Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomic patterning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Coupling of emergent octahedral rotations to polarization in (K,Na)NbO 3 ferroelectrics

Perovskite potassium sodium niobates, K 1-x Na x NbO 3 , are promising lead-free piezoelectrics. Their dielectric and piezoelectric characteristics peak near x = 0.5, but the reasons for such property enhancement remain unclear. We addressed this uncertainty by analyzing changes in the local and average structures across the x = 0.5 composition, which have been determined using simultaneous Reverse Monte Carlo fitting of neutron and X-ray total-scattering data, potassium EXAFS, and diffuse-scattering patterns in electron diffraction. Within the A-sites, Na cations are found to be strongly off-centered along the polar axis as a result of oversized cube-octahedral cages determined by the larger K ions. These Na displacements promote off-centering of the neighboring Nb ions, so that the Curie temperature and spontaneous polarization remain largely unchanged with increasing x, despite the shrinking octahedral volumes. The enhancement of the properties near x = 0.5 is attributed to an abrupt increase in the magnitude and probability of the short-range ordered octahedral rotations, which resembles the pre-transition behavior. Lastly, these rotations reduce the bond tension around Na and effectively soften the short Na-O bond along the polar axis - an effect that is proposed to facilitate reorientation of the polarization as external electric field is applied.

74 ATOMIC AND MOLECULAR PHYSICS↗

Metastable anions of dinitrobenzene: Resonances for electron attachment and kinetic energy release

Attachment of free, low-energy electrons to dinitrobenzene (DNB) in the gas phase leads to DNB{sup -} as well as several fragment anions. DNB{sup -}, (DNB-H){sup -}, (DNB-NO){sup -}, (DNB-2NO){sup -}, and (DNB-NO{sub 2}){sup -} are found to undergo metastable (unimolecular) dissociation. A rich pattern of resonances in the yield of these metastable reactions versus electron energy is observed; some resonances are highly isomer-specific. Most metastable reactions are accompanied by large average kinetic energy releases (KER) that range from 0.5 to 1.32 eV, typical of complex rearrangement reactions, but (1,3-DNB-H){sup -} features a resonance with a KER of only 0.06 eV for loss of NO. (1,3-DNB-NO){sup -} offers a rare example of a sequential metastable reaction, namely, loss of NO followed by loss of CO to yield C{sub 5}H{sub 4}O{sup -} with a large KER of 1.32 eV. The G4(MP2) method is applied to compute adiabatic electron affinities and reaction energies for several of the observed metastable channels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomically precise lateral modulation of a two-dimensional electron liquid in anatase TiO 2 thin films

Engineering the electronic band structure of two-dimensional electron liquids (2DELs) confined at the surface or interface of transition metal oxides is key to unlocking their full potential. Here we describe a new approach to tailoring the electronic structure of an oxide surface 2DEL demonstrating the lateral modulation of electronic states with atomic scale precision on an unprecedented length scale comparable to the Fermi wavelength. To this end, we use pulsed laser deposition to grow anatase TiO 2 films terminated by a (1 x 4) in-plane surface reconstruction. Employing photo-stimulated chemical surface doping we induce 2DELs with tunable carrier densities that are confined within a few TiO 2 layers below the surface. Subsequent in situ angle resolved photoemission experiments demonstrate that the (1 x 4) surface reconstruction provides a periodic lateral perturbation of the electron liquid. Furthermore, this causes strong backfolding of the electronic bands, opening of unidirectional gaps and a saddle point singularity in the density of states near the chemical potential.

36 MATERIALS SCIENCE↗

Determination of Gas-Phase Ion Structures of Locally Polar Homopolymers Through High-Resolution Ion Mobility Spectrometry–Mass Spectrometry

The strong synergy arising from coupling two orthogonal analytical techniques such as ion mobility and mass spectrometry can be used to separate complex mixtures and determine structural information of analytes in the gas phase. A tandem study is performed using two systems with different gases and pressures to ascertain gas-phase conformations of homopolymer ions. Aside from spherical and stretched configurations, intermediate configurations formed by a multiply charged globule and a “bead-on-a-string” appendix are confirmed for polyethylene-glycol (PEG), polycaprolactone (PCL), and polydimethylsiloxane (PDMS). These intermediate configurations are shown to be ubiquitous for all charge states and masses present. For each charge state, configurations evolve in two distinctive patterns: an inverse evolution which occurs as an elementary charge attached to the polymer leaves the larger globule and incorporates itself into the appendage, and a forward evolution which reduces the globule without relinquishing a charge while leaving the appendix relatively constant. Forward evolutions are confirmed to form self-similar family shapes that transcend charge states for all polymers. Identical structural changes occur at the same mass over charge regardless of the system, gas or pressure strongly suggesting that conformations are only contingent on number of charges and chain length, and start arranging once the ion is at least partially ejected from the droplet, supporting a charge extrusion mechanism. Configurational changes are smoother for PDMS which is attributed to the larger steric hindrance caused by protruding pendant groups. This study has implications in the study of the configurational space of more complex homopolymers and heteropolymers. .

74 ATOMIC AND MOLECULAR PHYSICS↗

Review Article: Progress in fabrication of transition metal dichalcogenides heterostructure systems

Transition metal dichalcogenide (TMDC) semiconductors have attracted significant attention because of their rich electronic/photonic properties and importance for fundamental research and novel device applications. These materials provide a unique opportunity to build up high quality and atomically sharp heterostructures because of the nature of weak van der Waals interlayer interactions. The variable electronic properties of TMDCs (e.g., band gap and their alignment) provide a platform for the design of novel electronic and optoelectronic devices. The integration of TMDC heterostructures into the semiconductor industry is presently hindered by limited options in reliable production methods. Many exciting properties and device architectures which have been studied to date are, in large, based on the exfoliation methods of bulk TMDC crystals. These methods are generally more difficult to consider for large scale integration processes, and hence, continued developments of different fabrication strategies are essential for further advancements in this area. In this review, the authors highlight the recent progress in the fabrication of TMDC heterostructures. The authors will review several methods most commonly used to date for controllable heterostructure formation. One of the focuses will be on TMDC heterostructures fabricated by thermal chemical vapor deposition methods which allow for the control over the resulting materials, individual layers and heterostructures. Another focus would be on the techniques for selective growth of TMDCs. The authors will discuss conventional and unconventional fabrication methods and their advantages and drawbacks and will provide some guidance for future improvements. Mask-assisted and mask-free methods will be presented, which include traditional lithographic techniques (photo- or e-beam lithography) and some unconventional methods such as the focus ion beam and the recently developed direct-write patterning approach, which are shown to be promising for the fabrication of quality TMDC heterostructures.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

PRODUCTION OF ALL THE r-PROCESS NUCLIDES IN THE DYNAMICAL EJECTA OF NEUTRON STAR MERGERS

Recent studies suggest that binary neutron star (NS-NS) mergers robustly produce heavy r-process nuclei above the atomic mass number A ∼ 130 because their ejecta consist of almost pure neutrons (electron fraction of Y {sub e} < 0.1). However, the production of a small amount of the lighter r-process nuclei (A ≈ 90-120) conflicts with the spectroscopic results of r-process-enhanced Galactic halo stars. We present, for the first time, the result of nucleosynthesis calculations based on the fully general relativistic simulation of a NS-NS merger with approximate neutrino transport. It is found that the bulk of the dynamical ejecta are appreciably shock-heated and neutrino processed, resulting in a wide range of Y {sub e} (≈0.09-0.45). The mass-averaged abundance distribution of calculated nucleosynthesis yields is in reasonable agreement with the full-mass range (A ≈ 90-240) of the solar r-process curve. This implies, if our model is representative of such events, that the dynamical ejecta of NS-NS mergers could be the origin of the Galactic r-process nuclei. Our result also shows that radioactive heating after ∼1 day from the merging, which gives rise to r-process-powered transient emission, is dominated by the β-decays of several species close to stability with precisely measured half-lives. This implies that the total radioactive heating rate for such an event can be well constrained within about a factor of two if the ejected material has a solar-like r-process pattern.

79 ASTRONOMY AND ASTROPHYSICS↗

Formation of Carbon Dioxide Attached Fragment Ions in the Fragmentation of Deprotonated Tolfenpyrad and Tebufenpyrad

The in-source collision-induced dissociation (CID) and MS/MS mass spectra of deprotonated tolfenpyrad and tebufenpyrad both showed an unusual fragment ion at m/z 187, but its fragmentation pattern and structure could not be explained by logical neutral losses. Accurate mass measurement indicated that the mass difference between this fragment ion and the dominant fragment ion at m/z 143 equaled to a carbon dioxide (CO{sub 2}) molecule. The isolation of the fragment ion m/z 143 in the mass analyzer could spontaneously give rise to the ion m/z 187. The Gibbs free energy of carbon dioxide addition to deprotonated pyrazole ion was significantly negative from the computational results. According to these results, we derived a proposal for the formation and structure of the ion m/z 187, which was an attachment of molecular carbon dioxide to the fragment ion m/z 143 to produce a carboxylate anion. The trace carbon dioxide was speculated to be derived from the residual atmosphere or collision gas in the instrument. This study is valuable for the qualitative and quantitative mass spectrometry analysis of pesticides containing the pyrazole functional group. .

74 ATOMIC AND MOLECULAR PHYSICS↗

Structure-substitution limit correlation study on Cr{sup 3+} substituted polycrystalline yttrium iron garnet

Polycrystalline samples of Cr{sup 3+} - substituted yttrium iron garnet (Y{sub 3}Fe{sub 5}O{sub 12}) system with general chemical formula, Y{sub 3}Fe{sub 5-x}Cr{sub x}O{sub 12}, x = 0.0, 0.2, 0.4 and 0.6 were synthesized by double sintering ceramic technique and characterized by X-ray powder diffractometry. The Rietveld fitted X-ray diffraction patterns analysis revealed mono phase formation for x = 0.0 - 0.4 compositions while x = 0.6 composition possesses mixed phase character. The observed substitution limit has been discussed in the light of ionic size of substituent, electrostatic energy, electronic configuration and synthesis parameters. These observations strongly suggest that the electronic configuration of Cr{sup 3+}, which is favorable to the formation of d2sp3 (octahedral) type bonds, must be important. In the case of Cr{sup 3+}, the substitution does not appear to proceed well for x much greater than 0.5, this limitation probably is a consequence of the strong preference of a smaller ion Cr{sup 3+}, for a larger octahedral site which quickly leads to a condition not comparable with the requirement of the structure. The distribution of cations, mean ionic radii and theoretical lattice constant values have been determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CO{sub 2} reduction by group 6 transition metal suboxide cluster anions

Reactions between small group 6 transition metal suboxide clusters, M{sub x}O{sub y}{sup -} (M={sup 98}Mo or {sup 186}W; x=1-4; y{<=}3x) and both CO{sub 2} and CO were studied in gas phase using mass spectrometric analysis of high-pressure, fast flow reaction products. Both Mo{sub 2}O{sub y}{sup -} and W{sub 2}O{sub y}{sup -} show evidence of sequential oxidation by CO{sub 2} of the form, M{sub 2}O{sub y}{sup -}+CO{sub 2}{yields}M{sub 2}O{sub y+1}{sup -}+CO for the more reduced species. Similar evidence is observed for the trimetallic clusters, although Mo{sub 3}O{sub 6}{sup -} appears uniquely unreactive. Lower mass resolution in the M{sub 4}O{sub y}{sup -} range precludes definitive product mass assignments, but intensity patterns suggest the continued trend of sequential oxidation of the more reduced end of the M{sub 4}O{sub y}{sup -} oxide series. Based on thermodynamic arguments, cluster oxidation by CO{sub 2} is possible if D{sub 0}(O-Mo{sub x}O{sub y}{sup -})>5.45 eV. Although simple bond energy analysis suggests that tungsten oxides may be more reactive toward CO{sub 2} compared to molybdenum oxides, this is not born out experimentally, suggesting that the activation barrier for the reduction of CO{sub 2} by tungsten suboxide clusters is very high compared to analogous molybdenum suboxide clusters. In reactions with CO, suboxides of both metal-based oxides show CO addition, with the product distribution being more diverse for Mo{sub x}O{sub y}{sup -} than for W{sub x}O{sub y}{sup -}. No evidence of cluster reduction by CO is observed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulations for x-ray imaging of wave-packet dynamics

Previous work on imaging wave-packet dynamics with x-ray scattering revealed that the scattering patterns deviate substantially from the notion of instantaneous momentum density of the wave packet. Here we show that scattering patterns can provide clear insights into the electron wave-packet dynamics if the final state of the scattered electron and the scattered photon momentum are determined simultaneously. The scattering probability is shown to be proportional to the modulus square of the Fourier transform of the instantaneous electronic spatial wave function weighted by the final state of the electron. Several cases for the choice of final state of the electron are explored. First, the case where the final state can be measured up to a given principal quantum number n and orbital angular momentum l are presented. Next, the case where the final states can only be determined up to a given energy is discussed. Lastly, the case of an initial wave packet consisting of a large amount of a known stationary state and a small amount of an unknown stationary state is examined. The scattering profile is used to determine the properties of the unknown state in the wave packet.

74 ATOMIC AND MOLECULAR PHYSICS↗

Influence of magnetostatic interactions on the magnetization reversal of patterned magnetic elements

The magnetization reversal in patterned thin-film arrays of elliptical submicron permalloy elements has been investigated by magnetic-force microscopy and micro-magneto-optic Kerr effect. Three different spatial arrangements of chains are considered, namely chains aligned parallel to the long axis of the ellipse, chains aligned parallel to the short axis of the ellipse, and arrays with roughly equal element-to-element spacings in both directions. Comparison of the hysteresis loops in an in-plane field perpendicular to the ellipses' long axes shows that the magnetization reversibility is highest for chains along the long axis. This is due to the nearly coherent magnetization rotation in the applied magnetic field and to the formation of a head-to-tail domain arrangement. Other arrangements, such as chains of ellipses aligned parallel to short axis, yield flux-closure domains as the applied magnetic field is changed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The 1.66 μm spectrum of the ethynyl radical, CCH

Frequency-modulated diode laser transient absorption spectra of the ethynyl radical have been recorded at wavelengths close to 1.66 μm. The observed spectrum includes strong, regular, line patterns. The two main bands observed originate in the ground $\tilde{χ}$ 2 Σ + state and its first excited bending vibrational level of 2 $Π$ symmetry. The upper states, of 2 Σ + symmetry at 6055.6 cm -1 and 2 $Π$ symmetry at 6413.5 cm -1 , respectively, had not previously been observed and the data were analyzed in terms of an effective Hamiltonian representing their rotational and fine structure levels to derive parameters which can be used to calculate rotational levels up to J = 37/2 for the 2 $Π$ level and J = 29/2 for the 2 Σ one. Additionally, a weaker series of lines have been assigned to absorption from the second excited bending, (0 2 0), level of 2 Σ symmetry, to a previously observed state of 2 $Π$ symmetry near 6819 cm -1 . These strong absorption bands at convenient near-IR laser wavelengths will be useful for monitoring CCH radicals in chemical systems.

74 ATOMIC AND MOLECULAR PHYSICS↗

Studies of the structure and function of Mms6, a bacterial protein that promotes the formation of magnetic nanoparticles

Here we report structural and functional studies of Mms6, a biomineralization protein that can promote the formation in vitro of magnetic nanoparticles with sizes and morphologies similar to the magnetites synthesized by magnetotactic bacteria. We found the binding pattern of Mms6 to ferric ion to be two-phase and multivalent. We quantatively determined that Mms6 binds one Fe 3+ with a very high affinity (K d = 10 16 M). The second phase of iron binding is multivalent and cooperative with respect to iron with a K d in the μM range and a stoichiometry of about 20 ferric ion per protein molecule. We found that Mms6 exists in large particles of two sizes, one consisting of 20-40 monomeric units and the other of 200 units. From proteolytic digestion, ultracentrifugation and liposome fusion studies, we found that Mms6 forms a large micellar quaternary structure with the N-terminal domain self-assembling into a uniformly sized micelle and the C-terminal domain on the surface. The two-phase iron-binding pattern may be relevant to iron crystal formation. We propose that the first high affinity phase may stabilize a new conformation of the C-terminal domain that allows interaction with other C-terminal domains leading to a structural change in the multimeric protein complex that enables the second low affinity iron binding phase to organize iron and initiate crystal formation. We also observed a dimeric apparent molecular mass of the Mms6 C-terminal peptide (C21Mms6). We speculate that the C-terminal domain may form higher order quaternary arrangements on the surface of the micelle or when anchored to a membrane by the N-terminal domain. The change in fluorescence quenching in the N-terminal domain with iron binding suggests a structural integrity between the C- and N-terminal domains. The slow change in trp fluorescence as a function of time after adding iron suggests a very slow conformational change in the protein that involves both N- and C-terminal domains. We interpret these results to mean that there is a coordinated global change in Mms6 structure that involves multiple Mms6 monomers. Based on our observations, we propose a mechanism by which Mms6 can promote the formation of crystalline nanoparticles. Upon binding ferric iron at very high affinity with a molar ratio of 1, the C-terminal domains undergo a conformational change, coordinated with the N-terminal domain that initiates a slow rearrangement of the multiprotein complex to create a surface on which many iron atoms can organize. This slow rearrangement allows the initiation of a crystal that is propagated on the protein surface to form a crystal seed. We also observed that Mms6 undergoes a periodical structural change with increasing molar ratios of iron to protein. The observed structural change occurs in the N-terminal domain, but reflects iron binding by the C-terminal domain. A mutant Mms6 that does not promote the formation of superparamagnetic magnetite also does not undergo the periodic structural change. The correlation between the ability to form magnetic nanoparticles and the ability to undergo the periodic structural change suggests that this structural change might participate in the mechanism of magnetite formation. Analysis of the quaternary structure of Mms6 protein and its C-terminal domain reveals that the C-terminal domain contributes to the overall stability of the quaternary structure of Mms6. The C-terminal domain of Mms6 displays ferric reductase activity that is diminished in the mutant C-terminus. Although it does not play a role in the in vitro formation of magnetite during which both ferrous and ferric forms of iron are provided, this reductase activity may participate in magnetite formation in vivo. Our results suggest that the iron binding properties and quaternary structure of Mms6 is responsible for formation of magnetic nanoparticles. The ability for Mms6 protein to form a quaternary structure and the ability of that structure to change as iron is incorporated into a crystal may be fundamental aspects of the mechanism by which a small protein such as Mms6 can promote the formation of magnetite crystals.

36 MATERIALS SCIENCE↗

A DNA molecular printer capable of programmable positioning and patterning in two dimensions

Nanoscale manipulation and patterning usually require costly and sensitive top-down techniques such as those used in scanning probe microscopies or in semiconductor lithography. DNA nanotechnology enables exploration of bottom-up fabrication and has previously been used to design self-assembling components capable of linear and rotary motion. In this work, we combine three independently controllable DNA origami linear actuators to create a nanoscale robotic printer. The two-axis positioning mechanism comprises a moveable gantry, running on parallel rails, threading a mobile sleeve. We show that the device is capable of reversibly positioning a write head over a canvas through the addition of signaling oligonucleotides. We demonstrate “write” functionality by using the head to catalyze a local DNA strand–exchange reaction, selectively modifying pixels on a canvas. Furthermore, this work demonstrates the power of DNA nanotechnology for creating nanoscale robotic components and could find application in surface manufacturing, biophysical studies, and templated chemistry.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Classify QCD phase transition with deep learning

The state-of-the-art pattern recognition method in machine learning (deep convolution neural network) is used to identify the equation of state (EoS) employed in the relativistic hydrodynamic simulations of heavy ion collisions. High-level correlations of particle spectra in transverse momentum and azimuthal angle learned by the network act as an effective EoS-meter in deciphering the nature of the phase transition in QCD. The EoS-meter is model independent and insensitive to other simulation inputs including the initial conditions and shear viscosity for hydrodynamic simulations. Through this study we demonstrate that there is a traceable encoder of the dynamical information from the phase structure that survives the evolution and exists in the final snapshot of heavy ion collisions and one can exclusively and effectively decode these information from the highly complex final output with machine learning when traditional methods fail. Besides the deep neural network, the performance of traditional machine learning classifiers are also provided.

74 ATOMIC AND MOLECULAR PHYSICS↗

From a discrete to a continuous model for interpulse interference with a frequency-comb laser

We have investigated correlation patterns generated by a frequency-comb laser in a dispersive unbalanced Michelson interferometer and apply the developed formalism to the case of distance metrology. Due to group velocity dispersion, the position of the brightest fringe of the correlation pattern, which is used for distance determination, cannot be derived by simply using the definition of group refractive index of the dispersive medium. It is shown that the discrete spectrum of the optical frequency comb gives rise to correlation functions which can be represented by a series, namely a discrete correlation series. We have developed a general formalism, valid for any pulse train, extending the discrete model to a continuous model of cross-correlation functions using the Poisson summation. Our model is relevant for any offset and repetition frequency of the frequency comb. From the continuous cross-correlation model we show that, even for a homogeneous dispersive medium the position of the brightest fringe varies nonlinearly for small delay distances and stabilizes for longer ones. We have compared the theoretical results to measurements of pulse propagation in air for path-lengths up to 200 m.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Higher-order phase shift reconstruction approach

Purpose: Biological soft tissues encountered in clinical and preclinical imaging mainly consists of atoms of light elements with low atomic numbers and their elemental composition is nearly uniform with little density variation. Hence, x-ray attenuation contrast is relatively poor and cannot achieve satisfactory sensitivity and specificity. In contrast, x-ray phase-contrast provides a new mechanism for soft tissue imaging. The x-ray phase shift of soft tissues is about a thousand times greater than the x-ray absorption over the diagnostic x-ray energy range, yielding a higher signal-to-noise ratio than the attenuation contrast counterpart. Thus, phase-contrast imaging is a promising technique to reveal detailed structural variation in soft tissues, offering a high contrast resolution between healthy and malignant tissues. Here the authors develop a novel phase retrieval method to reconstruct the phase image on the object plane from the intensity measurements. The reconstructed phase image is a projection of the phase shift induced by an object and serves as input to reconstruct the 3D refractive index distribution inside the object using a tomographic reconstruction algorithm. Such x-ray refractive index images can reveal structural features in soft tissues, with excellent resolution differentiating healthy and malignant tissues. Methods: A novel phase retrieval approach is proposed to reconstruct an x-ray phase image of an object based on the paraxial Fresnel-Kirchhoff diffraction theory. A primary advantage of the authors' approach is higher-order accuracy over that with the conventional linear approximation models, relaxing the current restriction of slow phase variation. The nonlinear terms in the autocorrelation equation of the Fresnel diffraction pattern are eliminated using intensity images measured at different distances in the Fresnel diffraction region, simplifying the phase reconstruction to a linear inverse problem. Numerical experiments are performed to demonstrate the accuracy and stability of the proposed approach. Results: The proposed reconstruction formula is a generalization of the transport of intensity equation (TIE). It has the second-order accuracy compared to the linear model used in the conventional phase retrieval approach. The numerical experiments demonstrate that the accuracy and stability of the proposed phase reconstruction method outperforms the TIE-based reconstruction method. Conclusions: A novel approach has been proposed to retrieve an x-ray phase shift image induced by an object from intensity images measured at different distances in the Fresnel diffraction region. The authors' approach has the second-order accuracy and is able to retrieve the phase shift of an object stably, overcoming the restriction of slow phase variation assumed by the conventional phase retrieval techniques.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Influence of pH condition on colloidal suspension of exfoliated graphene oxide by electrostatic repulsion

A facile chemical process is described to produce graphene oxide utilizing a zwitterions amino acid intermediate from graphite oxide sheets. 11-aminoundecanoic acid molecules were protonated to intercalate molecules into the graphite oxide sheets to achieve ion exchange, and the carboxyl groups were then ionized in a NaOH solution to exfoliate the graphite oxide sheets. In this way, the produced graphene oxide nanosheets were stably dispersed in water. The delaminated graphene nanosheets were confirmed by XRD, AFM, and TEM. XRD patterns indicated the d{sub 002}-spacing of the graphite greatly increased from 0.380 nm and 0.870 nm. AFM and TEM images showed that the ordered graphite crystal structure of graphene nanosheets was effectively exfoliated by this method. The prepared graphene nanosheets films showed 87.1% transmittance and a sheet resistance of 2.1 Multiplication-Sign 10{sup 3} {Omega}/square. - Graphical abstract: A stable graphene oxide suspension could be quickly prepared by exfoliating a graphite oxide suspension by a host-guest electrostatic repulsion in aqueous solution. Highlights: Black-Right-Pointing-Pointer Graphene nanosheets were prepared by a zwitterions amino acid intermediate from graphite oxide. Black-Right-Pointing-Pointer 11-aminoundecanoic acid was protonated to intercalate molecules into the graphene oxide to achieve ion exchange. Black-Right-Pointing-Pointer The d{sub 002}-spacing of the graphite oxide greatly increased from 0.330 nm to 0.415 nm after 11-aminoundecanoic acid treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗