Search NASA⌕ Search

SEARCH · Search NASA

Results for “Statistical modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Convective Transition Statistics over Tropical Oceans for Climate Model Diagnostics: Observational Baseline

Convective transition statistics, which describe the relation between column-integrated water vapor (CWV) and precipitation, are compiled over tropical oceans using satellite and ARM site measurements to quantify the temperature and resolution dependence of the precipitation–CWV relation at fast time scales relevant to convection. At these time scales, and for precipitation especially, uncertainties associated with observational systems must be addressed by examining features with a variety of instrumentation and identifying robust behaviors versus instrument sensitivity at high rain rates. Here the sharp pickup in precipitation as CWV exceeds a certain critical threshold is found to be insensitive to spatial resolution, with convective onset occurring at higher CWV but at lower column relative humidity as bulk tropospheric temperature increases. Mean tropospheric temperature profiles conditioned on precipitation show vertically coherent structure across a wide range of temperature, reaffirming the use of a bulk temperature measure in defining the convective transition statistics. The joint probability distribution of CWV and precipitation develops a peak probability at low precipitation for CWV above critical, with rapidly decreasing probability of high precipitation below and near critical, and exhibits systematic changes under spatial averaging. The precipitation pickup with CWV is reasonably insensitive to time averaging up to several hours but is smoothed at daily time scales. This work demonstrates that CWV relative to critical serves as an effective predictor of precipitation with only minor geographic variations in the tropics, quantifies precipitation-related statistics subject to different spatial–temporal resolution, and provides a baseline for model comparison to apply these statistics as observational constraints on precipitation processes.

54 ENVIRONMENTAL SCIENCES↗

Optimal Strategies for Validating TRMM Rainfall Estimates with Rain-Gauge Data

In spite of all their problems, rain gauges measure rainfall in such a direct way when compared with other methods of estimating rainfall that comparing their totals to satellite estimates remains an essential tool in the validation of satellite products. Some disagreement between averages of satellite data and rain-gauge data is expected because of the very different sampling patterns of the two systems--the satellite provides only occasional snapshots of large areas, whereas rain gauges provide continuous measurements over very small areas. A quantitative estimate of the expected level of disagreement due to the differences in sampling is needed in order for comparisons of the two kinds of averages to be informative. As part of an earlier effort to determine the sampling error of satellite averages, a space-time model for rainfall statistics was developed. Sets of parameter values for the model have been obtained for which the model statistics are found to agree quite well with those of radar data taken over the Atlantic during GATE and the western Pacific during TOGA COARE. Although the model was intended to represent the statistics of relatively large scale fluctuations of rain, it is surprisingly consistent with the very different scales on which rain gauges observe. Implications for maximizing the benefit in comparisons of rain gauge averages and TRMM estimates are derived using the model predictions.

Bell, Thomas L.↗

Modeling Seasonal Sudden Stratospheric Warming Climatology Based on Polar Vortex Statistics

This report explores the climatological frequency distribution of sudden stratospheric warmings (SSWs). General circulation models (GCMs) tend to produce SSW maxima later in winter than observations, which has been considered as a model deficiency. Yet, the observed record is short, calling into question the representativeness of the observational record. To study the seasonality of SSWs and the factors behind it, the authors use observations, a long control simulation with a stratosphere resolving GCM, and also a simple statistical model that is based on the climatological seasonal cycle of the polar vortex winds. From the combined analysis, the authors conclude that the late-winter SSW maximum seen in most climate models is realistic and that observations would also have a late-winter SSW maximum if more data were available. The authors identify the seasonally varying strengths of the polar vortex and stratospheric wave driving as the two main factors behind the seasonal SSW distribution. The statistical model also indicates that there exists a continuum of weak polar vortex states and that SSWs simply form the tail of normally distributed stratospheric winds.

54 ENVIRONMENTAL SCIENCES↗

Flood Susceptibility Mapping Using Machine Learning and Geospatial-Sentinel-1 SAR Integration for Enhanced Early Warning Systems

This study presents a comprehensive framework for flood susceptibility mapping by integrating geospatial factors with both statistical and machine learning models. Thirteen Flood-related factors, including DEM, slope, TWI, NDVI, etc., are extracted as features of models, and historical flood data derived from Sentinel-1 SAR from 2018 to 2023 are used as the target variables of the models. These datasets are analyzed using a frequency-based statistical model and three machine learning models, including Random Forest, XGBoost, and CNN, to generate flood susceptibility maps. The performance of each model is evaluated through AUC; and SHAP scores are separately generated for Machine learning (ML) models to explain each feature contribution in the ML model. The generated susceptibility maps are validated by high-flood-risk locations monitored by flood sensors, BLE inundation models, and flood-prone areas suggested by the Local Community Task Force. The results indicate that the XGBoost model outperforms all other models, with an AUC of 0.92 and demonstrates the highest alignment with recommended high-flood-risk locations, while the frequency-based statistical model showed the weakest performance with an AUC of 0.65. SHAP value graphs highlight the elevation, slope, and TWI as the most influential features across all models. The susceptibility maps generated by the machine learning model show strong agreement with the BLE map and high-flood-risk areas identified by the local Community Task Force.

Google Engine↗

A Stochastic Model of Space-Time Variability of Tropical Rainfall: I. Statistics of Spatial Averages

Global maps of rainfall are of great importance in connection with modeling of the earth s climate. Comparison between the maps of rainfall predicted by computer-generated climate models with observation provides a sensitive test for these models. To make such a comparison, one typically needs the total precipitation amount over a large area, which could be hundreds of kilometers in size over extended periods of time of order days or months. This presents a difficult problem since rain varies greatly from place to place as well as in time. Remote sensing methods using ground radar or satellites detect rain over a large area by essentially taking a series of snapshots at infrequent intervals and indirectly deriving the average rain intensity within a collection of pixels , usually several kilometers in size. They measure area average of rain at a particular instant. Rain gauges, on the other hand, record rain accumulation continuously in time but only over a very small area tens of centimeters across, say, the size of a dinner plate. They measure only a time average at a single location. In making use of either method one needs to fill in the gaps in the observation - either the gaps in the area covered or the gaps in time of observation. This involves using statistical models to obtain information about the rain that is missed from what is actually detected. This paper investigates such a statistical model and validates it with rain data collected over the tropical Western Pacific from ship borne radars during TOGA COARE (Tropical Oceans Global Atmosphere Coupled Ocean-Atmosphere Response Experiment). The model incorporates a number of commonly observed features of rain. While rain varies rapidly with location and time, the variability diminishes when averaged over larger areas or longer periods of time. Moreover, rain is patchy in nature - at any instant on the average only a certain fraction of the observed pixels contain rain. The fraction of area covered by rain decreases, as the size of a pixel becomes smaller. This means that within what looks like a patch of rainy area in a coarse resolution view with larger pixel size, one finds clusters of rainy and dry patches when viewed on a finer scale. The model makes definite predictions about how these and other related statistics depend on the pixel size. These predictions were found to agree well with data. In a subsequent second part of the work we plan to test the model with rain gauge data collected during the TRMM (Tropical Rainfall Measuring Mission) ground validation campaign.

Kundu, Prasun K.↗

Ensuring statistical reproducibility of ocean model simulations in the age of hybrid computing

Novel high performance computing systems that feature hybrid architectures require large scale code refactoring to unravel underlying exploitable parallelism. Such redesign can often be accompanied with machine-precision changes as the order of computation cannot always be maintained. For chaotic systems like climate models, these round-off level differences can grow rapidly. Systematic errors may also manifest initially as machine-precision differences. Isolating genuine round off level differences from such errors remains a challenge. Here, we apply two-sample equality of distribution tests to evaluate statistical reproducibility of the ocean model component of US Department of Energy's Energy Exascale Earth System Model (E3SM). A 2-year control simulation ensemble is compared to a modified ensemble as a test case - after a known non-bit-for-bit change in a model component is introduced - to evaluate the null hypothesis that the two ensembles are statistically indistinguishable. To quantify the false negative rates of these tests, we conduct a formal power analysis using a targeted suite of short simulation ensembles. The ensemble suite contains several perturbed ensembles, each with a progressively different climate than the baseline ensemble - obtained by perturbing the magnitude of a single model tuning parameter, the Gent and McWilliams κ, in a controlled manner. The null hypothesis is evaluated for each of perturbed ensembles using these tests. The power analysis informs on the detection limits of the tests for given ensemble size allowing model developers to evaluate the impact of an introduced non-bit-for-bit change to the model.

Mahajan, Salil↗

Kansas environmental and resource study: A Great Plains model. Extraction of agricultural statistics from ERTS-1 data of Kansas

The author has identified the following significant results. Wheat area, yield, and production statistics as derived from satellite image analysis, combined with a weather model, are presented for a ten county area in southwest Kansas. The data (representing the 1972-73 crop year) are compared for accuracy against both the USDA August estimate and its final (official) tabulation. The area estimates from imagery for both dryland and irrigated winter wheat were within 5% of the official figures for the same area, and predated them by almost one year. Yield on dryland wheat was estimated by the Thompson weather model to within 0.1% of the observed yield. A combined irrigated and dryland wheat production estimate for the ten county area was completed in July, 1973 and was within 1% of the production reported by USDA in February, 1974.

Morain, S. A.↗

Direct statistical simulation of the Lorenz96 system in model reduction approaches

Direct statistical simulation (DSS) of nonlinear dynamical systems bypasses the traditional route of accumulating statistics by lengthy direct numerical simulations by solving the equations that govern the statistics themselves. DSS suffers, however, from the curse of dimensionality as the statistics (such as correlations) generally have higher dimensions than the underlying dynamical variables. Here we investigate two approaches to reduce the dimensionality of DSS, illustrating each method with numerical experiments with the Lorenz96 dynamical system. The forms of DSS chosen here involve approximate closures at second and third order in the equal-time cumulants. We demonstrate significant reduction in computational effort that can be achieved without sacrificing the accuracy of DSS. The methods developed here can be applied to turbulent fluid and magnetohydrodynamical systems. Published by the American Physical Society 2025

Li, Kuan↗

Modelling turbulent flame ignition and blowout

A statistical mixing model incorporating an overall rate equation to describe the fuel oxidation process was developed for studies of ignition and blowout in a combustor primary zone. This zone is treated as a partially stirred reactor whose composition is described by a statistical ensemble of equal mass fluid elements. This ensemble experiences mixing interactions, which represent the turbulent mixing process, at time intervals governed by an empirically determined mixing frequency. Each mixing interaction is computed by ramdomly selecting two different elements which are then allowed to mix completely so that they reach a mean composition depending on their thermodynamic states prior to mixing. The two elements then separate, and the chemical kinetics proceed depending on their new composition and temperature.

Radhakrishnan, K.↗

Infinite statistics condensate as a model of dark matter

In some models, dark matter is considered as a condensate bosonic system. In this paper, we prove that condensation is also possible for particles that obey infinite statistics and derive the critical condensation temperature. We argue that a condensed state of a gas of very weakly interacting particles obeying infinite statistics could be considered as a consistent model of dark matter.

79 ASTRONOMY AND ASTROPHYSICS↗

Statistical Hauser-Feshbach model calculation for (α, n) reaction cross section and discrete level population

We calculate the α-particle induced reactions on 17,18 O, 19 F, and 23 Na, in the energy range 0 ≤ E α ≤ 10 MeV, with a particular attention to the branching ratios of populated discrete levels in the (α,n) channels. Since there are too many open channels to employ the R-matrix theory, we apply the statistical Hauser-Feshbach model to calculate these reaction cross sections and branching ratios. The branching ratio is defined as b n = $\frac{σ_n}{Σ_iσ_i + σ_c}$ , where σ n is the n-th level production cross section after the neutron emission, and σ c is the production of the continuum state. In the cases of our target nuclei and the energy range of interest, the residual nuclei of the neutron emission channel are always in their discrete states, so that σ c can be negligible.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Uncertainty Propagation in Coupled Atmosphere–Wave–Ocean Prediction System: A Study of Hurricane Earl (2010)

This study focuses on understanding the evolution of Hurricane Earl (2010) with respect to random perturbations in the storm’s initial strength, size, and asymmetry in wind distribution. We rely on the Unified Wave Interface-Coupled Model (UWIN-CM), a fully coupled atmosphere–wave–ocean system to generate a storm realization ensemble, and use polynomial chaos (PC) expansions to build surrogate models for time evolution of both the maximum wind speed and minimum sea level pressure in Earl. The resulting PC surrogate models provide statistical insights on probability distributions of model responses throughout the simulation time span. Statistical analysis of rapid intensification (RI) suggests that initial perturbations having intensified and counterclockwise-rotated winds are more likely to undergo RI. In addition, for the range of initial conditions considered RI seems mostly sensitive to azimuthally averaged maximum wind speed and asymmetry orientation, rather than storm size and asymmetry magnitude; this is consistent with global sensitivity analysis of PC surrogate models. Finally, we combine initial condition perturbations with a stochastic kinetic energy backscatter scheme (SKEBS) forcing in the UWIN-CM simulations and conclude that the storm tracks are substantially influenced by the SKEBS forcing perturbations, whereas the perturbations in initial conditions alone had only limited impact on the storm-track forecast.

54 ENVIRONMENTAL SCIENCES↗

A Method for Modeling Household Occupant Behavior to Simulate Residential Energy Consumption

This paper presents a statistical method for modeling the behavior of household occupants to estimate residential energy consumption. Using data gathered by the U.S. Census Bureau in the American Time Use Survey (ATUS), actions carried out by survey respondents are categorized into ten distinct activities. These activities are defined to correspond to the major energy consuming loads commonly found within the residential sector. Next, time varying minute resolution Markov chain based statistical models of different occupant types are developed. Using these behavioral models, individual occupants are simulated to show how an occupant interacts with the major residential energy consuming loads throughout the day. From these simulations, the minimum number of occupants, and consequently the minimum number of multiple occupant households, needing to be simulated to produce a statistically accurate representation of aggregate residential behavior can be determined. Finally, future work will involve the use of these occupant models along side residential load models to produce a high-resolution energy consumption profile and estimate the potential for demand response from residential loads.

American Time Use Survey↗

Statistical and machine learning models for optimizing energy in parallel applications

Rising power costs and constraints are driving a growing focus on the energy efficiency of high performance computing systems. The unique characteristics of a particular system and workload and their effect on performance and energy efficiency are typically difficult for application users to assess and to control. Settings for optimum performance and energy efficiency can also diverge, so we need to identify trade-off options that guide a suitable balance between energy use and performance. We present statistical and machine learning models that only require a small number of runs to make accurate Pareto-optimal trade-off predictions using parameters that users can control. We study model training and validation using several parallel kernels and more complex workloads, including Algebraic Multigrid (AMG), Large-scale Atomic Molecular Massively Parallel Simulator, and Livermore Unstructured Lagrangian Explicit Shock Hydrodynamics. Here, we demonstrate that we can train the models using as few as 12 runs, with prediction error of less than 10%. Our AMG results identify trade-off options that provide up to 45% improvement in energy efficiency for around 10% performance loss. We reduce the sample measurement time required for AMG by 90%, from 13 h to 74 min.

97 MATHEMATICS AND COMPUTING↗

Renormalized site density functional theory for models of ion hydration

Development of accurate statistical mechanics models of molecular liquid systems is a problem of great practical and fundamental importance. Site-density functional theory (SDFT) is one of the promising directions in this area, but its success hinges upon the ability to efficiently reconcile co-existence of two distinct intra- and inter-molecular interaction regimes in a molecular liquid. Renormalized formulation of site-density functional theory (RSDFT), that we have recently developed, resolves this problem by introducing an additional potential field variable that decouples two interaction scales and maps the molecular liquid problem onto the effective simple liquid mixture. This work provides a critical assessment of RSDFT for the hydrated ion system - a problem, which historically has always been one of the most difficult cases for SDFT applications. Using two-site model of water, we perform a comprehensive analysis of hydrated alkali metal and halogen ions, including both structural and free energy based characteristics. The results indicate that RSDFT provides a significant improvement over conventional 3D-RISM implementations, and may prove useful in coarse grained simulations based on two-site solvent models.

Chuev, Gennady N.↗

Turbulence modeling

Recent developments at several levels of statistical turbulence modeling applicable to aerodynamics are briefly surveyed. Emphasis is on examples of model improvements for transonic, two-dimensional flows. Experience with the development of these improved models is cited to suggest methods of accelerating the modeling process necessary to keep abreast of the rapid movement of computational fluid dynamics into the computation of complex three-dimensional flows.

Rubesin, Morris W.↗

Turbulence modeling for aerodynamic flows

The state of statistical turbulence modeling is reviewed with emphasis on compressible aerodynamic flows. A three-stage modeling process is suggested to act as a frame-work for improving turbulence models for complex flows. This process is then used to guide assessments of the comparative performance of various levels of turbulence models for several examples of flow fields of aerodynamic interest. The examples cover flows in two and three dimensions and with a broad range of Mach numbers. In addition to considerations of individual flow fields, some generalizations are drawn from the aggregate behavior of the comparisons.

Rubesin, Morris W.↗