Search NASA⌕ Search

SEARCH · Search NASA

Results for “process screening”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Inhibition of asphaltene aggregation using deep eutectic solvents: COSMO-RS calculations and experimental validation

Asphaltene precipitation/deposition adversely affects various oil and gas processes, such as oil recovery, transportation, and petroleum processing. The resulting increase in viscosity of crude oil decreases distillate yields creating unstable phase separation. Deep eutectic solvents (DESs) have recently gained interest as inhibitors of asphaltene aggregation. The goal of the present study is to derive the mechanism of inhibition of petroleum asphaltene aggregation by a novel screening of DESs. An archipelago-based chemical structure of asphaltene was adopted for performing quantum chemical calculations. The structure was used in the conductor-like screening model for real solvents (COSMO-RS) model to screen potential DESs for asphaltene precipitation. It was found that DESs containing thymol were the most promising of the 153 DES combinations screened. The COSMO-RS predictions were validated experimentally using solubility data of asphaltene in DESs. Among the studied DESs, thymol-diphenyl ether provided the highest solubility for asphaltene, which was further validated using the experimental and the COSMO-RS predicted data. In addition, to characterize the structural interactions between asphaltene and DESs, Fourier transform infrared (FTIR) spectroscopy and nuclear magnetic resonance (NMR) measurements were performed. It was found that strong interaction between asphaltene and the DESs is responsible for the higher asphaltene dispersion. Finally, the present approach opens pathways to rationally design and understand the impact of structural variation of DESs based on their interactions with asphaltene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanism of Hydrogen Evolution Reaction on 1T-MoS 2 from First Principles

The 1T phase of transition-metal dichalcogenides (TMDs) has been shown in recent experiments to display excellent catalytic activity for hydrogen evolution reaction (HER), but the catalytic mechanism has not been elucidated so far. Herein, using 1T MoS 2 as the prototypical TMD material, we studied the HER activity on its basal plane from periodic density functional theory (DFT) calculations. Compared to the nonreactive basal plane of 2H phase MoS 2 , the catalytic activity of the basal plane of 1T phase MoS 2 mainly arises from its affinity for binding H at the surface S sites. Using the binding free energy (ΔG H ) of H as the descriptor, we found that the optimum evolution of H2 will proceed at surface H coverage of 12.5% ~ 25%. Within this coverage, we viewed the reaction energy and barrier for the three elementary steps of the HER process. The Volmer step was found to be facile, whereas the subsequent Heyrovsky reaction is kinetically more favorable than the Tafel reaction. Our results suggest that at low overpotential, HER can take place readily on the basal plane of 1T MoS 2 via the Volmer–Heyrovsky mechanism. Moreover, we screened the dopants for the HER activity and found that substitutional doping of the Mo atom by metals such as Mn, Cr, Cu, Ni, and Fe can make 1T MoS 2 a better HER catalyst.

1T MoS2↗

Cell-specific measurements show nitrogen fixation by particle-attached putative non-cyanobacterial diazotrophs in the North Pacific Subtropical Gyre

Abstract Biological nitrogen fixation is a major important source of nitrogen for low-nutrient surface oceanic waters. Nitrogen-fixing (diazotrophic) cyanobacteria are believed to be the primary contributors to this process, but the contribution of non-cyanobacterial diazotrophic organisms in oxygenated surface water, while hypothesized to be important, has yet to be demonstrated. In this study, we used simultaneous 15 N-dinitrogen and 13 C-bicarbonate incubations combined with nanoscale secondary ion mass spectrometry analysis to screen tens of thousands of mostly particle-associated, cell-like regions of interest collected from the North Pacific Subtropical Gyre. These dual isotope incubations allow us to distinguish between non-cyanobacterial and cyanobacterial nitrogen-fixing microorganisms and to measure putative cell-specific nitrogen fixation rates. With this approach, we detect nitrogen fixation by putative non-cyanobacterial diazotrophs in the oxygenated surface ocean, which are associated with organic-rich particles (<210 µm size fraction) at two out of seven locations sampled. When present, up to 4.1% of the analyzed particles contain at least one active putative non-cyanobacterial diazotroph. The putative non-cyanobacterial diazotroph nitrogen fixation rates (0.76 ± 1.60 fmol N cell −1 d −1 ) suggest that these organisms are capable of fixing dinitrogen in oxygenated surface water, at least when attached to particles, and may contribute to oceanic nitrogen fixation.

59 BASIC BIOLOGICAL SCIENCES↗

Evaluation of current density measurement methods for high-current, low-beta electron beams

Recent current density measurements with a low-beta electron beam (β=0.5-0.75) are strongly affected by electron scatter and Cherenkov limits. These invasive measurements are heavily influenced by the electron energy and the intercepting material properties: density, index of refraction, and atomic number. We evaluate various measurement methods, including x-ray scintillation and Cherenkov emission. To optimize the x-ray scintillation technique for this energy regime, metal foils of differing atomic number (Z) and thickness were placed upstream of a scintillation screen. We have selected Cherenkov emitters, based on a material refractive index, in order to differentiate the contributions from electron scatter and produced fluorescence, Cherenkov emission, and total internal reflection. The observed distributions for both approaches are verified through MCNP6®. Additionally, the simulations provide insight as to what physical processes dominate the measured distribution. We conclude by determining the limits and optimal measurement range for each measurement technique.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Caltech campus executive LDRD.

The environment most brain systems of humans and other animals are almost constantly confronted with is complex and continuously changing, with each time step updating a potentially bewildering set of opportunities and demands for action. Far from the controlled, discrete trials used in most neuro- and psychological investigations, behavior outside the lab at Caltech is a seamless and continuous process of monitoring (and error correction) of ongoing action, and of evaluating persistence in the current activity with respect to opportunities to switch tasks as alternatives become available. Prior work on frontopolar and prefrontal task switching, use tasks within the same modality (View a stream of symbols on a screen and perform certain response mappings depending on task rules). However, in these task switches the effector is constant: only the mapping of visual symbols to the specific button changes. In this task, the subjects are choosing what kinds of future action decisions they want to perform, where they can control either which body part will act, or which direction they will orient an instructed body action. An effector choice task presents a single target and the subject selects which effector to use to reach the target (eye or hand). While the techniques available for humans can be less spatially resolved compared to non-human primate neural data, they do allow for experimentation on multiple brain areas with relative ease. Thus, we address a broader network of areas involved in motor decisions. We aim to resolve a current dispute regarding the specific functional roles of brain areas that are often co-activated in studies of decision tasks, dorsal premotor cortex(PMd) and posterior parietal cortex(PPC). In one model, the PPC distinctly drives intentions for action selection, whereas PMd stimulation results in complex multi-joint movements without any awareness of, nor subjective feeling of, willing the elicited movement, thus seems to merely help execute the chosen action.

Shepodd, Timothy J.↗

Projector Selection for SOFAST Testing

In Concentrating Solar Power (CSP) there is a need for mirrors that are optically accurate, as they are used to focus light onto a receiver at high concentration. To test the accuracy of the mirrors’ optical slopes, we employ a technique called deflectometry. Deflectometry measures mirror slope directly. A projector displays an image onto a screen or wall, and a mirror is positioned to reflect the image to a camera. The camera sees the mirror’s reflection of the screen and sends imaging information to software which analyzes the reflected images from the mirror to determine the local slopes and curvature of the mirror. For this, projectors that can provide a crisp and clear image are imperative. Choosing the right projector(s) can be a long and tedious process; this paper will cover the process we used to select projectors for the SOFAST systems in the Sandia Concentrating Solar Optics Laboratory (CSOL).

14 SOLAR ENERGY↗

Robust High-Throughput Phenotyping with Deep Segmentation Enabled by a Web-Based Annotator

The abilities of plant biologists and breeders to characterize the genetic basis of physiological traits are limited by their abilities to obtain quantitative data representing precise details of trait variation, and particularly to collect this data at a high-throughput scale with low cost. Although deep learning methods have demonstrated unprecedented potential to automate plant phenotyping, these methods commonly rely on large training sets that can be time-consuming to generate. Intelligent algorithms have therefore been proposed to enhance the productivity of these annotations and reduce human efforts. We propose a high-throughput phenotyping system which features a Graphical User Interface (GUI) and a novel interactive segmentation algorithm: Semantic-Guided Interactive Object Segmentation (SGIOS). By providing a user-friendly interface and intelligent assistance with annotation, this system offers potential to streamline and accelerate the generation of training sets, reducing the effort required by the user. Our evaluation shows that our proposed SGIOS model requires fewer user inputs compared to the state-of-art models for interactive segmentation. As a case study of the use of the GUI applied for genetic discovery in plants, we present an example of results from a preliminary genome-wide association study (GWAS) of in planta regeneration in Populus trichocarpa (poplar). We further demonstrate that the inclusion of a semantic prior map with SGIOS can accelerate the training process for future GWAS, using a sample of a dataset extracted from a poplar GWAS of in vitro regeneration. The capabilities of our phenotyping system surpass those of unassisted humans to rapidly and precisely phenotype our traits of interest. The scalability of this system enables large-scale phenomic screens that would otherwise be time-prohibitive, thereby providing increased power for GWAS, mutant screens, and other studies relying on large sample sizes to characterize the genetic basis of trait variation. Our user-friendly system can be used by researchers lacking a computational background, thus helping to democratize the use of deep segmentation as a tool for plant phenotyping.

54 ENVIRONMENTAL SCIENCES↗

Comparison of Geochemical Reactivity of Marcellus and Caney Shale Based on Effluent Analysis

ABSTRACT: In this comparative study, we analyzed the changes in elemental concentrations of hydraulic fracturing fluids after interaction with the Marcellus and Caney Shale formations. The focus was on assessing the inherent risks and environmental implications associated with flowback waters, including their impact on soil, ground, and drinking water quality, and human health safety. The chemical compositions of effluents were determined through Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) and Mass spectrometry (ICP-MS). The Marcellus Shale, showed concentrations of Cd, averaging 0.380 ppm far exceeding safe water thresholds. Significant levels of As, Se, B, and Pb were detected in both shales, raising concerns about soil and water contamination. Analyzing the effluents from representative samples of sections of the Marcellus (S2 and S7) and Caney (R1 and R2) indicates different geochemical responses over 4 weeks of experiments. This comparison underscores the chemical changes and environmental considerations linked to hydraulic fracturing across shale formations, suggesting the value of tailored monitoring and regulatory measures for each type. 1. INTRODUCTION The Caney and Marcellus shales, differing in geology and geochemistry, represent distinct unconventional reservoirs. The Caney shale, is more ductile, with higher produced water volumes, (Smith et al., 2022) contrasts with the brittle Marcellus shale known for lower brine production but significant data availability. This study aims to elucidate the possible environmental health and safety issues that may arise from the hydraulic fracturing processes. The interaction between fracturing fluids and clays presents a significant challenge. The primary base of these fluids is water, which, when introduced to clay, can induce swelling and constrict flow pathways. This phenomenon is attributed to water molecules infiltrating the layers of clay, particularly in 2:1-type clays, leading to an increased distance between layers. To counteract this, clay stabilizers are employed (Awejori et al., 2021). Despite their effectiveness, these stabilizers are considered temporary solutions. Upon completion of the fracturing process, a concomitant amount of contaminated waters (flow back), with varied content is collected at the surface. From these, we can infer the geochemical reactions and the environmental challenges associated with these waters. Flowback waters can be reinjected or used for other purposes such as irrigation. This requires adequate screening and treatment for safe use.

Dje, L. B.↗

Study of removal of ammonia from urine vapor by dual catalyst

The feasibility of ammonia removal from urine vapor by a low temperature dual-catalyst system was investigated. The process is based on the initial catalytic oxidation of ammonia present in urine vapor to nitrogen and nitrous oxide, followed by a catalytic decomposition of the nitrous oxide formed into its elements. The most active catalysts for the oxidation of ammonia and for the decomposition of N2O, identified in screening tests, were then combined into dual catalyst systems and tested to establish their overall efficiencies for the removal of ammonia from artificial gas mixtures. Dual catalyst systems capable of ammonia removal from the artificial gas mixtures were then tested with the actual urine vapor produced by boiling untreated urine. A suitable dual catalyst bed arrangement was found that achieved the removal of ammonia and organic carbon, and recovered water of good quality from urine vapor.

Budininkas, P.↗

Molded composite pyrogen igniter for rocket motors

A lightweight pyrogen igniter assembly including an elongated molded plastic tube adapted to contain a pyrogen charge was designed for insertion into a rocket motor casing for ignition of the rocket motor charge. A molded plastic closure cap provided for the elongated tube includes an ignition charge for igniting the pyrogen charge and an electrically actuated ignition squib for igniting the ignition charge. The ignition charge is contained within a portion of the closure cap, and it is retained therein by a noncorrosive ignition pellet retainer or screen which is adapted to rest on a shoulder of the elongated tube when the closure cap and tube are assembled together. A circumferentially disposed metal ring is provided along the external circumference of the closure cap and is molded or captured within the plastic cap in the molding process to provide, along with O-ring seals, a leakproof rotary joint.

Heier, W. C.↗

Quantitative optical scanning tests of complex microcircuits

An approach for the development of the optical scanner as a screening inspection instrument for microcircuits involves comparing the quantitative differences in photoresponse images and then correlating them with electrical parameter differences in test devices. The existing optical scanner was modified so that the photoresponse data could be recorded and subsequently digitized. A method was devised for applying digital image processing techniques to the digitized photoresponse data in order to quantitatively compare the data. Electrical tests were performed and photoresponse images were recorded before and following life test intervals on two groups of test devices. Correlations were made between differences or changes in the electrical parameters of the test devices.

Erickson, J. J.↗

Definition Of Touch-Sensitive Zones For Graphical Displays

Touch zones defined simply by touching, while editing done automatically. Development of touch-screen interactive computing system, tedious task. Interactive Editor for Definition of Touch-Sensitive Zones computer program increases efficiency of human/machine communications by enabling user to define each zone interactively, minimizing redundancy in programming and eliminating need for manual computation of boundaries of touch areas. Information produced during editing process written to data file, to which access gained when needed by application program.

Monroe, Burt L., III↗

Waste Site Mapping

Old aircraft considered not restorable are melted down in on-site furnaces to reclaim the aluminum in their airframes. The process produces aluminum ingots and leaves a residue known as "dross." Because dross contains contaminants like lead silver cadmium and copper, Pima County, the dross dumping site, wanted to locate areas where dross had been dumped. Dr. Larry Lepley and Sandra L. Perry used the Landsat Thematic Mapper to screen for dross. A special two-step procedure was developed to separate the dross dumps (typically no larger than 50 meters across) from the desert background. The project has opened the door for similar applications.

Source record↗

Observations of the Interaction and Transport of Fine Mode Aerosols With Cloud and/or Fog in Northeast Asia From Aerosol Robotic Network and Satellite Remote Sensing

Analysis of Sun photometer measured and satellite retrieved aerosol optical depth (AOD) datahas shown that major aerosol pollution events with very highfine mode AOD (>1.0 in midvisible) in theChina/Korea/Japan region are often observed to be associated with significant cloud cover. This makesremote sensing of these events difficult even for high temporal resolution Sun photometer measurements.Possible physical mechanisms for these events that have high AOD include a combination of aerosolhumidification, cloud processing, and meteorological covariation with atmospheric stability andconvergence. The new development of Aerosol Robotic Network Version 3 Level 2 AOD with improved cloudscreening algorithms now allow for unprecedented ability to monitor these extremefine mode pollutionevents. Further, the spectral deconvolution algorithm (SDA) applied to Level 1 data (L1; no cloud screening)provides an even more comprehensive assessment offine mode AOD than L2 in current and previous dataversions. Studying the 2012 winter-summer period, comparisons of Aerosol Robotic Network L1 SDA dailyaveragefine mode AOD data showed that Moderate Resolution Imaging Spectroradiometer satellite remotesensing of AOD often did not retrieve and/or identify some of the highestfine mode AOD events in thisregion. Also, compared to models that include data assimilation of satellite retrieved AOD, the L1 SDAfinemode AOD was significantly higher in magnitude, particularly for the highest AOD events that were oftenassociated with significant cloudiness.

Eck, T. F.↗

Assessment of the SFC database for analysis and modeling

SFC is one of the four clusters that make up the Integrated Work Control System (IWCS), which will integrate the shuttle processing databases at Kennedy Space Center (KSC). The IWCS framework will enable communication among the four clusters and add new data collection protocols. The Shop Floor Control (SFC) module has been operational for two and a half years; however, at this stage, automatic links to the other 3 modules have not been implemented yet, except for a partial link to IOS (CASPR). SFC revolves around a DB/2 database with PFORMS acting as the database management system (DBMS). PFORMS is an off-the-shelf DB/2 application that provides a set of data entry screens and query forms. The main dynamic entity in the SFC and IOS database is a task; thus, the physical storage location and update privileges are driven by the status of the WAD. As we explored the SFC values, we realized that there was much to do before actually engaging in continuous analysis of the SFC data. Half way into this effort, it was realized that full scale analysis would have to be a future third phase of this effort. So, we concentrated on getting to know the contents of the database, and in establishing an initial set of tools to start the continuous analysis process. Specifically, we set out to: (1) provide specific procedures for statistical models, so as to enhance the TP-OAO office analysis and modeling capabilities; (2) design a data exchange interface; (3) prototype the interface to provide inputs to SCRAM; and (4) design a modeling database. These objectives were set with the expectation that, if met, they would provide former TP-OAO engineers with tools that would help them demonstrate the importance of process-based analyses. The latter, in return, will help them obtain the cooperation of various organizations in charting out their individual processes.

Centeno, Martha A.↗

Reactive Processing of Furan‐Based Monomers via Frontal Ring‐Opening Metathesis Polymerization for High Performance Materials

Frontal ring-opening metathesis polymerization (FROMP) presents an energy-efficient approach to produce high-performance polymers, typically utilizing norbornene derivatives from Diels–Alder reactions. This study broadens the monomer repertoire for FROMP, incorporating the cycloaddition product of biosourced furan compounds and benzyne, namely 1,4-dihydro-1,4-epoxynaphthalene (HEN) derivatives. A computational screening of Diels–Alder products is conducted, selecting products with resistance to retro-Diels–Alder but also sufficient ring strain to facilitate FROMP. The experiments reveal that varying substituents both modulate the FROMP kinetics and enable the creation of thermoplastic materials characterized by different thermomechanical properties. Moreover, HEN-based crosslinkers are designed to enhance the resulting thermomechanical properties at high temperatures (>200 °C). The versatility of such materials is demonstrated through direct ink writing (DIW) to rapidly produce 3D structures without the need for printed supports. This research significantly extends the range of monomers suitable for FROMP, furthering efficient production of high-performance polymeric materials.

36 MATERIALS SCIENCE↗

Quantitative Understanding and Implementation of Screen-printed p+ Poly-Si/Oxide Passivated Contact to Enhance the Efficiency of p-PERC Cells

Investigate the passivation quality of p-TOPCon to evaluate the promise and viability of upgraded p-PERC with p-TOPCon back. Model and simulate the p-PERC and p-TOPCon cells to predict the gain in cell efficiency by implementation of the p-TOPCon Develop a simple process sequence and fabricate p-TOPCon-PERC cell with ≥ 21.0% efficiency

p-TOPCon, P-PERC↗

Mod silver metallization: Screen printing and ink-jet printing

Basic material efforts have proven to be very successful. Adherent and conductive films were achieved. A silver neodecanoate/bismuth 2-ethylhexanoate mixture has given the best results in both single and double layer applications. Another effort is continuing to examine the feasibility of applying metallo-organic deposition films by use of an ink jet printer. Direct line writing would result in a saving of process time and materials. So far, some well defined lines have been printed.

Vest, R. W.↗