Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrode interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

The approach to equilibrium during tempering of a bulk nanocrystalline steel: an atom probe investigation

A local electrode atom probe has been used to analyze the solute partitioning during bainite transformation in a novel, nanocrystalline bainitic steel. Atom probe results show the absence of any partitioning of substitutional elements between the phases involved. The results are fully consistent with the diffusionless transformation of austenite to bainite. However, substitutional elements are expected to redistribute approaching an equilibrium phase boundary as the mixture of bainitic ferrite and retained austenite is tempered. The compositional analysis of the austenite/ferrite interface by atom probe tomography indicates that retained austenite decomposes during tempering before equilibrium is reached at the interface.

36 MATERIALS SCIENCE↗

Impact of Microporous Layer Roughness on Gas-Diffusion-Electrode-Based Polymer Electrolyte Membrane Fuel Cell Performance

This study explores the role of the gas diffusion media microporous layer (MPL) surface structure on the electrochemical properties of gas-diffusion-electrode (GDE)-based membrane electrode assemblies (MEAs). It has been shown that a thin ionomer layer on top of the GDE and hot pressing is needed to create good contact between the catalyst layer and the membrane. In this study, gas diffusion media with different MPL surface roughness were applied to fabricate GDE-based MEAs to understand how MPL roughness impacts the amount of ionomer overlayer required for maximum performance. Electron microscopy was employed to investigate MPL/catalyst layer and catalyst layer/membrane interfaces. In-situ performance testing was used to assess the impact of MPL roughness and ionomer overlayer on catalyst utilization and air polarization performance. We find that a smoother MPL surface required a thinner ionomer overlayer than gas diffusion media (GDM) with a rougher MPL surface to achieve a performance comparable to direct-coated catalyst-coated-membrane MEAs.

36 MATERIALS SCIENCE↗

Electrochemical solvent reorganization energies in the framework of the polarizable continuum model

Electron transfer reactions at electrochemical interfaces play a critical role in a wide range of catalytic processes. A key parameter in the rate constant expressions for such processes is the reorganization energy, which reflects the energetic cost of the solute and solvent rearrangements upon electron transfer. In this paper, we present dielectric continuum methods for calculating the solvent reorganization energy for electrochemical processes. We extend the simple approach in which the solute is represented as a point charge located a specified distance from the electrode surface to the representation of the solute as a collection of point charges corresponding to the partial atomic charges of the molecule. We also develop a method for calculating the electrochemical solvent reorganization energies with molecular-shaped cavities within the framework of the polarizable continuum model (PCM). The electronic and inertial responses of the solvent are separated according to their respective time scales, and two limiting cases of the relation between the solute and solvent electrons are examined. The effects of the electrode are included with the integral equations formalism PCM (IEF-PCM), in which the molecule-solvent boundary is treated explicitly, but the effects of the electrode-solvent boundary are included through an external Green’s function. This approach accounts for the effects of detailed molecular charge redistribution in a molecular-shaped cavity, as well as the electronic and inertial solvent responses and the effects of the electrode. The calculated total reorganization energies are in reasonable agreement with experimental measurements for a series of electrochemical systems. Inclusion of the effects of the electrode is found to be essential for obtaining even qualitatively accurate solvent reorganization energies. These approaches are applicable to a wide range of systems and can be extended to include other types of boundaries, such as a self-assembled monolayer or double layer separating the electrode and the molecule. This research was supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences.

Ghosh, Soumya↗

Proximity-magnetized quantum spin Hall insulator: monolayer 1 T’ WTe2/Cr2Ge2Te6

Abstract Van der Waals heterostructures offer great versatility to tailor unique interactions at the atomically flat interfaces between dissimilar layered materials and induce novel physical phenomena. By bringing monolayer 1 T’ WTe 2 , a two-dimensional quantum spin Hall insulator, and few-layer Cr 2 Ge 2 Te 6 , an insulating ferromagnet, into close proximity in an heterostructure, we introduce a ferromagnetic order in the former via the interfacial exchange interaction. The ferromagnetism in WTe 2 manifests in the anomalous Nernst effect, anomalous Hall effect as well as anisotropic magnetoresistance effect. Using local electrodes, we identify separate transport contributions from the metallic edge and insulating bulk. When driven by an AC current, the second harmonic voltage responses closely resemble the anomalous Nernst responses to AC temperature gradient generated by nonlocal heater, which appear as nonreciprocal signals with respect to the induced magnetization orientation. Our results from different electrodes reveal spin-polarized edge states in the magnetized quantum spin Hall insulator.

36 MATERIALS SCIENCE↗

Partially reduced Ru/RuO 2 composites as efficient and pH-universal electrocatalysts for hydrogen evolution

Efficient and long-term stable electrocatalysts for the hydrogen evolution reaction (HER) via water splitting are urgently desired to ease the energy crisis and develop the sustainability of human society. However, the HER performance of state-of-the-art Pt in non-acidic solutions is unsatisfactory due to the severely sluggish kinetics. In this work, DFT theoretical calculations reveal that the Ru/RuO 2 composites enable high HER activity to be pursued under non-acidic conditions because of the distinctive Ru and RuO 2 interface, which possess not only a strong capability to adsorb and dissociate water but also appropriate binding energies of H and OH. Therefore, we employ a simple strategy, including heating under an oxygen-poor environment and/or in situ electrochemical reduction, to partially reduce RuO 2 . The formed Ru/RuO 2 interfaces demonstrate superior HER activities (e.g. η 10 = 17 mV, 35 mV dec –1 in 1 M KOH) than Pt/C (e.g. η 10 = 27 mV, 58 mV dec –1 in 1 M KOH) at both small (10–100 mA cm –2 ) and large (1 A cm –2 ) current densities in alkaline solution and even real seawater. Comprehensive experiments were conducted to investigate the structure-HER performance relationships. Moreover, benefiting from the bifunctional character of RuO2, a two-electrode system based on Ru/RuO 2 composites and RuO 2 exhibits the lowest cell voltage for water splitting in both 1 M KOH and 0.5 M H 2 SO 4 , respectively. A 300 h-stability test at 10 mA cm –2 without an obvious decay demonstrates the industrial prospects of the Ru/RuO 2 composites to generate green energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ determination of lithium ion cathode/electrolyte thickness and composition as a function of charge

In this work we report the first experimental in situ determination of the thickness and estimated composition of a condensed electrode/electrolyte interface at various states of charge for the high voltage Li-ion cathode LiMn1.5Ni0.5O4 by exploiting the power of neutron reflectometry.1 Understanding the electrode/electrolyte interface is critical to developing an understanding of interfacial reactions needed to model transport phenomena and predict more stable electrolytes for electrochemical cells.2,3 However, developing the ability to control interfacial reactions in electrochemical cells is arguably one of the most critical challenges confronting researchers focused on energy storage and conversion reactions as well as liquid phase reactions such as photocatalysts and biomass conversion.2 For example, in electrochemical energy storage systems, such as batteries, the reactions between a solid electrode and a liquid electrolyte can lead to the formation of the solid electrolyte interphase (SEI), which directly mediates the stability, durability and safety of the cell. Controlling these interfacial reactions is essential to developing new, durable, and higher energy storage systems needed in the future.

Neutron Reflectometry↗

Interface and magnetic characterization of ultrathin EuO films with XMCD

We present work done on EuO films with thicknesses varying from 10 to 60 A grown as a stepped wedge on Si/Cr(20 {angstrom})/Cu(90 {angstrom}) and capped with Y(20 {angstrom})/Al(80 {angstrom}). The films were characterized by x-ray absorption spectroscopy (XAS) and x-ray magnetic circular dichroism (XMCD) at the europium M{sub 5} and copper L{sub 3} edges. The films high quality and consistent magnetic properties were confirmed by SQUID magnetometry, which revealed a constant saturation moment independent of film thickness. XAS at the Cu L{sub 3} edge showed that the bottom Cu electrode is metallic (oxidation free). We report an XMCD intensity of 52% ({+-}4.3), in close agreement with theoretical calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Remnant PbI{sub 2}, an unforeseen necessity in high-efficiency hybrid perovskite-based solar cells?

Perovskite-containing solar cells were fabricated in a two-step procedure in which PbI{sub 2} is deposited via spin-coating and subsequently converted to the CH{sub 3}NH{sub 3}PbI{sub 3} perovskite by dipping in a solution of CH{sub 3}NH{sub 3}I. By varying the dipping time from 5 s to 2 h, we observe that the device performance shows an unexpectedly remarkable trend. At dipping times below 15 min the current density and voltage of the device are enhanced from 10.1 mA/cm{sup 2} and 933 mV (5 s) to 15.1 mA/cm{sup 2} and 1036 mV (15 min). However, upon further conversion, the current density decreases to 9.7 mA/cm{sup 2} and 846 mV after 2 h. Based on X-ray diffraction data, we determined that remnant PbI{sub 2} is always present in these devices. Work function and dark current measurements showed that the remnant PbI{sub 2} has a beneficial effect and acts as a blocking layer between the TiO{sub 2} semiconductor and the perovskite itself reducing the probability of back electron transfer (charge recombination). Furthermore, we find that increased dipping time leads to an increase in the size of perovskite crystals at the perovskite-hole-transporting material interface. Overall, approximately 15 min dipping time (∼2% unconverted PbI{sub 2}) is necessary for achieving optimal device efficiency.

36 MATERIALS SCIENCE↗

Revealing Coexisting Cu0–Cu+ Sites in Cu3N Nanoensembles for Selective CC Coupling of CO2 Under Low Overpotential

To address a long-existing debate on what copper species are responsible for efficient CC coupling, especially ethanol formation, in electrochemical CO2 reduction reaction, herein, a comprehensive study using Cu3N nanocubes with a uniform size and shape, alongside a single crystalline phase is reported. The Cu3N nanoensemble electrode has a remarkable Faradaic efficiency (FE) of 64% for ethanol production at a relatively low potential of -0.6 V versus reversible hydrogen electrode. Through in-operando X-ray absorption spectroscopy study, a dynamic phase evolution that directly correlates with changes in FE across varying applied potentials is observed. Notably, the nanoensemble with a composition of ≈71% Cu+ and 29% Cu0 is identified as being selective for ethanol formation at the low overpotential. Conversely, a predominantly metallic Cu phase formed at potentials more negative than -0.6 V favors the hydrogen evolution reaction. Density functional theory calculations at the Cu3N-Cu interface substantiate that the coexistence of Cu0-Cu+ not only energetically favors the ethanol reaction pathway but also destabilizes the intermediates for ethylene pathway.

*CH-CHO as an intermediate for ethanol production↗

Cracking in polymer substrates for flexible electronic devices and its mitigation

Mechanical reliability plays a critical role in determining the durability of flexible electronic devices because of the significant mechanical stresses they experience during manufacturing and operation. Many such devices are built on sheets comprising stiff transparent-conducting oxide (TCO) electrode films on compliant polymer substrates, and it is generally assumed that the high-toughness polymer substrates do not crack. Contrary to this assumption, here we show extensive cracking in the polymer substrates during bending of a variety of TCO/polymer sheets, and a device example — flexible perovskite solar cells. Such substrate cracking, which compromises the overall mechanical integrity of the entire device, is driven by the amplified stress-intensity factor caused by the elastic mismatch at the film/substrate interface. To mitigate this substrate cracking, an interlayer-engineering approach is designed and experimentally demonstrated. This approach is potentially applicable to myriad flexible electronic devices, with stiff films on compliant substrates, for improving their durability and reliability.

42 ENGINEERING↗

Self-assembly of photo-reduced graphene-titania films.

In an aim to develop photo-responsive composites, the UV photo-reduction of aqueous titanium oxide nanoparticle-graphene oxide (TiO{sub 2}-GO) dispersions (Lambert et al. J Phys. Chem. 2010 113 (46), 19812-19823) was undertaken. Photo-reduction led to the formation of a black precipitate as well as a soluble portion, comprised of titanium oxide nanoparticle-reduced graphene oxide (TiO{sub 2}-RGO). When allowed to slowly evaporate, self assembled titanium oxide nanoparticle-graphene oxide (SA-TiO{sub 2}-RGO) films formed at the air-liquid interface of the solution. The thickness of SARGO-TiO{sub 2} films range from {approx}30-100 nm when deposited on substrates, and appear to be comprised of a mosaic assembly of graphene nanosheets and TiO{sub 2}, as observed by scanning electron microscopy. Raman spectroscopy and X-ray photoelectron spectroscopy indicate that the graphene oxide is only partially reduced in the SA-TiO{sub 2}-RGO material. These films were also deposited onto inter-digitated electrodes and their photo-responsive behavior was examined. UV-exposure lead to a {approx} 200 kOhm decrease in resistance across the device, resulting in a cathodically biased film. The cathodic bias of the films was utilized for the subsequent reduction of Ag(NO{sub 3}) into silver (Ag) nanoparticles, forming a ternary Ag-(SA-RGO-TiO{sub 2}) composite. Various aspects of the self assembled films, their photoconductive properties as well as potential applications will be presented.

36 MATERIALS SCIENCE↗

Modeling Electrodeposition in 3D Porous Architectures for Solid-State Li-Metal Batteries

Li-metal storage in three-dimensional (3D) electrodes is considered a potential dendrite-mitigation strategy. The large surface area and high porosity of these electrodes result in reduced local Li-plating current densities. The porous topology provides a scaffold for Li-deposition and stripping, maintaining both mechanical integrity and Li accessibility. The goal of this study is to understand how characteristics, such as geometry and material properties, affect the current distribution and deposition pattern. To this end, we developed a computational method to track material growth driven by electrodeposition within a complex geometry. This method ensures that the finite-element discretization remains conforming to the moving boundary while preserving an adequate mesh quality, and thus maintains solution accuracy. Using this new computational tool, we analyze the conditions under which porous anode architectures effectively expand the surface area of the charge-transfer interface, and self-regulate current density and dendrite growth.

3D electrode architectures↗

Soft- and reactive landing of ions onto surfaces: Concepts and applications: CONCEPTS AND APPLICATIONS

Soft- and reactive landing of mass-selected ions is gaining attention as a promising approach for the precisely-controlled preparation of materials on surfaces that are not amenable to deposition using conventional methods. A broad range of ionization sources and mass-filters are available that make ion soft-landing a versatile tool for surface modification using beams of hyperthermal (< 100 eV) ions. The ability to select the mass-to-charge ratio of the ion, its kinetic energy and charge state, along with precise control of the size, shape, and position of the ion beam on the deposition target distinguishes ion soft landing from other surface modification techniques. Soft- and reactive landing have been used to prepare interfaces for practical applications as well as precisely-defined model surfaces for fundamental investigations in chemistry, physics, and materials science. For instance, soft- and reactive landing have been applied to study the surface chemistry of ions isolated in the gas-phase, prepare arrays of proteins for high-throughput biological screening, produce novel carbon-based and polymer materials, enrich the secondary structure of peptides and the chirality of organic molecules, immobilize electrochemically-active proteins and organometallics on electrodes, create thin films of complex molecules, and immobilize catalytically active organometallics as well as ligated metal clusters. In addition, soft landing has enabled investigation of the size-dependent behavior of bare metal clusters in the critical subnanometer size regime where chemical and physical properties do not scale predictably with size. The morphology, aggregation, and immobilization of larger bare metal nanoparticles, which are directly relevant to the design of catalysts as well as improved memory and electronic devices, have also been studied using ion soft landing. This review article begins in section 1 with a brief introduction to the existing applications of ion soft- and reactive landing. Section 2 provides an overview of the ionization sources and mass filters that have been used to date for soft landing of mass-selected ions. A discussion of the competing processes that occur during ion deposition as well as the types of ions and surfaces that have been investigated follows in section 3. Section 4 discusses the physical phenomena that occur during and after ion soft landing including retention and reduction of ionic charge along with factors that impact the efficiency of ion deposition. The influence of soft landing on the secondary structure and biological activity of complex ions is addressed in section 5. Lastly, an overview of the structure and mobility as well as the catalytic, optical, magnetic, and redox properties of bare ionic clusters and nanoparticles deposited onto surfaces is presented in section 6.

Environmental Molecular Sciences Laboratory↗

Erratum to: Soft- and reactive landing of ions onto surfaces: concepts and applications

Soft- and reactive landing of mass-selected ions is gaining attention as a promising approach for the precisely-controlled preparation of materials on surfaces that are not amenable to deposition using conventional methods. A broad range of ionization sources and mass filters are available that make ion soft-landing a versatile tool for surface modification using beams of hyperthermal (<100?eV) ions. The ability to select the mass-to-charge ratio of the ion, its kinetic energy and charge state, along with precise control of the size, shape, and position of the ion beam on the deposition target distinguishes ion soft landing from other surface modification techniques. Soft- and reactive landing have been used to prepare interfaces for practical applications as well as precisely-defined model surfaces for fundamental investigations in chemistry, physics, and materials science. For instance, soft- and reactive landing have been applied to study the surface chemistry of ions isolated in the gas-phase, prepare arrays of proteins for high-throughput biological screening, produce novel carbon-based and polymer materials, enrich the secondary structure of peptides and the chirality of organic molecules, immobilize electrochemically-active proteins and organometallics on electrodes, create thin films of complex molecules, and immobilize catalytically active organometallics as well as ligated metal clusters. In addition, soft landing has enabled investigation of the size-dependent behavior of bare metal clusters in the critical subnanometer size regime where chemical and physical properties do not scale predictably with size. The morphology, aggregation, and immobilization of larger bare metal nanoparticles, which are directly relevant to the design of catalysts as well as improved memory and electronic devices, have also been studied using ion soft landing. This review article begins in section 1 with a brief introduction to the existing applications of ion soft- and reactive landing. Section 2 provides an overview of the ionization sources and mass filters that have been used to date for soft landing of mass-selected ions. A discussion of the competing processes that occur during ion deposition as well as the types of ions and surfaces that have been investigated follows in section 3. Section 4 discusses the physical phenomena that occur during and after ion soft landing, including retention and reduction of ionic charge along with factors that impact the efficiency of ion deposition. The influence of soft landing on the secondary structure and biological activity of complex ions is addressed in section 5. Lastly, an overview of the structure and mobility as well as the catalytic, optical, magnetic, and redox properties of bare ionic clusters and nanoparticles deposited onto surfaces is presented in section 6. © 2015 Wiley Periodicals, Inc. Mass Spec Rev 35:439–479, 2016.

Johnson, Grant E.↗

The Linkage Between Electro-Chemical Mechanical Instabilities in Battery Materials

Battery chemistry must be diversified to achieve a sustainable energy landscape by effectively utilizing renewable energy sources. Alkali metal-ion, all-solid-state, metal–air batteries, and multivalent batteries offer unique cost, safety, raw material abundance, energy, and power density solutions. However, realizing these “beyond Li-ion batteries” must uncover their working principles and performance & property relationships. In this aspect, mitigating chemo-mechanical instabilities in the structure and surface of the electrodes plays a crucial role in their performance. Unfortunately, the coupling between electrochemical and mechanical interactions is often poorly understood due to a lack of operando characterization. Here, this review article explains the working principles of curvature measurement and digital image correlation for measuring stress and strain generations in battery materials. We provided specific examples of how these operando mechanical measurements shed light on instabilities in alkali metal ion electrodes, solid electrolytes, Li-O 2 batteries, and aqueous Zn-ion batteries. Operando mechanical measurements offer an effective way to map changes in the physical fingerprint of the battery materials, therefore providing crucial information to elucidate instabilities in battery materials.

25 ENERGY STORAGE↗

Pyroelectric energy harvesting using liquid-based switchable thermal interfaces

The pyroelectric effect offers an intriguing solid-state approach for harvesting ambient thermal energy to power distributed networks of sensors and actuators that are remotely located or otherwise difficult to access. There have been, however, few device-level demonstrations due to challenges in converting spatial temperature gradients into temporal temperature oscillations necessary for pyroelectric energy harvesting. We demonstrate the feasibility of a device concept that uses liquid-based thermal interfaces for rapid switching of the thermal conductance between a pyroelectric material and a heat source/sink and can thereby deliver high output power density. Using a thin film of a pyroelectric co-polymer together with a macroscale mechanical actuator, we operate pyroelectric thermal energy harvesting cycles at frequencies close to 1 Hz. Film-level power densities as high as 110 mW/cm(3) were achieved, limited by slow heat diffusion across a glass substrate. When combined with a laterally interdigitated electrode array and a MEMS actuator, the present design offers an attractive option for compact high-power density thermal energy harvesters. (C) 2012 Elsevier B.V. All rights reserved.

Cha, G↗

Atomic intermixing in short-period InAs/GaSb superlattices

High-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and laser-assisted local-electrode atom-probe (LEAP) tomography are utilizing for characterizing short-period InAs/GaSb superlattices with an emphasis on obtaining the atomic concentration profiles with sub-nm resolution. HAADF-STEM permits direct visualization and counting of atomic columns in individual sub-layers. The spatial resolution of HAADF-STEM is sufficient to resolve the anion-cation dumbbells and, on this basis, to follow the atomic distributions across a superlattice. Both methods confirm that InAs-on-GaSb interfaces are wider than GaSb-on-InAs interfaces. The interfacial widths deduced from LEAP tomographic measurements are slightly larger than those extracted from HAADF-STEM micrographs, with the maximum total width not exceeding 4.5 monolayers. LEAP tomographic analysis shows the presence of about 7 at. % of Sb atoms in the middle of the InAs sub-layers, as a result of As/Sb substitutions during growth.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interfacial charge transfer and interaction in the MXene/TiO 2 heterostructures

Hybrid materials of MXenes [two-dimensional (2D) carbides and nitrides] and transition-metal oxides have shown great promise in electrical energy storage (EES) and 2D heterostructures have been proposed as the next-generation electrode materials to expand the limits of current technology. Here we use first principles density functional theory to investigate the interfacial structure, energetics, and electronic properties of the heterostructures of MXenes (Ti n+1 C n T 2 ; T = terminal groups) and anatase TiO 2 . We find that the greatest work-function differences are between OH-terminated MXene (1.6 eV) and anatase TiO 2 (101) (6.4 eV), resulting in the largest interfacial electron transfer (~0.9e/nm 2 across the interface) from MXene to the TiO 2 layer. This interface also has the strongest adhesion and is further strengthened by hydrogen bond formation. For O–, F–, or mixed O–/F– terminated Ti n+1 C n MXenes, electron transfer is minimal and interfacial adhesion is weak for their heterostructures with TiO 2 . The strong dependence of the interfacial properties of the MXene/TiO 2 heterostructures on the surface chemistry of the MXenes will be useful to tune the heterostructures for EES applications.

2-dimensinal systems↗