. The Space Shuttle Phase B Wind Tunnel Database is structured by vehicle component and configuration type. Basic components include the booster, the orbiter, and the launch vehicle. Booster configuration types include straight and delta wings, canard, cylindrical, retroglide and twin body. Orbiter configuration types include straight and delta wings, lifting body, drop tanks and double delta wings. Launch configurations include booster and orbiter components in various stacked and tandem combinations. This is Volume 1 (Part 2) of the report -- Booster Configuration.

Glynn, J. L.↗

Research opportunities in microgravity science and applications during Shuttle hiatus

The opportunity to conduct microgravity and related research still exists, even with the temporary delay in the U.S. Space Shuttle program. Several ground-based facilities are available, and use of these facilities is highly recommended for the preparation of near and far term Shuttle or Space Station experiments. Drop tubes, drop towers, aircraft, sounding rockets, and a wide variety of other ground-based equipment can be used to simulate microgravity. This paper concentrates on the materials processing capabilities available at NASA Lewis Research Center (NASA Lewis), Marshall Space Flight Center (MSFC), and the California Institute of Technology Jet Propulsion Laboratory (JPL). Also included is information on gaining access to these facilities.

Rosenthal, Bruce N.↗

The Space Shuttle as a platform for observations of ground-based transmitter signals and whistlers

A preliminary global study of VLF transmitter signals and low-latitude whistlers received at 245 km altitude on the Space Shuttle is presented. The observations were made in a 5-day period during the STS 3 mission in March 1982. Direct signals from a 10-kW transmitter located at 28 deg S magnetic latitude were received in a roughly circular region with a diameter of 6000 km centered around the transmitter. Signals propagating through the magnetosphere from a 500-kW magnetically conjugate transmitter at 40 deg N magnetic latitude were received inside a region extending 5000 km in longitude and 2000 km in latitude. In addition, direct signals from a 1-MW transmitter at 31 deg S magnetic latitude were received in a region extending 22,000 km in longitude, while the latitudinal extent (5000 km) was limited by the Shuttle orbit and the day/night terminator.

Neubert, T.↗

Transitioning from Space Shuttle to Space Station on-orbit servicing

On-orbit satellite servicing has been demonstrated on a variety of missions using the Space Shuttle. This capability is also a stated goal of the Space Station and other unmanned vehicles. Serviceable spacecraft should be able to take advantage of all these servicing facilities. This paper will discuss one effort to document currently available or nearly operational servicing interfaces. Availability of this type of compiled information will assist in a smooth transition from Shuttle-based satellite servicing to servicing at a wider range of locations and by different servicing vehicles.

Hoffman, Stephen J.↗

Development of a cooperative operational rendezvous plan for Eureca and other maneuvering Shuttle payloads

This paper discusses the development of a new class of US Space Shuttle rendezvous missions which involve a maneuvering target vehicle. The objective of the analysis was to develop an operational plan to take advantage of the target spacecraft's maneuvering ability by making it responsible for a portion of the maneuvers necessary to achieve rendezvous. This work resulted in the development of a region in space relative to the Shuttle, called the control box, into which the target vehicle maneuvers. Furthermore, a mission operations plan was developed to implement the control box technique.

Gavin, R. T.↗

The natural background at Shuttle altitudes

In order to make astronomical observations from the Shuttle, the observer needs good information on the intensities and spectral characteristics of various sources. This paper presents a model spectrum for the natural airglow background. The spectrum is modeled over a wavelength range extending from the extreme ultraviolet to the near-infrared. This model is based on the present knowledge of the upper atmosphere. The effect of different viewing configurations is illustrated, together with day-to-night variations. The results synthesized here assume an ideal vehicle in the sense that no contaminant emissions are induced by the Shuttle and payload. These spectra therefore represent a baseline which can be used to locate unanticipated or nonambient features.

Torr, Marsha R.↗

The Shuttle induced background - Gaseous constituents

The gaseous environment around the Shuttle was evaluated by several instruments flown on many Shuttle flights. The major contaminant turned out to be water vapor. The rear thrusters are a major transitory source of water, N2 and/or CO, and possibly NO. Since effluent fluxes are scattered from the atmosphere into instrument faces, the angle of attack is an important variable in the flux levels.

Carignan, G. R.↗

Search for ultraviolet Shuttle glow

In January 1986, the Space Shuttle Columbia carried two ultraviolet experiments (UVX) in an attempt to observe very weak diffuse emission from various astronomical sources at wavelengths below 3200 A with moderate spectral resolution. The experiment attested to the feasibility of low cost astronomy from the Space Shuttle using Get Away Special canisters. Emissions from O2, O, and NO were detected and shown to be consistent with an atmospheric origin.

Tennyson, P. D.↗

Infrared observations of contaminants from Shuttle flight 51-F

A small helium-cooled infrared telescope, IRT, was flown on the Shuttle in July/August 1985. The principal astrophysical objectives were to measure the large scale structure of sources and the background radiation. A cold shutter was incorporated to permit absolute flux measurements. Additionally, the engineering objectives included setting upper limits on the infrared radiation from the local environment. Even though the local background overwhelmed the astrophysical background, astronomical sources were still detectable superimposed on this background radiation. Data are presented covering the spectral range from 2 microns to 120 microns. The spatial, spectral, and temporal variations are described. Based on the spectral character and variability in different wavelength bands, the background radiation does not appear to have a single origin. In this paper, the results on the Shuttle environment are presented.

Koch, D. G.↗