Search NASA⌕ Search

SEARCH · Search NASA

Results for “Two Phase Flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

SOLAR MERIDIONAL FLOW IN THE SHALLOW INTERIOR DURING THE RISING PHASE OF CYCLE 24

Solar subsurface zonal- and meridional-flow profiles during the rising phase of solar cycle 24 are studied using the time-distance helioseismology technique. The faster zonal bands in the torsional-oscillation pattern show strong hemispheric asymmetries and temporal variations in both width and speed. The faster band in the northern hemisphere is located closer to the equator than the band in the southern hemisphere and migrates past the equator when the magnetic activity in the southern hemisphere is reaching maximum. The meridional-flow speed decreases substantially with the increase of magnetic activity, and the flow profile shows two zonal structures in each hemisphere. The residual meridional flow, after subtracting a mean meridional-flow profile, converges toward the activity belts and shows faster and slower bands like the torsional-oscillation pattern. More interestingly, the meridional-flow speed above latitude 30° shows an anti-correlation with the poleward-transporting magnetic flux, slower when the following-polarity flux is transported and faster when the leading-polarity flux is transported. It is expected that this phenomenon slows the process of magnetic cancellation and polarity reversal in high-latitude areas.

79 ASTRONOMY AND ASTROPHYSICS↗

A Novel Slurry-Based Biomass Reforming Process Final Technical Report

This project was focused on developing a catalytic means of producing H2 from raw, ground biomass, such as fast growing poplar trees, willow trees, or switch grass. The use of a renewable, biomass feedstock with minimal processing can enable a carbon neutral means of producing H2 in that the carbon dioxide produced from the process can be used in the environment to produce additional biomass. For economically viable production of H2, the biomass is hydrolyzed and then reformed without any additional purification steps. Any unreacted biomass and other byproduct streams are burned to provide process energy. Thus, the development of a catalyst that can operate in the demanding corrosive environment and presence of potential poisons is vital to this approach. The concept for this project is shown in Figure 1. The initial feed is assumed to be a >5 wt% slurry of ground wood in dilute base, such as potassium carbonate (K2CO3). Base hydrolysis and reforming of the wood is carried out at high but sub-critical pressures and temperatures in the presence of a solid catalyst. A Pd alloy membrane allows the continuous removal of pure , while the retentate, including methane is used as fuel in the plant. The project showed that it is possible to economically produce H2 from woody biomass in a carbon neutral manner. Technoeconomic analyses using HYSYS and the DOE's H2A tool [1] were used to design a 2000 ton day-1 (dry basis) biomass to hydrogen plant with an efficiency of 46% to 56%, depending on the mode of operation and economic assumptions, exceeding the DOE 2012 target of 43%. The cost of producing the hydrogen from such a plant would be in the range of $1/kg H2 to $2/kg H2. By using raw biomass as a feedstock, the cost of producing hydrogen at large biomass consumption rates is more cost effective than steam reforming of hydrocarbons or biomass gasification and can achieve the overall cost goals of the DOE Fuel Cell Technologies Program. The complete conversion of wood to hydrogen, methane, and carbon dioxide was repeatedly demonstrated in batch reactors varying in size from 50 mL to 7.6 L. The different wood sources (e.g., swamp maple, poplar, and commercial wood flour) were converted in the presence of a heterogeneous catalyst and base at relatively low temperatures (e.g., 310°C) at sub-critical pressures sufficient to maintain the liquid phase. Both precious metal and base metal catalysts were found to be active for the liquid phase hydrolysis and reforming of wood. Pt-based catalysts, particularly Pt-Re, were shown to be more selective toward breaking C-C bonds, resulting in a higher selectivity to hydrogen versus methane. Ni-based catalysts were found to prefer breaking C-O bonds, favoring the production of methane. The project showed that increasing the concentration of base (base to wood ratio) in the presence of Raney Ni catalysts resulted in greater selectivity toward hydrogen but at the expense of increasing the production of undesirable organic acids from the wood, lowering the amount of wood converted to gas. It was shown that by modifying Ni-based catalysts with dopants, it was possible to reduce the base concentration while maintaining the selectivity toward hydrogen and increasing wood conversion to gas versus organic acids. The final stage of the project was the construction and testing of a demonstration unit for H2 production. This continuous flow demonstration unit consisted of wood slurry and potassium carbonate feed pump systems, two reactors for hydrolysis and reforming, and a gas-liquid separation system. The technical challenges associated with unreacted wood fines and Raney Ni catalyst retention limited the demonstration unit to using a fixed bed Raney Ni catalyst form. The lower activity of the larger particle Raney Ni in turn limited the residence time and thus the wood mass flow feed rate to 50 g min-1 for a 1 wt% wood slurry. The project demonstrated continuous H2 yields with unmodified, fixed bed Raney Ni, from 63% to 100% with corresponding H2 selectivities of 6% to 21%, for periods of several hours. The fixed bed form of the Raney Ni exhibited signs of deactivation which requires further study.

08 HYDROGEN↗

Ignition of turbulent swirling n-heptane spray flames using single and multiple sparks

This paper examines ignition processes of an n-heptane spray in a flow typical of a liquid-fuelled burner. The spray is created by a hollow-cone pressure atomiser placed in the centre of a bluff body, around which swirling air induces a strong recirculation zone. Ignition was achieved by single small sparks of short duration (2 mm; 0.5 ms), located at various places inside the flow so as to identify the most ignitable regions, or larger sparks of longer duration (5 mm; 8 ms) repeated at 100 Hz, located close to the combustion chamber enclosure so as to mimic the placement and characteristics of a gas turbine combustor surface igniter. The air and droplet velocities, the droplet diameter, and the total (i.e. liquid plus vapour) equivalence ratio were measured in inert flow by phase Doppler anemometry and sampling respectively. Fast camera imaging suggested that successful ignition events were associated with flamelets that propagated back towards the spray nozzle. Measurements of ignition probability with the single spark showed that localised ignition inside the spray is more likely to result in successful flame establishment when the spark is located in a region of negative velocity, relatively small droplet Sauter mean diameter, and mean equivalence ratio within the flammability limits. Ignition with the single spark was not possible at the location where the multiple spark experiments were performed. For those, the multiple spark sequence lasted approximately 1 to 5 s. It was found that a long spark sequence increases the ignition efficiency, which reached a maximum of 100% at the axial distance where the recirculation zone had maximum width. Ignition was not feasible with the spark downstream of about two burner diameters. Visualisation showed that small flame kernels emanate very often from the spark, which can be stretched as far as 20 mm from the electrodes by the turbulent velocity fluctuations. These kernels survive very little time. Successful overall ignition occurs at a random time from the spark initiation and, as in the case of the single spark, success is associated with kernels that move without getting extinguished towards the bluff body. The results demonstrate that the energy deposited by multiple sparks and spark stretching in a turbulent flow can have a spatially far-reaching effect to initiate combustion. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Autonomous plug and play electric vehicle charging scenarios including reactive power provision: a probabilistic load flow analysis

Electric vehicle (EV) charging can have various impacts on low‐voltage distribution systems, along with increasing the uncertainty of network load levels. One method for capturing the statistical uncertainty is probabilistic load flow (PLF). A primary concern of such an approach is determining the correlation between the input variables. Since data are limited, a 1 min resolution bottom‐up time‐variant load model, capturing the changing voltage dependencies of the load, is used for modelling household electrical demand to provide pseudo‐meter data for the three‐phase PLF analysis of a residential distribution network. The correlation between the household and EV charging loads are implicitly taken into account by modelling the EV plug‐in and departure times with the corresponding occupancy model. Two autonomous plug‐and‐play charging scenarios are compared with a standard charging arrangement at both unity and 0.95 capacitive power factors. Four different PLF input correlation scenarios, varying from fully correlated to fully independent, are considered. The proposed charging scenarios and reactive power provision reduce the likelihood of system voltage violations introduced by EVs. The PLF results are verified against those from the initial time‐series analysis providing valuable insight into the uncertainty introduced by EVs and the correlation between household and EV loads.

Melhorn, Alexander C.↗

Solar filament material oscillations and drainage before eruption

Both large-amplitude longitudinal (LAL) oscillations and material drainage in a solar filament are associated with the flow of material along the filament axis, often followed by an eruption. However, the relationship between these two motions and a subsequent eruption event is poorly understood. We analyze a filament eruption using EUV imaging data captured by the Atmospheric Imaging Array on board the Solar Dynamics Observatory and the Hα images from the Global Oscillation Network Group. Hours before the eruption, the filament was activated, with one of its legs undergoing a slow rising motion. The asymmetric activation inclined the filament relative to the solar surface. After the active phase, LAL oscillations were observed in the inclined filament. The oscillation period increased slightly over time, which may suggest that the magnetic fields supporting the filament evolve to be flatter during the slow rising phase. After the oscillations, a significant amount of filament material was drained toward one filament endpoint, followed immediately by the violent eruption of the filament. The material drainage may further support the change in magnetic topology prior to the eruption. Moreover, we suggest that the filament material drainage could play a role in the transition from a slow to a fast rise of the erupting filament.

79 ASTRONOMY AND ASTROPHYSICS↗

Role of Outer Membrane C-Type Cytochromes MtrC and OmcA in Shewanella Oneidensis MR-1 Cell Production, Accumulation, and Detachment During Respiration on Hematite

Solid phase iron oxides are considered to be important terminal electron acceptors for microbial respiration in many anoxic environments. Besides the knowledge that cells attach to and reduce these substrates, other aspects of surface-associated cell behavior and the related cell surface components that influence cell-mineral interactions are not well understood. In the present study, wild-type cells of the dissimilatory iron-reducing bacterium Shewanella oneidensis MR-1 formed thin biofilms one-to-two cell layers in thickness when respiring on natural specular hematite under flow conditions similar to those which exist in aquatic sediments and subsurface environments. The distribution of cells within the biofilm indicated that direct contact was not required for electron transfer from cells to the mineral surface. Detached biomass in the form of single cells represented >99% of the surface-associated wild-type cell production from respiration on hematite over the biofilm life cycle. A mutant deficient in the outer membrane c35 type cytochrome OmcA, while still able to respire and replicate on hematite, established a lower steady-state cell density on the mineral surface than that of the wild-type strain. A mutant deficient in MtrC, another outer membrane c-type cytochrome, and a mutant deficient in both cytochromes were unable to reduce sufficient amounts of hematite to support detectable growth on the mineral surface. When considered in the context of previous work, the results support a growing body of evidence that the relative importance of OmcA and MtrC to cell respiration and replication depends on the form of iron oxide available as terminal electron acceptor.

Mitchell, Andrew C↗

Comparison of Equivalence Ratio Transients on Combustion Instability in Single-Nozzle and Multi-Nozzle Combustors

Low-emissions gas turbine combustion, achieved through the use of lean, premixed fueling strategies, is susceptible to combustion instability. The driving mechanism for this instability arises from fluctuations of pressure, fuel/air flow rate, and heat release rate. If these fluctuations are relatively in-phase, the combustion system will evolve to a self-excited state. The self-excited instability frequency and amplitude depend mainly on the operating condition and the geometry of the combustor. In this study, we consider the onset and decay of self-excited instabilities, resulting from transients in fuel/air ratio, in both single-nozzle and multi-nozzle combustors. In particular, we examine the differences in the instability onset and decay processes between these two flame configurations, as most gas turbine combustors have multiple nozzles, but most gas turbine combustor experiments utilize a single-nozzle. A nonlinear logistic regression analysis is applied to study the timescales of the decay and onset transients. Variations in the equivalence ratio change the heat release rate distribution inside the combustor, which is captured using chemiluminescence imaging. The normalized Rayleigh index, which shows the spatial distribution of the instability driving, is calculated to analyze the driving strength in different regions of the flame. Comparisons between the single- and multi-nozzle flame transients, including both center and outer flames for the multi-nozzle combustor, suggest that both confinement from the wall and flame-flame interaction are crucial to determining flame dynamics as the equivalence ratio transient changes the heat release rate distribution near corner recirculation zone and flame shear layers.

Chen, Xiaoling↗

Comparison of equivalence ratio transients on combustion instability in single-nozzle and multi-nozzle combustors

Low-emissions gas turbine combustion, achieved through the use of lean, premixed fueling strategies, is susceptible to combustion instability. The driving mechanism for this instability arises from fluctuations of pressure, fuel/air flow rate, and heat release rate. If these fluctuations are relatively in-phase, the combustion system will evolve to a self-excited state. The self-excited instability frequency and amplitude depend mainly on the operating condition and the geometry of the combustor. In this study, we consider the onset and decay of self-excited instabilities, resulting from transients in fuel/air ratio, in both single-nozzle and multi-nozzle combustors. In particular, we examine the differences in the instability onset and decay processes between these two flame configurations, as most gas turbine combustors have multiple nozzles, but most gas turbine combustor experiments utilize a single-nozzle. A nonlinear logistic regression analysis is applied to study the timescales of the decay and onset transients. Variations in the equivalence ratio change the heat release rate distribution inside the combustor, which is captured using chemiluminescence imaging. The normalized Rayleigh index, which shows the spatial distribution of the instability driving, is calculated to analyze the driving strength in different regions of the flame. Comparisons between the single- and multi-nozzle flame transients, including both center and outer flames for the multi-nozzle combustor, suggest that both confinements from the wall and flame-flame interaction are crucial to determining flame dynamics as the equivalence ratio transient changes the heat release rate distribution near corner recirculation zone and flame shear layers.

20 FOSSIL-FUELED POWER PLANTS↗

Numerical simulations of liquid jetting with solid inclusions

The dynamics of finite-sized particles in fluids, and their influence on the overall flow, are of great interest across several industrial, environmental, and medical fields. In the context of inkjet printing, the presence of solid inclusions can be either intentional, as in additive manufacturing, or unintentional, as in standard printing processes. These inclusions can strongly impact the jetting process, causing effects such as jet asymmetry, bubble entrapment, and the formation of satellite droplets. Understanding and controlling particle behavior is therefore essential, particularly to predict how and when particles are ejected over multiple jetting cycles. It is therefore critical to develop reliable models that allow for a deeper understanding of the complex interplay between particle and fluid during the whole printing process. To address this, we present a tailored implementation of the Color-Gradient multicomponent Lattice Boltzmann Method for fully resolved three-dimensional (3D) simulations of multicycle liquid jetting with particles. Our method supports realistic parameter settings aligned with industrial inkjet systems, and we provide both qualitative and quantitative validation against experimental data. Additionally, we introduce a simplified model based on the Stokes drag law, in which solid particles are represented as point particles and do not influence the fluid flow. Despite this limitation, the model offers a computationally efficient means to explore the vast parameter space typically encountered in industrial applications, allowing, e.g., identifying critical ejection regions and estimating the number of cycles required for particle release. These qualitative insights are valuable for guiding and complement fully two-way coupled simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of electrode spacing on the density distributions of electrons, ions, and metastable and radical molecules in SiH{sub 4}/NH{sub 3}/N{sub 2}/He capacitively coupled plasmas

Semiconductor fabrication often requires the deposition of hydrogenated silicon nitride (SiN{sub x}H{sub y}) film using SiH{sub 4}/NH{sub 3}/N{sub 2}/He capacitively coupled plasma (CCP) discharge. As analysis of the discharge geometry is essential to understanding CCP deposition, the effect of electrode spacing on the two-dimensional distributions of electrons, ions, and metastable and radical molecules was analyzed numerically using a fluid model. The simulation shows that the spatial variations in the ionization rates near the sheath become more obvious as the electrode spacing increases. In addition, as molecule-molecule gas-phase reactions are significantly affected by the local residence time, large electrode spacings are associated with significant volumetric losses for positive ions. Consequently, an increase of the electrode spacing leads axial density profiles of ions to change from bell shaped to double humped. However, NH{sub 4}{sup +} persistently maintains a bell-shaped axial density profile regardless of the degree of electrode spacing. We set the mole fraction of NH{sub 3} to only 1% of the total flow at the inlet, but NH{sub 4}{sup +} is the most abundant positive ion at the large electrode spacings. As the gas flow can transport the radicals around the space between the electrodes, we found that radical density distribution shifts toward the grounded electrode. The shift becomes pronounced as the electrode spacing increases. Finally, to validate our model, we compared the calculated deposition rate profile with the experimental data obtained along the wafer radius. According to our numerical results, the SiN{sub x}H{sub y} deposition rate decreases by approximately 16% when the electrode spacing increases from 9 to 20 mm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High‐resolution experiments on chemical oxidation of DNAPL in variable‐aperture fractures

Abstract Chemical oxidation of dense nonaqueous‐phase liquids (DNAPLs) by permanganate has emerged as an effective remediation strategy in fractured rock. We present high‐resolution experimental investigations in transparent analog variable‐aperture fractures to improve understanding of chemical oxidation of residual entrapped trichloroethylene (TCE) in fractures. Four experiments were performed with different permanganate concentrations, flow rates, and initial TCE phase geometry. The initial aperture field and evolving entrapped‐phase geometry were quantified for each experiment. The integrated mass transfer rate from the TCE phase for all experiments exhibited three time regimes: an early‐time regime with slower mass transfer rates limited by low specific interfacial area; an intermediate‐time regime with higher mass transfer rates resulting from breakup of large TCE blobs, which greatly increases specific interfacial area; and a late‐time regime with low mass transfer rates due to the deposition of MnO 2 precipitates. In two experiments, mass balance analyses suggested that TCE mass removal rates exceeded the maximum upper bound mass removal rates derived by assuming that oxidation and dissolution are the only mechanisms for TCE mass removal. We propose incomplete oxidation by permanganate and TCE solubility enhancement by intermediate reaction products as potential mechanisms to explain this behavior. We also speculate that some intermediate reaction products with surfactant‐like properties may play a role in lowering the TCE‐water interfacial tension, thus causing breakup of large TCE blobs. Our quantitative experimental measurements will be useful in the context of developing accurate computational models for chemical oxidation of TCE in fractures.

Arshadi, Masoud↗

Two types of superconducting pairs in stripe-ordered La 2 - x Ba x CuO 4 ( x = 1 / 8 ) : Evidence from resistivity measurements

Recent angle-resolved c-axis resistivity measurements of the stripe-ordered La 2-x Ba x CuO 4 (LBCO) with x = 1/8 revealed an unexpected dependence on the direction of the in-plane magnetic field. We argue that these and other available data for the c-axis transport point to the existence of superconducting pairs of two different types in the x = 1/8 LBCO below the stripe ordering temperature. The pairs of one type carry finite momentum and are confined to the Cu-O planes; the pairs of other type (probably the conventional d wave with zero momentum) propagate along narrow conducting channels traversing the sample in the c-axis direction. The evidence for this comes from the observed exponential temperature dependence of the c-axis resistivity ρ c (T ) which we attribute to the thermally excited slips of the superconducting phase and flux flows. We present a simple theory to fit the observed π/2-periodic dependence of ρ c on the direction of the in-plane magnetic field and the other data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Convective Heat Transfer Potential of Particles/Airflow Through Single Cell Thick Additively Manufactured Octet-Shaped Lattice Frame Material

Abstract Particle-to-Supercritical Carbon Dioxide (sCO2) heat exchangers are one of the most critical components of the next-generation Concentrating Solar Power (CSP) plants. There have been several efforts to enhance the overall heat exchanger performance which essentially comprises of thermal resistances offered by sCO2 channel, wall (separating sCO2 with particles) thickness, particle-wall contact resistance and particle-side effective heat transfer coefficient. This study is focused towards reducing the particle side thermal resistance by incorporating single unit cell thick reticulated Octet lattice frame structures on the falling particle side to enhance the effective thermal conductivity of the particle channel and to enhance convective heat transfer between the falling particles and the solid phase of the falling particle channel (endwalls and fibers). Steady-state experiments were conducted to measure the effective thermal conductivity of lattice frame material for two cases: a) when void space was occupied by air, b) when void space was occupied with particles. Further, convective heat transfer experiments have been conducted with both air (steady-state) and particles (quasi steady-state) as “working fluid” for panels sandwiching the Octet array. Three different lattice porosities ranging from 0.75 to 0.9 have been tested for a wide range of air flow rates and a fixed particle flow rate (highest potential).

Aider, Youssef↗

Flow Measurements of Methane-Fueled Rotating Detonation Combustion

Time-resolved particle image velocimetry (PIV) is applied to the flow field at the immediate exit of a rotating detonation combustor (RDC) operating on methane fuel and oxygen-enriched air. The detailed experimental results, which allow for the quantification of the periodic flow field, are believed to be the first such measurements acquired for a RDC. A thorough understanding of the velocity flow field exiting the combustor is important to develop future rotating detonation engine (RDE) design, as well as to successfully implement the flow conditioning devices to power generating turbine hardware located downstream. In this study, multiple PIV tests were conducted and a test case with over 16,000 consecutive image pairs acquired at a PIV framing rate of 30 kHz is analyzed in detail, and is supplemented with another test case to verify the repeatability of the measurements. Results are discretized into a two-dimensional flow field to reveal the significant insights to characterize the cyclical velocity fluctuations. While the flow field is primarily axial, a significant circumferential velocity component is also present. Key attributes of the velocity flow field are observed to be repeated from cycle-to-cycle. The codependency of the fluctuations in axial and circumferential velocity components are investigated, as is the relationship between velocity magnitude and flow orientation. At discrete measurement locations, the Fourier analysis of PIV data is used to reconstruct the cyclical variation of velocity components with respect to the phase angle.

03 NATURAL GAS↗

Tracking interface and common curve dynamics for two-fluid flow in porous media

Pore-scale studies of multiphase flow in porous medium systems can be used to understand transport mechanisms and quantitatively determine closure relations that better incorporate microscale physics into macroscale models. Multiphase flow simulators constructed using the lattice Boltzmann method provide a means to conduct such studies, including both the equilibrium and dynamic aspects. Moving, storing, and analyzing the large state space presents a computational challenge when highly-resolved models are applied. We present an approach to simulate multiphase flow processes in which in-situ analysis is applied to track multiphase flow dynamics at high temporal resolution. We compute a comprehensive set of measures of the phase distributions and the system dynamics, which can be used to aid fundamental understanding and inform closure relations for macroscale models. The measures computed include microscale point representations and macroscale averages of fluid saturations, the pressure and velocity of the fluid phases, interfacial areas, interfacial curvatures, interface and common curve velocities, interfacial orientation tensors, phase velocities and the contact angle between the fluid-fluid interface and the solid surface. Test cases are studied to validate the approach and illustrate how measures of system state can be obtained and used to inform macroscopic theory.

97 MATHEMATICS AND COMPUTING↗

Celecoxib induced apoptosis against different breast cancer cell lines by down-regulated NF-κB pathway

Inducible cyclooxgenase-2 (COX-2) is commonly overexpressed in breast tumors and is a target for cancer therapy. Here, we studied the effect of Celecoxib, a COX-2 inhibitor on two molecular breast cancer subtypes—MDA-MB-231 and SK-BR-3. Firstly, MDA-MB-231 and SK-BR-3 cells were treated with various concentration of Celecoxib for 24 and 48 h. Celecoxib-inhibition of NF-κB (p52 and p65) transcriptional activity and effect of Caspase 3 pathway were examined by western blotting. COX-2 mRNA was assessed by RT-PCR. Cell viability was evaluated by the 3-(4,5-dimethylthiazol-2-yl)-2,5- diphenyltetrazoliumbromide (MTT) assay. Both cell cycle profiles and apoptosis were analyzed using flow cytometry. We found that Celecoxib inhibited the proliferation of the MDA-MB-231 cell line in a dose-time dependent manner versus SK-BR-3 in a dose dependent manner only (p < 0.05). Celecoxib induced apoptosis of the MDA-MB-231 and SK-BR-3 cell lines in a dose-time dependent manner (p < 0.05) with more mean apoptotic cells in MDA-MB-231 than SK-BR-3. Significant cell-cycle arrest at the G1 phase in the MDA-MB-231 versus G2 phase in SK-BR-3 cell lines. NF-κB (p52 and p65) and COX-2 expressions were downregulated in a dose dependent manner, while Caspase 3 expression was upregulated in both cell lines. In this present study, our data indicated Celecoxib might affect each breast cancer subtype independently. Therefore, when using Celecoxib in treatment of breast cancer, it is imperative to consider the subtype of breast cancer on a molecular level. - Highlights: • We assumed and proved the correlation of levels of caspase-3, NF-κB (p52, p65) expression in the two types of breast cancer cells (i.e. MDA-MB-231 and SKBR3), and to determine whether exposure to different concentrations of Celecoxib has an impact in expression of these apoptotic and anti-apoptotic pathways respectively. • The difference in effect of Celecoxib was investigated in the two molecular subtypes of breast cancer cells i.e. MDA-MB-231 (ER–, PR–, HER2–) and SKBR3 (ER–, PR–, HER2+ Ki67 high) with regard to proliferation and cell cycle analysis. • In our study, we demonstrated that when using Celecoxib in treatment of breast cancer, it is imperative to consider the subtype of breast cancer on a molecular level.

60 APPLIED LIFE SCIENCES↗

Plexciton Dirac points and topological modes

Plexcitons are polaritonic modes that result from the strong coupling between excitons and plasmons. Here, we consider plexcitons emerging from the interaction of excitons in an organic molecular layer with surface plasmons in a metallic film. We predict the emergence of Dirac cones in the two-dimensional band-structure of plexcitons due to the inherent alignment of the excitonic transitions in the organic layer. An external magnetic field opens a gap between the Dirac cones if the plexciton system is interfaced with a magneto-optical layer. The resulting energy gap becomes populated with topologically protected one-way modes, which travel at the interface of this plexcitonic system. Furthermore, our theoretical proposal suggests that plexcitons are a convenient and simple platform for the exploration of exotic phases of matter and for the control of energy flow at the nanoscale.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Variability of the Black Hole Image in M87 at the Dynamical Timescale

The black hole images obtained with the Event Horizon Telescope (EHT) are expected to be variable at the dynamical timescale near their horizons. For the black hole at the center of the M87 galaxy, this timescale (5–61 days) is comparable to the 6 day extent of the 2017 EHT observations. Closure phases along baseline triangles are robust interferometric observables that are sensitive to the expected structural changes of the images but are free of station-based atmospheric and instrumental errors. We explored the day-to-day variability in closure-phase measurements on all six linearly independent nontrivial baseline triangles that can be formed from the 2017 observations. We showed that three triangles exhibit very low day-to-day variability, with a dispersion of ∼3°–5°. The only triangles that exhibit substantially higher variability (∼90°–180°) are the ones with baselines that cross the visibility amplitude minima on the u–v plane, as expected from theoretical modeling. We used two sets of general relativistic magnetohydrodynamic simulations to explore the dependence of the predicted variability on various black hole and accretion-flow parameters. We found that changing the magnetic field configuration, electron temperature model, or black hole spin has a marginal effect on the model consistency with the observed level of variability. On the other hand, the most discriminating image characteristic of models is the fractional width of the bright ring of emission. Models that best reproduce the observed small level of variability are characterized by thin ring-like images with structures dominated by gravitational lensing effects and thus least affected by turbulence in the accreting plasmas.

79 ASTRONOMY AND ASTROPHYSICS↗