Search NASA⌕ Search

SEARCH · Search NASA

Results for “failure simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Concurrent Androgen Deprivation Therapy During Salvage Prostate Radiotherapy Improves Treatment Outcomes in High-Risk Patients

Purpose: To determine whether concurrent androgen deprivation therapy (ADT) during salvage radiotherapy (RT) improves prostate cancer treatment outcomes. Methods and Materials: A total of 630 postprostatectomy patients were retrospectively identified who were treated with three-dimensional conformal RT. Of these, 441 were found to be treated for salvage indications. Biochemical failure was defined as prostate-specific antigen (PSA) of 0.2 ng/mL or greater above nadir with another PSA increase or the initiation of salvage ADT. Progression-free survival (PFS) was defined as the absence of biochemical failure, continued PSA rise despite salvage therapy, initiation of systemic therapy, clinical progression, or distant failure. Multivariate-adjusted Cox proportional hazards modeling was performed to determine which factors predict PFS. Results: Low-, intermediate-, and high-risk patients made up 10%, 24%, and 66% of patients, respectively. The mean RT dose was 68 Gy. Twenty-four percent of patients received concurrent ADT (cADT). Regional pelvic nodes were treated in 16% of patients. With a median follow-up of 3 years, the 3-year PFS was 4.0 years for cADT vs. 3.4 years for cADT patients (p = 0.22). Multivariate analysis showed that concurrent ADT (p = 0.05), Gleason score (p < 0.001), and pre-RT PSA (p = 0.03) were independent predictors of PFS. When patients were stratified by risk group, the benefits of cADT (hazard ratio, 0.65; p = 0.046) were significant only for high-risk patients. Conclusions: This retrospective study showed a PFS benefit of concurrent ADT during salvage prostate RT. This benefit was observed only in high-risk patients.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Metal plasticity and ductile fracture modeling for cast aluminum alloy parts

Here in this study, plasticity and ductile fracture properties were characterized by performing various tension, shear, and compression tests. A series of 10 experiments were performed using notched round bars, flat-grooved plates, in-plane shear plates, and cylindrical bars. Two cast aluminum alloys used in automotive suspension systems were selected. Plasticity modelling was performed and the results were compared with experimental and corresponding simulation results; further, the relationships among the stress triaxiality, Lode angle parameter, and equivalent plastic strain at the onset of failure were determined to calibrate a ductile fracture model. Finally, the proposed ductile fracture model shows good agreement with experimental results.

36 MATERIALS SCIENCE↗

Stress accommodation in nanoscale dolan bridges designed for superconducting qubits

Josephson junctions are the principal circuit element in numerous superconducting quantum information devices and can be readily integrated into large-scale electronics. However, device integration at the wafer scale necessarily depends on having a reliable, high-fidelity, and high-yield fabrication method for creating Josephson junctions. When creating Al/AlO x based superconducting qubits, the standard Josephson junction fabrication method relies on a sub-micron suspended resist bridge, known as a Dolan bridge, which tends to be particularly fragile and can often times fracture during the resist development process, ultimately resulting in device failure. In this work, we demonstrate a unique Josephson junction lithography mask design that incorporates stress-relief channels. Our simulation results show that the addition of stress-relief channels reduces the lateral stress in the Dolan bridge by more than 70% for all the bridge geometries investigated. In practice, our novel mask design significantly increased the survivability of the bridge during device processing, resulting in 100% yield for over 100 Josephson junctions fabricated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Automatic Time Step Control to Resolve Hydromechanically Driven Fault Reactivation, Spontaneous Nucleation, and Seismic Arrest

Abstract A physical understanding of the progression from flow‐driven (quasi‐static) poromechanical deformation to dynamic fault rupture is critical to the resilient operations of several engineering systems. These processes are bridged by a progression from fault reactivation to the spontaneous nucleation of unstable sliding. Toward addressing this challenge, novel automatic time step size control methods are developed to enable accurate and efficient simulation of these dynamics and transitions from the first principles. The controllers combine local models for discretization error and Coulomb failure conditions to automatically adjust the time step size across several orders of magnitude. The methods do not require additional empirical or theoretical input and can resolve the pre‐rupture, interseismic, and seismic periods to the allowed accuracy. The computational results reveal that the proposed methods automatically capture the onset of reactivation and nucleation for homogeneous and heterogeneous fields. Hydrodynamic and structural heterogeneity lead to disparate critical nucleation sizes compared to those predicted by theory. The results highlight its potential in predicting induced seismicity in realistic subsurface engineering systems and at practical scales.

Environmental Sciences & Ecology↗

Chapter 4: Drivetrain Analysis for Reliable Design

This chapter described common design practices for the wind-turbine gearboxes and main bearings, along with modelling and simulation techniques employed to support and evaluate the development process. These design criteria and requirements are based on several major failure modes for gears and bearings. However, not all of the failure modes are understood well enough to be included in the design standards primarily because of the complexity of the modelling and loading conditions. Drivetrain modelling for design was discussed, and most of the modelling tools used in design are static in nature.

17 WIND ENERGY↗

FAILED-DETONATION SUPERNOVAE: SUBLUMINOUS LOW-VELOCITY Ia SUPERNOVAE AND THEIR KICKED REMNANT WHITE DWARFS WITH IRON-RICH CORES

Type Ia supernovae (SNe Ia) originate from the thermonuclear explosions of carbon-oxygen (C-O) white dwarfs (WDs). The single-degenerate scenario is a well-explored model of SNe Ia where unstable thermonuclear burning initiates in an accreting, Chandrasekhar-mass WD and forms an advancing flame. By several proposed physical processes, the rising, burning material triggers a detonation, which subsequently consumes and unbinds the WD. However, if a detonation is not triggered and the deflagration is too weak to unbind the star, a completely different scenario unfolds. We explore the failure of the gravitationally confined detonation mechanism of SNe Ia, and demonstrate through two-dimensional and three-dimensional simulations the properties of failed-detonation SNe. We show that failed-detonation SNe expel a few 0.1 M{sub Sun} of burned and partially burned material and that a fraction of the material falls back onto the WD, polluting the remnant WD with intermediate-mass and iron-group elements that likely segregate to the core forming a WD whose core is iron rich. The remaining material is asymmetrically ejected at velocities comparable to the escape velocity from the WD, and in response, the WD is kicked to velocities of a few hundred km s{sup -1}. These kicks may unbind the binary and eject a runaway/hypervelocity WD. Although the energy and ejected mass of the failed-detonation SN are a fraction of typical thermonuclear SNe, they are likely to appear as subluminous low-velocity SNe Ia. Such failed detonations might therefore explain or are related to the observed branch of peculiar SNe Ia, such as the family of low-velocity subluminous SNe (SN 2002cx/SN 2008ha-like SNe).

79 ASTRONOMY AND ASTROPHYSICS↗

Integrated Reflection Seismic Monitoring and Reservoir Modeling for Geologic CO 2 Sequestration

The US DOE/NETL CCS MVA program funded a project with Fusion Petroleum Technologies Inc. (now SIGMA) to model the proof of concept of using sparse seismic data in the monitoring of CO 2 injected into saline aquifers. The goal of the project was to develop and demonstrate an active source reflection seismic imaging strategy based on deployment of spatially sparse surface seismic arrays. The primary objective was to test the feasibility of sparse seismic array systems to monitor the CO 2 plume migration injected into deep saline aquifers. The USDOE/RMOTC Teapot Dome (Wyoming) 3D seismic and reservoir data targeting the Crow Mountain formation was used as a realistic proxy to evaluate the feasibility of the proposed methodology. Though the RMOTC field has been well studied, the Crow Mountain as a saline aquifer has not been studied previously as a CO 2 sequestration (storage) candidate reservoir. A full reprocessing of the seismic data from field tapes that included prestack time migration (PSTM) followed by prestack depth migration (PSDM) was performed. A baseline reservoir model was generated from the new imaging results that characterized the faults and horizon surfaces of the Crow Mountain reservoir. The 3D interpretation was integrated with the petrophysical data from available wells and incorporated into a geocellular model. The reservoir structure used in the geocellular model was developed using advanced inversion technologies including Fusion's ThinMAN™ broadband spectral inversion. Seal failure risk was assessed using Fusion's proprietary GEOPRESS™ pore pressure and fracture pressure prediction technology. CO 2 injection was simulated into the Crow Mountain with a commercial reservoir simulator. Approximately 1.2MM tons of CO 2 was simulated to be injected into the Crow Mountain reservoir over 30 years and subsequently let 'soak' in the reservoir for 970 years. The relatively small plume developed from this injection was observed migrating due to gravity to the apexes of the double anticline in the Crow Mountain reservoir of the Teapot dome. Four models were generated from the reservoir simulation task of the project which included three saturation models representing snapshots at different times during and after simulated CO 2 injection and a fully saturated CO 2 fluid substitution model. The saturation models were used along with a Gassmann fluid substitution model for CO 2 to perform fluid volumetric substitution in the Crow Mountain formation. The fluid substitution resulted in a velocity and density model for the 3D volume at each saturation condition that was used to generate a synthetic seismic survey. FPTI's (Fusion Petroleum Technologies Inc.) proprietary SeisModelPRO™ full acoustic wave equation software was used to simulate acquisition of a 3D seismic survey on the four models over a subset of the field area. The simulated acquisition area included the injection wells and the majority of the simulated plume area.

02 PETROLEUM↗

A Model-Based Case for Redundant Computation

Despite its seemingly nonsensical cost, we show through modeling and simulation that redundant computation merits full consideration as a resilience strategy for next-generation systems. Without revolutionary breakthroughs in failure rates, part counts, or stable-storage bandwidths, it has been shown that the utility of Exascale systems will be crushed by the overheads of traditional checkpoint/restart mechanisms. Alternate resilience strategies must be considered, and redundancy is a proven unrivaled approach in many domains. We develop a distribution-independent model for job interrupts on systems of arbitrary redundancy, adapt Daly’s model for total application runtime, and find that his estimate for optimal checkpoint interval remains valid for redundant systems. We then identify conditions where redundancy is more cost effective than non-redundancy. These are done in the context of the number one supercomputers of the last decade, showing that thorough consideration of redundant computation is timely - if not overdue.

97 MATHEMATICS AND COMPUTING↗

Data request for Majiata DCL plant site characterization for geological sequestration - explanation of purpose and need

Detailed and accurate geological assessment of the proposed CO2 pilot injection and commercial project associated with Shenhua’s DCL plant is central to project success and US-China collaboration. The best result requires access to multiple data types and in the highest abundance available for the site and region. Insufficient data access will result in inaccurate simulations, poor drilling recommendations, high uncertainty in understanding new data from the site, and would increase the chance of technical failure or poor outcome. Examples from prior successful project discussed here are provided to demonstrate the need for full access to individual data types, access to multiple data types, and ability to correlate and integrate between these data sets.

58 GEOSCIENCES↗

Life prediction of turbine components: On-going studies at the NASA Lewis Research Center

An overview is presented of the many studies at NASA-Lewis that form the turbine component life prediction program. This program has three phases: (1) development of life prediction methods for major failure modes through materials studies, (2) evaluation and improvement of these methods through a variety of burner rig studies on simulated components in research engines and advanced rigs. These three phases form a cooperative, interdisciplinary program. A bibliography of Lewis publications on fatigue, oxidation and coatings, and turbine engine alloys is included.

Spera, D. A.↗

Analysis of the Space Shuttle Orbiter skin panels under simulated hydrodynamic loads

The Space Shuttle orbiter skin panels were analyzed under pressure loads simulating hydrodynamic loads to determine their capability to sustain a potential ditching and to determine pressures that typically would produce failures. Two Dynamic Crash Analysis of Structures (DYCAST) finite element models were used. One model was used to represent skin panels (bays) in the center body, while a second model was used to analyze a fuselage bay in the wing region of the orbiter. From an assessment of the DYCAST nonlinear computer results, it is concluded that the probability is extremely high that most, if not all, of the lower skin panels would rupture under ditching conditions. Extremely high pressure loads which are produced under hydrodynamic planning conditions far exceed the very low predicted failure pressures for the skin panels. Consequently, a ditching of the orbiter is not considered to have a high probability of success and should not be considered a means of emergency landing unless no other option exists.

Carden, Huey D.↗

Advances in turbulent transport modeling based on direct simulations of turbulence

Recent work using numerical simulations to study the modeling of scalar transport is outlined. A model developed by reference to simulations for homogeneous shear flow is presented. This model predicts cross-gradient transports that can give rise to the illusion of counter-gradient transport. The model is found to work remarkably well when compared to simulations for channel flow, but fails to predict important features of the scalar fluxes in mixing layers. Reasons for this failure are discussed and suggestions are made for future work.

Reynolds, W. C.↗

CONFIG - Adapting qualitative modeling and discrete event simulation for design of fault management systems

CONFIG is a modeling and simulation tool prototype for analyzing the normal and faulty qualitative behaviors of engineered systems. Qualitative modeling and discrete-event simulation have been adapted and integrated, to support early development, during system design, of software and procedures for management of failures, especially in diagnostic expert systems. Qualitative component models are defined in terms of normal and faulty modes and processes, which are defined by invocation statements and effect statements with time delays. System models are constructed graphically by using instances of components and relations from object-oriented hierarchical model libraries. Extension and reuse of CONFIG models and analysis capabilities in hybrid rule- and model-based expert fault-management support systems are discussed.

Malin, Jane T.↗

Summary: Experimental validation of real-time fault-tolerant systems

Testing and validation of real-time systems is always difficult to perform since neither the error generation process nor the fault propagation problem is easy to comprehend. There is no better substitute to results based on actual measurements and experimentation. Such results are essential for developing a rational basis for evaluation and validation of real-time systems. However, with physical experimentation, controllability and observability are limited to external instrumentation that can be hooked-up to the system under test. And this process is quite a difficult, if not impossible, task for a complex system. Also, to set up such experiments for measurements, physical hardware must exist. On the other hand, a simulation approach allows flexibility that is unequaled by any other existing method for system evaluation. A simulation methodology for system evaluation was successfully developed and implemented and the environment was demonstrated using existing real-time avionic systems. The research was oriented toward evaluating the impact of permanent and transient faults in aircraft control computers. Results were obtained for the Bendix BDX 930 system and Hamilton Standard EEC131 jet engine controller. The studies showed that simulated fault injection is valuable, in the design stage, to evaluate the susceptibility of computing sytems to different types of failures.

Iyer, R. K.↗

Hyper-X Stage Separation: Simulation Development and Results

This paper provides an overview of stage separation simulation development and results for NASA's Hyper-X program; a focused hypersonic technology effort designed to move hypersonic, airbreathing vehicle technology from the laboratory environment to the flight environment. This paper presents an account of the development of the current 14 degree of freedom stage separation simulation tool (SepSim) and results from use of the tool in a Monte Carlo analysis to evaluate the risk of failure for the separation event. Results from use of the tool show that there is only a very small risk of failure in the separation event.

Reubush, David E.↗

NEXT Ion Optics Simulation via ffx

Simulations of the erosion processes for two proposed sets of ion thruster grids for the NEXT project are presented. Structural failure and electron backstreaming due to accelerator grid erosion are discussed as two possible failure mechanisms of these grid sets. The TAG grid set was seen to outperform the NSTAR grid set both in terms of margin against electron backstreaming and accelerator grid mass loss for a variety of operating points. An investigation into the possibility of reducing the accelerator grid voltage magnitude for the TAG grid set showed improved propellant throughput capability.

Soulas, George↗

Design/Analysis of the JWST ISIM Bonded Joints for Survivability at Cryogenic Temperatures

A major design and analysis challenge for the JWST ISIM structure is thermal survivability of metal/composite bonded joints below the cryogenic temperature of 30K (-405 F). Current bonded joint concepts include internal invar plug fittings, external saddle titanium/invar fittings and composite gusset/clip joints all bonded to M55J/954-6 and T300/954-6 hybrid composite tubes (75mm square). Analytical experience and design work done on metal/composite bonded joints at temperatures below that of liquid nitrogen are limited and important analysis tools, material properties, and failure criteria for composites at cryogenic temperatures are sparse in the literature. Increasing this challenge is the difficulty in testing for these required tools and properties at cryogenic temperatures. To gain confidence in analyzing and designing the ISIM joints, a comprehensive joint development test program has been planned and is currently running. The test program is designed to produce required analytical tools and develop a composite failure criterion for bonded joint strengths at cryogenic temperatures. Finite element analysis is used to design simple test coupons that simulate anticipated stress states in the flight joints; subsequently the test results are used to correlate the analysis technique for the final design of the bonded joints. In this work, we present an overview of the analysis and test methodology, current results, and working joint designs based on developed techniques and properties.

Bartoszyk, Andrew↗

An Overview of the State of the Art in Atomistic and Multiscale Simulation of Fracture

The emerging field of nanomechanics is providing a new focus in the study of the mechanics of materials, particularly in simulating fundamental atomic mechanisms involved in the initiation and evolution of damage. Simulating fundamental material processes using first principles in physics strongly motivates the formulation of computational multiscale methods to link macroscopic failure to the underlying atomic processes from which all material behavior originates. This report gives an overview of the state of the art in applying concurrent and sequential multiscale methods to analyze damage and failure mechanisms across length scales.

Saether, Erik↗