Search NASA⌕ Search

SEARCH · Search NASA

Results for “experimental methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Life prediction of thermal-mechanical fatigue using strain-range partitioning

The applicability is described of the method of Strainrange Partitioning to the life prediction of thermal-mechanical strain-cycling fatigue. An in-phase test on 316 stainless steel is analyzed as an illustrative example. The observed life is in excellent agreement with the life predicted by the method using the recently proposed Step-Stress Method of experimental partitioning, the Interation Damage Rule, and the life relationships determined at an isothermal temperature of 705 C. Implications of the study are discussed relative to the general thermal fatigue problem.

Halford, G. R.↗

Wind Tunnel Design Studies and Technical Evaluation of Advanced Cargo Aircraft Concepts

In support of aerodynamic studies relating to the design and performance prediction of the National Transonic Facility, the following main tasks were accomplished: (1) estimation of aerodynamic losses of the tunnel circuits, (2) refinement of the high-speed diffuser loss prediction method utilizing experimental data generated for the purpose; (3) model studies of flow in the second-turn and measurements of the fan inlet distortion and overall pressure loss; (4) development of a shortened fan nacelle configuration of improved aerodynamic performance; and (5) evolution through model studies of an efficient rapid-diffuser system as the key to a circuit-modification proposal to reduce volume and minimize liquid-nitrogen consumption, at the same time saving on the shell cost.

Rao, D. M.↗

Numerical method to calculate the induced drag or optimum loading for arbitrary non-planar aircraft

A simple unified numerical method applicable to non-planar subsonic aircraft has been developed for calculating either the induced drag for an arbitrary loading or the optimum aircraft loading which results in minimum induced drag. The method utilizes a vortex lattice representation of the aircraft lifting surfaces coupled with the classic equations and theorems for computing and minimizing induced drag. Correlation of results from the numerical method with non-planar solutions obtained from other more complex theories indicates very good agreement. Comparison of the induced-drag computations using the numerical method with experimental data for planar and non-planar configurations was also very good.

Blackwell, J. A., Jr.↗

Life prediction of thermal-mechanical fatigue using strainrange partitioning

This paper describes the applicability of the method of Strainrange Partitioning to the life prediction of thermal-mechanical strain-cycling fatigue. An in-phase test on 316 stainless steel is analyzed as an illustrative example. The observed life is in excellent agreement with the life predicted by the method using the recently proposed Step-Stress Method of experimental partitioning, the Interaction Damage Rule, and the life relationships determined at an isothermal temperature of 705 C. Implications of the present study are discussed relative to the general thermal fatigue problem.

Halford, G. R.↗

Measuring acoustic properties of materials and jet nozzles

Method measures acoustic properties of sound-absorbent materials and jet-nozzle system. Advantages of impulse method over other methods are that test time and complication are reduced. Results obtained from impulse method have been compared with those from existing methods, both experimental and theoretical, and show excellent agreement.

Dean, P. D.↗

A study of multiple-shaker modal survey testing

The principal objective was to examine and to assess the practical value of a method of multiple-shaker sinusoidal modal vibration testing known as Asher's method. Numerical studies which simulate the application of Asher's method and a unique experimental implementation of the method were completed. Another objective of the research was to develop and to demonstrate with numerical simulation a quantitative method for determining from transfer function data the number of dominant modes of vibration in sinusoidal structural response.

Hallauer, W. L., Jr.↗

An impulse test technique with application to acoustic measurements

A method has been presented for measuring the acoustic properties of an absorbent material and a duct/nozzle system (with or without airflow) using a high voltage spark discharge as an impulse source of sound. The cross-spectra of the incident, reflected and transmitted acoustic pressure transients are analyzed by way of a FFT digital processor in the form of complex transfer functions. These transfer functions have a direct relationship to the termination impedance and radiation directivity. The impulse method has been justified by comparisons, with data obtained from existing methods (both experimental and theoretical), that show excellent agreement. Reflection coefficients and radiation impedances of various duct-nozzle systems and their associated far-field directivities are also presented as some of the applications of the impulse technique.

Salikuddin, M.↗

USSAERO computer program development, versions B and C

Versions B and C of the unified subsonic and supersonic aerodynamic analysis program, USSAERO, are described. Version B incorporates a new symmetrical singularity method to provide improved surface pressure distributions on wings in subsonic flow. Version C extends the range of application of the program to include the analysis of multiple engine nacelles or finned external stores. In addition, nonlinear compressibility effects in high subsonic and supersonic flows are approximated using a correction based on the local Mach number at panel control points. Several examples are presented comparing the results of these programs with other panel methods and experimental data.

Woodward, F. A.↗

Multivariable closed loop control analysis and synthesis for complex flight systems

A flight control system analysis and synthesis method is presented that is intended to be especially suitable for application to vehicles exhibiting complex dynamic characteristics. For such vehicles quantitative handling qualities specifications are not usually available. Howver, handling qualities objectives are specifically introduced in this method via the hypothesis of correlation between pilot ratings and the objective function of an optimal control model of the human pilot. Further, since augmentation and pilot operate in parallel, simultaneous determination of the augmentation and pilot model gains is required. Desirable augmented dynamics are obtained for a variety of complex systems and the method is experimentally verified in the case of simple pilot damper gain selection for optimum pitch tracking performance.

Schmidt, D. K.↗

NASA research related to sailplane airfoils

The theoretical methods and experimental facilities at the NASA Langley Research Center have been employed to conduct investigations of sailplane airfoils. The unique and powerful capabilities of the Eppler Program have been used to design and analyze many airfoils and to smooth several Wortmann airfoils. Wind-tunnel investigations of two sailplane airfoils have been conducted in the Langley low-turbulence pressure tunnel. A procedure for sailplane performance improvement has been outlined.

Somers, D. M.↗

Identification and management of filament-wound case stiffness parameters

The high specific strength and the high specific modules made graphite epoxy laminate an expedient material substitute for the Shuttle Solid Rocket Motor steel case to substantially increase the payload performance without increasing the composite case axial growth during thrust build up which was constrained to minimize liftoff excitation effects on existing structural elements and interfaces. Parameters associated with axial growth were identified for quality and manufacturing controls. Included is an innovative method for experimentally verifying extensional elastic properties on a laminate pressurized test bottle.

Verderaime, V.↗

Implicit upwind methods for the compressible Navier-Stokes equations

A class of implicit upwind differencing methods for the compressible Navier-Stokes equations is described and applied. The methods are based on the use of local eigenvalues or wave speeds to control spatial differencing of inviscid terms and are aimed at increasing the level of accuracy and stability achievable in computation. Techniques for accelerating the rate of convergence to a steady state solution are also used. Applications to inviscid and viscous transonic flows are discussed and compared with other methods and experimental measurements. It is shown that accurate and efficient transonic airfoil calculations can be made on the Cray-l computer in less than 2 min.

Coakley, T. J.↗

A fundamental approach to the sticking of insect residues to aircraft wings

The sticking of insect residues to aircraft wings is investigated. The major topics of this review are: Experimentally tested methods, testing techniques, the effect of surface roughness height on aerodynamic drag, materials tested and, the adhesive properties of insect body fluids are reviewed.

Eiss, N. S., Jr.↗

Implicit upwind methods for the compressible Navier-Stokes equations

A class of implicit upwind-differencing methods for the compressible Navier-Stokes equations is described and applied. The methods are based on the use of local eigenvalues or wave speeds to control spatial differencing of inviscid terms and are aimed at increasing the level of accuracy and stability achievable in computation. Techniques for accelerating the rate of convergence to a steady-state solution are also used. Applications to inviscid and viscous transonic flows are discussed and compared with other methods and experimental measurements. It is shown that accurate and efficient transonic airfoil calculations can be made on the Cray-1 coomputer in less than 2 min.

Coakley, T. J.↗

A TWT amplifier with a linear power transfer characteristic and improved efficiency

A novel method called "Dynamic Velocity Taper' to linearize the Pout versus Pin transfer characteristic that does not require any extraneous circuitry or tuning, has large bandwidth capabilities ( 10 percent) and offers also an increase in the intrinsic traveling wave tube (TWT) efficiency by 1 to 2 dB is described. In addition, the method permits the TWT to be operated at or near the synchronous voltage (b plus or minus o) which produces a flat small and large signal gain responses and low AM to PM conversion. The physics of the method and experimental verification are given. The implementation should have a significant impact on TWT performance and increase the channel capacity of communication satellites.

Kosmahl, H. G.↗

A TWT amplifier with a linear power transfer characteristic and improved efficiency

A novel method called 'Dynamic Velocity Taper' to linearize the Pout versus Pin transfer characteristic that does not require any extraneous circuitry or tuning, has large bandwidth capabilities (10 percent) and offers also an increase in the intrinsic traveling wave tube (TWT) efficiency by 1 to 2 dB is described. In addition, the method permits the TWT to be operated at or near the synchronous voltage (b plus or minus o) which produces a flat small and large signal gain responses and low AM to PM conversion. The physics of the method and experimental verification are given. The implementation should have a significant impact on TWT performance and increase the channel capacity of communication satellites. Previously announced in STAR as N84-21803

Kosmahl, H. G.↗

Recharging Batteries Chemically

Iron/air batteries recharged chemically by solution of strong base in alcohol or by basic alcohol solution of reducing agent. Although method still experimental, it has potential for batteries in electric automobiles or as energy system in remote applications. Also used in quiet operations where noise or infrared signature of diesel engine is not desired.

Williams, R. M.↗

Deformations and strains in adhesive joints by moire interferometry

Displacement fields in a thick adherend lap joint and a cracked lap shear specimen were measured by high sensitivity moire interferometry. Contour maps of in-plane U and V displacements were obtained across adhesive and adherent surfaces. Loading sequences ranged from modest loads to near-failure loads. Quantitative results are given for displacements and certain strains in the adhesive and along the adhesive/adherend boundary lines. The results show nonlinear displacements and strains as a function of loads or stresses and they show viscoelastic or time-dependent response. Moire interferometry is an excellent method for experimental studies of adhesive joint performance. Subwavelength displacement resolution of a few micro-inches, and spatial resolution corresponding to 1600 fringes/inch (64 fringes/mm), were obtained in these studies. The whole-field contour maps offer insights not available from local measurements made by high sensitivity gages.

Post, D.↗