Search NASA⌕ Search

SEARCH · Search NASA

Results for “fast reactors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

SCALE Modeling of the Fast Spectrum Heat Pipe Reactor

As part of the severe accident analysis collaboration with Sandia National Laboratories (SNL) and the Nuclear Regulatory Commission (NRC), SCALE models were developed for a fast-spectrum heat pipe reactor. These models were based on the Idaho National Laboratory (INL) Design A concept, which is an alternative design to the Los Alamos National Laboratory (LANL) Special Purpose Reactor (SPR), also known as the Megapower reactor. The model contains 1,134 heat pipes, surrounded by hexagonal fuel elements, with a potassium working fluid; the fuel is UO 2 with 19.75 wt% 235 U enrichment. The model contains axial beryllium oxide (BeO) reflectors above and below the active fuel region along with a radial alumina reflector containing 12 B 4 C control drums. The center of the core is left unfueled to make room for two shutdown control rods, one annular and one solid. The active region of the core was discretized into twenty axial and five radial zones to analyze spatial variations in power and burnup. Infinite lattice unit cell sensitivity studies were used to perform verification between the SCALE and INL models. The eigenvalue results agreed well with the reported results to within roughly 50 percent mille (pcm). Full-core model verification was performed by analyzing system eigenvalues with differing configurations of control drum and shutdown rod positions. These full core results all had eigenvalue differences less than 310 pcm. Control drum and shutdown rod worths were also compared, with differences of 3.2% or less. Using the verified model, the isotopic inventory and decay heat, as well as temperature feedback coefficients, were calculated and provided to SNL as input to the MELCOR severe accident code to analyze potential releases from this class of reactor. The results of the MELCOR analysis are provided in a different report.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Fuel Cycle Performance of Fast Spectrum Molten Salt Reactor Designs

In the search for new ways to generate low-carbon, reliable base-load power, a resurgence of interest in advanced nuclear energy technologies, including Molten Salt Reactors (MSRs), has produced multiple new conceptual MSRs including fast neutron spectrum designs. The fuel cycle performance of four historical fast MSR designs is analyzed using a recently developed SCALE/TRITON 6.2.4 Alpha with a continuous online reprocessing functionality. The fast spectrum and continuous feed and removal of material enable these concepts to have remarkable fuel cycle metrics: (1) resource utilization is approximately 18 times better than for a typical low-enriched thermal spectrum once-through fuel cycle (i.e., from approximately 180 t/GWe-year to 1 t/GWe-year); (2) fast MSRs generate approximately 25 times less nuclear waste than the current once-through fuel cycle. These metrics are consistent with the Evaluation and Screening Study, which produced a technology-agnostic quantification of the characteristic performance of alternate fuel cycles. Additionally, full-core and unit cell transport models were created and compared to verify the viability of using simplified unit cell geometries for long-term depletion simulation. The unit cell approximation provided a speedup of 20 times relative to the full-core simulation, with depleted mass relative error for major isotopes of less than 2%. Additional fast MSRs design and analysis challenges associated with different fuel cycles and the use of MSR technology are addressed and discussed.

Rykhlevskii, Andrei↗

NEAMS Experimental Support for Code Validation, INL FY2009

The goal is for all modeling and simulation tools to be demonstrated accurate and reliable through a formal Verification and Validation (V&V) process, especially where such tools are to be used to establish safety margins and support regulatory compliance, or to design a system in a manner that reduces the role of expensive mockups and prototypes. Whereas the Verification part of the process does not rely on experiment, the Validation part, on the contrary, necessitates as many relevant and precise experimental data as possible to make sure the models reproduce reality as closely as possible. Hence, this report presents a limited selection of experimental data that could be used to validate the codes devoted mainly to Fast Neutron Reactor calculations in the US. Emphasis has been put on existing data for thermal-hydraulics, fuel and reactor physics. The principles of a new “smart” experiment that could be used to improve our knowledge of neutron cross-sections are presented as well. In short, it consists in irradiating a few milligrams of actinides and analyzing the results with Accelerator Mass Spectroscopy to infer the neutron cross-sections. Finally, the wealth of experimental data relevant to Fast Neutron Reactors in the US should not be taken for granted and efforts should be put on saving these 30-40 years old data and on making sure they are validation-worthy, i.e. that the experimental conditions and uncertainties are well documented.

97 MATHEMATICS AND COMPUTING↗

Qualification of JEFF3.1.1 library for high conversion reactor calculations using the ERASME/R experiment

With its low CO{sub 2} production, Nuclear Energy appears to be an efficient solution to the global warming due to green-house effect. However, current LWR reactors are poor uranium users and, pending the development of Fast Neutron Reactors, alternative concepts of PWR with higher conversion ratio (HCPWR) are being studied again at CEA, first studies dating from the middle 80's. In these French designs, low moderation ratio has been performed by tightening the lattice pitch, achieving a conversion ratio of 0.8-0.9 with a MOX fuel coming from PWR UOX recycling. Theses HCPWRs are characterized by a harder neutron spectrum and the calculation uncertainties on the fundamental neutronics parameters are increased by a factor 3 regarding a standard PWR lattice, due to the major contribution of the Plutonium isotopes and of the epithermal energy range to the reaction rates. In order to reduce these uncertainties, a 3-year experimental validation program called ERASME has been performed by CEA from 1984 to 1986 in the EOLE reactor. Monte Carlo analysis of the ERASME/R experiments with the Monte Carlo code TRIPOLI4 allowed the qualification of the recommended JEFF.3.1.1 library for major neutronics parameters. K{sub eff} of the MOX under-moderated lattice is over-predicted by 440 {+-} 830 pcm (2{sigma}); the conversion ratio, indicator of the good use of uranium, is also slightly over-predicted: 2 % {+-} 4 % (2{sigma}) and the same for B4C absorber rods worth and soluble boron worth, over-predicted by 2 %, both in the 2 standard deviations range. The radial fission maps of heterogeneities (water-holes, B4C and fertile rods) are well reproduced: maximal (C-E)/E dispersion is 1.3 %, maximal power peak error is 2.7 %. The void reactivity worth is the only parameter poorly calculated with an overprediction of +12.4% {+-} 1.5%. ERASME/R analysis of MOX reactivity, void effect and spectral indexes will contribute to the reevaluation of {sup 241}Am and Plutonium isotopes nuclear data for the next library JEFF3.2. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A critical analysis of U-Pu-Zr phase transitions using calorimetric, microstructural, and phase equilibria data

Metallic fuels consisting primarily of uranium, plutonium, and zirconium (U-Pu-Zr) are a leading material candidate for fast-spectrum nuclear reactors. Early demonstration programs proved the principle of safe and efficient fast reactor operation, however there is still considerable uncertainty regarding the phase equilibria and microstructural evolution across the ternary composition space. Quantitative phase formation and identification measurements are scarce and often incomplete, with studies reporting either phase transition temperatures or phase identification data, but not both from the same specimens. In this study, we critically compared experimental and calculated phase transition data and correlated with the microstructure and phase characterization data of as-cast and annealed U-Pu-Zr alloys. Differential scanning calorimetry (DSC) was used to measure phase transitions in the subsolidus regions (723−948 K) of three ternary U-Pu-Zr alloys with similar plutonium concentrations but various U/Zr ratios. Due to sluggish kinetics and narrow ranges of phase stability, complex peaks required the use of a Frazier-Suzuki peak fitting algorithm to deconvolute and calculate transition peak temperatures and enthalpies. We also identified trends of phase transition behavior by critically comparing our DSC data with previous phase transition measurements as well as historical and calculated phase equilibrium diagrams. In conclusion, this provides a critical approach for benchmarking and assessing the quality of new U-Pu-Zr phase equilibria data prior to its incorporation into nuclear material databases.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

SEFOR Core I-E

This repository contains the VTB model developed for the Southwest Experimental Fast Oxide Reactor (SEFOR) core configuration I-E using the NEAMS tools. The MOOSE Reactor Module was employed to set up the geometry mesh, MC2-3 was applied to generate multigroup cross sections at various temperatures, and Griffin was used to calculate the k-eff values of Core I-E across these temperature conditions. To validate the deterministic results from Griffin, reference solutions were obtained with the Monte Carlo code Shift. The reactivity feedback was then derived and compared against SEFOR experimental data from isothermal tests in order to assess the performance of Griffin. Reproducing these results requires licensed access to several code systems, including Shift, Griffin, and MC2-3. Instructions for obtaining and accessing these codes can be found at the following locations: https://www.ornl.gov/scale/releases for SCALE/Shift, https://mooseframework.inl.gov/ncrc/applications/ncrc_root_griffin.html for Griffin, and https://www.anl.gov/nse/mc23 for MC2-3.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Baseline Postirradiation Examination of the AFC-3C, AFC-3D, and AFC-4A Experiments

A long term research focus of the US Department of Energy (DOE) Advanced Fuels Campaign (AFC) is to investigate technologies that can allow for increased actinide utilization in nuclear fuel for fast neutron spectrum reactors. This includes both the incorporation of minor actinides into nuclear fuel for transmutation and high utilization of actinides through “ultra high” burnup fuel. This goal is defined as fuel that can reach a burnup of 30-40 percent fission per initial metal atom (%FIMA) which is higher than what has historically been achieved [1],[2]. Historically, Experimental Breeder Reactor II (EBR-II) Mark III/IIIA/IV driver fuel (U 10Zr fuel with stainless steel 316 or ferritic martensitic steel HT-9 cladding) was qualified to 10%FIMA, but many experimental assemblies and fuel pins achieved higher peak burnup up to near 20%FIMA without failure [3]. The motivation of the irradiation tests explored in this work was to screen candidate alloys and forms that could tolerate very high burnup irradiations of up to 30 % FIMA. In these irradiations, termed AFC 3C, AFC-3D and AFC-4A, uranium-based alloys and forms were irradiated in a prototypic fast reactor spectrum to investigate fuel performance. Irradiations were performed in the Idaho National Laboratory (INL) Advanced Test Reactor (ATR). The performance of these fuels is compared to the historic performance of U-10Zr [4]. Metallic fuel for fast reactors has a long history that has been reviewed several time in the literature [3]–[8].

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

TRANSIENT ANALYSES OF THE VERSATILE TEST REACTOR USING RELAP5-3D

The DOE Office of Nuclear Energy established the Versatile Test Reactor (VTR) program in February 2017 in response to reports outlining the need for a fast spectrum test reactor. In this framework, Idaho National Laboratory (INL), as the proposed hosting site for the VTR, is expanding its capabilities leveraging on its staff nuclear expertise on experiments design and reactors operation, codes development and assessment, advanced safety analyses. One of the key points of this strategy is to develop capabilities necessary to perform transient analyses in order to understand the plant behavior during upset conditions and appropriately quantify margins. In this context system thermal-hydraulic models of the VTR are being developed using the SAS4A/SASSYS-1 code developed at Argonne National Laboratory as well as the INL code RELAP5-3D. The former provides reference analyses whereas the latter could provide an independent assessment of the reference analyses if deemed necessary by the project. This paper focuses on the RELAP5-3D modeling, highlighting the different solutions adopted for correctly analyzing sodium fast reactor behavior. After showing the modeling activities, we present a set of reference transient analyses for protected and unprotected transients, highlighting the intrinsic safety characteristics of the VTR design.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

BFS, a Legacy to the International Reactor Physics, Criticality Safety, and Nuclear Data Communities

Two Organization for Economic Cooperation and Development (OECD) Nuclear Energy Agency (NEA) programs, the International Criticality Safety Benchmark Evaluation Project (ICSBEP) and the International Reactor Physics Experiment Evaluation Project (IRPhEP) have been identifying existing integral experiment data, evaluating those data, and providing integral benchmark specifications for methods and data validation for nearly two decades. The Russian Federation, IPPE, and the BFS laboratories have made substantial contributions to those two projects. Contributions from the BFS facilities are highlighted in this paper.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of a Fast Spectrum Test Loop at the Advanced Test Reactor

The United States currently has no infrastructure to provide a fast neutron flux for research purposes. With the increased interest in Sodium Fast Reactor (SFR) technology, this type of infrastructure is necessary for further development of key components such as Versatile Test Reactor. The purpose of this research is to characterize the thermal hydraulics of a test loop capable of providing SFR like operating conditions. This includes showcasing feasibility in mechanical design, reaching a high fast to thermal neutron flux ratio ideally near 15, an inlet temperature of 600 K, a temperature increase of 50 K from inlet to outlet, and test chamber radial temperature profiles similar to SFR fuel rods. Existing infrastructure must be used to provide the neutron flux for the test loop, and it was decided that the Advanced Test Reactor (ATR) was the optimal choice due to its availability and previous work conducted similar to this project. To achieve the goals of this project, several mechanical designs were put forward with the most feasible design being chosen. The neutronics and thermal hydraulics analysis were conducted in tandem, with an iterative process used to maximize efficiency of both systems. Analysis of the neutronics system was done using Attila and MCNP while the thermal hydraulic analysis was done using RELAP5. This document outlines the thermal hydraulic analysis, though it includes the results from the mechanical design and neutronics analysis. The loop design includes a primary system with molten sodium, a set of “booster fuel plates” to increase the fast flux within the test section, a water system to cool the booster fuel plates, a helium system to separate the sodium and water systems, and a thermal neutron shield to decrease the thermal flux. Each of these systems is modeled in the neutronics and thermal hydraulic analyses. The RELAP5 model showcased the feasibility of the design proposed by this report. For all designs tested, the desired 50 K temperature increase from inlet to outlet was reached. The fuel rod radial temperature profile was lower than was expected, likely due to a lower rod thermal power than expected. A parametric study was also conducted to characterize the system with three fuel pins. This study showed the effect of thermal power, fluid pressure, fluid velocity, and inlet temperature on the system. ©Copyright by Anton Higgins December 11, 2019 All Rights Reserved

99 GENERAL AND MISCELLANEOUS↗

Technical Letter Report of Slow-Strain-Rate Tensile Tests on Irradiated Stainless Steels in a PWR Environment

Slow-strain-rate tensile (SSRT) tests have been performed on irradiated specimens in a simulated pressurized water reactor (PWR) environment. The samples are miniature tensile specimens of various austenitic stainless steels (SSs) with different thermal-mechanical treatments commonly used for reactor core internal components. Neutron irradiation was carried out in the BOR-60 reactor, a sodium-cooled, fast breeder reactor in Russia, at ~320°C. The damage doses of the specimens are 5, 10, and 48 dpa (displacements per atom). All irradiated materials show significant irradiation hardening and loss of ductility in the SSRT tests. The yield strengths of cold-worked are higher than that of solution-annealed samples at all doses up to 48 dpa. While the irradiation hardening seems to saturate between ~5 and ~10 dpa, the loss of ductility continues to increase above 10 dpa. Strain softening is also observed for all irradiated materials above 5 dpa. Fractographic examinations show that ductile dimple fracture is the dominant morphology for all SSRT tests in the PWR environment. Small areas of transgranular, mixed mode and cleavage fractures are seen on most fracture surfaces in PWR water tests. Intergranular cracking is also observed in 48-dpa Types 316 and 347 SSs. Cracking susceptibility of the tested materials was evaluated with fracture morphology and time to failure. In general, high-doses cold-worked SSs are more susceptible to transgranular cleavage cracking in the PWR environment. Solution-annealed Type 347 SS is susceptible to intergranular cracking at 45 dpa in the PWR environment.

Chen, Y.↗

Transient Response to Rapid Cooling of a Stainless Steel Sodium Heat Pipe

Compact fission power systems are under consideration for use in long duration space exploration missions. Power demands on the order of 500 W, to 5 kW, will be required for up to 15 years of continuous service. One such small reactor design consists of a fast spectrum reactor cooled with an array of in-core alkali metal heat pipes coupled to thermoelectric or Stirling power conversion systems. Heat pipes advantageous attributes include a simplistic design, lack of moving parts, and well understood behavior. Concerns over reactor transients induced by heat pipe instability as a function of extreme thermal transients require experimental investigations. One particular concern is rapid cooling of the heat pipe condenser that would propagate to cool the evaporator. Rapid cooling of the reactor core beyond acceptable design limits could possibly induce unintended reactor control issues. This paper discusses a series of experimental demonstrations where a heat pipe operating at near prototypic conditions experienced rapid cooling of the condenser. The condenser section of a stainless steel sodium heat pipe was enclosed within a heat exchanger. The heat pipe - heat exchanger assembly was housed within a vacuum chamber held at a pressure of 50 Torr of helium. The heat pipe was brought to steady state operating conditions using graphite resistance heaters then cooled by a high flow of gaseous nitrogen through the heat exchanger. Subsequent thermal transient behavior was characterized by performing an energy balance using temperature, pressure and flow rate data obtained throughout the tests. Results indicate the degree of temperature change that results from a rapid cooling scenario will not significantly influence thermal stability of an operating heat pipe, even under extreme condenser cooling conditions.

Mireles, Omar R.↗

Status update on the NIFFTE high precision fission cross section measurement program

The Neutron Induced Fission Fragment Tracking Experiment (NIFFTE) program has been underway for nearly two years. The program's mission is to measure fission cross sections of the primary fissionable and fissile materials ({sup 235}U, {sup 239}Pu, {sup 238}U) as well as the minor actinides across energies from approximately 50 keV up to 20 MeV with an absolute uncertainty of less than one percent while investigating energy ranges from below an eV to 600 MeV. This basic nuclear physics data is being reinvestigated to support the next generation power plants and a fast burner reactor program. Uncertainties in the fast, resolved and unresolved resonance regions in plutonium and other transuranics are extremely large, dominating safety margins in the next generation nuclear power plants and power plants of today. This basic nuclear data can be used to support all aspects of the nuciear renaissance. The measurement campaign is utilizing a Time Projection Chamber or TPC as the tool to measure these cross sections to these unprecedented levels. Unlike traditional fission cross section measurements using time-of-flight and a multiple fission foil configurations in which fission cross sections in relation to that of {sup 235}U are performed, the TPC project uses time-of-flight and hydrogen as the benchmark cross section. Using the switch to hydrogen, a simple, smooth cross section that can be used which removes the uncertainties associated with the resolved and unresolved resonances in {sup 235}U.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The Use of Thorium within the Nuclear Power Industry - 13472

Thorium is 3 to 4 times more abundant than uranium and is widely distributed in nature as an easily exploitable resource in many countries. Unlike natural uranium, which contains ∼0.7% fissile {sup 235}U isotope, natural thorium does not contain any fissile material and is made up of the fertile {sup 232}Th isotope only. Therefore thorium and thorium-based fuel as metal, oxide or carbide, has been utilized in combination with fissile {sup 235}U or {sup 239}Pu in nuclear research and power reactors for conversion to fissile {sup 233}U, thereby enlarging fissile material resources. During the pioneering years of nuclear energy, from the mid 1950's to mid 1970's, there was considerable interest worldwide to develop thorium fuels and fuel cycles in order to supplement uranium reserves. Thorium fuels and fuel cycles are particularly relevant to countries having large thorium deposits but very limited uranium reserves for their long term nuclear power programme. The feasibility of thorium utilization in high temperature gas cooled reactors (HTGR), light water reactors (LWR), pressurized heavy water reactors (PHWRs), liquid metal cooled fast breeder reactors (LMFBR) and molten salt breeder reactors (MSBR) were demonstrated. The initial enthusiasm for thorium fuels and fuel cycles was not sustained among the developing countries later, due to new discovery of uranium deposits and their improved availability. However, in recent times, the need for proliferation-resistance, longer fuel cycles, higher burnup, and improved waste form characteristics, reduction of plutonium inventories and in situ use of bred-in fissile material has led to renewed interest in thorium-based fuels and fuel cycles. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Expanded Accident Scenarios and Frequency Characteristics for a Fast Spectrum Molten Salt Reactor in an Integrated Energy System

Integration of advanced nuclear reactors to industrial processes in an integrated energy system (IES) has many potential advantages. The coupling of nuclear power to varied industrial processes introduces additional accident scenarios unique to the specific systems included in the IES. Similarly, noise in one system of the IES could potentially create negative effects in the other systems. Because of the limited amount of comparable nuclear IES operating experience, there is added value in scoping the inherent behavior of these systems in response to these transients. Here, this paper investigates the safety-related behavior of an open-source IES dynamic model of a fast spectrum molten salt reactor (MSR) powering a regenerative Rankine cycle for electricity production and a hybrid sulfur (HyS) cycle for hydrogen production. The simulations include a loss of cooling water to the Rankine cycle, a loss of sulfur in the HyS cycle, and the frequency characteristics of the entire IES across six orders of magnitude of frequency. The results show safe behavior in response to the two accident scenarios, wherein a disruption in heat transfer leads to increased salt temperatures and a decrease in reactor power. The frequency analysis shows that at higher frequencies, temperature changes propagating through an IES are increasingly damped to the point of negligibility.

Dunkle, Nicholas [Univ. of Tennessee, Knoxville, T↗

Transient Cold Flow Simulation of Fast Fluidized Bed Fuel Reactors for Chemical-Looping Combustion

Circulating fluidized bed in chemical-looping combustion (CLC) is a recent technology that provides great advantage for gas–solid interaction and efficiency. In order to obtain a thorough understanding of this technology and to assess its effectiveness for industrial scale deployment, numerical simulations are conducted. Computational fluid dynamics (CFD) simulations are performed with dense discrete phase model (DDPM) to simulate the gas–solid interactions. CFD commercial software ansysfluent is used for the simulations. Two bed materials of different particle density and diameter, namely the molochite and Fe100, are used in studying the hydrodynamics and particle behavior in a fuel reactor corresponding to the experimental setup of Haider et al. (2016, “A Hydrodynamic Study of a Fast-Bed Dual Circulating Fluidized Bed for Chemical Looping Combustion,” Energy Technol., 4(10), pp. 1254–1262.) at Cranfield University in the UK. Both the simulations show satisfactory agreement with the experimental data for both the static pressure and volume fraction at various heights above the gas inlet in the reactor. It is found that an appropriate drag law should be used in the simulation depending on the particle size and flow conditions in order to obtain accurate results. Furthermore, the simulations demonstrate the ability of CFD/DDPM to accurately capture the physics of circulating fluidized bed-based CLC process at pilot scale which can be extended to industrial scale projects.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Reactor-Based Management of Used Nuclear Fuel: Assessment of Major Options

This paper discusses the current status of the ongoing Advanced Fuel Cycle Initiative (AFCI) program in the U.S. Department of Energy that is investigating the potential for using the processing and recycling of used nuclear fuel to improve radioactive waste management, including used fuel. A key element of the strategies is to use nuclear reactors for further irradiation of recovered chemical elements to transmute certain long-lived highly-radioactive isotopes into less hazardous isotopes. Both thermal and fast neutron spectrum reactors are being studied as part of integrated nuclear energy systems where separations, transmutation, and disposal are considered. Radiotoxicity is being used as one of the metrics for estimating the hazard of used fuel and the processing of wastes resulting from separations and recycle-fuel fabrication. Decay heat from the used fuel and/or wastes destined for disposal is used as a metric for use of a geologic repository. Results to date indicate that the most promising options appear to be those using fast reactors in a repeated recycle mode to limit buildup of higher actinides, since the transuranic elements are a key contributor to the radiotoxicity and decay heat. Using such an approach, there could be much lower environmental impact from the high-level waste as compared to direct disposal of the used fuel, but there would likely be greater generation of low-level wastes that will also require disposal. An additional potential waste management benefit is having the ability to tailor waste forms and contents to one or more targeted disposal environments (i.e., to be able to put waste in environments best-suited for the waste contents and forms).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗