Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structured Programming”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

CELSS scenario analysis: Breakeven calculations

A model of the relative mass requirements of food production components in a controlled ecological life support system (CELSS) based on regenerative concepts is described. Included are a discussion of model scope, structure, and example calculations. Computer programs for cultivar and breakeven calculations are also included.

Mason, R. M.↗

Eigenspace techniques for active flutter suppression

Mathematical models to be used in the control system design were developed. A computer program, which takes aerodynamic and structural data for the ARW-2 aircraft and converts these data into state space models suitable for use in modern control synthesis procedures, was developed. Reduced order models of inboard and outboard control surface actuator dynamics and a second order vertical wind gust model were developed. An analysis of the rigid body motion of the ARW-2 was conducted. The deletion of the aerodynamic lag states in the rigid body modes resulted in more accurate values for the eigenvalues associated with the plunge and pitch modes than were obtainable if the lag states were retained.

Garrard, W. L.↗

Experiences with explicit finite-difference schemes for complex fluid dynamics problems on STAR-100 and CYBER-203 computers

Several two- and three-dimensional external and internal flow problems solved on the STAR-100 and CYBER-203 vector processing computers are described. The flow field was described by the full Navier-Stokes equations which were then solved by explicit finite-difference algorithms. Problem results and computer system requirements are presented. Program organization and data base structure for three-dimensional computer codes which will eliminate or improve on page faulting, are discussed. Storage requirements for three-dimensional codes are reduced by calculating transformation metric data in each step. As a result, in-core grid points were increased in number by 50% to 150,000, with a 10% execution time increase. An assessment of current and future machine requirements shows that even on the CYBER-205 computer only a few problems can be solved realistically. Estimates reveal that the present situation is more storage limited than compute rate limited, but advancements in both storage and speed are essential to realistically calculate three-dimensional flow.

Kumar, A.↗

Predicting Noise in Complex Aircraft Structures

Technique combines theoretical and empirical aspects of structural components. Experimental and analytical program produces test and analysis procedures for predicting extent of noise generated in aircraft. Purpose of program to develop ways of screening candidate materials considered for noise control and establish test procedures for verifying choice of particular control measure.

Unruh, J. F.↗

The NASTRAN theoretical manual

Designed to accommodate additions and modifications, this commentary on NASTRAN describes the problem solving capabilities of the program in a narrative fashion and presents developments of the analytical and numerical procedures that underlie the program. Seventeen major sections and numerous subsections cover; the organizational aspects of the program, utility matrix routines, static structural analysis, heat transfer, dynamic structural analysis, computer graphics, special structural modeling techniques, error analysis, interaction between structures and fluids, and aeroelastic analysis.

Source record↗

SSME lifetime prediction and verification, integrating environments, structures, materials: The challenge

The planned missions for the space shuttle dictated a unique and technology-extending rocket engine. The high specific impulse requirements in conjunction with a 55-mission lifetime, plus volume and weight constraints, produced unique structural design, manufacturing, and verification requirements. Operations from Earth to orbit produce severe dynamic environments, which couple with the extreme pressure and thermal environments associated with the high performance, creating large low cycle loads and high alternating stresses above endurance limit which result in high sensitivity to alternating stresses. Combining all of these effects resulted in the requirements for exotic materials, which are more susceptible to manufacturing problems, and the use of an all-welded structure. The challenge of integrating environments, dynamics, structures, and materials into a verified SSME structure is discussed. The verification program and developmental flight results are included. The first six shuttle flights had engine performance as predicted with no failures. The engine system has met the basic design challenges.

Ryan, R. S.↗

Ada developments

Worldwide developments around the programming language Ada are discussed. Structuring and data structures in the Ada subset are described.

Vankatwijk, J.↗

A compact Dopplergraph/magnetograph suitable for space-based measurements of solar oscillations and magnetic fields

A compact Dopplergraph/magnetograph placed in a continuous solar-viewing orbit will allow us to make major advancements in our understanding of solar internal structure and dynamics. An international program is currently being conducted at JPL and Mt. Wilson to develop such an instrument. By combining a unique magneto-optical resonance filter with CID and CCD cameras we have been able to obtain full- and partial-disk Dopplergrams and magnetograms. Time series of the velocity images are converted into k-omega power spectra which show clear- the solar nonradial p-mode oscilations. Magnetograms suitable for studying the long-term evolution of solar active regions have also been obtained with this instrument. A flight instrument based on this concept is being studied for possible inclusion in the SOHO mission.

Rhodes, E. J., Jr.↗

High-resolution surface photometry of elliptical galaxies

High-resolution CCD surface photometry profiles have been obtained for a sample of 42 nearby elliptical and SO galaxies as a first step in a program to investigate their central structure and core properties. A comparison of the present profiles to those of other observers shows that the accuracy of the central surface brightnesses is to better than 0.02 mag rms. Central resolution is limited by the atmospheric seeing PSF which is measured for each profile. A hybrid Fourier deconvolution procedure has been developed to correct the surface photometry for seeing in a model-independent way. Tests of the procedure on simulated galaxy images show that intrinsic core radii equal to the seeing FWHM or larger can be recovered from the observations. Application of the deconvolution procedure to the observed galaxies yields surface photometry profiles of slightly sub-arc second resolution.

Lauer, T. R.↗

Optimized Bolted Joint

Computer technique aids joint optimization. Load-sharing between fasteners in multirow bolted composite joints computed by nonlinear-analysis computer program. Input to analysis was load-deflection data from 180 specimens tested as part of program to develop technology of structural joints for advanced transport aircraft. Bolt design optimization technique applicable to major joints in composite materials for primary and secondary structures and generally applicable for metal joints as well.

Hart-Smith, L. J.↗

An interactive editor for definition of touch-sensitive zones for a graphic display

In the continuing effort to develop more efficient man-machine communications methods, touch displays have shown potential as straightforward input systems. The development of software necessary to handle such systems, however, can become tedious. In order to reduce the need for redundant programming, a touch editor has been developed which allows a programmer to interactively define touch-sensitive areas for a graphic display. The information produced during the editing process is written to a data file, which can be accessed easily when needed by an application program. This paper outlines the structure, logic, and use of the editor, as well as the hardware with which it is presently compatible.

Monroe, Burt L., III↗

Mobile satellite communications technology - A summary of NASA activities

Studies in recent years indicate that future high-capacity mobile satellite systems are viable only if certain high-risk enabling technologies are developed. Accordingly, NASA has structured an advanced technology development program aimed at efficient utilization of orbit, spectrum, and power. Over the last two years, studies have concentrated on developing concepts and identifying cost drivers and other issues associated with the major technical areas of emphasis: vehicle antennas, speech compression, bandwidth-efficient digital modems, network architecture, mobile satellite channel characterization, and selected space segment technology. The program is now entering the next phase - breadboarding, development, and field experimentation.

Dutzi, E. J.↗

Study on utilization of advanced composites in fuselage structures of large transports

The potential for utilizing advanced composites in fuselage structures of large transports was assessed. Six fuselage design concepts were selected and evaluated in terms of structural performance, weight, and manufacturing development and costs. Two concepts were selected that merit further consideration for composite fuselage application. These concepts are: (1) a full depth honeycomb design with no stringers, and (2) an I section stringer stiffened laminate skin design. Weight reductions due to applying composites to the fuselages of commercial and military transports were calculated. The benefits of applying composites to a fleet of military transports were determined. Significant technology issues pertinent to composite fuselage structures were identified and evaluated. Program plans for resolving the technology issues were developed.

Johnson, R. W.↗

Modal forced response of propfans in yawed flow

A modal forced response method for propfans in yawed flow is presented. This capability exists in the Aeroelastic Stability and Response of Propfan (ASTROP3) code developed at the Lewis Research Center. The code uses three-dimensional steady and unsteady cascade aerodynamics by Williams and Hwang (1986) and a NASTRAN finite element model to represent the blade structure. In addition, many utility programs exist in ASTROP3 that help in both the preprocessing of the NASTRAN model and the postprocessing of modal response results. The postprocessing work that computes the blade vibratory displacements and stresses in yawed flow are highlighted here.

Narayanan, G. V.↗

Sizing and shape design sensitivity analysis using a hybrid finite element code

The practical (software) implementation of the theoretical FEM-based design sensitivity analysis method of Haug et al. (1986) is described and demonstrated. The fundamental principles of the method are reviewed; the problems involved in applying it to the Engineering Analysis Language (EAL) hybrid FEM code (Whetstone, 1983) are discussed; the formulations for beams, plate bending, and built-up structures are given in detail; programming aspects are considered; and numerical results for sample problems are presented in extensive tables. It is shown that the use of a data-base management system with an FEM such as EAL makes it possible to obtain accurate sizing and shape design sensitivity information using only one program with one data base.

Dopker, Bernhard↗

General specifications for the development of a PC-based simulator of the NASA RECON system

The general specifications for the design and implementation of an IBM PC/XT-based simulator of the NASA RECON system, including record designs, file structure designs, command language analysis, program design issues, error recovery considerations, and usage monitoring facilities are discussed. Once implemented, such a simulator will be utilized to evaluate the effectiveness of simulated information system access in addition to actual system usage as part of the total educational programs being developed within the NASA contract.

Dominick, Wayne D.↗

Recent developments in large-scale structural optimization

A brief discussion is given of mathematical optimization and the motivation for the development of more recent numerical search procedures. A review of recent developments and issues in multidisciplinary optimization is also presented. These developments are discussed in the context of the preliminary design of aircraft structures. A capability description of programs FASTOP, TSO, STARS, LAGRANGE, ELFINI and ASTROS is included.

Venkayya, Vipperla B.↗

Research and technology plans for FY 1989 and accomplishments for FY 1988

The Objectives, FY 1989 Plans, Approach, and FY 1989 Milestones for the Structural Mechanics Division's research programs are presented. Fiscal year 1988 Accomplishments are presented where applicable. This information is useful in program coordination with other governmental organizations in areas of mutual interest.

Bales, Kay S.↗