Search NASA⌕ Search

SEARCH · Search NASA

Results for “simulation codes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Edge-localized-mode simulation in CFETR steady-state scenario

We report the EPED1 model and self-consistent core-pedestal coupling in integrated modeling are used to design the pedestal structure of the China Fusion Engineering Testing Reactor (CFETR) steady-state scenario. The key parameters, such as β p and q 95 , are based on the grassy edge-localized-mode (ELM) experimental database. In this work, we use the BOUT++ six-field two-fluid code to simulate the onset of the ELM in the CFETR steady-state scenario. The ELM size is around 0.2% in nonlinear simulations, which is in the experimental range of the grassy ELM discharges, 0.1%–1% observed in multiple tokamak devices. Linear and nonlinear simulations show that the dominant high-n ballooning modes peak around n = 40. Compared to type-I ELM crashing dynamics, grassy ELM crashing has a smaller initial crash and is then followed by three phases of turbulence spreading, which are dominated by multi-modes, a high-n mode of n = 45 and low-n mode of n = 5, respectively. In contras to type-I ELM, the perturbation of the high-n mode has a narrow width around ψ = 0.95, and magnetic island formation and reconnection occur only beyond ψ = 0.95, leading to a small initial crash. Mode–mode interaction in the multi-mode coexistence stage stops the growth of individual modes and reduces the transport of particles and heat, and these are the two reasons why the ELM size is small. In–out asymmetry of transient heat flux with a ratio of E out /E in = 3.5 is found during grassy ELM crash. The rise and delay times of the heat flux match the calculation from the free-streaming model. To evaluate the erosion of the divertor target, the energy fluence at the outer divertor target is calculated, which is 0.029 MJ m -2 , 5.5 times smaller than the tungsten melting limit 0.16 MJ m -2 . The calculated energy fluency still follows the experimental scaling law from type-I ELM experiments. The fluctuation eddies in the toroidal direction show a filament structure at the outer mid-plane. Parallel heat flux patterns with a toroidal mode number n = 10 are found at the outer divertor with an amplitude of 680 MW m -2 .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Vertical forces during VDEs in an ITER plasma and the role of halo currents

Vertical displacement events (VDEs) can occur in elongated tokamaks causing large currents to flow in the vessel and other adjacent metallic structures. To better understand the potential magnitude of the associated forces and the role of the so called halo currents'' on them, we have used the M3D-C1 code to simulate potential VDEs in ITER. We used actual values for the vessel resistivity and pre-quench temperatures and, unlike most of the previous studies, the halo region is naturally formed by triggering the thermal quench with an increase in the plasma thermal conductivity. We used the 2D non-linear version of the code and vary the post-thermal quench thermal conductivity profile as well as the boundary temperature in order to generate a wide range of possible cases that could occur in the experiment. We also show that, for a similar condition, increasing the halo current does not increase the total force on the wall since it is offset by a decrease in the toroidal contribution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Demonstration of a new unstructured mesh IMC x-ray transport capability in LAP codes

The Advanced Simulation and Computing (ASC) Transport project’s Jayenne Implicit Monte Carlo (IMC) transport library now includes an unstructured mesh capability and is available in a Lagrangian Applications Project (LAP) code. In this presentation, we discuss recent work by the LAP and Transport projects that provides an IMC transport capability for radiation hydrodynamics in the Lagrangian frame. Verification problems testing the new capabilities have been simulated and analyzed, i.e. Marshak wave, Mach 45, Su-Olsen, picket fence, and crooked pipe, both in one and two dimensions. We also present results on two stretch goal problems: a simplified COAX high energy density physics experiment and a supernova shock simulation. Finally, we identify current limitations and future work needed to bring a full capability to the user community.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Modified versions of the fuel performance codes RTOP and RTOP-CA

RTOP code predicts thermal and mechanical behavior of LWR fuel rods and release of GFPs both in normal stationary and transient operation modes, and transient power ramps, specific to the reactivity-initiated accidents (RIA). Computational domains of the code include fuel column, zirconium cladding, gas under cladding, and fuel microstructure - UO{sub 2} grain and the development of gaseous porosity of different origin during irradiation. RTOP-CA code is based on the RTOP code. It simulates the behavior of a fuel rod with cladding rupture opening and RFPs release into the primary coolant circuit in normal operation modes. The paper presents the results of development and validation of engineering models, which take into account characteristics of the neutron spectrum during the fuel cycle and are integrated into modernized versions of the fuel performance codes RTOP and RTOP-CA. The paper focuses on the detailed description of two models. Four-group neutron-physical engineering model describes burn-out of gadolinium isotopes and calculates spatial power profile in a Gd-doped fuel rod pellet. The second engineering model presented is developed for fast estimation of fuel burnup in case of fuel rod cladding leakage accident. The comparison of the present calculations with the results of calculations by neutron codes shows that the model describes the heat rate distribution and the gadolinium burn-out with sufficient accuracy. The code also calculates the LHR of Gd-doped fuel rods given the heat rate of the adjacent UO{sub 2} fuel rods. This work allows determining the histories of LHR for the Gd-doped fuel rod from the average LHR of FA for various equilibrium WWER fuel cycles, power units and fuel enrichments. The presented model is implemented in the RTOP fuel performance code to calculate the thermomechanical behavior of the fuel rods. An engineering-physical model is developed for fast estimation of {sup 134}Cs/{sup 137}Cs activity ratio in fuel taking into account the parameters of the neutron spectrum during the fuel cycle. Implementation of the model enables to increase the reliability of correct fuel burnup determination in a failed fuel assembly (FA)based on the FERDS activity measurements during reactor operation. Results of the model calculations obtained for the FAs with a higher fuel enrichment and the NPP activity measurements have shown a higher {sup 134}Cs/{sup 137}Cs activity ratio compared to the values for the fuel with enrichment up to 3.6 wt. % in {sup 235}U. Currently, the engineering model is applicable within the range of UO{sub 2} enrichment from 3 to 5 wt. % in {sup 235}U, and Gd{sub 2}O{sub 3} enrichment from 5 to 8 wt. %.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Focusing DIRC Design for Super B

In this paper we present a new design of the Focusing DIRC for the Barrel PID to be used at the proposed Super-B factory. The new imaging optics is made of a solid Fused Silica block with a double folded optics using two mirrors, one cylindrical and one flat, focusing photons on a detector plane conveniently accessible for the detector access. The design assumes that the BaBar bar boxes are re-used without any modification, including the wedges and windows. Each bar box will have its own focusing block, which will contain 40 H-9500 (or H-8500) MaPMTs according to present thinking. There are 12 bar boxes in the entire detector, so the entire SuperB FDIRC system would have 480 MaPMTs. The design is very compact and therefore reduces sensitivity to the background. The chosen MaPMTs are fast enough to be able both to reject the background and to perform the chromatic correction. The 3D optics simulation is coded with the Mathematica program. The work in this paper was a basis of the LDRD proposal made to SLAC in 2009 [1].

43 PARTICLE ACCELERATORS↗

Preliminary critical experiments validation of a lattice physic code LATC - 14415

Core and System Integrated Engine for design and analysis (COSINE) is an integrated nuclear engineering code package, which is being developed by State Nuclear Power Software Development Center (SNPSDC) in China. A lattice physics code named LATC is included in COSINE.LATC is a 2D, steady-state code for modeling PWR fuel. A WIMS-D 69 group micro library based on ENDF/B-VI is used and there are two transportation methods in LATC, such as two steps method (collision probability method for cell homogenization, discrete coordinate method for assembly homogenization) and one step method (MOC). The UO{sub 2} fuel assembly, which may contain guide tubes, burnable poisons such as Integral Fuel Burnable Absorbers (IFBA) / Wet Annular Burnable Absorbers (WABA)/ Pyrexes or control rods etc, can be calculated in LATC. LATC provides the required cross-section data for the core physics simulator analysis code in COSINE. In order to evaluate the quality of the LATC, a strategy of validation is researched and applied to the LATC. Firstly, a validation requirement analysis is performed, and the corresponding critical experiments are collected, and then a critical experimental matrix considering the variety of fuel enrichments, fuel pitch and water to uranium ratio is generated. Finally, a comparison of results between LATC using collision probability and discrete coordinate method and critical experiments are made to make sure that the code works well. According to the validation strategy discussed above, the preliminary validation is carried out and critical experiments are calculated according to the critical experimental matrix and results from LATC code are compared with reference results. The result shows that the calculated results agree well with critical experiments, and do not indicate any significant trends with respect to the various conditions considered. (authors)

42 ENGINEERING↗

Let the Good Times Roll – Energy Code Savings into the Future

Long term benefits of energy codes provide valuable information for setting policies, for state adoption, and in evaluating the cost-benefits of energy codes. Pacific Northwest National Laboratory (PNNL) evaluated the long-term impacts associated with energy codes in residential and commercial buildings from 2010 through 2040. The analysis developed and implemented a new methodology that relied on available data and market trends. The study was heavily vetted with key stakeholders including, DOE, Regional Energy Efficiency Organization network (REEOs), ACEEE and others. Several complex streams of information were combined in the analysis, including results from hundreds of simulation models, codes field study data from DOE, floor space data from EIA's Annual Energy Outlook, and data on projected technology improvements from DOE’s Technology Roadmaps. This paper describes the methodology used for the assessment and presents the energy and economic impacts in terms of site energy savings, consumer energy cost savings, and reduced CO2 emissions at the state level and at aggregated national level. The assessment concluded that model energy codes will save $126 billion for consumers on their utility bills, reduce carbon emissions by 841 metric-million tons, and save 12.82 quads of primary energy on a cumulative basis from 2010 through 2040. The results are being used by DOE to underline their role in improving building energy efficiency, by REEOs and states for promoting state code adoption, and by ACEEE and others to perform their own analyses related to energy codes.

buidling energy codes, Impacts of Energy Codes↗

Development of Whole System Digital Twins for Advanced Reactors: Leveraging Graph Neural Networks and SAM Simulations

Here, in this work, we introduce a novel method to develop whole system digital twins (DTs) for advanced nuclear reactors. This method treats a complex reactor system as a heterogeneous graph: with the system components as different types of graph nodes and their physical interconnections as edges. Based on the heterogeneous graph, a graph neural network combining graph convolution and temporal node attention is developed as the DT, facilitating a comprehensive understanding of the system's dynamic behavior. By utilizing the System Analysis Module (SAM) code for simulating various operational transients, we develop a graph-based database that trains the DT. This DT is characterized by two primary functions: It can infer the entire system's status using sparse node information, and it can predict the progress of transients based on current and historical system information. Our approach is validated through case studies on the Experimental Breeder Reactor II (EBR-II) system and a generic Fluoride-salt-cooled High-temperature Reactor (gFHR), demonstrating the DT's accuracy in forecasting operational transients. The DT's rapid computation capabilities enhance its potential for supporting advanced reactor operations, offering benefits in intelligent simulation, autonomous control, and anomaly detection, paving the way for improved safety analysis and intelligent component health management for advanced reactor systems and reducing their operations and maintenance cost.

EBR-II↗

Technical Note: Improved implementation of doppler broadening in MCNP5

Purpose: Incoherent scattering has a substantial effect on spectroscopic measurements and simulations. Many general-purpose Monte Carlo codes include models that account for the effects of bound electrons on incoherent scattering, including Doppler broadening (DB). This work investigates the DB model used in the Monte Carlo N-particle transport code (MCNP5). Methods: Simulations were run with three versions of MCNP5: v1.51, v1.60, and a modified form of v1.60 (v1.60m). All simulations used the MCPLIB04 photon data library, which presents the electron subshell data for incoherent scattering in the form of a probability density function. In v1.60m, the source code was altered to sample the electron subshell from a cumulative density function instead. Each version of the code was tested using an identical set of simulations that investigated DB in a slab of silicon at scattering angles of 15 Degree-Sign , 30 Degree-Sign , and 45 Degree-Sign . For each angle, simulations were run for multiple energies between 200 keV and 800 keV. The spectrum of singly-scattered photons at the exit of the slab was scored. Spectra were analytically calculated for comparison. Results: In v1.51, DB was modeled for incident photon energies below 760 keV, 384 keV, and 260 keV at scattering angles of 15 Degree-Sign , 30 Degree-Sign , and 45 Degree-Sign , respectively. Above these energy thresholds, v1.51 did not model DB. The spectra calculated using v1.60 and v1.60m exhibited DB for all energy-angle combinations; however, v1.60m, exhibited more energy broadening than did v1.60. The spectra calculated with v1.60m agreed with the analytical calculations. Conclusions: MCNP5 v1.51 and v1.60 model partial broadening when used with the MCPLIB04 data library. MCNP5 v1.60m models DB more accurately due to the form of the electron subshell data. In response to these results, Los Alamos National Laboratory has released a new photon data library, MCPLIB84, that presents the electron subshell data in cumulative distribution form. MCNP5 v1.60 should be used with this library when incoherent scattering has a significant impact on simulation results.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Coupling of CTF and TRANSFORM using the Functional Mockup Interface

An in-memory coupling between the sub-channel thermal hydraulics code COBRA-TF (CTF), which is included in the Virtual Environment for Reactor Applications (VERA), and the systems code Transient Simulation Framework of Reconfigurable Models (TRANSFORM) was developed in this work. Data exchange is accomplished by using the Functional Mock-Up Interface (FMI), an open standard for coupling dynamic systems models together. The FMI-based coupling necessitated the development of a novel FORTRAN wrapper for communicating with Functional Mock-Up Units. This wrapper will facilitate future FMI-based code couplings with other FORTRAN-based programs. CTF-TRANSFORM is exercised on a simplified Molten Salt Reactor Experiment (MSRE) model in steady-state and transient configurations. The coupled CTF-TRANSFORM model is shown to predict core temperature deltas similar to those available in historical MSRE operational data and is shown to be robust to fast power transients.The coupling paves the way to performing sensitivity and design studies impossible with VERA/CTF alone, in which secondary and tertiary loop operating conditions and design parameters may be perturbed and their impact on the core operating conditions studied.

97 MATHEMATICS AND COMPUTING↗

Full-sky beam convolution for cosmic microwave background applications

We introduce a publicly available full-sky beam convolution code library intended to inform the design of future cosmic microwave background (CMB) instruments and help current experiments probe potential systematic effects. The code can be used to assess the impact of optical systematics on all stages of data reduction for a realistic experiment, including analyses beyond power spectrum estimation, by generating signal timelines that may serve as input to full analysis pipelines. The design and mathematical framework of the Python code is discussed along with a few simple benchmarking results. We present a simple two-lens refracting telescope design and use it together with the code to simulate a year-long dataset for 400 detectors scanning the sky on a satellite instrument. The simulation results identify a number of sub-leading optical non-idealities and demonstrate significant B-mode residuals caused by extended sidelobes that are sensitive to polarized radiation from the Galaxy. For the proposed design and satellite scanning strategy, we show that a full physical optics beam model generates B-mode systematics that differ significantly from the simpler elliptical Gaussian model. The code is available at https://github.com/adrijd/beamconv

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Orb5: A global electromagnetic gyrokinetic code using the PIC approach in toroidal geometry

This paper presents the current state of the global gyrokinetic code Orb5 as an update of the previous reference [Jolliet et al., Comp. Phys. Commun. 177 409 (2007)]. The Orb5 code solves the electromagnetic VlasovMaxwell system of equations using a PIC scheme and also includes collisions and strong flows. The code assumes multiple gyrokinetic ion species at all wavelengths for the polarization density and drift-kinetic electrons. Variants of the physical model can be selected for electrons such as assuming an adiabatic response or a “hybrid” model in which passing electrons are assumed adiabatic and trapped electrons are drift-kinetic. A Fourier filter as well as various control variates and noise reduction techniques enable simulations with good signal-to-noise ratios at a limited numerical cost. They are completed with different momentum and zonal flow-conserving heat sources allowing for temperature-gradient and flux-driven simulations. The code, which runs on both CPUs and GPUs, is well benchmarked against other similar codes and analytical predictions, and shows good scalability up to thousands of nodes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of the Spatial Extent of Multiple Harmonic Layers

An analytic model for single particle motion in the presence of a wave field and multiple cyclotron harmonics is developed and investigated. The model suggests that even in the absence of Doppler broadening, cyclotron harmonic layers have finite spatial extent. This allows for particles to interact with more than one harmonic layer simultaneously, provided the layers are tightly packed. The latter phenomenon is investigated in the context of the model using symplectic mapping techniques. Then the model behavior is compared with numerical simulations of neutral beam particle trajectories in NSTX using the full-orbit code SPIRAL.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Particle-in-cell simulations of burning inertial confinement fusion capsule implosions

Anomalies observed in the neutron spectral shift of high-yield shots at the National Ignition Facility (NIF) suggest the presence of suprathermal ions [E. P. Hartouni et al., Nat. Phys. 19, 72 (2023)], implying that kinetic effects play a significant role in burning inertial confinement fusion (ICF) plasmas. Furthermore, recent measurements of reaction-in-flight (RIF) neutrons offer a direct probe of the stopping power in the burning fuel region of high-energy alpha particles and up-scattered fuel ions. We have developed the particle-in-cell code PICNIC, an exactly energy-conserving particle-in-cell Monte-Carlo collision (PIC-MCC) code to simulate the burn stage in ICF. We present results from 1D spherical simulations of NIF shot N210808, which was the first to exceed the Lawson criterion for laser fusion. We find that the suprathermal ions generated by large-angle Rutherford and nuclear elastic scattering (NES) with fusion alphas produce an alpha knock-on neutron (AKN) signal consistent with the extent and relative yield of the AKN spectrum identified in ignition experiments at the NIF. Furthermore, we also find that the inclusion of large-angle scattering physics does not explain the anomalously large spectral shift observed in the experiment.

High-energy-density plasmas↗

TU-AB-BRC-07: Efficiency of An IAEA Phase-Space Source for a Low Energy X-Ray Tube Using Egs++

Purpose: To extend the capability of the EGSnrc C++ class library (egs++) to write and read IAEA phase-space files as a particle source, and to assess the relative efficiency gain in dose calculation using an IAEA phase-space source for modelling a miniature low energy x-ray source. Methods: We created a new ausgab object to score particles exiting a user-defined geometry and write them to an IAEA phase-space file. A new particle source was created to read from IAEA phase-space data. With these tools, a phase-space file was generated for particles exiting a miniature 50 kVp x-ray tube (The INTRABEAM System, Carl Zeiss). The phase-space source was validated by comparing calculated PDDs with a full electron source simulation of the INTRABEAM. The dose calculation efficiency gain of the phase-space source was determined relative to the full simulation. The efficiency gain as a function of i) depth in water, and ii) job parallelization was investigated. Results: The phase-space and electron source PDDs were found to agree to 0.5% RMS, comparable to statistical uncertainties. The use of a phase-space source for the INTRABEAM led to a relative efficiency gain of greater than 20 over the full electron source simulation, with an increase of up to a factor of 196. The efficiency gain was found to decrease with depth in water, due to the influence of scattering. Job parallelization (across 2 to 256 cores) was not found to have any detrimental effect on efficiency gain. Conclusion: A set of tools has been developed for writing and reading IAEA phase-space files, which can be used with any egs++ user code. For simulation of a low energy x-ray tube, the use of a phase-space source was found to increase the relative dose calculation efficiency by factor of up to 196. The authors acknowledge partial support by the CREATE Medical Physics Research Training Network grant of the Natural Sciences and Engineering Research Council (Grant No. 432290).

60 APPLIED LIFE SCIENCES↗

On producing CO 2 from subsurface reservoirs: simulations of liquid-gas phase change caused by decompression

Carbon dioxide (CO 2 ) extraction from deep reservoirs is currently important in CO 2 enhanced oil recovery (EOR) and may become more important in the future if interim CO 2 storage becomes common. In late 2014, we were involved in a production test of liquid CO 2 from the Middle Duperow dolostone at Kevin Dome, Montana. The test resulted in lowering the temperature at the well bottom to ~2 °C, and showed that the well and reservoir had very low CO 2 productivity. We have used the CO 2 modeling capabilities of the TOUGH codes to simulate the test and to show that liquid CO 2 in the reservoir changes to gas phase as the pressure is lowered in the well during production testing. The associated phase change and decompression combine to drastically lower the bottom-hole temperature, creating the potential for water ice or CO 2 hydrate to form. By hypothesizing a relatively high-permeability damage zone near the well surrounded by lower permeability reservoir rock, we can match the observed pressure, temperature, and production rate. Moving from the Kevin Dome test to the question of CO 2 extraction from deep reservoirs in general, we carried out a parametric study to investigate the effects of reservoir depth and transmissivity on CO 2 production rate for a prototypical reservoir. Simulations show that depth and high transmissivity favor productivity. Complex phase changes within the ranges of P-T encountered in typical CO 2 production wells affect production rates. The results of our parametric study may be useful for the preliminary feasibility assessment of CCO 2 extraction from deep reservoirs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Numerical Study Of Melted Particles Crush Metallic Substrates And The Interaction Between Particles And A Plasma Beam In The Thermal Projection Process

Plasma spray processes have been widely used to produce high performance coatings of a wide range of Materials (metallic, non-metallic, ceramics), offering protection from, eg. wear, extreme temperature, chemical attack and environmental corrosion. To obtain good quality coatings, spray parameters must be carefully selected. Due to the large variety in process parameters, it is difficult to optimize the process for each specific coating and substrate combinations. Furthermore modelling the spray process allows a better understanding of the process sequences during thermal spraying. Good agreement of the virtual spraying process with the real coating formation is achieved by modelling the particular process steps. The simulation of coating formation to estimate the process parameters is an important tool to develop new coating structures with defined properties. In this work, the process of plasma sprayed coating has been analyzed by numerical simulation. Commercial code is used to predict the plasma jet characteristics, plasma--particle interaction, and coating formation. Using this model we can obtain coating microstructure and characteristics which form a foundation for further improvement of an advanced ceramic coating build up model.

36 MATERIALS SCIENCE↗