Search NASA⌕ Search

SEARCH · Search NASA

Results for “data base for model validation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Newly Available Single Field-of-view Sounder Atmospheric Product (SiFSAP) and Its Derivative Product

The Single Field-of-view Sounder Atmospheric product (SiFSAP) has been developed and delivered to NASA GES DISC. The SiFSAP Algorithm Theoretical Basis Documents (ATBD) and users manuals are ready to be released to public. This novel data product supplements other operational products such as AIRS version 7 and the Community Long-term Infrared Microwave Combined Atmospheric Product System (CLIMCAPS) from two main perspectives: 1) improving the spatial resolution of sounder Level-2 data to extend its usage in weather and dynamics focus area; 2) establishing radiance closure between Level-2 data and directly measured Level-1 radiances to facilitate the climate trend analysis. SiFSAP has 3-times higher spatial resolution and 9-times denser data products comparing to current NASA and NOAA operational IR sounder products. SiFSAP is derived using the optimal estimation method based physical retrieval algorithm. The Principal Component-based Radiative Transfer Model (PCRTM) which includes the cloud scattering simulation is used for the forward model so that the solution can fit the spectral radiances under all-sky conditions for individual single field-of-view (SFOV) measurements. A general introduction of the SiFSAP algorithm and corresponding validation work will be presented. Also introduced here is the Climate Fingerprinting Sounder product (ClimFiSP) that is the derivative product of SiFSAP and will be released in the near future. The ClimFiSP algorithm uses pre-constructed fingerprinting relationship to achieve a low-latency Level-3 data production and facilitate the fusion of data of different sounders.

Wan Wu↗

Measurements and Computations of the Turbulent Corner Flow on the NASA Juncture-Flow Model with a Symmetric Wing

The NASA Juncture Flow experiment is designed to acquire high-quality flowfield data deep in the corner of a wing-fuselage junction specifically for the purpose of computational fluid dynamics (CFD) validation and turbulence model improvement. This paper will present and discuss the results of a recent experiment with the juncture-flow model in the NASA Langley 14- by 22-Foot Subsonic Tunnel. The main objective of that test was to expand the existing juncture-flow dataset with a symmetric wing case that displays fully attached, incipient separation, and separated flow in the corner of the wing-fuselage junction, depending on the model pitch angle. Laser Doppler velocimetry (LDV) measurements were made at three model pitch angles (0 deg: fully attached, 1 deg: incipient separation, and 5 deg: separated flow) and for each one, mean-flow and Reynolds-stress data was obtained on the fuselage and at several streamwise locations along the corner of the wing-fuselage junction. Supporting measurements were made during the test campaign and included model and tunnel wall static pressures, tunnel wall and ceiling boundary-layer rake data, oil-flow visualizations, and laser-based measurements of the as-built model geometry and model position in the test section. Comparisons between the experimental data and Reynolds averaged Navier-Stokes CFD results will also be presented and discussed.

Juncture Flow↗

Measurements and Computations of the Turbulent Corner Flow on the NASA Juncture-Flow Model with a Symmetric Wing

The NASA Juncture Flow experiment is designed to acquire high-quality flowfield data deep in the corner of a wing-fuselage junction specifically for the purpose of computational fluid dynamics (CFD) validation and turbulence model improvement. This paper will present and discuss the results of a recent experiment with the juncture-flow model in the NASA Langley 14- by 22-Foot Subsonic Tunnel. The main objective of that test was to expand the existing juncture-flow dataset with a symmetric wing case that displays fully attached, incipient separation, and separated flow in the corner of the wing-fuselage junction, depending on the model pitch angle. Laser Doppler velocimetry (LDV) measurements were made at three model pitch angles (0 deg: fully attached, 1 deg: incipient separation, and 5 deg: separated flow) and for each one, mean-flow and Reynolds-stress data was obtained on the fuselage and at several streamwise locations along the corner of the wing-fuselage junction. Supporting measurements were made during the test campaign and included model and tunnel wall static pressures, tunnel wall and ceiling boundary-layer rake data, oil-flow visualizations, and laser-based measurements of the as-built model geometry and model position in the test section. Comparisons between the experimental data and Reynolds averaged Navier-Stokes CFD results will also be presented and discussed.

Juncture Flow↗

A Design Tool for Liquid Rocket Engine Injectors

A practical design tool for the analysis of flowfields near the injector face has been developed and used to analyze the Fastrac engine. The objective was to produce a computational design tool which was detailed enough to predict the interactive effects of injector element impingement angles and points and the momenta of the individual orifice flows. To obtain a model which could be used to simulate a significant number of individual orifices, a homogeneous computational fluid dynamics model was developed. To describe liquid and vapor sub- and super-critical flows, the model included thermal and caloric equations of state which were valid over a wide range of pressures and temperatures. A homogeneous model was constructed such that the local state of the flow was determined directly, i.e. the quality of the flow was calculated. Such a model does not identify drops or their distribution, but it does allow the flow along the injector face and into the acoustic cavity to be predicted. It also allows the film coolant flow to be accurately described. The initial evaluation of the injector code was made by simulating cold flow from an unlike injector element and from a like-on-like overlapping fan (LOL) injector element. The predicted mass flux distributions of these injector elements compared well to cold flow test results. These are the same cold flow tests which serve as the data base for the JANNAF performance prediction codes. The flux distributions 1 inch downstream of the injector face are very similar; the differences were somewhat larger at further distances from the faceplate. Since the cold flow testing did not achieve good mass balances when integrations across the entire fan were made, the CFD simulation appears to be reasonable alternative to future cold flow testing. To simulate the Fastrac, an RP-1/LOX combustion model must be chosen. This submodel must be relatively simple to accomplish three-dimensional, multiphase flow simulations. Single RP-1 pyrolysis and partial oxidation steps were chosen and the combustion was completed with the wet CO mechanism. Soot was also formed with a single global reaction. To validate the combustion submodel, global data from gas generator tests and from subscale motor test were used to predict qualitatively correct mean molecular weights, temperature, and soot levels. Because such tests do not provide general kinetics rates, the methodology is not necessarily appropriate for other than rocket type flows conditions. Soot predictions were made so that radiation heating to the motor walls can be made. These initial studies of the Fastrac were for a small region close to the injector face and chamber wall which included a segment of the acoustic cavity. The region analyzed includes 11 individual orifice holes to represent the LOL elements and the H2 film coolant holes. Typical results of this simulation are shown in Figure 1. At this point the only available test data to verify the predictions are temperatures measured in the acoustic cavity. These temperatures are in reasonable agreement at about 2000R (1111 K). Future work is expected to include improving the computational efficiency or the CFD model and/or using more computer capacity than the single Pentium PC with which these simulations were made.

Farmer, Richard C.↗

Nanoindentation mapping defects filtration for heterogeneous materials using generative adversarial networks

Advanced composite materials with multiple phases and heterogeneous microstructure necessitate spatial mapping characterization of elastic modulus to develop constitutive relations and overall mechanical response. Such modulus mapping can be obtained using the nanoindentation technique, where the indenter tip raster over the selected microstructure region. Typically, a surface preparation procedure is done in the specimens to ensure proper contact between the indenter tip and sample surface. However, a near-perfect surface finish is unachievable in heterogeneous materials, primarily with ceramic reinforcements, due to the differential material removal rate during polishing. Thus, the nanoindenter records localized erroneous measurements due to differences in surface roughness and corresponding force response. This study establishes a novel deep learning-based strategy to rectify incorrect experimental spatial measurements acquire during nanoindentation modulus mapping. Here, the integrated bicubic interpolation and generative adversarial networks (GANs) model was trained using 14 ceramic and 18 metallic data sets, each comprising 65,536 measurements. The developed algorithm was validated against experimental measurements on four unknown specimens. The standard deviation in measured elastic modulus reduces by ~50% in ceramics and ~72% in metallic samples. This computational framework proposes a novel approach to reducing uncertainty in materials’ properties using state-of-the-art computer vision techniques.

36 MATERIALS SCIENCE↗

Simulation of kinematic Kikuchi diffraction patterns from atomistic structures

One of the limitations of atomistic simulations is that many of the computational tools used to extract structural information from atomic trajectories provide metrics that are not directly compatible with experiments for validation. In this work, to bridge between simulation and experiment, a method is presented to produce simulated Kikuchi diffraction patterns using data from atomistic simulations, without requiring a priori specification of the crystal structure or defect periodicity. The Kikuchi pattern simulation is based on the kinematic theory of diffraction, with Kikuchi line intensities computed via a discrete structure factor calculation. Reciprocal lattice points are mapped to Kikuchi lines using a geometric projection of the reciprocal space data. This method is validated using single crystal atomistic models, and the novelty of this approach is emphasized by simulating kinematic Kikuchi diffraction patterns from an atomistic model containing a nanoscale dislocation loop. Deviations in kinematic Kikuchi line intensities are explained considering the displacement field of the dislocation loop, as is done in diffraction contrast theory.

42 ENGINEERING↗

Modeling Terrestrial Dissolved Organic Carbon Loading to Western Arctic Rivers

The mobilization and land-to-ocean transfer of dissolved organic carbon (DOC) in Arctic watersheds is intricately linked with the region's climate and water cycle, and furthermore at risk of changes from climate warming and associated impacts. This study quantifies model-simulated estimates of runoff, surface and active layer leachate DOC concentrations and loadings to western Arctic rivers, specifically for basins that drain into coastal waters between and including the Yukon and Mackenzie Rivers. Model validation leverages data from other field measurements, synthesis studies, and modeling efforts. The simulations effectively quantify DOC leaching in surface and subsurface runoff and broadly capture the seasonal cycle in DOC concentration and mass loadings reported from other studies that use river-based measurements. A marked east-west gradient in simulated spring and summer DOC concentrations of 24 drainage basins on the North Slope of Alaska is captured by the modeling, consistent with independent data derived from river sampling. Simulated loadings for the Mackenzie and Yukon show reasonable agreement with estimates of DOC export for annual totals and four of the six seasonal comparisons. Nearly equivalent loading occurs to rivers which drain north to the Beaufort Sea and west to the Bering and Chukchi Seas. The modeling framework provides a basis for understanding carbon export to coastal waters and for assessing impacts of hydrological cycle intensification and permafrost thaw with ongoing warming in the Arctic.

54 ENVIRONMENTAL SCIENCES↗

Analytical model of electron transport in polycrystalline, degenerately doped ZnO films

An analytical description of the charge carrier transport, valid for non-degenerated and degenerated semiconductors, was developed, critically reviewed, and fitted to the temperature-dependent Hall mobility data of magnetron sputtered, degenerately doped ZnO:Al films. Our extended model for grain boundary scattering in semiconductors of arbitrary degeneracy is based on previous models from literature and suitable to describe the Hall mobility of the carriers as a function of the free carrier concentration and the temperature at the same time. It is mathematically simple enough for a fast fit procedure, which is not possible with most of the previous models. Applying a combined transport model consisting of ionized impurity scattering, phonon scattering, and grain boundary scattering in degenerate semiconductors, we were able to determine the trap density at the grain boundaries Nₜ ≈ 3×10¹³ to 5×10¹³cm⁻² and the deformation potential E{sub ac} in the range of 5 eV to 9 eV depending on the details of the transport model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pricing Strategy of Electric Vehicle Aggregators Based on Locational Marginal Price to Minimize Photovoltaic (PV) Curtailment

The global climate crisis demands urgent action to mitigate global warming. Using renewable energy sources, such as solar and wind power, for electricity generation is crucial. This shift from centralized to distributed power systems, however, brings challenges, including voltage fluctuations and renewable energy curtailment. The rapid growth of the electric vehicle (EV) industry adds complexity, increasing overall electricity demand and straining the power supply during peak charging times. This paper proposes a scheduling strategy for EV aggregators to reduce renewable energy curtailment and stabilize grid operation by strategically scheduling EV charging. Using Multi -Agent Transport Simulation (MATSim), a traffic simulation tool, EV driving data in Denver, Colorado, USA, were modeled. The EV aggregator adjusts charging fees based on locational marginal prices, encouraging EVs to charge at different stations according to pricing. Simulations on an IEEE 33-bus system with distributed energy resources and EV charging stations validate the proposed algorithm, demonstrating its effectiveness in reducing curtailment by 12.55% and stabilizing grid operation.

33 ADVANCED PROPULSION SYSTEMS↗

An Experimental and Chemical Kinetics Study of the Combustion of Syngas and High Hydrogen Content Fuels

An integrated and collaborative effort involving experiments and complementary chemical kinetic modeling investigated the effects of significant concentrations of water and CO 2 and minor contaminant species (methane [CH 4 ], ethane [C 2 H 6 ], NOX, etc.) on the ignition and combustion of HHC fuels. The research effort specifically addressed broadening the experimental data base for ignition delay, burning rate, and oxidation kinetics at high pressures, and further refinement of chemical kinetic models so as to develop compositional specifications related to the above major and minor species. The foundation for the chemical kinetic modeling was the well validated mechanism for hydrogen and carbon monoxide developed over the last 25 years by Professor Frederick Dryer and his co-workers at Princeton University. This research furthered advance the understanding needed to develop practical guidelines for realistic composition limits and operating characteristics for HHC fuels. A suite of experiments was utilized that that involved a high-pressure laminar flow reactor, a pressure-release type high-pressure combustion chamber and a high-pressure turbulent flow reactor.

10 SYNTHETIC FUELS↗

Utilizing Physics-Informed Synthetic Data to Train a Digital Twin for Predicting Reactor Operations

Understanding techniques to strengthen the nuclear nonproliferation regime is crucial in reducing the creation of nuclear weaponry on the basis of advancements in the nuclear energy industry. Prior to construction of a nuclear power plant, it is necessary to understand the proliferation potential of the plant’s reactor. Digital twins serve as a unique solution to recognizing reactor behavior indicative of nuclear proliferation. The following research conducted serves as a validation to training a digital twin on synthetic data fabricated via means of reactor physics simulations based on parameters of Idaho State University’s AGN-201 reactor. The synthetic data is utilized to train a long short-term memory (LSTM) recurrent neural network model. The accuracy of the predicted data is measured against real operational data to verify the reliability of the synthetic data creation methods and if these methods should be used in the future to inform inspectors of a reactor’s proliferation capabilities.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Rarefied aerodynamics and upper atmospheric flight results from the Orbiter High Resolution Accelerometer Package experiment

Data from the High Resolution Accelerometer Package (HiRAP) experiment on the Space Shuttle Orbiter have been analyzed for 10 flights to produce lift-drag (L/D) ratios in the free molecule, transition, and continuum flow flight regimes. Freestream density is also obtained in the altitude range from 60 km to 160 km using an aerodynamic model based upon earlier flight analysis of accelerometer data. The results of the L/D analysis of the latest four flights have been compared with the aerodynamic model developed from the first six HiRAP missions. The new data agree with the established flight-derived model, thereby validating earlier analysis. However, the arithmetic mean of the 10 flight-derived L/D values in the free molecular flow regime is 0.053 (+ or - 0.1) as compared to the initial value of 0.10 (+ or - 0.3), determined from STS-6. Updates to the Orbiter aerodynamic model values and calibration factors have been incorporated into the density calculations for all 10 flights to provide realistic absolute density. The derived density altitude profiles, which have been normalized to the U.S. Standard Atmosphere 1976, are characterized by a large amplitude wave pattern relative to the standard as seen in the initial flight analysis.

Blanchard, R. C.↗

A preliminary tidal analysis of TOPEX/POSEIDON altimetry

Approximately 12 months of data from the TOPEX/POSEIDON satellite altimeter mission are analyzed for the major short-period oceanic tides. A harmonic analysis is performed on data captured within bins defined on a deep-ocean grid, which, owing to tidal aliasing considerations, must have a relatively coarse spatial resolution. Our analysis is in terms of corrections to the Schwiderski and Cartwright-Ray models, and it confirms many of the Schwiderski differences previously reported by Cartwright and Ray. Our differences with respect to the Geosat-based Cartwright and Ray model form a sectorial pattern in M(sub 2) with high/low differences separated roughly 180 deg in longitude. We suggest that these sectorial errors were most likely induced by Geosat's relatively large orbit error. Comparisons to independent data validate the improved TOPEX/POSEIDON solutions; in-situ 'ground truth' shows M(sub 2) root mean square (RMS) differences of 4.10 cm (Schwiderski), 3.86 cm (cartwright and Ray), 2.63 cm (this paper). Global rates of energy dissipation confirm earlier estimates for M(sub 2), and show improved agreement with satellite tracking studies for K(sub 1) and S(sub 2). These preliminary exercises confirm that TOPEX/POSEIDON should results in a new generation of improved global tidal models.

Schrama, E. J. O.↗

Overset Grid Methods for Multidisciplinary Applications in Rotorcraft Problems

A methodology for the coupling of an advanced computational fluid dynamics method based on an overset grid flow-solver and an advanced computational structural dynamics method based on a finite element analysis is presented. Various procedures for the fluid-structure interactions modeling along with their limitations are also discussed. The flight test data for the four-bladed UH-60A Blackhawk helicopter rotor is chosen for the validation of the results. Convergence and accuracy are tested by numerical experiments with a single-bladed rotor. A comparison of airload predictions with flight test data as well as with a rigid blade case is presented. Grid and interpolation related issues for this aeroelastic application are described.

Ahmad, J. U.↗

Comparison of Flow-Dependent and Static Error Correlation Models in the DAO Ozone Data Assimilation System

In a data assimilation system the forecast error covariance matrix governs the way in which the data information is spread throughout the model grid. Implementation of a correct method of assigning covariances is expected to have an impact on the analysis results. The simplest models assume that correlations are constant in time and isotropic or nearly isotropic. In such models the analysis depends on the dynamics only through assumed error standard deviations. In applications to atmospheric tracer data assimilation this may lead to inaccuracies, especially in regions with strong wind shears or high gradient of potential vorticity, as well as in areas where no data are available. In order to overcome this problem we have developed a flow-dependent covariance model that is based on short term evolution of error correlations. The presentation compares performance of a static and a flow-dependent model applied to a global three- dimensional ozone data assimilation system developed at NASA s Data Assimilation Office. We will present some results of validation against WMO balloon-borne sondes and the Polar Ozone and Aerosol Measurement (POAM) III instrument. Experiments show that allowing forecast error correlations to evolve with the flow results in positive impact on assimilated ozone within the regions where data were not assimilated, particularly at high latitudes in both hemispheres and in the troposphere. We will also discuss statistical characteristics of both models; in particular we will argue that including evolution of error correlations leads to stronger internal consistency of a data assimilation ,

Wargan, K.↗

Laboratory Measurement of Bidirectional Reflectance of Radiometric Tarps

Objectives: a) To determine the magnitude of radiometric tarp BRDF; b) To determine whether an ASD FieldSpec Pro spectroradiometer can be used to perform the experiment. Radiometric tarps with nominal reflectance values of 52%, 35%, and 3.5%, deployed for IKONOS. QuickBird, and OrbView-3 overpasses Ground-based spectroradiometric measurements of tarp and Spectralon@ panel taken during overpass using ASD FieldSpec Pro spectroradiometer, and tarp reflectance calculated. Reflectance data used in atmospheric radiative transfer model (MODTRAN) to predict satellite at-sensor radiance for radiometric calibration. Reflectance data also used to validate atmospheric correction of high-spatial-resolution multispectral image products

Knowlton, Kelly↗

An Investigation into the Effect of Liquid Accumulation on Thermo-Physiologic State using an Advanced Moisture Model Coupled with a High Resolution Human Thermal Model

A physics-based mathematical model for simulating heat and moisture transport on the skin and within clothing was developed to improve the accuracy of human thermal modeling predictions. In a previous study, a set of sweating hotplate experiments was specifically created to obtain test data for model validation. The clothing moisture model was subsequently coupled with a human thermal model and tested by simulating human experiments described in the open literature, which served to verify the model’s ability to predict whole body thermo-physiologic state in work-rest cycles during which sweating was known to occur. In this study, a human subject test was specifically designed to validate the model’s ability to predict local and whole body sweat evaporation and accumulation on the surface of the body. The human subject test incorporated twelve clothed male subjects of moderate physical fitness, ages 18-30, which were prescribed a work-rest cycle in a climate-controlled chamber (25 °C, 50% RH). Two activity levels were considered during the active stage (4 MET vs. 6.5 MET), and two sets of ending ambient conditions were considered for the final rest stage (25 °C vs. 15 °C, 50% RH). Model predictions were compared to the measured local skin temperatures, core temperatures, and whole body sweat losses. In general, the model was able to reproduce the trends observed in the human subject trial, but more importantly, provided insight into how dynamic changes in liquid content can impact the evolution of local and whole body thermo-physiologic state. This study demonstrates the ability of an advanced moisture model to capture distinct physics attributable to moisture accumulation, allowing for increased accuracy in predicting human thermal state and for interpreting the results of measurements derived from human subject tests.

human thermal model↗

Computational Fluid Dynamics Combustion Modeling for Rotating Detonation Engines

This paper focuses on the development and validation of a combustion model for Computational Fluid Dynamics (CFD) modeling of Rotating Detonation Engines. A zero-dimensional Partially Stirred Reactor (PaSR) with a detailed chemical kinetic mechanism for hydrogen and air is used to model turbulent combustion. The model is computationally efficient and is based on the notion of partial mixing at the sub-grid level with turbulent exchange between mixed and unmixed regions. The ability of the PaSR model to accurately represent both detonative and deflagrative combustion is assessed by validating the results against experimental data. The effects of mesh resolution on the solution are also studied in order to determine if a mesh independent solution is obtainable with the Large Eddy Simulation (LES) approach to modeling turbulence. A comparison is made between the PaSR model and simply ignoring turbulence chemistry interactions which assumes that all species are perfectly mixed at the sub-grid level.

Strakey, Peter↗