Search NASA⌕ Search

SEARCH · Search NASA

Results for “small scale processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

GeoLoRA: Geometric integration for parameter efficient fine-tuning

Low-Rank Adaptation (LoRA) has become a widely used method for parameter-efficient fine-tuning of large-scale, pre-trained neural networks. However, LoRA and its extensions face several challenges, including the need for rank adaptivity, robustness, and computational efficiency during the fine-tuning process. We introduce GeoLoRA, a novel approach that addresses these limitations by leveraging dynamical low-rank approximation theory. GeoLoRA requires only a single backpropagation pass over the small-rank adapters, significantly reducing computational cost as compared to similar dynamical low-rank training methods and making it faster than popular baselines such as AdaLoRA. This allows GeoLoRA to efficiently adapt the allocated parameter budget across the model, achieving smaller low-rank adapters compared to heuristic methods like AdaLoRA and LoRA, while maintaining critical convergence, descent, and error-bound theoretical guarantees. The resulting method is not only more efficient but also more robust to varying hyperparameter settings. We demonstrate the effectiveness of GeoLoRA on several state-of-the-art benchmarks, showing that it outperforms existing methods in both accuracy and computational efficiency.

Schotthoefer, Steffen [ORNL] (ORCID:00000002156965↗

20th century changes in carbon isotopes and water-use efficiency: tree-ring-based evaluation of the CLM4.5 and LPX-Bern models

Measurements of the stable carbon isotope ratio ( δ 13 C) on annual tree rings offer new opportunities to evaluate mechanisms of variations in photosynthesis and stomatal conductance under changing CO 2 and climate conditions, especially in conjunction with process-based biogeochemical model simulations. The isotopic discrimination is indicative of the ratio between the CO 2 partial pressure in the intercellular cavities and the atmosphere ( c i / c a ) and of the ratio of assimilation to stomatal conductance, termed intrinsic water-use efficiency (iWUE). We performed isotope-enabled simulations over the industrial period with the land biosphere module (CLM4.5) of the Community Earth System Model and the Land Surface Processes and Exchanges (LPX-Bern) dynamic global vegetation model. Results for C3 tree species show good agreement with a global compilation of δ 13 C measurements on leaves, though modeled 13 C discrimination by C3 trees is smaller in arid regions than measured. A compilation of 76 tree-ring records, mainly from Europe, boreal Asia, and western North America, suggests on average small 20th century changes in isotopic discrimination and in c i / c a and an increase in iWUE of about 27% since 1900. LPX-Bern results match these century-scale reconstructions, supporting the idea that the physiology of stomata has evolved to optimize trade-offs between carbon gain by assimilation and water loss by transpiration. In contrast, CLM4.5 simulates an increase in discrimination and in turn a change in iWUE that is almost twice as large as that revealed by the tree-ring data. Factorial simulations show that these changes are mainly in response to rising atmospheric CO 2 . The results suggest that the downregulation of c i / c a and of photosynthesis by nitrogen limitation is possibly too strong in the standard setup of CLM4.5 or that there may be problems associated with the implementation of conductance, assimilation, and related adjustment processes on long-term environmental changes.

54 ENVIRONMENTAL SCIENCES↗

νBDX: a Coherent Elastic Neutrino Nucleus Scattering (CEνNS) experiment at Jefferson Lab

Particle physics is an ever-changing field seeking to explain phenomena that lie at the limits of our current knowledge. Among discovered and hypothesized interactions, Coherent Elastic Neutrino-Nucleus Scattering (CE?NS) stands out as a fascinating and elusive phenomenon, offering a unique window into the nature of neutrinos and their interactions with matter. CE?NS, a process predicted by the Standard Model, represents one of the subtle ways in which neutrinos can interact with atomic nuclei. Unlike other neutrinonucleus interactions, CE?NS occurs coherently, meaning that the entire nucleus collectively responds to the neutrino-mediated weak force, resulting in small energy transfers to the nucleus as a whole. The extremely rare nature of CE?NS events presents a formidable challenge to experimenters seeking to detect and study these interactions. Recent advances in detector technologies and the implementation of large-scale experiments, such as coherent neutrino scattering experiments at research facilities around the world, have opened up new avenues for exploring this elusive phenomenon. These experiments aim not only to observe CE?NS directly but also to extract valuable information on neutrino properties, nuclear structure, and potential deviations from the Standard Model. This thesis aims to study the feasibility of an experiment to study CE?NS at The Thomas Jefferson National Accelerator Facility, Newport News, VA, USA. This would be an experiment that exploits the production of neutrinos by an electron beam dumped on a thick target (the beam dump). The large quantity of neutrinos produced and their energy profile are well suited to the purpose of studying the CE?NS. In my thesis, I will start from previous studies on CE?NS and from theoretical considerations regarding the process, then quantify the expected events for a hypothetical experiment and possible backgrounds through simulations aimed at optimizing the geometry of the future detector. I will also show some tests on selected detector components that will be part of a first prototype.

Grazzi, Stefano↗

Impact and volcanism - A momentum scaling law for erosion

The controversy that raged through the 1950s to 1970s over similarities and differences between meteorite impact and volcanic processes is revisited. We propose that there are quantitative similarities in erosion caused by high-speed ejecta produced by either impacts or volcanic processes. Field and petrographic data from the Manicouagan impact crater, Canada, are used to demonstrate that, during the emplacement of the impact melt sheet, erosion occurred at a rate of 2562 kg/sq m per s. Field data for the Mount St. Helens lateral blast of May 18, 1980, suggest an erosion rate of 21 kg/sq m per s, and field data for a small pyroclastic flow on August 7, 1980, suggest an erosion rate of about 14 kg /sq m per s. It is proposed that these three rates were determined dominantly by the momentum of the ejecta, and a quantitative formulation based on lofting theory is given. A new application of the Monte Carlo approach to analysis provides minimum, most likely, and maximum estimates for both the field and the theoretical analyses. The substantial erosion that occurs by fast moving flows results in mixing of stratigraphic components over large distances and to very fine scales.

Simonds, Charles H.↗

Parameterizations of Entrainment-Mixing Mechanisms and their Effects on Cloud Droplet Spectral Width Based on Numerical Simulations

Entrainment-mixing mechanisms significantly affect cloud droplet number concentration, radius, and spectral shape. Quantitative examination of entrainment-mixing effects on cloud droplet spectral width is lacking. Here, we examine the effects of entrainment-mixing processes on cloud microphysics by 12,218 different setups, each simulated 10 times using the Explicit Mixing Parcel Model (EMPM) driven by the observational data from the Third Tibetan Plateau Atmospheric Scientific Experiment (TIPEX-III) campaign. Parameterizations of entrainment-mixing mechanisms are developed by relating homogeneous mixing degree to transition scale number that depends on the dissipation rate and droplet evaporation time scale. The correlation between relative dispersion of cloud droplet size distribution and homogeneous mixing degree changes from negative to positive with the decreasing homogeneous mixing degree. The different relationships are closely related to the competition between complete and partial droplet evaporation and the number concentration of small droplets, which are quantitatively described by two newly introduced dimensionless numbers. The competition is significantly affected by relative humidity and mixing fraction of entrained air as well as turbulence dissipation rate, but not much by cloud droplet number concentration. Especially, when relative humidity and dissipation rate are high, there is only a negative correlation. This study sheds new light on generalizing the homogeneous/inhomogeneous concept by considering relative dispersion, and also provides parameterizations of entrainment-mixing processes and relative dispersion for atmospheric models.

54 ENVIRONMENTAL SCIENCES↗

Geometry and spatial distribution of lenticulae on Europa

The surface of Europa contains several types of roughly elliptical features, collectively called lenticulae. Lenticulae may have positive relief (domes) or negative relief (pits), may disrupt the crust (chaos), or discolor the surface (spots); some lenticulae have attributes of both domes and chaos (dome/chaos). In this study, we map the location, dimensions and shapes of all lenticulae and their interactions with other lenticulae and lineaments. We find that (1) pits and domes have similar sizes; (2) chaos are larger than the other lenticulae; (3) pits are clustered within the trailing antijovian quadrant and the leading subjovian quadrant whereas domes, dome/chaos, and chaos terrains are more uniformly distributed; (4) the areal density for all lenticulae is not uniform; (5) lenticulae do not divert the path of younger lineaments such as ridges. Taken together, these observations are consistent with conceptual models in which lenticulae are created by intrusion of liquid water bodies, or convection within, the ice shell. Additionally, the observations are consistent with the notion that each type of lenticula is a surface expression of dynamics within the ice shell at a different stage of lenticulae evolution. The similar size and shape of pits and domes suggests that one may evolve into the other. Because domes are more numerous and more uniformly distributed than pits, they are more likely to represent the end stage of this evolution, assuming the end-stage leaves a longer-lasting surface expression. Models also predict that larger features are more likely to disrupt the crust, which is consistent with dome/chaos and chaos being larger than pits and domes. We find no examples of lineaments offsetting pits but lineaments do cross some chaos. Pits also have a preferred northwest-southeast elongation, whereas domes, dome/chaos, and chaos do not have a preferred orientation. If lenticulae orientation is influenced by crustal stress, then pits may have formed during a shorter time interval than the other features. As a result, pits may sample a shorter, more recent time period than domes, dome/chaos, and chaos, consistent with pits being the earliest stage in the evolution of lenticulae. In conclusion, we find no strong evidence that lineaments are deflected by lenticulae, implying either that the stresses created by lenticulae are too small to influence lineaments, or that the complete evolution of lenticulae occurs on a time scale that is short compared to the time between the formation of lineaments at a given location.

58 GEOSCIENCES↗

Mapping ephemeral stream networks in desert environments using very-high-spatial-resolution multispectral remote sensing

In this paper, understanding the spatial patterns of ephemeral streams is crucial for understanding how hydrologic processes influence the abundance and distribution of wildlife habitats in desert regions. Available methods for mapping ephemeral streams at the watershed scale typically underestimate the size of channel networks. Although remote sensing is an effective means of collecting data and obtaining information on large, inaccessible areas, conventional techniques for extracting channel features are not sufficient in regions that have small topographic gradients and subtle target-background spectral contrast. By using very high resolution multispectral imagery, we developed a new algorithm that applies landscape information to map ephemeral channels in desert regions of the Southwestern United States where utility-scale solar energy development is occurring. Knowledge about landscape features and structures was integrated into the algorithm using a series of spectral transformation and spatial statistical operations to integrate information about landscape features and structures. The algorithm extracted ephemeral stream channels at a local scale, with the result that approximately 900% more ephemeral streams was identified than what were identified by using the U.S. Geological Survey’s National Hydrography Dataset. The accuracy of the algorithm in detecting channel areas was as high as 92%, and its accuracy in delineating channel center lines was 91% when compared to a subset of channel networks that were digitized by using the very high resolution imagery. Although the algorithm captured stream channels in desert landscapes across various channel sizes and forms, it often underestimated stream headwaters and channels obscured by bright soils and sparse vegetation. While further improvement is warranted, the algorithm provides an effective means of obtaining detailed information about ephemeral streams, and it could make a significant contribution toward improving the hydrological modelling of desert environments.

47 OTHER INSTRUMENTATION↗

Probing gluon saturation with forward di-hadron correlations in proton-nucleus collisions

We present a detailed numerical investigation of semi-inclusive forward di-hadron production in proton–nucleus collisions employing the Color Glass Condensate effective theory. We focus on the regime where di-hadrons are produced nearly back-to-back in the transverse plane, thereby justifying a transverse-momentum-dependent factorization approach in terms of small-x gluon distributions. Our computation integrates several key elements: i) non-linear rapidity evolution via the Balitsky–Kovchegov equation with running coupling, ii) both perturbative and non-perturbative Sudakov resummation, and iii) a phenomenologically constrained model for the initial conditions for small-x gluon distributions. We compare this phenomenological framework to experimental data from the STAR Collaboration on azimuthal correlations in forward di-pion production in both proton–proton and proton–gold collisions. We analyze the systematic theoretical uncertainties associated with the saturation scales of nuclei at the initial scale for rapidity evolution and with those associated with the hadronization process. Finally, we make predictions for the kinematics anticipated to be covered by the ALICE Forward Calorimeter (FoCal) upgrade at the Large Hadron Collider.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Reduced density matrix hybrid approach: Application to electronic energy transfer

Electronic energy transfer in the condensed phase, such as that occurring in photosynthetic complexes, frequently occurs in regimes where the energy scales of the system and environment are similar. This situation provides a challenge to theoretical investigation since most approaches are accurate only when a certain energetic parameter is small compared to others in the problem. Here we show that in these difficult regimes, the Ehrenfest approach provides a good starting point for a dynamical description of the energy transfer process due to its ability to accurately treat coupling to slow environmental modes. To further improve on the accuracy of the Ehrenfest approach, we use our reduced density matrix hybrid framework to treat the faster environmental modes quantum mechanically, at the level of a perturbative master equation. This combined approach is shown to provide an efficient and quantitative description of electronic energy transfer in a model dimer and the Fenna-Matthews-Olson complex and is used to investigate the effect of environmental preparation on the resulting dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Non-equilibrium phenomena and kinetic pathways in self-assembled polyelectrolyte complexes

Polyelectrolyte complexation has been conventionally focused on the thermodynamic states, where assemblies have equilibrated in solutions. Far less attention has been given to complex systems that are kinetically trapped at non-equilibrium states. A combination of time-resolved dynamic light scattering, small angle X-ray scattering (SAXS), and cryogenic transmission electron microscopy (Cryo-TEM) was employed here to investigate the internal structures and morphological evolution of non-equilibrium aggregates forming from a pair of two strong block polyelectrolytes over wide time and length scales. The role of formation pathways of electrostatically driven aggregates was assessed using two processing protocols: direct dissolution and salt annealing. The former led to thermodynamically stable products, while the latter resulted in kinetically trapped transient structures. After adding salt, the metastable structures gradually transformed into stable products. Cryo-TEM images showed the interconnected irregular morphologies of the aggregates, and SAXS data revealed the presence of fuzzy globular complexes with R-g similar to 10 nm within them. A two-step process in the time-dependent structural transformation was found and characterized by a fast breakdown of interconnected transient aggregates followed by a slow redistribution of the incipient individual electrostatic assemblies. Furthermore, the prolonged aggregate disintegration process fitting to a stretched exponential function unveiled the broad relaxation distribution and significant structural heterogeneity in these polyelectrolyte complex nanoaggregates. This work brings new insight into the comprehension of non-equilibrium phenomena in self-assembled electrostatic assemblies and represents a first step toward constructing far-from-equilibrium polyelectrolyte complexes de novo for future applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Leveraging Pre-Built Catalogs and Object-Level Scheduling to Eliminate I/O Bottlenecks in HPC Environments

Modern High-Performance Computing (HPC) environments face mounting challenges due to the shift from large to small file datasets, along with an increasing number of users and parallelized applications. As HPC systems rely on Parallel File Systems (PFS), such as Lustre for data processing, performance bottlenecks stemming from Object Storage Target (OST) contention have become a significant concern. Existing solutions, such as LADS with its object-level scheduling approach, fall short in large-scale HPC environments due to their inability to effectively address metadata I/O bottlenecks and the growing number of I/O processes. This study highlights the pressing need for a comprehensive solution that tackles both OST contention and metadata I/O challenges in diverse HPC workloads. To address these challenges, we propose SwiftLoad, an object-level I/O scheduling framework that leverages a metadata catalog to enhance the performance and efficiency of parallel HPC utilities. The adoption of the metadata catalog mitigates the metadata I/O bottlenecks that commonly occur in HPC utilities, a challenge that is particularly pronounced in object-level I/O scheduling. SwiftLoad addresses OST contention and the uneven distribution of I/O processes across different OSTs through mathematical modeling and incorporates a Loader Configuration Module to regulate the number of I/O processes. Evaluated with two representative utilities—data deduplication profiling and data augmentation—SwiftLoad achieved performance improvements of up to 5.63x and 11.0x, respectively, on a production supercomputer.

HPC↗

Pretraining Billion-Scale Geospatial Foundational Models on Frontier

As AI workloads increase in scope, generalization capability becomes challenging for small task-specific models and their demand for large amounts of labeled training samples increases. On the contrary, Foundation Models (FMs) are trained with internet-scale unlabeled data via self-supervised learning and have been shown to adapt to various tasks with minimal fine-tuning. Although large FMs have demonstrated significant impact in natural language processing and computer vision, efforts toward FMs for geospatial applications have been restricted to smaller size models, as pretraining larger models requires very large computing resources equipped with state-of-the-art hardware accelerators. Current satellite constellations collect 100+TBs of data a day, resulting in images that are billions of pixels and multimodal in nature. Such geospatial data poses unique challenges opening up new opportunities to develop FMs. We investigate billion scale FMs and HPC training profiles for geospatial applications by pretraining on publicly available data. We studied from end-to-end the performance and impact in the solution by scaling the model size. Our larger 3B parameter size model achieves up to 30% improvement in top1 scene classification accuracy when comparing a 100M parameter model. Moreover, we detail performance experiments on the Frontier supercomputer, America's first exascale system, where we study different model and data parallel approaches using PyTorch's Fully Sharded Data Parallel library. Specifically, we study variants of the Vision Transformer architecture (ViT), conducting performance analysis for ViT models with size up to 15B parameters. By discussing throughput and performance bottlenecks under different parallelism configurations, we offer insights on how to leverage such leadership-class HPC resources when developing large models for geospatial imagery applications.

Tsaris, Aristeidis (aris)↗

Effect of Proximity of Features on the Damage Threshold During Submicron Additive Manufacturing Via Two-Photon Polymerization

Two-photon polymerization (TPP) is a laser writing process that enables fabrication of millimeter scale three-dimensional (3D) structures with submicron features. In TPP, writing is achieved via nonlinear two-photon absorption that occurs at high laser intensities. Thus, it is essential to carefully select the incident power to prevent laser damage during polymerization. Currently, the feasible range of laser power is identified by writing small test patterns at varying power levels. Here in this paper, we demonstrate that the results of these tests cannot be generalized, because the damage threshold power depends on the proximity of features and reduces by as much as 47% for overlapping features. We have identified that this reduction occurs primarily due to an increase in the single-photon absorptivity of the resin after curing. We have captured the damage from proximity effects via X-ray 3D computed tomography (CT) images of a non-homogenous part that has varying feature density. Part damage manifests as internal spherical voids that arise due to boiling of the resist. We have empirically quantified this proximity effect by identifying the damage threshold power at different writing speeds and feature overlap spacings. In addition, we present a first-order analytical model that captures the scaling of this proximity effect. Based on this model and the experiments, we have identified that the proximity effect is more significant at high writing speeds; therefore, it adversely affects the scalability of manufacturing. The scaling laws and the empirical data generated here can be used to select the appropriate TPP writing parameters.

36 MATERIALS SCIENCE↗

SubKit

Generating a CTF (thermal-hydraulics subchannel code) model can be time consuming and error prone because of the rigid formatting of the input file and the amount of input requirements. Because of the structured input format, making small changes to a model can require large scale changes to the input file. Furthermore, a user typically has to perform calculations to develop CTF input parameters from actual model geometry. Changing model geometry requires re-calculating input parameters and copying them from wherever the calculation was performed, be it a script, spreadsheet, or piece of paper. This process complicates the quality assurance process for that model and makes changing the model more difficult. CtfDeckBuilder is an object-oriented Python interface to CTF that allows the user to build a CTF model in Python. The user no longer needs to interface with the CTF input file when using the CtfDeckBuilder. The interface reduces the information required of the user by offering defaults for most modeling options provided by CTF. The user can perform calculations directly in Python when building the model so that calculations stay with the model itself.

Salko, Jr., RobertK↗

Discrete Fracture Network Modeling to Estimate Upscaled Parameters for the Topopah Spring, Lava Flow, and Tiva Canyon Aquifers at Pahute Mesa, Nevada National Security Site

This report describes the results of Discrete Fracture Network (DFN) simulations for the Topopah Spring Aquifer (TSA), Lava Flow Aquifer, and Tiva Canyon Aquifer (TCA), at Pahute Mesa on the Nevada National Security Site (NNSS), formerly the Nevada Test Site. The research focuses on calculating upscaled groundwater flow and contaminant transport parameters using DFNs generated according to fracture characteristics observed in the TSA, LFA and TCA at Pahute Mesa. The highly fractured and heterogeneous nature of these aquifers makes them candidates for stochastic DFN modeling of radionuclide transport on a small scale with subsequent upscaling. One hundred independent DFN realizations are generated for each aquifer, and the upscaled parameters for continuum simulations of subsurface flow and transport in fractured media at Pahute Mesa are calculated. Our goal is to implement a modeling approach that can translate parameters to larger-scale models that account for local-scale flow and transport processes, such as channelization of flow and transport along a few well connected, large fractures. Additionally, to simulate advective and advective-diffusive transport through the fracture networks, the Time Domain Random Walk (TDRW) approach is applied to account for matrix diffusion into a finite half-space. Moreover, a novel approach to calculate dynamic (active) fracture surface area to reflect flow channeling is implemented. This work will improve the representation of radionuclide transport processes in largescale, regulatory-focused models by providing estimates of hard-to-measure flow and contaminant transport parameters at large scales. In this report, we (1) show recent results of flow and transport simulations on multiple DFN realizations of the TSA, LFA, TCA; (2) discuss the resulting distributions of estimated upscaled parameters; (3) describe the estimation of upscaled parameters for an equivalent parallel-plate continuum model and (4) present a comparison between simulated transport from the equivalent continuum model and an actual DFN.

54 ENVIRONMENTAL SCIENCES↗

Development and Advanced Testing of DPC Cement Fillers

The fillers research and development (R&D) program, mostly experimental, is part of a broader R&D program that includes new process modeling and performance assessment of criticality effects and the overall importance of criticality to repository performance (consequence screening). A literature research and consultation effort with experts by Hardin and Brady (2018) identified several potentially effective and workable filler materials including cements (primarily phosphate based), moltenmetal alloys, and low-temperature glasses. Filler attributes were defined, and the preliminary lists were compared qualitatively. Further comparative analysis will be done (e.g., cost estimates) after experimental screening has narrowed the list of alternatives. The research presented here is focused Sandia’s efforts for the development of phosphate-based cement fillers. Molten metal filler research is an ongoing activity at Oak Ridge National Laboratories and is not discussed herein. After the completion of the FY20 research effort the following cement filler compositions were selected for further experimental development work and advanced testing in FY21: 1. Aluminum phosphate cements (APCs); more specifically aluminum oxide / aluminum phosphate (Al 2 O 3 / AlPO 4 ) cements in which Al 2 O 3 serves as the filler material bound by an AlPO 4 binder formed by the reaction of Al 2 O 3 with various phosphate sources; 2. Wollastonite phosphate cements (WPCs), specifically wollastonite and aluminum or calcium aluminum phosphates in which CaSiO 3 serves as the filler material bound by a calcium phosphate that serves as the binder; and 3. Calcium aluminate phosphate cements (CAPCs) specifically grossite (CaAl 4 O 7 ) and hibonite (CaAl 11 O 18 ) fillers bound by an aluminum phosphate that serves as the binder. This effort focused on the optimization and subsequent processing of these three cements to achieve dense and well-consolidated monolithic samples. Upon completion of the FY21 effort the aluminum phosphate cements (APCs) and the calcium aluminate phosphate cements (CAPCs) show the most promise for advanced testing and scale up. We will begin the work in FY22 focused on testing the performance of these two cements in small scale DPCs as well as advanced materials testing to evaluate cement performance under expected radiation doses and representative post-closure geochemical environments.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Development of Turbulent Magnetic Reconnection in a Magnetic Island

In this paper, with two-dimensional particle-in-cell simulations, we report that the electron Kelvin–Helmholtz instability is unstable in the current layer associated with a large-scale magnetic island, which is formed in multiple X-line guide field reconnections. The current sheet is fragmented into many small current sheets with widths down to the order of the electron inertial length. Secondary magnetic reconnection then occurs in these fragmented current sheets, which leads to a turbulent state. The electrons are highly energized in such a process.

79 ASTRONOMY AND ASTROPHYSICS↗

Heat shield characterization: Outer planet atmospheric entry probe

A full scale carbon phenolic heat shield was fabricated for the Outer Planet Probe in order to demonstrate the feasibility of molding large carbon phenolic parts with a new fabrication processing method (multistep). The sphere-cone heat shield was molded as an integral unit with the nose cap plies configured into a double inverse chevron shape to achieve the desired ply orientation. The fabrication activity was successful and the feasibility of the multistep processing technology was established. Delaminations or unbonded plies were visible on the heat shield and resulted from excessive loss of resin and lack of sufficient pressure applied on the part during the curing cycle. A comprehensive heat shield characterization test program was conducted, including: nondestructive tests with the full scale heat shield and thermal and mechanical property tests with small test specimen.

Mezines, S. A.↗