Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural Effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Gamma Radiation Effects on Physical, Optical, and Structural Properties of Binary As-S glasses

Gamma radiation induces changes in physical, optical, and structural properties in chalcogenide glasses., Previous research has focused on As{sub 2}S{sub 3} and families of glasses containing Ge. For the first time, we present composition and dose dependent data on the As-S binary glass series. Binary As{sub x}S{sub 100-x} (x = 30, 33, 36, 40, and 42) glasses were irradiated with gamma radiation using a {sup 60}Co source at 2.8 Gy/s to accumulated doses of 1, 2, 3, and 4 MGy. The irradiated samples were characterized at each dose level for density, refractive index, x-ray diffraction, and Raman spectrum. These results are compared to those of as-made and 1 year aged samples. We report an initial increase in density followed by a decrease as a function of dose that contradicts the expected compositional dependence of molar volume of these glasses. This unusual behavior is explained based on microvoid formation and nanoscale phase-separation induced by the irradiation in these glasses. XRD, Raman, and EPR data provide supporting evidence, underscoring the importance of optimally- or overly-constrained structures for stability under aging or irradiation.

36 MATERIALS SCIENCE↗

Manipulating efficient light emission in two-dimensional perovskite crystals by pressure-induced anisotropic deformation

The hybrid nature and soft lattice of organolead halide perovskites render their structural changes and optical properties susceptible to external driving forces such as temperature and pressure, remarkably different from conventional semiconductors. Here, we investigate the pressure-induced optical response of a typical two-dimensional perovskite crystal, phenylethylamine lead iodide. At a moderate pressure within 3.5 GPa, its photoluminescence red-shifts continuously, exhibiting an ultrabroad energy tunability range up to 320 meV in the visible spectrum, with quantum yield remaining nearly constant. First-principles calculations suggest that an out-of-plane quasi-uniaxial compression occurs under a hydrostatic pressure, while the energy is absorbed by the reversible and elastic tilting of the benzene rings within the long-chain ligands. This anisotropic structural deformation effectively modulates the quantum confinement effect by 250 meV via barrier height lowering. The broad tunability within a relatively low pressure range will expand optoelectronic applications to a new paradigm with pressure as a tuning knob.

36 MATERIALS SCIENCE↗

Chloride capture using a C–H hydrogen bonding cage

Tight binding and high selectivity are hallmarks of biomolecular recognition. Achieving these behaviors with synthetic receptors has usually been associated with OH and NH hydrogen bonding. Contrary to this conventional wisdom, we designed a chloride-selective receptor in the form of a cryptand-like cage using only CH hydrogen bonding. Crystallography demonstrated chloride stabilized by six short 2.7-Å hydrogen bonds originating from the cage’s six 1,2,3-triazoles. Atto-molar affinity (10 17 M –1 ) was determined using liquid- liquid extractions of chloride from water into nonpolar dichloromethane solvents. Controls verified the additional role of triazoles in rigidifying the 3D structure to effect recognition affinity and selectivity: Cl – > Br – > NO 3 – > I – . This cage reflects anti-Hofmeister salt extraction and preliminary corrosion inhibition.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effect of polymer matrix on structure of Se particles formed in aqueous solutions during redox process

Transmission electron microscopy and X-ray energy dispersive microanalysis study of the structure of particles formed during the reduction of Se(IV) to Se(0) in aqueous solutions in the presence of amphiphilic polymers showed the formation of Se/polymer composite particles. The content of carbon inside the particles can be as large as 80 at %. Polymers deeply influence the structure of particles. Depending on polymers, the composite particles may be unstable with time and they spontaneously evolve from Se/polymer composite particles to crystalline particles of monoclinic Se. For the stable ones, addition of bacterial cellulose Acetobacter xylinum gel-film can induce crystallization in the particles which expel the polymeric material. The Se/polymer composite particles and Se crystalline particles exhibit different sensitivity to electron irradiation and stiffness.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Elastic properties of crystalline and liquid gallium at high pressures

The elastic properties of gallium, such as the bulk modulus B, the shear modulus G, and the Poisson's ratio {sigma}, are investigated and the relative change in the volume is determined in the stability regions of the Ga I, Ga II, and liquid phases at pressures of up to 1.7 GPa. The observed lines of the Ga I-Ga II phase transition and the melting curves of the Ga I and Ga II phases are in good agreement with the known phase diagram of gallium; in this case, the coordinates of the Ga I-Ga II-melt triple point are determined to be 1.24 {+-} 0.40 GPa and 277 {+-} 2 K. It is shown that the Ga I-Ga II phase transition is accompanied by a considerable decrease in the moduli B (by 30%) and G (by 55%) and an increase in the density by 5.7%. The Poisson's ratio exhibits a jump from typically covalent values of approximately 0.22-0.25 to values of approximately 0.32-0.33, which are characteristic of metals. The observed behavior of the elastic characteristics is described in the framework of the model of the phase transition from a 'quasi-molecular' (partially covalent) metal state to a 'normal' metal state. An increase in the Poisson's ratio in the Ga I phase from 0.22 to 0.25 with an increase in the pressure can be interpreted as a decrease in the degree of covalence, i.e., the degree of spatial anisotropy of the electron density along the bonds, whereas the large value of the pressure derivative of the bulk modulus (equal to approximately 8) observed up to the transition to the Ga II phase or the melt is associated not only with the quasicovalent nature of the Ga I phase but also with the structural features. In view of the presence of seven neighbors for each gallium atom in the Ga I phase, the gallium lattice can be treated as a structure intermediate between typical open-packed and close-packed structures. Premelting effects, such as a flattening of the isothermal dependence of the shear modulus G(p) with increasing pressure and an increase in the slope of the isobaric dependences G(T) with increasing temperature, are revealed in the vicinity of the melting curve. The bulk modulus of liquid gallium near the melting curve proves to be rather close to the corresponding values for the normal metal Ga II.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of polarization on the structure of electromagnetic field and spatiotemporal distribution of e{sup +}e{sup –} pairs generated by colliding laser pulses

We have studied the production of electron–positron pairs due to polarization of vacuum in the presence of the strong electromagnetic field of two counterpropagating laser pulses. The structure of the electromagnetic field with the circular polarization has been determined using the 3D model of focused laser pulses, which was proposed by Narozhny and Fofanov. Analytic calculations have shown that the electric and magnetic fields are almost parallel to each other in the focal region when the laser pulses are completely transverse in the electric (E-wave) or magnetic (H-wave) field. On the other hand, the electric and magnetic fields are almost orthogonal when laser pulses consist of a mixture of E- and H-waves of the same amplitude. It has been found that although the latter configuration of colliding laser pulses has a much higher pair production threshold, it can generate much shorter electron–positron pulses as compared to the former configuration. The dependence of the production efficiency of pairs and their spatiotemporal distribution on the polarization of laser pulses has been analyzed using the structure of the electromagnetic field in the focal plane.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dislocation model of nucleation and development of slip bands and their effect on service life of structural materials subject to cyclic loading

Most of the destructions of machine parts are of fatigue character. Under cyclic loading, the surface layer, in which hardening–softening processes rapidly occur, is formed almost at once after its beginning. The interaction of plastic-deformation traces with each other and with other structural elements, such as grains, results in the formation of a characteristic microstructure of the machine-part surface subject to cyclic loadings. The character of accumulation of slip bands and their shape (narrow, wide, twisting, and broken) depends on the conditions under which (under what factors) the cyclic loading occurs. The fatigue-resistance index expressed in terms of the slope of left portion of the fatigue curve linearized in logarithmic coordinates also depends on the set of relevant factors. The dependence of the surface damageability on the fatigue resistance index makes it possible to implement the method of predicting the fatigue curve by the description of the factors acting on a detail or construction. The position of the inflection point on the curve in the highcycle fatigue region (the endurance limit and the number of loading cycles, the ordinate and abscissa of the inflection point on the fatigue curve, respectively) also depends on the set of relevant factors. In combination with the previously obtained value of the slope of the left portion of the curve in the high-cycle fatigue region, this makes it possible to construct an a priori fatigue curve, thus reducing the scope of required fatigue tests and, hence, high expenses because of their long duration and high cost. The scope of tests upon using the developed method of prediction may be reduced to a minimum of one or two samples at the predicted level of the endurance limit.

36 MATERIALS SCIENCE↗

Space-charge-limited currents in an Se{sub 95}As{sub 5} chalcogenide glass-like semiconductor system containing EuF{sub 3} impurities

It is established that charge carrier (hole) transport in the Al-Se{sub 95}As{sub 5} Left-Pointing-Angle-Bracket EuF{sub 3} Right-Pointing-Angle-Bracket -Te structure is effected by unipolar injection currents limited by space charges with the involvement of two capture trap groups. Shallow traps corresponding to charged intrinsic defects C{sub 1}{sup -} are related to broken selenium bonds. Deep traps corresponding to charged intrinsic defects P{sub 2}{sup -} are formed by arsenic atoms with broken coordination. It is shown that the EuF{sub 3} impurity strongly affects the concentration of the capture traps, especially those localized near the Fermi level.

36 MATERIALS SCIENCE↗

Effect of dislocations on the structural order parameter in a crystal upon torsional strain

The interaction of the structural subsystem with dislocations upon applying an elastic torsional strain has been studied. The consideration is performed in the terms of the Landau phenomenological theory with the refusal from the approximation that the irreducible vector magnitudes are constant. It is shown that additional spatial amplitude and frequency oscillations related to the change in the magnitudes of the structural order parameter and the dislocation density appear.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superallowed Nuclear Beta Decays and Precision Tests of the Standard Model

For many decades, the main source of information on the top-left corner element of the Cabibbo–Kobayashi–Maskawa quark mixing matrix, V ud , was superallowed nuclear β decays with an impressive 0.01% precision. This precision, apart from experimental data, relies on theoretical calculations in which nuclear structure–dependent effects and uncertainties play a prime role. This review is dedicated to a thorough reassessment of all ingredients that enter the extraction of the value of V ud from experimental data. We try to keep balance between historical retrospect and new developments, many of which occurred in just the past 5 years. They have not yet been reviewed in a complete manner, not least because new results are forthcoming. This review aims to fill this gap and offers an in-depth yet accessible summary of all recent developments.

ab initio methods↗

Thermoelectric Properties of 2D Ni 3 (HITP) 2 and 3D Cu 3 (BTC) 2 MOFs: First-Principles Studies

Metal organic frameworks (MOFs) have recently attracted great attentions for the thermoelectric (TE) applications, owing to their intrinsic low thermal conductivity, but their TE efficiencies are still low due to the poor electronic transport properties. Here, various synthetic strategies have been designed to optimize the electronic properties of MOFs. Using a series of first principle calculations and band theory, we explore the effect of structural topology and redox matching between the metal and coordinated atoms on the TE transport properties. In conclusion, the presented results provide a fundamental guidance for optimizing electronic charge transport of existing MOFs, and for designing yet to be discovered conductive MOFs for thermoelectric applications.

36 MATERIALS SCIENCE↗

Research Needs for Wind Resource Characterization

As energy demand increases, the need to reach beyond traditional hydrocarbon-based sources of power is becoming ever more clear, in tandem with a compelling need to reduce emissions of greenhouse gases. Despite significant wind resources, the U.S. currently obtains about one percent of its electric power from wind generation. A recent analysis by the U.S. Department of Energy (DOE), the National Renewable Energy Laboratory NREL), and the American Wind Energy Association demonstrated the technical feasibility of expanding the U.S. wind industry to meet 20% of U.S. electric power needs by 2030 (U.S. DOE 2008). Many of the challenges associated with a substantial increase in the use of wind energy reflect fundamental gaps that remain in our knowledge of both atmospheric flow and the interaction of that flow with turbines. To better define these gaps, the U.S. Department of Energy (DOE) convened a workshop on Research Needs for Wind Resource Characterization in Broomfield, Colorado, during January 14–16, 2008. The workshop was organized jointly by DOE’s Office of Science and Office of Energy Efficiency and Renewable Energy. The purposes of the workshop were to assess the current state-of-science related to wind power production and to define fruitful directions for research. More than 120 international participants, representing national laboratories, academia, and the wind energy industry, attended the workshop. The workshop focused on four potential research areas ordered by the scale of associated atmospheric phenomena: 1) turbine dynamics, 2) micrositing and array effects, 3) mesoscale processes, and (4) climate effects. The structure of the workshop involved a plenary speaker to review each of these areas followed by a discussion of each area by all participants. Based on this discussion, participants then generated recommendations for research in each of the areas. The remainder of this report summarizes the reviews provided by each of the plenary speakers and the research recommendations produced by the workshop.

14 SOLAR ENERGY↗

Extracting information from X-ray diffraction patterns containing Laue oscillations

The presence of Laue oscillations in a film grown on a solid surface is broadly taken as indicating a high quality, crystallographically aligned film of the targeted compound. In this paper we briefly review the origins of both Laue oscillations and Kiessig fringes and show how they can be used together to determine if extra thickness exists above or below the coherently diffracting domains. The differences between experimental and “ideal” films are discussed and the effect of structural features (roughness, different thickness coherently diffracting domains and thickness in addition to the coherently diffracting domains) are illustrated with experimental and simulated data for metal and mixed-metal chalcogenide films of titanium, bismuth, vanadium/iron, and bismuth/molybdenum. Examples are given showing how quantitative information can be extracted from experimental diffraction patterns.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of hydride precipitation on the corrosion kinetics of Zircaloy-4: effect of the nano-structure and grain boundary properties of the zirconium oxide layer on oxygen diffusion flux - 2016-0073

Hydride precipitation at the oxide-metal interface is frequently proposed as causing the corrosion acceleration of Zircaloy-4 at high burnup in pressurized water reactors (PWRs). In order to identify the local mechanisms possibly involved, we studied the nano-structure of oxides formed on massive zirconium hydrides and reference Zircaloy-4 with an innovative grain mapping technique with the use of transmission electron microscopy (TEM). In autoclave PWR-conditions, the presence of a precipitated hydride phase, previously formed by a cathodic charging technique at the surface of Zircaloy-4, clearly increased the corrosion rate, and a higher oxygen diffusion flux along oxide grain boundaries is observed compared with the reference Zircaloy-4. The texture, grain size, and adjacent grain misorientation in the oxide layer were studied in detail along the direction of the oxide growth using an automated crystal orientation mapping technique associated with TEM for both pre-hydrided and reference Zircaloy-4 samples. The texture in the growth direction is similar on pre-hydrided and reference samples, but the grain-to-grain mis-orientations showed differences. Indeed, on the pre-hydrided sample, the misorientation of 90 deg. C with respect to the [001] monoclinic axis is less probable than in the reference oxide, and more mis-orientations of 50-70 deg. C and 120-150 deg. C, corresponding to larger mismatches between neighboring grain boundaries, are observed. A smaller average diameter of the columnar monoclinic grains is also clearly revealed for the oxide grown on the pre-hydrided sample that leads to a larger number of diffusion paths for oxidizing species. These results are discussed and used for simulating oxygen diffusion flux through the polycrystalline microstructure of the oxide layer as a function of the grain size. (authors)

36 MATERIALS SCIENCE↗

Nanostructured cerium oxide: preparation, characterization, and application in energy and environmental catalysis

Nanostructured cerium oxide (CeO 2 ) with outstanding physical and chemical properties has attracted extensive interests over the past few decades in environment and energy-related applications. With controllable synthesis of nanostructured CeO 2 , much more features were technologically brought out from defect chemistry to structure-derived effects. This paper highlights recent progress on the synthesis and characterization of nanostructured ceria-based materials as well as the traditional and new applications. Specifically, several typical applications based on the desired ceria nanostructures are focused to showcase the importance of nanostructure-derived effects. Moreover, some challenges and perspectives on the nanostructured ceria are presented, such as defects controlling and retainment, scale-up fabrication, and monolithic devices. Hopefully, this paper can provide an improved understanding of nanostructured CeO 2 and offer new opportunities to promote the further research and applications in the future.

36 MATERIALS SCIENCE↗