Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Fluctuating hydrodynamics of reactive liquid mixtures

Fluctuating hydrodynamics (FHD) provides a framework for modeling microscopic fluctuations in a manner consistent with statistical mechanics and nonequilibrium thermodynamics. This paper presents an FHD formulation for isothermal reactive incompressible liquid mixtures with stochastic chemistry. Fluctuating multispecies mass diffusion is formulated using a Maxwell-Stefan description without assuming a dilute solution, and momentum dynamics is described by a stochastic Navier-Stokes equation for the fluid velocity. We consider a thermodynamically consistent generalization for the law of mass action for non-dilute mixtures and use it in the chemical master equation (CME) to model reactions as a Poisson process. The FHD approach provides remarkable computational efficiency over traditional reaction-diffusion master equation methods when the number of reactive molecules is large, while also retaining accuracy even when there are as few as ten reactive molecules per hydrodynamic cell. We present a numerical algorithm to solve the coupled FHD and CME equations and validate it on both equilibrium and nonequilibrium problems. We simulate a diffusively driven gravitational instability in the presence of an acid-base neutralization reaction, starting from a perfectly flat interface. We demonstrate that the coupling between velocity and concentration fluctuations dominates the initial growth of the instability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparative study on the formation of Cr and Ti ohmic contacts to (001) β -Ga 2 O 3

Here, a comparative study of Cr/Au and Ti/Au ohmic contacts on (001) β-Ga 2 O 3 was conducted. The electrical behavior from current-voltage measurements and the interfacial composition and microstructure as determined from high-resolution transmission electron microscopy (TEM) with energy dispersive x-ray analysis were compared for the different contacts at selected points in an annealing series (300–700 °C, 1 min. anneals in N 2 ). Cr/Au contacts became ohmic at temperatures (300–350 °C) approximately 50–100 °C lower than Ti/Au contacts (400–450 °C). Cr/Au and Ti/Au contacts demonstrated optimal ohmic behavior (lowest resistance) when annealed to 450–500 and 500–600 °C, respectively, with Ti/Au contacts yielding a lower total resistance than Cr/Au. Cross-sectional TEM images of Cr/Au contacts annealed at 450 °C revealed the presence of Au nanoclusters at the Ga 2 O 3 interface and CrO x layers at both the top of the contact and the Ga 2 O 3 interface. Whereas TiO x also formed at the top and bottom interfaces in 450 °C-annealed Ti/Au contacts, the TiO x surface layer appeared to be variable in thickness and/or discontinuous, unlike the CrO x surface layer. Au nanoclusters were not detected at the interface in the Ti/Au contacts. The interdiffusion and oxidation observed in both contact metallizations point to the need for diffusion barriers that may allow these contacts to be used in future Ga 2 O 3 -based devices that operate at elevated temperatures.

36 MATERIALS SCIENCE↗

Anomalous interfacial dynamics of single proton charges in binary aqueous solutions

Our understanding of the dynamics of charge transfer between solid surfaces and liquid electrolytes has been hampered by the difficulties in obtaining interface, charge, and solvent-specific information at both high spatial and temporal resolution. Here, we measure at the single charge scale the dynamics of protons at the interface between an hBN crystal and binary mixtures of water and organic amphiphilic solvents (alcohols and acetone), evidencing a marked influence of solvation on interfacial dynamics. Applying single-molecule localization microscopy to emissive crystal defects, we observe correlated activation between adjacent ionizable surface defects, mediated by the transport of single excess protons along the solid/liquid interface. Solvent content has a nontrivial effect on interfacial dynamics, leading at intermediate water fraction to an increased surface diffusivity, as well as an increased affinity of the proton charges to the solid surface. Our measurements evidence the notable role of solvation on interfacial proton charge transport.

36 MATERIALS SCIENCE↗

Specific features of the ion-beam synthesis of Ge nanocrystals in SiO{sub 2} thin films

The systematic features of the formation of Ge nanocrystals in SiO{sub 2} thin films implanted with Ge{sup +} ions and then subjected to high-temperature annealing (1130°C) are studied in relation to hydrostatic pressure. It is established that annealing at atmospheric pressure is accompanied by the diffusion of Ge atoms from the implantation region to the Si substrate and does not induce the formation of Ge nanocrystals. An increase in pressure during annealing yields a deceleration in the diffusion of germanium into silicon and is accompanied by the formation of twinned lamellae at the Si/SiO{sub 2} interface (at pressures of ~10{sup 3} bar) or by the nucleation and growth of Ge nanocrystals (at pressures of ~10{sup 4} bar) in the SiO{sub 2} film. The results are discussed on the basis of the concept of a change in the activation volume of the formation and migration of point defects under conditions of compression.

36 MATERIALS SCIENCE↗

Scalable Matrix-Free Adaptive Product-Convolution Approximation for Locally Translation-Invariant Operators

We present an adaptive grid matrix-free operator approximation scheme based on a "product-convolution" interpolation of convolution operators. This scheme is appropriate for operators that are locally translation-invariant, even if these operators are high rank or full rank. Such operators arise in Schur complement methods for solving partial differential equations (PDEs), as Hessians in PDE-constrained optimization and inverse problems, as integral operators, as covariance operators, and as Dirichlet-to-Neumann maps. Constructing the approximation requires computing the impulse responses of the operator to point sources centered on nodes in an adaptively refined grid of sample points. A randomized a posteriori error estimator drives the adaptivity. Once constructed, the approximation can be efficiently applied to vectors using the fast Fourier transform. The approximation can be efficiently converted to hierarchical matrix (H-matrix) format, then inverted or factorized using scalable H-matrix arithmetic. The quality of the approximation degrades gracefully as fewer sample points are used, allowing cheap lower quality approximations to be used as preconditioners. Furthermore, this yields an automated method to construct preconditioners for locally translation-invariant Schur complements. We directly address issues related to boundaries and prove that our scheme eliminates boundary artifacts. We test the scheme on a spatially varying blurring kernel, on the nonlocal component of an interface Schur complement for the Poisson operator, and on the data misfit Hessian for an advection dominated advection-diffusion inverse problem. Numerical results show that the scheme outperforms existing methods.

97 MATHEMATICS AND COMPUTING↗

Recent Advances in Continuum Modeling of Interfacial and Transport Phenomena in Electric Double Layer Capacitors

Here, whis paper reviews recent advances in physical modeling of interfacial and transport phenomena in electric double layer capacitors (EDLCs) under both equilibrium and dynamic cycling. The models are based on continuum theory and account for (i) the Stern layer at the electrode/electrolyte interface, (ii) finite ion sizes, (iii) steric repulsions, (iv) asymmetric electrolytes featuring ions with different valencies, effective diameters, or diffusion coefficients, (v) electric-field-dependent dielectric permittivity of the electrolyte, and/or (vi) porous three-dimensional morphology of the electrodes. Typical characterization methods such as electrochemical impedance spectroscopy, cyclic voltammetry, and galvanostatic cycling were reproduced numerically to identify the dominant physical phenomena and to gain insight into experimental observations. In addition, recent thermal models derived from first principles for EDLCs under constant-current cycling accounting for irreversible Joule heating and reversible heat generation rates due to ion diffusion, steric effects, and changes in entropy are discussed. Scaling analyses of both equilibrium and dynamic models are also presented as a way to identify self-similar and asymptotic behaviors as well as to develop design rules for electrodes and electrolytes of next generation EDLCs. Throughout the document, special effort has been made to compare model predictions with experimental observations and reported data.

25 ENERGY STORAGE↗

2018 fourth quarter report to NA-22 on Particle Classifier

This was the final quarter of the third and final year of this project. The team prepared and submitted this project’s final report to NA-22. Work during this quarter included responding to reviewer requests for the unsupervised statistical model paper for the American Statistical Association journal, and completing and submitting the paper about the semi-supervised statistical model to NIMA. We received the report from our North Carolina State University collaborators from the NA-22-sponsored CNEC Consortium, Professor Wilson and student Allen. The report describes their investigation of Dirichlet Process (DP) Gaussian Mixture Models based on pulse shape data from this project. The report is an appendix to this project’s final report, and may be converted into a journal paper in the coming year. Work was performed on the user interface to the Struck firmware. The project team submitted a draft workplan to NA-22 regarding additional work to diffuse improved PSD methods through the NA-22 fast neutron detection community.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Brazing method produces solid-solution bond between refractory metals

Brazing two refractory metals by diffusion bonding minimizes distortion and avoids excessive grain growth in the metals. This method requires the selection of an interface metal that forms intermediate low-melting eutectics or solid solutions with the metals to be brazed.

Source record↗

Flow-induced morphological instabilities due to temporally-modulated stagnation-point flow

The influence of periodically-modulated planar stagnation-point flow on the morphological stability of a directionally-solidifying interface is presently considered with a view to the effect of unsteady nonparallel flows on single-crystal growth. The modeling of the system assumes that the viscous boundary layer thickness is much greater than that of the solute boundary layer, and that the modulation frequency is much smaller than the strength of plane stagnation-point flow. The solidifying interface is either stabilized or destabilized depending on the ratio of the period of modulation to the solute-diffusion time.

Merchant, G. J.↗

The disk-halo interface in edge-on spirals

We are studying the disk-halo interface in several edge-on spiral galaxies through extensive imagery in H(alpha) and other emission lines from Diffuse Ionized Gas (DIG), also referred to as the Warm Ionized Medium (WIM). In addition, for the nearby Sc galaxy NGC4631 we have obtained x-ray observations with ROSAT, to map the distribution of hot (10(exp 6) - 10(exp 7)) gas in the disk and halo. Here we present initial results for two late-type spirals, NGC4244 and NGC4631.

Walterbos, Rene↗

Cryogenic Optical Assembly (COA) cooldown analysis for the Cosmic Background Explorer (COBE)

The Cosmic Background Explorer (COBE) spacecraft, developed by Goddard Space Flight Center (GSFC), was successfully launched on November 18, 1989 aboard a Delta expendable launch vehicle. Two of the three instruments for this mission were mounted inside a liquid helium (LHe) dewar which operates at a temperature of 2 K. These two instruments are the Diffuse Infrared Background Experiment (DIRBE) and the Far Infrared Absolute Spectrophotometer (FIRAS). They are mounted to a common Instrument Interface Structure (IIS) and the entire assembly is called the Cryogenic Optical Assembly (COA). As part of the structural verification requirement, it was necessary to show that the entire COA exhibited adequate strength and would be capable of withstanding the launch environment. This requirement presented an unique challenge for COBE because the COA is built and assembled at room temperature (300 K), cooled to 2 K, and then subjected to launch loads. However, strength testing of the entire COA at 2 K could not be done because of facility limitations. Therefore, it was decided to perform the strength verification of the COA by analysis.

Coladonato, Robert J.↗

Evaluation of the Emergency Response Dose Assessment System(ERDAS)

The emergency response dose assessment system (ERDAS) is a protype software and hardware system configured to produce routine mesoscale meteorological forecasts and enhanced dispersion estimates on an operational basis for the Kennedy Space Center (KSC)/Cape Canaveral Air Station (CCAS) region. ERDAS provides emergency response guidance to operations at KSC/CCAS in the case of an accidental hazardous material release or an aborted vehicle launch. This report describes the evaluation of ERDAS including: evaluation of sea breeze predictions, comparison of launch plume location and concentration predictions, case study of a toxic release, evaluation of model sensitivity to varying input parameters, evaluation of the user interface, assessment of ERDA's operational capabilities, and a comparison of ERDAS models to the ocean breeze dry gultch diffusion model.

Evans, Randolph J.↗

Numerical Modeling of Physical Vapor Transport in Contactless Crystal Growth Geometry

Growth from the vapor under conditions of limited contact with the walls of the growth ampoule is beneficial for the quality of the growing crystal due to reduced stress and contamination which may be caused by interactions with the growth container. The technique may be of a particular interest for studies on crystal growth under microgravity conditions: elimination of some factors affecting the crystal quality may make interpretation of space-conducted processes more conclusive and meaningful. For that reason, and as a part of our continuing studies on 'contactless' growth technique, we have developed a computational model of crystal growth process in such system. The theoretical model was built, and simulations were performed using the commercial computational fluid dynamics code, (CFD) ACE. The code uses an implicit finite volume formulation with a gray discrete ordinate method radiation model which accounts for the diffuse absorption and reflection of radiation throughout the furnace. The three-dimensional model computes the heat transfer through the crystal, quartz, and gas both inside and outside the ampoule, and mass transport from the source to the crystal and the sink. The heat transport mechanisms by conduction, natural convection, and radiation, and mass transport by diffusion and convection are modeled simultaneously and include the heat of the phase transition at the solid-vapor interfaces. As the thermal boundary condition, temperature profile along the walls of the furnace is used. For different thermal profiles and furnace and ampoule dimensions, the crystal growth rate and development of the crystal-vapor and source-vapor interfaces (change of the interface shape and location with time) are obtained. Super/under-saturation in the ampoule is determined and critical factors determining the 'contactless' growth conditions are identified and discussed. The relative importance of the ampoule dimensions and geometry, the furnace dimensions and its temperature, and the properties of the grown material are analyzed. The results of the simulations are compared with related experimental results on growth of CdTe, CdZnTe, ZnTe, PbTe, and PbSnTe crystals by this technique.

Palosz, W.↗

Thermal Transport Model for Heat Sink Design

A document discusses the development of a finite element model for describing thermal transport through microcalorimeter arrays in order to assist in heat-sinking design. A fabricated multi-absorber transition edge sensor (PoST) was designed in order to reduce device wiring density by a factor of four. The finite element model consists of breaking the microcalorimeter array into separate elements, including the transition edge sensor (TES) and the silicon substrate on which the sensor is deposited. Each element is then broken up into subelements, whose surface area subtends 10 10 microns. The heat capacity per unit temperature, thermal conductance, and thermal diffusivity of each subelement are the model inputs, as are the temperatures of each subelement. Numerical integration using the Finite in Time Centered in Space algorithm of the thermal diffusion equation is then performed in order to obtain a temporal evolution of the subelement temperature. Thermal transport across interfaces is modeled using a thermal boundary resistance obtained using the acoustic mismatch model. The document concludes with a discussion of the PoST fabrication. PoSTs are novel because they enable incident x-ray position sensitivity with good energy resolution and low wiring density.

Chervenak, James A.↗

Interfacial stability of CoSi2/Si structures grown by molecular beam epitaxy

The stability of CoSi2/Si interfaces was examined in this study using columnar silicide structures grown on (111) Si substrates. In the first set of experiments, Co and Si were codeposited using MBE at 800 C and the resulting columnar silicide layer was capped by epitaxial Si. Deposition of Co on the surface of the Si capping layer at 800 C results in the growth of the buried silicide columns. The buried columns grow by subsurface diffusion of the deposited Co, suppressing the formation of surface islands of CoSi2. The column sidewalls appear to be less stable than the top and bottom interfaces, resulting in preferential lateral growth and ultimately in the coalescence of the columns to form a continuous buried CoSi2 layer. In the second set of experiments, annealing of a 250 nm-thick buried columnar layer at 1000 C under a 100 nm-thick Si capping layer results in the formation of a surface layer of CoSi2 with a reduction in the sizes of the CoSi2 columns. For a sample having a thicker Si capping layer the annealing leads to Ostwald ripening producing buried equiaxed columns. The high CoSi2/Si interfacial strain could provide the driving force for the observed behavior of the buried columns under high-temperature annealing.

George, T.↗

Modeling and Simulating Diffused Aeration for Hydrogen Removal from Expansion Tanks of Parabolic Trough Solar Thermal Power Plants

High-temperature decomposition of organic heat transfer fluids (HTFs) can cause hydrogen build-up in the receiver annulus of parabolic trough power plants. This build-up increases the receiver thermal losses and results in a decline in power output. Prior work has shown that removal of hydrogen from the expansion tank can be an effective mitigation strategy. This paper presents a modeling methodology and simulation results for passive and diffused aeration removal of hydrogen from the expansion tank. Focus is on estimating the mass transfer of hydrogen from the HTF into the headspace gas across the surface and bubble liquid/gas interfaces. Simulations for the operation conditions and expansion tank geometry of the Nevada Solar One power plant (located near Las Vegas, Nevada, USA) show that passive removal (surface mass transfer only) may be sufficient to obtain hydrogen removal rates of 1.7 x 10-4 mol/s (minimal removal rate necessary). A diffused aeration system (surface plus bubble mass transfer) with gas injection volume rates up to 100 L/s may be necessary to obtain a hydrogen removal rate of 2.0 x 10-4 mol/s (optimal removal rate).

14 SOLAR ENERGY↗

The FUNPET—a New Hybrid Ion Funnel-Ion Carpet Atmospheric Pressure Interface for the Simultaneous Transmission of a Broad Mass Range

An atmospheric pressure interface transports ions from ambient pressure to the low-pressure environment of a mass spectrometer. A capillary coupled to an ion funnel is widely used. However, conventional ion funnels do little to negate the large amount of energy picked up by high-mass ions from the gas flow through the capillary. There has been little work done on the effects of gas flow on ion transmission, and the previous studies have all been limited to low-mass, low-charge ions. In this work, we account for the effects of gas flow, diffusion, and electric fields (static and oscillating) on ion trajectories and use simulations to design a new hybrid ion funnel-ion carpet (FUNPET) interface that transmits a broad mass range with a single set of instrument conditions. The design incorporates a virtual jet disruptor where pressure buildup and counter flow dissipate the supersonic jet that results from gas flow into the interface. This, and the small exit aperture that can be used with the FUNPET, reduces the gas flow into the next stage of differential pumping. The virtual jet disruptor thermalizes ions with a broad range of masses (1 kDa to 1 GDa), and once thermalized, they are transmitted into next region of the mass spectrometer with low excess kinetic energy. The FUNPET interface is easy to fabricate from flexible printed circuit board and a support frame made by 3D printing. The performance of the interface was evaluated using charge detection mass spectrometry. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Capillary, wettability and interfacial dynamics in polymer electrolyte fuel cells

In the present scenario of a global initiative toward a sustainable energy future, the polymer electrolyte fuel cell (PEFC) has emerged as one of the most promising alternative energy conversion devices for different applications. Despite tremendous progress in recent years, a pivotal performance/durability limitation in the PEFC arises from liquid water transport, perceived as the Holy Grail in PEFC operation. The porous catalyst layer (CL), fibrous gas diffusion layer (GDL) and flow channels play a crucial role in the overall PEFC performance due to the transport limitation in the presence of liquid water and flooding phenomena. Although significant research, both theoretical and experimental, has been performed, there is serious paucity of fundamental understanding regarding the underlying structure-transport-performance interplay in the PEFC. The inherent complex morphologies, micro-scale transport physics involving coupled multiphase, multicomponent, electrochemically reactive phenomena and interfacial interactions in the constituent components pose a formidable challenge. In this paper, the impact of capillary transport, wetting characteristics and interfacial dynamics on liquid water transport is presented based on a comprehensive mesoscopic modeling framework with the objective to gain insight into the underlying electrodynamics, two-phase dynamics and the intricate structure-transport-interface interactions in the PEFC.

08 HYDROGEN↗