Search NASA⌕ Search

SEARCH · Search NASA

Results for “data dependencies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Low Mach number two-dimensional hydrodynamic turbulence - Energy budgets and density fluctuations in a polytropic fluid

Theory suggests that three distinct types of turbulence can occur in the low Mach number limit of polytropic flow: nearly incompressible flows dominated by vorticity, nearly pure acoustic turbulence dominated by compression, and flows characterized by near statistical equipartition of vorticity and compressions. Distinctions between these kinds of turbulence are investigated here by direct numerical simulation of two-dimensional compressible hydrodynamic turbulence. Dynamical scalings of density fluctuations, examination of the ratio of transverse to longitudinal velocity fluctuations, and spectral decomposition of the fluctuations are employed to distinguish the nature of these low Mach number solutions. A strong dependence on the initial data is observed, as well as a tendency for enhanced effects of compressibility at later times and at higher wave numbers, as suggested by theories of nearly incompressible flows.

Ghosh, S.↗

Nonlinear symmetric instability and intraseasonal oscillations in the tropical atmosphere

Symmetric inertial instability (SII) is studied as a mechanism for stratospheric and tropospheric phenomena in the equatorial regions. The linear and nonlinear dynamics of SII in a two-layer, zonally symmetric model on an equatorial beta plane, in the presence of a basic flow with horizontal and vertical shear, with and without dissipative effects are investigated. Linear symmetric instabilities are, in accordance with previously published results, purely exponential, that is, nonoscillatory. Nonlinear SII, studied here for the first time on a planetary scale, can produce finite-amplitude oscillatory behavior, periodic or chaotic. The period of oscillations in the inviscid case depends on the initial data. In the presence of dissipative effects, all solutions tend to a limit cycle or to a strange attractor. The dominant period in this case, over a wide range of parameters and whether vertical shear is present or not, is in the intraseasonal, 20-30-day range. It appears therefore that nonlinear SII might be a contributing mechanism to low-frequency oscillations in the tropical atmosphere.

Zhao, J.-X.↗

Unsteady flows

The development status of tactical missile dynamic behavior prediction is evaluated, with a view to the formulation of guidelines for high angle-of-attack tests where highly nonlinear aerodynamics are encountered and strong cross-coupling arises between lateral and longitudinal degrees of freedom. Attention is given to the Ericsson (1979) inviscid computer code, which is entirely general within the geometric constraints of axisymmetry and low aspect ratio lifting surfaces. A serious problem in the prediction of full-scale high-alpha dynamics is the almost total dependence on subscale experimental data, whose use is severely restricted by Reynolds number scaling as well as by model support and wind tunnel wall interference.

Ericsson, L. E.↗

GRIS instrument continuum results from SN1987A

Results on the continuum emission from SN1987A from two balloon flights of gamma-ray imaging spectrometer over Alice Springs, Australia, in the spring and fall of 1988 are presented. The durations of the two observations were 11.2 and 11.7 hours, respectively. The measured continuum spectra (95-2560 keV for the spring and 55-2560 keV for the fall) are consistent with Compton scattering of the Co-56 decay lines. The 10HMM model agrees well with continuum data in the energy dependence of the continuum both in the slope of the spectra and the step increases below the 2599, 1238, and 847 keV Co-56 decay lines.

Barthelmy, S.↗

Lateral variations in lower mantle seismic velocity

To obtain a theoretical model which provides a rationale for the observed high values of velocity variations, the effect of a 0.1 to 0.2 percent partially molten volatile-rich material in various geometries which are heterogeneously dispersed in the lower mantle is examined. Data obtained indicate that, depending on aspect ratio and geometry, 0.1-0.2 percent partial melting in conjunction with about 100 K thermal anomalies can explain the seismic variations provided the compressibility of the melt differs by less than about 20 percent from the surrounding solid.

Duffy, Thomas S.↗

Role of secondary instability theory and parabolized stability equations in transition modeling

In modeling the laminar-turbulent transition region, the designer depends largely on benchmark data from experiments and/or direct numerical simulations that are usually extremely expensive. An understanding of the evolution of the Reynolds stresses, turbulent kinetic energy, and quantifies in the transport equations like the dissipation and production is essential in the modeling process. The secondary instability theory and the parabolized stability equations method are used to calculate these quantities, which are then compared with corresponding quantities calculated from available direct numerical simulation data for the incompressible boundary-layer flow of laminar-turbulent transition conditions. The potential of the secondary instability theory and the parabolized stability equations approach in predicting these quantities is discussed; results indicate that inexpensive data that are useful for transition modeling in the early stages of the transition region can be provided by these tools.

El-Hady, Nabil M.↗

Observations of time variation in the sun's rotation

Observations of solar p-mode frequency splittings obtained at Big Bear Solar Observatory in 1986 and during 1988-90 reveal small (about 1 percent) changes in the sun's subsurface angular velocity with solar cycle. An asymptotic inversion of the splitting data yields the latitude dependence of the rotation rate and shows that the largest changes in the angular velocity, about 4 nanoHz, occurred between 1986 and the later years, at high (about 60 deg) solar latitudes. Earlier helioseismic observations suggest that solar cycle changes in the ratio of magnetic to turbulent pressure in the solar convection zone are large enough to account for the magnitude of the observed angular velocity variations, but a detailed model of the phenomenon does not exist.

Woodard, M. F.↗

Chemical vapor deposition coatings for oxidation protection of titanium alloys

Results of an experimental investigation of the oxidation protection afforded to Ti-14Al-21Nb and Ti-14Al-23Nb-2V titanium aluminides and Ti-17Mo-3Al-3Nb titanium alloy by aluminum-boron-silicon and boron-silicon coatings are presented. These coatings are applied by a combination of physical vapor deposition (PVD) and chemical vapor deposition (CVD) processes. The former is for the application of aluminum, and the latter is for codeposition of boron and silicon. Coating thickness is in the range of 2 to 7 microns, and coating weights are 0.6 to 2.0 mg/sq cm. Oxidation testing was performed in air at temperatures to 1255 K in both static and hypersonic flow environments. The degree of oxidation protection provided by the coatings is determined from weight change measurements made during the testing and post test compositional analyses. Temperature-dependent total normal emittance data are also presented for four coating/substrate combinations. Both types of coatings provided excellent oxidation protection for the exposure conditions of this investigation. Total normal emittances were greater than 0.80 in all cases.

Cunnington, G. R.↗

An improved model of the Earth's gravity field - GEM-T3

An improved model of the Earth's gravitational field is developed from a combination of conventional satellite tracking, satellite altimeter measurements, and surface gravimetric data (GEM-T3). This model gives improved performance for the computation of satellite orbital effects as well as a superior representation of the geoid from that achieved in any previous Goddard Earth Model. The GEM-T3 model uses altimeter data directly to define the orbits, geoid, and dynamic height fields. Altimeter data acquired during the GEOS-3 (1975-1976), SEASAT (1978), and GEOSAT (1986-1987) missions were used to compute GEM-T3. In order to accommodate the non-gravitational signal mapped by these altimeters, spherical harmonic models of the dynamic height of the ocean surface were recovered for each mission simultaneously with the gravitational field. The tracking data utilized in the solution includes more than 1300 arcs of data encompassing 31 different satellites. The observational data base is highly dependent on SLR, but also includes TRANET Doppler, optical, S-Band average range-rate and satellite-to-satellite tracking acquired between ATS-6 and GEOS-3. The GEM-T3 model has undergone extensive error calibration.

Nerem, R. S.↗

Design of multisample, multistep phase partitioning apparatus for use on Space Shuttle Spacelab, and Spacelab missions

Traditional separation techniques are inadequate for many new bioprocessing challenges. Innovative separation methods such as aqueous two phase partitioning are needed to perpetuate bioprocess commercialization. Aqueous two phase polymer partitioning systems provide a process for separating biological materials when combined with microgravity. An innovative space qualified apparatus developed for carrying out separations by partitioning in immiscible polymer systems under mirogravity conditions is described. The apparatus offers an innovative approach to low gravity bioseparations in general and phase partitioning in particular. These capabilities support NASA's interest in serving the biotechnology research community and providing quantitative data in the gravity dependent components of separation processes.

Deuser, Mark S.↗

Experience with parametric binary dissection

Parametric Binary Dissection (PBD) is a new algorithm that can be used for partitioning graphs embedded in 2- or 3-dimensional space. It partitions explicitly on the basis of nodes + (lambda)x(edges cut), where lambda is the ratio of time to communicate over an edge to the time to compute at a node. The new algorithm is faster than the original binary dissection algorithm and attempts to obtain better partitions than the older algorithm, which only takes nodes into account. The performance of parametric dissection with plain binary dissection on 3 large unstructured 3-d meshes obtained from computational fluid dynamics and on 2 random graphs were compared. It was showm that the new algorithm can usually yield partitions that are substantially superior, but that its performance is heavily dependent on the input data.

Bokhari, Shahid H.↗

Applications of interferometrically derived terrain slopes: Normalization of SAR backscatter and the interferometric correlation coefficient

Terrain slopes, which can be measured with Synthetic Aperture Radar (SAR) interferometry either from a height map or from the interferometric phase gradient, were used to calculate the local incidence angle and the correct pixel area. Both are required for correct thematic interpretation of SAR data. The interferometric correlation depends on the pixel area projected on a plane perpendicular to the look vector and requires correction for slope effects. Methods for normalization of the backscatter and interferometric correlation for ERS-1 SAR are presented.

Werner, Charles L.↗

Role of small ice crystals in radiative properties of cirrus: A case study, FIRE II, November 22, 1991

Aircraft observations of cirrus cloud were made near Coffeyville, Kansas, during November 1991 as part of the First ISCCP Regional Experiment II (FIRE II) project. Cloud ice particle spectra measurements were made using both a particle measuring system (PMS) 2DC probe and an ice particle replicator. Particles larger than 200 micrometers were column rosettes. The replicator shows the presence of large numbers of ice crystals smaller than 66 micrometers (two PMS size bins) that are not recorded by the PMS 2DC probe. Calculations based on the replicator data of the geometrical blocked area and absorption cross section of the cloud per unit volume show that small particles can contribute significantly to and sometimes dominate both the solar extinction and the infrared emission. Intercomparison is made of the ice particle size, area, and mass distributions determined by these different instruments. Power law relationships for area occluded by a crystal as a function of crystal maximum dimension were computed from the PMS 2DC data. The wavelength-dependent infrared absorption cross section per volume was computed using a simple model based on anomalous diffraction and area and mass dimensional relationships for the ice crystals.

Arnott, W. Patrick↗

Variation of lunar sodium emission intensity with phase angle

We report new measurements of the sodium emission intensity seen in a line of sight just above the surface of the Moon. These data show a strong dependence on lunar phase. The emission intensity decreases from a maximum around first quarter (phase angle 90 deg) to very small values near full Moon (phase angle 0 deg). This suggests that the rate of sodium vapor production from the lunar surface is largest at the subsolar point and becomes small near the terminator. However, the sodium emission near full Moon falls below that which would be expected for solar photon-driven processes. Since the solar wind flux decreases substantially when the Moon enters the Earth's magnetotail near full Moon, while the global solar photon flux is undiminished, we suggest that solar wind sputtering is the dominant process for sodium production.

Potter, A. E.↗

Stability of the Martian atmosphere: Is heterogeneous catalysis essential?

A comprehensive homogeneous gas phase photochemical model is developed to study the problem of stability of the Martian atmosphere. The one-dimensional model extends from the ground up to 220 km, passing through the homopause at 125 km. The model thus couples the lower (neutral) atmosphere to the ionosphere above which provides significant downward flux of carbon monoxide and oxygen atoms. It is concluded on the basic of currently accepted values for globally and seasonally averaged water vapor abundance, dust opacity and the middle atmospheric eddy mixing coefficient, as well as the relevant laboratory data (particularly the temperature dependence of CO2 absorption cross section and the rate constant for CO+OH reaction), that the rate of re-formation of carbon dioxide exceeds its photolytic destruction rate by about 40%. Furthermore, it is found that this result is virtually independent of the choice of eddy mixing coefficient, unless its value in the middle atmosphere exceeds 10(exp 8) sq cm/sec or is far smaller than 10(exp 5)sq cm/sec, or the dust opacity, unless it exceeds unity, or the water vapor mixing ratio at the surface, unless it is far smaller (less than or = 1 ppm) or far greater (greater than or = 500 ppm) than the average value (approximately 150 ppm). Since none of these extremes represent globally and seasonally averaged conditions on Mars, we propose that the present model requires existence of a mechanism to throttle down the recycling rate of carbon dioxide on Mars. Therefore, it is suggested that a heterogeneous process which provides a sink to the species that participate in the recycling of CO2, i.e., H2O, H2O2, OH, CO or O, in particular, may be necessary to bring about the balance between the CO2 recycling rate and its photolytic destruction rate. Aerosols of dust or ice (pure or doped water or carbon dioxide ice present in the atmosphere of Mars) can provide the appropriate adsorption sites for the above heterogeneous process. Despite our conclusion that some heterogeneous process may be needed, it is important to recognize that one-dimensional models can only provide first-order results which, most likely, represent globally and seasonally averaged conditions. However, it is only after actual temporal, latitudinal and longitudinal variations of relevant atmospheric parameters are included in the model that one can determine fuly whether the problem of atmospheric stabiltiy still continues to persist and whether some heterogeneous process is required to correct it.

Atreya, Sushil K.↗

Steering of Frequency Standards by the Use of Linear Quadratic Gaussian Control Theory

Linear quadratic Gaussian control is a technique that uses Kalman filtering to estimate a state vector used for input into a control calculation. A control correction is calculated by minimizing a quadratic cost function that is dependent on both the state vector and the control amount. Different penalties, chosen by the designer, are assessed by the controller as the state vector and control amount vary from given optimal values. With this feature controllers can be designed to force the phase and frequency differences between two standards to zero either more or less aggressively depending on the application. Data will be used to show how using different parameters in the cost function analysis affects the steering and the stability of the frequency standards.

Koppang, Paul↗

The Averaged Face Growth Rates of lysozyme Crystals: The Effect of Temperature

Measurements of the averaged or macroscopic face growth rates of lysozyme crystals are reported here for the (110) face of tetragonal lysozyme, at three sets of pH and salt concentrations, with temperatures over a 4-22 C range for several protein concentrations. The growth rate trends with supersaturation were similar to previous microscopic growth rate measurements. However, it was found that at high super-saturations the growth rates attain a maximum and then start decreasing. No 'dead zone' was observed but the growth rates were found to approach zero asymptotically at very low super-saturations. The growth rate data also displayed a dependence on pH and salt concentration which could not be characterized solely by the super-saturation. A complete mechanism for lysozyme crystal growth, involving the formation of an aggregate growth unit, mass transport of the growth unit to the crystal interface and faceted crystal growth by growth unit addition, is suggested. Such a mechanism may provide a more consistent explanation for the observed growth rate trends than those suggested by other investigators. The nutrient solution interactions leading to the formation of the aggregate growth unit may, thus, be as important as those occurring at the crystal interface and may account for the differences between small molecule and protein crystal growth.

Nadarajah, Arunan↗

Parallel NPARC: Implementation and Performance

Version 3 of the NPARC Navier-Stokes code includes support for large-grain (block level) parallelism using explicit message passing between a heterogeneous collection of computers. This capability has the potential for significant performance gains, depending upon the block data distribution. The parallel implementation uses a master/worker arrangement of processes. The master process assigns blocks to workers, controls worker actions, and provides remote file access for the workers. The processes communicate via explicit message passing using an interface library which provides portability to a number of message passing libraries, such as PVM (Parallel Virtual Machine). A Bourne shell script is used to simplify the task of selecting hosts, starting processes, retrieving remote files, and terminating a computation. This script also provides a simple form of fault tolerance. An analysis of the computational performance of NPARC is presented, using data sets from an F/A-18 inlet study and a Rocket Based Combined Cycle Engine analysis. Parallel speedup and overall computational efficiency were obtained for various NPARC run parameters on a cluster of IBM RS6000 workstations. The data show that although NPARC performance compares favorably with the estimated potential parallelism, typical data sets used with previous versions of NPARC will often need to be reblocked for optimum parallel performance. In one of the cases studied, reblocking increased peak parallel speedup from 3.2 to 11.8.

Townsend, S. E.↗